summaryrefslogtreecommitdiffstats
path: root/OsmoPCU
diff options
context:
space:
mode:
Diffstat (limited to 'OsmoPCU')
-rw-r--r--OsmoPCU/Makefile.am19
-rw-r--r--OsmoPCU/chapters/configuration.adoc205
-rw-r--r--OsmoPCU/chapters/counters.adoc4
-rw-r--r--OsmoPCU/chapters/counters_generated.adoc178
-rw-r--r--OsmoPCU/chapters/overview.adoc67
-rw-r--r--OsmoPCU/chapters/running.adoc33
-rw-r--r--OsmoPCU/gb/bssgp.adoc501
-rw-r--r--OsmoPCU/gb/gb-startup.msc27
-rw-r--r--OsmoPCU/gb/ns.adoc227
-rw-r--r--OsmoPCU/osmopcu-gb-docinfo.xml58
-rw-r--r--OsmoPCU/osmopcu-gb.adoc95
-rw-r--r--OsmoPCU/osmopcu-usermanual-docinfo.xml46
-rw-r--r--OsmoPCU/osmopcu-usermanual.adoc30
-rw-r--r--OsmoPCU/osmopcu-vty-reference.xml37
-rw-r--r--OsmoPCU/vty/osmo-pcu_vty_additions.xml9
-rw-r--r--OsmoPCU/vty/osmo-pcu_vty_reference.xml941
16 files changed, 0 insertions, 2477 deletions
diff --git a/OsmoPCU/Makefile.am b/OsmoPCU/Makefile.am
deleted file mode 100644
index a741f9b..0000000
--- a/OsmoPCU/Makefile.am
+++ /dev/null
@@ -1,19 +0,0 @@
-OSMO_GSM_MANUALS_DIR = $(top_srcdir)
-EXTRA_DIST = osmopcu-gb.adoc \
- osmopcu-gb-docinfo.xml \
- osmopcu-usermanual.adoc \
- osmopcu-usermanual-docinfo.xml \
- osmopcu-vty-reference.xml \
- chapters \
- gb \
- vty
-
-ASCIIDOC = osmopcu-usermanual.adoc osmopcu-gb.adoc
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.asciidoc.inc
-osmopcu-gb.pdf: $(srcdir)/gb/*.adoc $(srcdir)/gb/*.msc
-osmopcu-usermanual.pdf: $(srcdir)/chapters/*.adoc
-
-VTY_REFERENCE = osmopcu-vty-reference.xml
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc
-
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.common.inc
diff --git a/OsmoPCU/chapters/configuration.adoc b/OsmoPCU/chapters/configuration.adoc
deleted file mode 100644
index 6fc61c7..0000000
--- a/OsmoPCU/chapters/configuration.adoc
+++ /dev/null
@@ -1,205 +0,0 @@
-== Configuring OsmoPCU
-
-Contrary to other network elements (like OsmoBSC, OsmoNITB), the
-OsmoPCU has a relatively simple minimum configuration.
-
-This is primarily because most of the PCU configuration happens
-indirectly from the BSC, who passes the configuation over A-bis OML via
-OsmoBTS and its PCU socket into OsmoPCU.
-
-A minimal OsmoPCU configuration file is provided below for your reference:
-
-.Example: Minimal OsmoPCU configuration file (`osmo-pcu.cfg`)
-----
-pcu
- flow-control-interval 10 <1>
- cs 2 <2>
- alloc-algorithm dynamic <3>
- alpha 0 <4>
- gamma 0
-----
-<1> send a BSSGP flow-control PDU every 10 seconds
-<2> start a TBF with the initial coding scheme 2
-<3> dynamically chose between single-slot or multi-slot TBF allocations
- depending on system load
-<4> disable MS power control loop
-
-However, there are plenty of tuning parameters for people interested to
-optimize PCU throughput or latency according to their requirements.
-
-=== Configuring the Coding Schemes and Rate Adaption
-
-The BSC includes a bit-mask of permitted [E]GPRS coding schemes as part
-of the A-bis OML configuration. This is passed from the BTS via the PCU
-socket into OsmoPCU.
-
-Some additional parameters can be set as described below.
-
-==== Initial Coding Scheme
-
-You can use the `cs <1-4> [<1-4>]` command at the `pcu` VTY config node
-to set the initial GPRS coding scheme to be used. The optional second
-value allows to specify a different initial coding scheme for uplink.
-
-==== Maximum Coding Scheme
-
-You can use the `cs max <1-4> [<1-4>]` command at the `pcu` VTY config
-node to set the maximum coding scheme that should be used as part of the
-rate adaption.
-
-==== Rate Adaption Error Thresholds
-
-You can use the `cs threshold <0-100> <0-100>` command at the `pcu` VTY
-config node to determine the upper and lower limit for the error rate
-percentage to use in the rate adaption. If the upper threshold is
-reached, a lower coding sheme is chosen, and if the lower threshold is
-reached, a higher coding scheme is chosen.
-
-==== Rate Adation Link Quality Thresholds
-
-You can use the `cs link-quality-ranges cs1 <0-35> cs2 <0-35> <0-35> cs3
-<0-35> <0-35> cs4 <0-35>` command at the `pcu` VTY config node to tune
-the link quality ranges for the respective coding schemes.
-
-==== Data Size based CS downgrade Threshold
-
-You can use the `cs downgrade-threshold <1-10000>` command at the `pcu`
-VTY config node to ask the PCU to down-grade the coding scheme if less
-than the specified number of octets are left to be transmitted.
-
-=== Miscellaneous Configuration / Tuning Parameters
-
-==== Downlink TBF idle time
-
-After a down-link TBF is idle (all data in the current LLC downlink
-queue for the MS has been transmitted), we can keep the TBF established
-for a configurable time. This avoids having to go through a new one or
-two phase TBF establishment once the next data for downlink arrives.
-
-You can use the `dl-tbf-idle-time <1-5000>` to specify that time in
-units of milli-seconds. The default is 2 seconds.
-
-==== MS idle time
-
-Using the `ms-idle-time <1-7200>` command at the `pcu` VTY config node
-you can configure the number of seconds for which the PCU should keep
-the MS data structure alive before releasing it if there are no active
-TBF for this MS.
-
-The OsmoPCU default value is 60 seconds, which is slightly more than
-what 3GPP TS 24.008 recommends for T3314 (44s).
-
-The MS data structure only consumes memory in the PCU and does not
-require any resources of the air interface.
