From c41572330d6038172c98b6837df10e87e82e5dec Mon Sep 17 00:00:00 2001 From: Oliver Smith Date: Wed, 6 Mar 2019 20:23:01 +0100 Subject: Document subscribers create on demand feature Add a new section in the subscribers chapter, with detailed explanation of the use cases and related OsmoHLR and OsmoMSC configuration. Related: OS#2542 Change-Id: I2dd4a56f7b8be8b5d0e6fc32e04459e5e278d0a9 --- doc/manuals/chapters/subscribers.adoc | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'doc') diff --git a/doc/manuals/chapters/subscribers.adoc b/doc/manuals/chapters/subscribers.adoc index bb57d24..9f87131 100644 --- a/doc/manuals/chapters/subscribers.adoc +++ b/doc/manuals/chapters/subscribers.adoc @@ -67,3 +67,24 @@ transceiving only RAND and SRES, may be applicable. (See 3GPP TS 33.102, chapter |ms_purged_ps|1|3GPP TS 23.008 chapter 2.7.6 |=== +=== Configuring the Subscribers Create on Demand Feature + +Usually a HLR will only allow mobile equipment (ME) on the network, if the HLR +has a subscriber entry with the ME's IMSI. But OsmoHLR can also be configured to +automatically create new entries for new IMSIs, with the +subscriber-create-on-demand VTY option. The obvious use case is creating the +new subscriber entry and then allowing the ME to use both the CS +(Circuit Switched) and PS (Packet Switched) NAM (Network Access Mode). + +On the other hand, operators might only want to give network access to IMSIs, of +which they know the owner. In order to do that, one can set the default NAM to +"none" and manually approve new subscribers by enabling their nam_cs and nam_ps +parameters (e.g. over the VTY). + +Oftentimes it is hard to know, which IMSI belongs to which ME, but the IMEI is +readily available. If you configure your MSC to send IMEI checking requests to +the HLR, before sending location update requests, the subscribers created on +demand can also have the IMEI stored in the HLR database. With OsmoMSC, this +is done by writing "check-imei-rqd early" in the "msc" section of osmo-msc.cfg. +Then enable storing the IMEI when receiving check IMEI requests with +"store-imei" in the OsmoHLR configuration. -- cgit v1.2.3