1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
|
[[abis]]
== Abis/IP Interface
=== A-bis Operation & Maintenance Link
The GSM Operation & Maintenance Link (OML) is specified in 3GPP TS
12.21 and is used between a GSM Base-Transceiver-Station (BTS) and a GSM
Base-Station-Controller (BSC). The default TCP port for OML is __3002__.
The connection will be opened from the BTS to the BSC.
Abis OML is only specified over E1 interfaces. The Abis/IP
implementation of OsmoBTS and OsmoBSC extend and/or deviate from the TS
12.21 specification in several ways. Please see the _OsmoBTS Abis
Protocol Specification_ <<osmobts-abis-spec>> for more information.
=== A-bis Radio Signalling Link
The GSM Radio Signalling Link (RSL) is specified in 3GPP TS 08.58 and is
used between a GSM Base-Transceiver-Station and a GSM
Base-Station-Controller (BSC). The default TCP port for RSL is __3003__.
The connection will be opened from the BTS to BSC after it has been
instructed by the BSC.
Abis RSL is only specified over E1 interfaces. The Abis/IP
implementation of OsmoBTS and OsmoBSC extend and/or deviate from the TS
08.58 specification in several ways. Please see the _OsmoBTS Abis
Protocol Specification_ <<osmobts-abis-spec>> for more information.
=== Locate Abis/IP based BTS
We can use a tool called abisip-find to be able to find BTS which is
connected in the network. This tool is located in the OsmoBSC project
repository under:
'./src/ipaccess'
==== abisip-find
abisip-find is a small command line tool which is used to search and
find BTS devices in your network (e.g. sysmoBTS, nanoBTS).
It uses broadcast packets of the UDP variant of the Abis-IP protocol
on port 3006, and thus will find any BTS that can be reached by the
all-network broadcast address 255.255.255.255
When program is started it will print one line for each BTS it can find.
.Example: using abisip-find to find BTS in your network
----
$ ./abisip-find
abisip-find (C) 2009 by Harald Welte
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
you might need to specify the outgoing
network interface, e.g. ``abisip-find eth0``
Trying to find ip.access BTS by broadcast UDP...
MAC_Address='24:62:78:01:02:03' IP_Address='192.168.0.171' Serial_Number='123'
Unit_ID='sysmoBTS 1002'
MAC_Address='24:62:78:04:05:06' IP_Address='192.168.0.182' Serial_Number='456'
Unit_ID='sysmoBTS 1002'
MAC Address='00:01:02:03:04:05' IP Address='192.168.100.123' Unit ID='65535/0/0'
Location_1='' Location 2='BTS_NBT131G' Equipment Version='165a029_55'
Software Version='168a302_v142b13d0' Unit Name='nbts-00-02-95-00-4E-B3'
Serial Number='00123456'
^C
----
You may have to start the program as a root:
----
$ sudo ./abisip-find eth0
----
=== Deploying a new nanoBTS
A tool called ipaccess-config can be used to configure a new ip.access nanoBTS.
==== ipaccess-config
This program is very helpful tool which is used to configure Unit ID and
Primarly OML IP. You can find this tool in the OsmoBSC repository under:
'./src/ipaccess'
.Example: using ipaccess-config to configure Unit ID and Primarly OML IP of
nanoBTS
----
$ ./ipaccess-config -u 1801/0/0<1> 10.9.1.195<2> -o 10.9.1.154<3>
ipaccess-config (C) 2009-2010 by Harald Welte and others
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
Trying to connect to ip.access BTS ...
abis_nm.c:316 OC=SITE-MANAGER(00) INST=(ff,ff,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07)
abis_nm.c:316 OC=BTS(01) INST=(00,ff,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
abis_nm.c:316 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
OML link established using TRX 0
setting Unit ID to '1801/0/0'
setting primary OML link IP to '10.9.1.154'
abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,00) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
...
abis_nm.c:2433 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) IPACCESS(0xf0):
SET NVATTR ACK
Set the NV Attributes.
----
<1> Unit ID
<2> IP address of the NITB
<3> IP address of the nanoBTS
|