-
-==== Forcing two-phase access
-
-If the MS is using a single-phase access, you can still force it to
-use a two-phase access using the `two-phase-access` VTY configuration
-command at the `pcu` VTY config node.
-
-=== Configuring BSSGP flow control
-
-BSSGP between SGSN and PCU contains a two-level nested flow control
-mechanism:
-
-. one global flow control instance for the overall (downlink) traffic
- from the SGSN to this PCU
-. a per-MS flow control instance for each individual MS served by this
- PCU
-
-Each of the flow control instance is implemented as a TBF (token bucket
-filter).
-
-==== Normal BSSGP Flow Control Tuning parameters
-
-You can use the following commands at the `pcu` VTY config node to tune
-the BSSGP flow control parameters:
-
-`flow-control-interval <1-10>`::
- configure the interval (in seconds) between subsequent flow
- control PDUs from PCU to SGSN
-`flow-control bucket-time <1-65534>`::
- set the target downlink maximum queueing time in centi-seconds.
- The PCU will attempt to adjust the advertised bucket size to match this
- target.
-
-==== Extended BSSGP Flow Control Tuning parameters
-
-There are some extended flow control related parameters at the `pcu` VTY
-config node that override the automatic flow control as specified in the
-BSSGP specification. Use them with care!
-
-`flow-control force-bvc-bucket-size <1-6553500>`::
- force the BVC (global) bucket size to the given number of octets
-`flow-control force-bvc-leak-rate <1-6553500>`::
- force the BVC (global) bucket leak rate to the given number of bits/s
-`flow-control force-ms-bucket-size <1-6553500>`::
- force the per-MS bucket size to the given number of octets
-`flow-control force-ms-leak-rate <1-6553500>`::
- force the per-MS bucket leak rate to the given number of bits/s
-
-
-=== Configuring LLC queue
-
-The downlink LLC queue in the PCU towards the MS can be tuned with a
-variety of parameters at the `pcu` VTY config node, depending on your
-needs.
-
-`queue lifetime <1-65534>`::
- Each downlink LLC PDU is assigned a lifetime by the SGSN, which
- is respected by the PDU *unless* you use this command to
- override the PDU lifetime with a larger value (in centi-seconds)
-`queue lifetime infinite`::
- Never drop LLC PDUs, i.e. give them an unlimited lifetime.
-`queue hysteresis <1-65535>`::
- When the downlink LLC queue is full, the PCU starts dropping
- packets. Using this parameter, we can set the lifetime
- hysteresis in centi-seconds, i.e. it will continue discarding
- until "lifetime - hysteresis" is reached.
-`queue codel`::
- Use the 'CoDel' (Controlled Delay) scheduling algorithm, which
- is designed to overcome buffer bloat. It will use a default
- interval of 4 seconds.
-`queue codel interval <1-1000>`::
- Use the 'CoDel' (Controlled Delay) scheduling algorithm, which
- is designed to overcome buffer bloat. Use the specified
- interval in centi-seconds.
-`queue idle-ack-delay <1-65535>`::
- Delay the request for an ACK after the last downlink LLC frame
- by the specified amount of centi-seconds.
-
-
-=== Configuring MS power control
-
-GPRS MS power control works completely different than the close MS power
-control loop in circuit-switched GSM.
-
-Rather than instructing the MS constantly about which transmit power to
-use, some parameters are provided to the MS by which the MS-based power
-control algorithm is tuned.
-
-See 3GPP TS 05.08 for further information on the algorithm and the
-parameters.
-
-You can set those parameters at the `pcu` VTY config node as follows:
-
-`alpha <0-10>`::
- Alpha parameter for MS power control in units of 0.1.
- Make sure to set the alpha value at System Information 13 (in
- the BSC), too!
-`gamma <0-62>`::
- Set the gamma parameter for MS power control in units of dB.
-
-
-=== Enabling EGPRS
-
-If you would like to test the currently (experimental) EGPRS support of
-OsmoPCU, you can enable it using the `egprs` command at the `pcu` VTY
-config node.
-
-WARNING: EPGRS functionality is highly experimental at the time of this
-writing. Please only use if you actively would like to participate in
-the OsmoPCU EGPRS development and/or testing. You will also need an
-EGPRS capable OsmoBTS+PHY, which means `osmo-bts-sysmo` or
-`osmo-bts-litecell15` with their associated PHY.
diff --git a/OsmoPCU/chapters/counters.adoc b/OsmoPCU/chapters/counters.adoc
deleted file mode 100644
index 7fbb10c..0000000
--- a/OsmoPCU/chapters/counters.adoc
+++ /dev/null
@@ -1,4 +0,0 @@
-[[counters]]
-== Counters
-
-include::./counters_generated.adoc[]
diff --git a/OsmoPCU/chapters/counters_generated.adoc b/OsmoPCU/chapters/counters_generated.adoc
deleted file mode 100644
index 2ee425e..0000000
--- a/OsmoPCU/chapters/counters_generated.adoc
+++ /dev/null
@@ -1,178 +0,0 @@
-// autogenerated by show asciidoc counters
-These counters and their description based on Osmo-PCU 0.4.0.4-8d55 (Osmo-PCU).
