diff options
Diffstat (limited to 'OsmoSGSN/vty/sgsn_vty_additions.xml')
| -rw-r--r-- | OsmoSGSN/vty/sgsn_vty_additions.xml | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/OsmoSGSN/vty/sgsn_vty_additions.xml b/OsmoSGSN/vty/sgsn_vty_additions.xml new file mode 100644 index 0000000..c9de19a --- /dev/null +++ b/OsmoSGSN/vty/sgsn_vty_additions.xml @@ -0,0 +1,113 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> + <node id='21'> + <child_of nodeid='4' /> + <name>SGSN Configuration Node</name> + <description>Configure the remote GGSN, access-control and other + attributes of the SGSN</description> + <command id='gtp local-ip A.B.C.D'> + <description> + Configure the local IP address to which the SGSN should + bind for the Gp interface (towards the GGSNs). + + Please note that in case you would like to run the GGSN + on the same machine as the SGSN, you can not run both on + the same IP address. It is suggested to use 127.0.0.1 + for the SGSN and 127.0.0.2 for the GGSN in such + situations. + </description> + </command> + <command id='ggsn <0-255> remote-ip A.B.C.D'> + <description> + Configure a static GGSN with a given numeric identifier + to use the specified remote IP address. + </description> + </command> + <command id='ggsn <0-255> gtp-version (0|1)'> + <description> + Configure whether to use GTPv0 or GTPv1 towards the + specified GSSN number. + </description> + </command> + <command id='ggsn dynamic'> + <description> + Enable dynamic resolving of GGSNs based on DNS resolving + the APN name like in a GRX-style setup. Changing this + setting requires a re-start of the SGSN. + </description> + </command> + <command id='grx-dns-add A.B.C.D'> + <description> + Use the specified IP address for DNS-resolving the AP + names to GGSN IP addresses + </description> + </command> + <command id='apn APNAME ggsn <0-255>'> + <description> + Map the given APN Name to the given GGSN number. + </description> + </command> + <command id='apn APNAME imsi-prefx IMSIPRE ggsn <0-255>'> + <description> + Map the given APN Name to the given GGSN number _only_ + if the IMSI matches the given prefix. + </description> + </command> + <command id='imsi-acl (add|del) IMSI'> + <description> + Add or delete the given IMSI to/from the global Access + Control List. + </description> + </command> + <command id='auth-policy (accept-all|closed|acl-only|remote)'> + <description> + Configure the Authorization policy of the SGSN. This + setting determines which subscribers are permitted to + register to the network. + </description> + </command> + <command id='gsup remote-ip A.B.C.D'> + <description> + Set the IP address of the HLR (gateway) for the GSUP protocol. + This setting only applies if auth-policy remote is used. + </description> + </command> + <command id='gsup oap-id <0-65535>'> + <description> + Set the OAP client ID for authentication on the GSUP + protocol. + This setting only applies if auth-policy remote is used. + </description> + </command> + <command id='gsup oap-k K'> + <description> + Set the OAP shared secret key K for authentication on + the GSUP protocol. + This setting only applies if auth-policy remote is used. + </description> + </command> + <command id='gsup oap-opc OPC'> + <description> + Set the OAP shared secret OPC for authentication on the + GSUP protocol. + This setting only applies if auth-policy remote is used. + </description> + </command> + <command id='access-point-name NAME'> + <description> + Globally allow the given APN name for all subscribers. + </description> + </command> + <command id='cdr filename NAME'> + <description> + Set the file name for the call-data-record file, + logging the data usage of each subscriber. + </description> + </command> + <command id='cdr interval <1-2147483647>'> + <description> + Set the interval (in secodnds) for the call-data-record + file. + </description> + </command> + </node> +</vtydoc> |