-
-// generating tables for rate_ctr_group
-// rate_ctr_group table BSSGP Peer Statistics
-.bssgp:bss_ctx - BSSGP Peer Statistics
-[options="header"]
-|===
-| Name | Reference | Description
-| packets:in | <<bssgp:bss_ctx_packets:in>> | Packets at BSSGP Level ( In)
-| packets:out | <<bssgp:bss_ctx_packets:out>> | Packets at BSSGP Level (Out)
-| bytes:in | <<bssgp:bss_ctx_bytes:in>> | Bytes at BSSGP Level ( In)
-| bytes:out | <<bssgp:bss_ctx_bytes:out>> | Bytes at BSSGP Level (Out)
-| blocked | <<bssgp:bss_ctx_blocked>> | BVC Blocking count
-| discarded | <<bssgp:bss_ctx_discarded>> | BVC LLC Discarded count
-| status | <<bssgp:bss_ctx_status>> | BVC Status count
-|===
-// rate_ctr_group table NSVC Peer Statistics
-.ns:nsvc - NSVC Peer Statistics
-[options="header"]
-|===
-| Name | Reference | Description
-| packets:in | <<ns:nsvc_packets:in>> | Packets at NS Level ( In)
-| packets:out | <<ns:nsvc_packets:out>> | Packets at NS Level (Out)
-| bytes:in | <<ns:nsvc_bytes:in>> | Bytes at NS Level ( In)
-| bytes:out | <<ns:nsvc_bytes:out>> | Bytes at NS Level (Out)
-| blocked | <<ns:nsvc_blocked>> | NS-VC Block count
-| dead | <<ns:nsvc_dead>> | NS-VC gone dead count
-| replaced | <<ns:nsvc_replaced>> | NS-VC replaced other count
-| nsei-chg | <<ns:nsvc_nsei-chg>> | NS-VC changed NSEI count
-| inv-nsvci | <<ns:nsvc_inv-nsvci>> | NS-VCI was invalid count
-| inv-nsei | <<ns:nsvc_inv-nsei>> | NSEI was invalid count
-| lost:alive | <<ns:nsvc_lost:alive>> | ALIVE ACK missing count
-| lost:reset | <<ns:nsvc_lost:reset>> | RESET ACK missing count
-|===
-// rate_ctr_group table NSVC Peer Statistics
-.ns:nsvc - NSVC Peer Statistics
-[options="header"]
-|===
-| Name | Reference | Description
-| packets:in | <<ns:nsvc_packets:in>> | Packets at NS Level ( In)
-| packets:out | <<ns:nsvc_packets:out>> | Packets at NS Level (Out)
-| bytes:in | <<ns:nsvc_bytes:in>> | Bytes at NS Level ( In)
-| bytes:out | <<ns:nsvc_bytes:out>> | Bytes at NS Level (Out)
-| blocked | <<ns:nsvc_blocked>> | NS-VC Block count
-| dead | <<ns:nsvc_dead>> | NS-VC gone dead count
-| replaced | <<ns:nsvc_replaced>> | NS-VC replaced other count
-| nsei-chg | <<ns:nsvc_nsei-chg>> | NS-VC changed NSEI count
-| inv-nsvci | <<ns:nsvc_inv-nsvci>> | NS-VCI was invalid count
-| inv-nsei | <<ns:nsvc_inv-nsei>> | NSEI was invalid count
-| lost:alive | <<ns:nsvc_lost:alive>> | ALIVE ACK missing count
-| lost:reset | <<ns:nsvc_lost:reset>> | RESET ACK missing count
-|===
-// rate_ctr_group table BTS Statistics
-.bts - BTS Statistics
-[options="header"]
-|===
-| Name | Reference | Description
-| tbf:dl:alloc | <<bts_tbf:dl:alloc>> | TBF DL Allocated
-| tbf:dl:freed | <<bts_tbf:dl:freed>> | TBF DL Freed
-| tbf:dl:aborted | <<bts_tbf:dl:aborted>> | TBF DL Aborted
-| tbf:ul:alloc | <<bts_tbf:ul:alloc>> | TBF UL Allocated
-| tbf:ul:freed | <<bts_tbf:ul:freed>> | TBF UL Freed
-| tbf:ul:aborted | <<bts_tbf:ul:aborted>> | TBF UL Aborted
-| tbf:reused | <<bts_tbf:reused>> | TBF Reused
-| tbf:alloc:algo-a | <<bts_tbf:alloc:algo-a>> | TBF Alloc Algo A
-| tbf:alloc:algo-b | <<bts_tbf:alloc:algo-b>> | TBF Alloc Algo B
-| tbf:failed:egprs-only | <<bts_tbf:failed:egprs-only>> | TBF Failed EGPRS-only
-| rlc:sent | <<bts_rlc:sent>> | RLC Sent
-| rlc:resent | <<bts_rlc:resent>> | RLC Resent
-| rlc:restarted | <<bts_rlc:restarted>> | RLC Restarted
-| rlc:stalled | <<bts_rlc:stalled>> | RLC Stalled
-| rlc:nacked | <<bts_rlc:nacked>> | RLC Nacked
-| rlc:final_block_resent | <<bts_rlc:final_block_resent>> | RLC Final Blk resent
-| rlc:ass:timedout | <<bts_rlc:ass:timedout>> | RLC Assign Timeout
-| rlc:ass:failed | <<bts_rlc:ass:failed>> | RLC Assign Failed
-| rlc:ack:timedout | <<bts_rlc:ack:timedout>> | RLC Ack Timeout
-| rlc:ack:failed | <<bts_rlc:ack:failed>> | RLC Ack Failed
-| rlc:rel:timedout | <<bts_rlc:rel:timedout>> | RLC Release Timeout
-| rlc:late-block | <<bts_rlc:late-block>> | RLC Late Block
-| rlc:sent-dummy | <<bts_rlc:sent-dummy>> | RLC Sent Dummy
-| rlc:sent-control | <<bts_rlc:sent-control>> | RLC Sent Control
-| rlc:dl_bytes | <<bts_rlc:dl_bytes>> | RLC DL Bytes
-| rlc:dl_payload_bytes | <<bts_rlc:dl_payload_bytes>> | RLC DL Payload Bytes
-| rlc:ul_bytes | <<bts_rlc:ul_bytes>> | RLC UL Bytes
-| rlc:ul_payload_bytes | <<bts_rlc:ul_payload_bytes>> | RLC UL Payload Bytes
-| decode:errors | <<bts_decode:errors>> | Decode Errors
-| sba:allocated | <<bts_sba:allocated>> | SBA Allocated
-| sba:freed | <<bts_sba:freed>> | SBA Freed
-| sba:timedout | <<bts_sba:timedout>> | SBA Timeout
-| llc:timeout | <<bts_llc:timeout>> | Timedout Frames
-| llc:dropped | <<bts_llc:dropped>> | Dropped Frames
-| llc:scheduled | <<bts_llc:scheduled>> | Scheduled Frames
-| llc:dl_bytes | <<bts_llc:dl_bytes>> | RLC encapsulated PDUs
-| llc:ul_bytes | <<bts_llc:ul_bytes>> | full PDUs received
-| rach:requests | <<bts_rach:requests>> | RACH requests
-| 11bit_rach:requests | <<bts_11bit_rach:requests>> | 11BIT_RACH requests
-| spb:uplink_first_segment | <<bts_spb:uplink_first_segment>> | First seg of UL SPB
-| spb:uplink_second_segment | <<bts_spb:uplink_second_segment>> | Second seg of UL SPB
-| spb:downlink_first_segment | <<bts_spb:downlink_first_segment>> | First seg of DL SPB
-| spb:downlink_second_segment | <<bts_spb:downlink_second_segment>> | Second seg of DL SPB
-| immediate:assignment_UL | <<bts_immediate:assignment_UL>> | Immediate Assign UL
-| immediate:assignment_rej | <<bts_immediate:assignment_rej>> | Immediate Assign Rej
-| immediate:assignment_DL | <<bts_immediate:assignment_DL>> | Immediate Assign DL
-| channel:request_description | <<bts_channel:request_description>> | Channel Request Desc
-| pkt:ul_assignment | <<bts_pkt:ul_assignment>> | Packet UL Assignment
-| pkt:access_reject | <<bts_pkt:access_reject>> | Packet Access Reject
-| pkt:dl_assignment | <<bts_pkt:dl_assignment>> | Packet DL Assignment
-| ul:control | <<bts_ul:control>> | UL control Block
-| ul:assignment_poll_timeout | <<bts_ul:assignment_poll_timeout>> | UL Assign Timeout
-| ul:assignment_failed | <<bts_ul:assignment_failed>> | UL Assign Failed
-| dl:assignment_timeout | <<bts_dl:assignment_timeout>> | DL Assign Timeout
-| dl:assignment_failed | <<bts_dl:assignment_failed>> | DL Assign Failed
-| pkt:ul_ack_nack_timeout | <<bts_pkt:ul_ack_nack_timeout>> | PUAN Poll Timeout
-| pkt:ul_ack_nack_failed | <<bts_pkt:ul_ack_nack_failed>> | PUAN poll Failed
-| pkt:dl_ack_nack_timeout | <<bts_pkt:dl_ack_nack_timeout>> | PDAN poll Timeout
-| pkt:dl_ack_nack_failed | <<bts_pkt:dl_ack_nack_failed>> | PDAN poll Failed
-| gprs:downlink_cs1 | <<bts_gprs:downlink_cs1>> | CS1 downlink
-| gprs:downlink_cs2 | <<bts_gprs:downlink_cs2>> | CS2 downlink
-| gprs:downlink_cs3 | <<bts_gprs:downlink_cs3>> | CS3 downlink
-| gprs:downlink_cs4 | <<bts_gprs:downlink_cs4>> | CS4 downlink
-| egprs:downlink_mcs1 | <<bts_egprs:downlink_mcs1>> | MCS1 downlink
-| egprs:downlink_mcs2 | <<bts_egprs:downlink_mcs2>> | MCS2 downlink
-| egprs:downlink_mcs3 | <<bts_egprs:downlink_mcs3>> | MCS3 downlink
-| egprs:downlink_mcs4 | <<bts_egprs:downlink_mcs4>> | MCS4 downlink
-| egprs:downlink_mcs5 | <<bts_egprs:downlink_mcs5>> | MCS5 downlink
-| egprs:downlink_mcs6 | <<bts_egprs:downlink_mcs6>> | MCS6 downlink
-| egprs:downlink_mcs7 | <<bts_egprs:downlink_mcs7>> | MCS7 downlink
-| egprs:downlink_mcs8 | <<bts_egprs:downlink_mcs8>> | MCS8 downlink
-| egprs:downlink_mcs9 | <<bts_egprs:downlink_mcs9>> | MCS9 downlink
-| gprs:uplink_cs1 | <<bts_gprs:uplink_cs1>> | CS1 Uplink
-| gprs:uplink_cs2 | <<bts_gprs:uplink_cs2>> | CS2 Uplink
-| gprs:uplink_cs3 | <<bts_gprs:uplink_cs3>> | CS3 Uplink
-| gprs:uplink_cs4 | <<bts_gprs:uplink_cs4>> | CS4 Uplink
-| egprs:uplink_mcs1 | <<bts_egprs:uplink_mcs1>> | MCS1 Uplink
-| egprs:uplink_mcs2 | <<bts_egprs:uplink_mcs2>> | MCS2 Uplink
-| egprs:uplink_mcs3 | <<bts_egprs:uplink_mcs3>> | MCS3 Uplink
-| egprs:uplink_mcs4 | <<bts_egprs:uplink_mcs4>> | MCS4 Uplink
-| egprs:uplink_mcs5 | <<bts_egprs:uplink_mcs5>> | MCS5 Uplink
-| egprs:uplink_mcs6 | <<bts_egprs:uplink_mcs6>> | MCS6 Uplink
-| egprs:uplink_mcs7 | <<bts_egprs:uplink_mcs7>> | MCS7 Uplink
-| egprs:uplink_mcs8 | <<bts_egprs:uplink_mcs8>> | MCS8 Uplink
-| egprs:uplink_mcs9 | <<bts_egprs:uplink_mcs9>> | MCS9 Uplink
-|===
-// generating tables for osmo_stat_items
-NSVC Peer Statistics
-// osmo_stat_item_group table NSVC Peer Statistics
-.ns.nsvc - NSVC Peer Statistics
-[options="header"]
-|===
-| Name | Reference | Description | Unit
-| alive.delay | <<ns.nsvc_alive.delay>> | ALIVE response time | ms
-|===
-NSVC Peer Statistics
-// osmo_stat_item_group table NSVC Peer Statistics
-.ns.nsvc - NSVC Peer Statistics
-[options="header"]
-|===
-| Name | Reference | Description | Unit
-| alive.delay | <<ns.nsvc_alive.delay>> | ALIVE response time | ms
-|===
-BTS Statistics
-// osmo_stat_item_group table BTS Statistics
-.bts - BTS Statistics
-[options="header"]
-|===
-| Name | Reference | Description | Unit
-| ms.present | <<bts_ms.present>> | MS Present |
-|===
-// generating tables for osmo_counters
-// ungrouped osmo_counters
-.ungrouped osmo counters
-[options="header"]
-|===
-| Name | Reference | Description
-|===
-
-
diff --git a/OsmoPCU/chapters/overview.adoc b/OsmoPCU/chapters/overview.adoc
deleted file mode 100644
index 0031474..0000000
--- a/OsmoPCU/chapters/overview.adoc
+++ /dev/null
@@ -1,67 +0,0 @@
-== Overview
-
-=== About OsmoPCU
-
-OsmoPCU is the Osmocom implementation of the GPRS PCU (Packet Control
-Unit) element inside the GPRS network.
-
-The OsmoPCU is co-located within the BTS and connects to OsmoBTS via its
-PCU socket interface.
-
-On the other side, OsmoPCU is connected via the Gb interface to the
-SGSN.
-
-[[fig-gprs-pcubts]]
-.GPRS network architecture with PCU in BTS
-[graphviz]
-----
-digraph G {
- rankdir=LR;
- MS0 [label="MS"]
- MS1 [label="MS"]
- MS0->BTS [label="Um"]
- MS1->BTS [label="Um"]
- BTS->BSC [label="Abis"]
- BSC->MSC [label="A"]
- BTS->PCU [label="pcu_sock"]
- PCU->SGSN [label="Gb"]
- SGSN->GGSN [label="GTP"]
-}
-----
-
-=== Software Components
-
-OsmoPCU consists of a variety of components, including
-
-* Gb interface (NS/BSSGP protocol)
-* `pcu_sock` interface towards OsmoBTS
-* TBF management for uplink and downlink TBF
-* RLC/MAC protocol implementation
-* per-MS context for each MS currently served
-* CSN.1 encoding/decoding routines
-
-==== Gb Implementation
-
-OsmoPCU implements the ETSI/3GPP specified Gb interface, including TS
-08.16 (NS), TS 08.18 (BSSGP) protocols. As transport layer for NS, it
-supports NS/IP (NS encapsulated in UDP/IP).
-
-The actual Gb Implementation is part of the libosmogb library, which is
-in turn part of the libosmocore software package. This allows the same
-Gb implementation to be used from OsmoPCU, OsmoGbProxy as well as
-OsmoSGSN.
-
-==== `pcu_sock` Interface to OsmoBTS
-
-The interface towards OsmoBTS is called 'pcu_sock' and implemented as a
-set of non-standardized primitives over a unix domain socket. The
-default file system path for this socket is `/tmp/pcu_bts`.
-
-The PCU socket can be changed on both OmsoBTS and OsmoPCU to a different
-file/path name, primarily to permit running multiple independent BTS+PCU
-pairs on a single Linux machine without having to use filesystem
-namespaces or other complex configurations.
-
-NOTE: If you change the PCU socket path on OsmoBTS by means of the
-`pcu-socket` VTY configuration command, you must ensure to make the
-identical change on the OsmoPCU side.
diff --git a/OsmoPCU/chapters/running.adoc b/OsmoPCU/chapters/running.adoc
deleted file mode 100644
index d9f78c8..0000000
--- a/OsmoPCU/chapters/running.adoc
+++ /dev/null
@@ -1,33 +0,0 @@
-== Running OsmoPCU
-
-The OsmoPCU executable (`osmo-pcu`) offers the following command-line
-options:
-
-
-=== SYNOPSIS
-
-*osmo-pcu* [-h|-V] [-D] [-c 'CONFIGFILE'] [-r 'PRIO'] [-m 'MCC'] [-n 'MNC']
-
-
-=== OPTIONS
-
-*-h, --help*::
- Print a short help message about the supported options
-*-V, --version*::
- Print the compile-time version number of the OsmoBTS program
-//*-D, --daemonize*::
-// Fork the process as a daemon into background.
-*-c, --config-file 'CONFIGFILE'*::
- Specify the file and path name of the configuration file to be
- used. If none is specified, use `osmo-pcu.cfg` in the current
- working directory.
-*-r, --realtime 'PRIO'*::
- Enable use of the Linux kernel realtime priority scheduler with
- the specified priority.
- It is recommended you use this option on low-performance
- embedded systems or systems that encounter high non-GSM/GPRS
- load.
-*-m, --mcc 'MCC'*::
- Use the given MCC instead of that provided by BTS via PCU socket
-*-n, --mnc 'MNC'*::
- Use the given MNC instead of that provided by BTS via PCU socket
diff --git a/OsmoPCU/gb/bssgp.adoc b/OsmoPCU/gb/bssgp.adoc
deleted file mode 100644
index 18f1842..0000000
--- a/OsmoPCU/gb/bssgp.adoc
+++ /dev/null
@@ -1,501 +0,0 @@
-[[bssgp]]
-== BSS GPRS Protocol (BSSGP)
-
-=== List of Messages
-
-The following tables list the BSSGP messages used by OsmoPCU, grouped
-by their level of compliance with 3GPP TS 08.18.
-
-==== Messages Compliant With TS 08.18
-
-.Messages compliant with TS 08.18
-[options="header",cols="10%,10%,20%,35%,5%,20%"]
-|===
-| TS 08.18 § | type code (hex) | This document § | Message | <-/-> | Received/Sent by OsmoPCU
-6+<| *RL and BSSGP SAP Messages:*
-| 10.2.1 | 0x00 | <<dl_unit_data>> | DL-UNITDATA | <- | Received
-| 10.2.2 | 0x01 | <<ul_unit_data>> | UL-UNITDATA | -> | Sent
-| 10.2.3 | 0x02 | <<ra_capab>> | RA-CAPABILITY | <- | Received
-6+<| *GMM SAP Messages:*
-| 10.3.1 | 0x06 | <<paging_ps>> | PAGING PS | <- | Received
-| 10.3.2 | 0x07 | <<paging_cs>> | PAGING CS | <- | Received
-| 10.3.7 | 0x0c | <<susp_ack>> | SUSPEND-ACK | <- | Received
-| 10.3.8 | 0x0d | <<susp_nack>> | SUSPEND-NACK | <- | Received
-| 10.3.10 | 0x0f | <<res_ack>> | RESUME-ACK | <- | Received
-| 10.3.11 | 0x10 | <<res_nack>> | RESUME-NACK | <- | Received
-6+<| *NM SAP Messages:*
-| 10.4.9 | 0x21 | <<block_ack>> | BVC-BLOCK-ACK | <- | Received
-| 10.4.12 | 0x22 | <<bvc_reset>> | BVC-RESET | <-/-> | Received/Sent
-| 10.4.13 | 0x23 | <<reset_ack>> | BVC-RESET-ACK | <- | Received
-| 10.4.10 | 0x24 | <<bvc_unblock>> | BVC-UNBLOCK | -> | Sent
-| 10.4.11 | 0x25 | <<unblock_ack>> | BVC-UNBLOCK-ACK | <- | Received
-| 10.4.4 | 0x26 | <<flow_bvc>> | FLOW-CONTROL-BVC | -> | Sent
-| 10.4.5 | 0x27 | <<flow_bvc_ack>> | FLOW-CONTROL-BVC-ACK | <- | Received
-| 10.4.7 | 0x29 | <<flow_ms_ack>> | FLOW-CONTROL-MS-ACK | <- | Received
-| 10.4.1 | 0x2a | <<flush_ll>> | FLUSH-LL | <- | Received
-| 10.4.15 | 0x40 | <<invoke_trace>> | SGSN-INVOKE-TRACE | <- | Received
-| 10.4.14 | 0x41 | <<bssgp_status>> | STATUS | <-/-> | Received/Sent
-|===
-
-==== Messages Specific to OsmoPCU
-
-There are no OsmoPCU specific BSSGP messages.
-
-[[not_impl]]
-==== Messages Not Implemented by OsmoPCU
-
-.3GPP TS 08.18 messages not implemented by OsmoPCU
-[options="header",cols="10%,10%,80%"]
-|===
-| TS 08.18 § | type code (hex) | Message
-3+<| *RL (relay) and BSSGP SAP Messages:*
-| 10.2.4 | 0x03 | PTM-UNITDATA
-3+<| *GMM (GPRS mobility management) SAP Messages:*
-| 10.3.3 | 0x08 | RA-CAPABILITY-UPDATE
-| 10.3.4 | 0x09 | RA-CAPABILITY-UPDATE-ACK
-| 10.3.5 | 0x0a | RADIO-STATUS
-| 10.3.6 | 0x0b | SUSPEND
-| 10.3.9 | 0x0e | RESUME
-3+<| *NM (network management) SAP Messages:*
-| 10.4.8 | 0x20 | BVC-BLOCK
-| 10.4.6 | 0x28 | FLOW-CONTROL-MS
-| 10.4.2 | 0x2b | FLUSH-LL-ACK
-| 10.4.3 | 0x2c | LLC-DISCARDED
-3+<| *PFM (packet flow management) SAP Messages:*
-| 10.4.16 | 0x50 | DOWNLOAD-BSS-PFC
-| 10.4.17 | 0x51 | CREATE-BSS-PFC
-| 10.4.18 | 0x52 | CREATE-BSS-PFC-ACK
-| 10.4.19 | 0x53 | CREATE-BSS-PFC-NACK
-| 10.4.20 | 0x54 | MODIFY-BSS-PFC
-| 10.4.21 | 0x55 | MODIFY-BSS-PFC-ACK
-| 10.4.22 | 0x56 | DELETE-BSS-PFC
-| 10.4.23 | 0x57 | DELETE-BSS-PFC-ACK
-|===
-
-
-=== Details on Compliant BSSGP Messages
-
-[[dl_unit_data]]
-==== DL-UNITDATA
-
-This message conforms to 3GPP TS 08.18 § 10.2.1, with the following
-limitations:
-
-* OsmoPCU does not support QoS
-* all optional IEs except for IMSI and old TLLI are ignored.
-
-._DL-UNITDATA_ IE limitations
-[options="header",cols="10%,30%,60%"]
-|===
-| TS 08.18 § | IE Name | Handling
-| 11.3.28 | QoS Profile | _ignored_
-| 11.3.22 | MS Radio Access Capability | _ignored_
-| 11.3.27 | Priority | _ignored_
-| 11.3.11 | DRX Parameters | _ignored_
-| 1.3.42 | PFI | _ignored_
-| 11.3.19 | LSA Information | _ignored_
-| 11.3.47 | Service UTRAN CCO | _ignored_
-|===
-
-[[ul_unit_data]]
-==== UL-UNITDATA
-
-This message conforms to 3GPP TS 08.18 § 10.2.2, with the following limitations:
-
-* OsmoPCU does not send optional IEs - PFI (§ 12.3.42) and LSA
- Identifier List (§ 11.3.18).
-* QoS Profile (§ 11.3.28) IE is always set to 0x04.
-
-[[ra_capab]]
-==== RA-CAPABILITY
-
-This message is received and logged but ignored by OsmoPCU at the moment.
-
-[[paging_ps]]
-==== PAGING PS
-
-This message conforms to 3GPP TS 08.18 § 10.3.1, with the following
-limitations:
-
-* only IMSI and P-TMSI are parsed by OsmoPCU.
-
-._DL-UNITDATA_ IE limitations
-[options="header",cols="10%,30%,60%"]
-|===
-| TS 08.18 § | IE Name | Handling
-| 11.3.11 | DRX Parameters | _ignored_
-| 11.3.6 | BVCI | _ignored_
-| 11.3.17 | Location Are | _ignored_
-| 11.3.31 | Routeing Area | _ignored_
-| 11.3.3 | BSS Area Indication | _ignored_
-| 11.3.42 | PFI | _ignored_
-| 11.3.43 | ABQP | _ignored_
-| 11.3.28 | QoS Profile | _ignored_
-| 11.3.36 | P-TMSI | treated as mandatory (in case of absence paging with 0-length P-TMSI will be sent)
-|===
-
-
-[[paging_cs]]
-==== PAGING CS
-
-This message is received and logged but ignored by OsmoPCU at the
-moment.
-
-[[susp_ack]]
-==== SUSPEND-ACK
-
-This message is received and logged but ignored by OsmoPCU at the
-moment.
-
-[[susp_nack]]
-==== SUSPEND-NACK
-
-This message is received and logged but ignored by OsmoPCU at the
-moment.
-
-[[res_ack]]
-==== RESUME-ACK
-
-This message is received and logged but ignored by OsmoPCU at the
-moment.
-
-[[res_nack]]
-==== RESUME-NACK
-
-This message is received and logged but ignored by OsmoPCU at the
-moment.
-
-[[block_ack]]
-==== BVC-BLOCK-ACK
-
-This message is received and logged but ignored by OsmoPCU at the
-moment.
-
-[[bvc_reset]]
-==== BVC-RESET
-
-OsmoPCU never transmits optional Feature bitmap (3GPP TS 08.18 §
-11.3.40) IE.
-
-Receiving BVC RESET will cause OsmoPCU to respond with "Unknown BVCI"
-status message.
-
-[[reset_ack]]
-==== BVC-RESET-ACK
-
-This message conforms to 3GPP TS 08.18 § 10.4.13.
-
-After receiving it OsmoPCU completes the RESET procedure for BVC
-according to 3GPP TS 08.18 § 8.4.
-
-[[unblock_ack]]
-==== BVC-UNBLOCK-ACK
-
-This message conforms to 3GPP TS 08.18 § 10.4.11.
-
-After receiving it OsmoPCU completes the RESET procedure for BVC
-according to 3GPP TS 08.18 § 8.3.
-
-[[bvc_unblock]]
-==== BVC-UNBLOCK
-
-This message conforms to 3GPP TS 08.18 § 10.4.10 and is send by
-OsmoPCU as part of UNBLOCK procedure described in 3GPP TS 08.18 § 8.3.
-
-[[flow_ms_ack]]
-==== FLOW-CONTROL-MS-ACK
-
-This message is received and logged but ignored by OsmoPCU at the
-moment.
-
-[[flow_bvc_ack]]
-==== FLOW-CONTROL-BVC-ACK
-
-This message is received and logged but ignored by OsmoPCU at the
-moment.
-
-[[flow_bvc]]
-==== FLOW-CONTROL-BVC
-
-This message conforms to 3GPP TS 08.18 § 10.4.4, with the following
-limitations:
-
-* OsmoPCU does not support Current Bucket Level (CBL) feature so
- Bucket_Full Ratio (TS 08.18 § 11.3.46) IE is not transmitted as part
- of this message.
-
-[[flush_ll]]
-==== FLUSH-LL
-
-This message is received and logged but ignored by OsmoPCU at the
-moment.
-
-[[invoke_trace]]
-==== SGSN-INVOKE-TRACE
-
-This message is received and logged but ignored by OsmoPCU at the
-moment.
-
-[[bssgp_status]]
-==== STATUS
-
-This message conforms to 3GPP TS 08.18 § 10.4.14.
-
-=== Information Elements Overview
-
-All of the IEs handled by OsmoPCU are listed below, with limitations
-and additions to 3GPP TS 08.18 specified in more detail.
-
-==== IEs Conforming to 3GPP TS 08.18
-
-The following Information Elements are accepted by OsmoPCU. Not all
-IEs are actually evaluated.
-
-.IEs conforming to 3GPP TS 08.18
-[options="header",cols="5%,10%,40%,5%,40%"]
-|===
-| tag (hex) | TS 08.18 § | IE name | <-/-> | Received/Sent by OsmoPCU
-| 0x00 | 11.3.1 | Alignment Octets | <-/-> | Received/Sent
-| 0x01 | 11.3.2 | Bmax default MS | -> | Sent
-| 0x02 | 11.3.3 | BSS Area Indication | <- | Received
-| 0x03 | 11.3.4 | Bucket Leak Rate | -> | Sent
-| 0x04 | 11.3.6 | BVCI | <-/-> | Received/Sent
-| 0x05 | 11.3.5 | BVC Bucket Size | -> | Sent
-| 0x06 | 11.3.7 | BVC Measurement | -> | Sent
-| 0x07 | 11.3.8 | Cause | <-/-> | Received/Sent
-| 0x08 | 11.3.9 | Cell Identifier | -> | Sent
-| 0x09 | 11.3.10 | Channel needed | <- | Received
-| 0x0a | 11.3.11 | DRX Parameters | <- | Received
-| 0x0b | 11.3.12 | eMLPP-Priority | <- | Received
-| 0x0c | 11.3.13 | Flush Action | <- | Received
-| 0x0d | 11.3.14 | IMSI | <-/-> | Received/Sent
-| 0x0e | 11.3.15 | LLC-PDU | <-/-> | Received/Sent
-| 0x0f | 11.3.16 | LLC Frames Discarded | -> | Sent
-| 0x10 | 11.3.17 | Location Area | <- | Received
-| 0x11 | 11.3.20 | Mobile Id | <- | Received
-| 0x12 | 11.3.21 | MS Bucket Size | -> | Sent
-| 0x13 | 11.3.22 | MS Radio Access Capability | <- | Received
-| 0x14 | 11.3.23 | OMC Id | <- | Received
-| 0x15 | 11.3.24 | PDU In Error | <-/-> | Received/Sent
-| 0x16 | 11.3.25 | PDU Lifetime | <- | Received
-| 0x17 | 11.3.27 | Priority | <- | Received
-| 0x19 | 11.3.29 | Radio Cause | -> | Sent
-| 0x1a | 11.3.30 | RA-Cap-UPD-Cause | -> | Sent
-| 0x1b | 11.3.31 | Routeing Area | <-/-> | Received/Sent
-| 0x1c | 11.3.32 | R_default_MS | -> | Sent
-| 0x1d | 11.3.33 | Suspend Reference Number | <-/-> | Received/Sent
-| 0x1e | 11.3.34 | Tag | <-/-> | Received/Sent
-| 0x1f | 11.3.35 | TLLI | <-/-> | Received/Sent
-| 0x20 | 11.3.36 | TMSI | <-/-> | Received/Sent
-| 0x21 | 11.3.37 | Trace Reference | <- | Received
-| 0x22 | 11.3.38 | Trace Type | <- | Received
-| 0x23 | 11.3.39 | TransactionId | <- | Received
-| 0x24 | 11.3.40 | Trigger Id | <- | Received
-| 0x25 | 11.3.41 | Number of octets affected | -> | Sent
-| 0x26 | 11.3.18 | LSA Identifier List | -> | Sent
-| 0x27 | 11.3.19 | LSA Information | <- | Received
-| 0x28 | 11.3.42 | Packet Flow Identifier | <-/-> | Received/Sent
-| 0x3a | 11.3.43 | Aggregate BSS QoS Profile (ABQP) | <-/-> | Received/Sent
-| 0x3b | 11.3.45 | Feature Bitmap | <-/-> | Received/Sent
-| 0x3c | 11.3.46 | Bucket_Full Ratio | -> | Sent
-| 0x3d | 11.3.47 | Service UTRAN CCO (Cell Change Order) | <- | Received
-|===
-
-==== IEs Not Conforming to 3GPP TS 08.18
-
-.IEs not conforming to 3GPP TS 08.18
-[options="header",cols="5%,10%,30%,55%"]
-|===
-| tag (hex) | TS 08.18 § | IE name | Description
-| 0x18 | 11.3.28 | QoS Profile | Received value is ignored. Sent value is hard-coded to 0x4 (3 octets).
-|===
-
-==== Additional Attributes and Parameters
-
-There are no OsmoPCU specific additional Attributes and Parameters.
-
-=== Details on IEs
-
-==== BSS Area Indication
-
-This IE is ignored by OsmoPCU.
-
-==== Bucket Leak Rate
-
-The value used by OsmoPCU for this IE can be set through configuration
-file or vty via "flow-control force-ms-leak-rate <1-6553500>" command.
-
-==== BVC Bucket Size
-
-The value used by OsmoPCU for this IE can be set through configuration file or vty via
-"flow-control force-bvc-bucket-size <1-6553500>" command.
-
-==== Channel needed
-
-This IE is ignored because entire message which contains it is ignored
-by OsmoPCU - see <<paging_cs>> for details.
-
-==== DRX Parameters
-
-This IE is ignored by OsmoPCU.
-
-==== eMLPP-Priority
-
-This IE is ignored because entire message which contains it is ignored
-by OsmoPCU - see <<paging_cs>> for details.
-
-==== Flush Action
-
-This IE is ignored because entire message which contains it is ignored
-by OsmoPCU - see <<flush_ll>> for details.
-
-==== LLC Frames Discarded
-
-This IE is not available because entire message which contains it
-(LLC-DISCARDED) is not implemented by OsmoPCU - see for <<not_impl>>
-details.
-
-==== Location Area
-
-This IE is ignored by OsmoPCU.
-
-==== Mobile Id
-
-This IE is ignored because entire message which contains it is ignored
-by OsmoPCU - see <<invoke_trace>> for details.
-
-==== MS Bucket Size
-
-The value used by OsmoPCU for this IE can be set through configuration
-file or vty via "flow-control force-ms-bucket-size <1-6553500>"
-command.
-
-==== MS Radio Access Capability
-
-This IE is ignored by OsmoPCU.
-
-==== OMC Id
-
-This IE is ignored because entire message which contains it is ignored
-by OsmoPCU - see <<invoke_trace>> for details.
-
-==== Priority
-
-This IE is ignored by OsmoPCU.
-
-==== QoS Profile
-
-No QoS is supported by OsmoPCU so this IE is ignored or safe default
-used when mandatory.
-
-==== Radio Cause
-
-This IE is not available because entire message which contains it
-(RADIO-STATUS) is not implemented by OsmoPCU - see for <<not_impl>>
-details.
-
-==== RA-Cap-UPD-Cause
-
-This IE is not available because entire message which contains it
-(RA-CAPABILITY-UPDATE-ACK) is not implemented by OsmoPCU - see for
-<<not_impl>> details.
-
-==== Routeing Area
-
-This IE is ignored by OsmoPCU upon receiving.
-
-The messages which might require this IE to be send are not
-implemented by OsmoPCU - see for <<not_impl>> details.
-
-==== Suspend Reference Number
-
-This IE is ignored by OsmoPCU upon receiving.
-
-The messages which might require this IE to be send are not
-implemented by OsmoPCU - see for <<not_impl>> details.
-
-==== Tag
-
-This IE currently only used by OsmoPCU for Flow Control procedure (TS
-08.18 § 8.2). In other cases it's either ignored or unavailable.
-
-==== Trace Reference
-
-This IE is ignored because entire message which contains it is ignored
-by OsmoPCU - see <<invoke_trace>> for details.
-
-==== Trace Type
-
-This IE is ignored because entire message which contains it is ignored
-by OsmoPCU - see <<invoke_trace>> for details.
-
-==== TransactionId
-
-This IE is ignored because entire message which contains it is ignored
-by OsmoPCU - see <<invoke_trace>> for details.
-
-==== Trigger Id
-
-This IE is ignored because entire message which contains it is ignored
-by OsmoPCU - see <<invoke_trace>> for details.
-
-==== Number of octets affected
-
-This IE is not available because the messages which contains it
-(FLUSH-LL-ACK and LLC-DISCARDE) are not implemented by OsmoPCU - see
-for <<not_impl>> details.
-
-==== LSA Information
-
-This IE is ignored by OsmoPCU.
-
-==== LSA Identifier List
-
-This IE is not implemented by OsmoPCU.
-
-==== Packet Flow Identifier
-
-This IE is ignored by OsmoPCU upon receiving.
-
-The messages which might require this IE to be send are not
-implemented by OsmoPCU - see for <<not_impl>> details.
-
-==== Aggregate BSS QoS Profile (ABQP)
-
-This IE is ignored by OsmoPCU upon receiving.
-
-The messages which might require this IE to be send are not
-implemented by OsmoPCU - see for <<not_impl>> details.
-
-==== Feature Bitmap
-
-This IE is not implemented by OsmoPCU.
-
-This IE is ignored by OsmoPCU when received.
-
-Absence of Feature Bitmap automatically disables optional features for
-Network Service Entity (NSE) communicating with OsmoPCU.
-
-==== Bucket_Full Ratio
-
-This IE is not implemented by OsmoPCU.
-
-==== Service UTRAN CCO (Cell Change Order)
-
-This IE is ignored by OsmoPCU.
-
-=== Gb BSSGP Initialization / PCU bring-up
-
-The BSSGP initialization directly follows NS connection establishment
-described in <<ns_init>>.
-
-OsmoPCU allocates a BVC context for the BVCI given by OsmoBTS, which
-in turn receives it from OsmoBSC or OsmoNITB via OML procedures.
-
-In addition to the BVCI identifying the OsmoPCU side of BSSGP
-connection, there is also special BVCI which is accepted by OsmoPCU in
-accordance with 3GPP TS 08.18 § 5.4.1: BVCI = 0 represents signaling data
-between SGSN and PCU in contrast to PTP (Peer-To-Peer) user's data.
-
-The mapping between BSSGP PDUs and signaling or PTP BVCIs is available
-in 3GPP TS 08.18 Table 5.4.
diff --git a/OsmoPCU/gb/gb-startup.msc b/OsmoPCU/gb/gb-startup.msc
deleted file mode 100644
index d76022a..0000000
--- a/OsmoPCU/gb/gb-startup.msc
+++ /dev/null
@@ -1,27 +0,0 @@
-msc {
- hscale="1.2";
- bsc [label="BSC"], bts [label="BTS"], pcu [label="PCU"], sgsn [label="SGSN"];
-
- |||;
- bts box bsc [label="A-bis OML connection"];
- bsc => bts [label="Set OML Attrbibutes (NSVC,CELL)"];
- bts rbox pcu [label="PCU Unix Domain Socket"];
- pcu => bts [label="connect to PCU socket"];
- pcu <: bts [label="Config. parameters"];
- pcu rbox pcu [label="bind/connect UDP socket"];
- pcu note sgsn [label="NS-over-IP (UDP port 23000)"];
- pcu => sgsn [label="NS RESET"];
- pcu <= sgsn [label="NS RESET ACK"];
- ...;
- pcu => sgsn [label="NS UNBLOCK"];
- pcu <= sgsn [label="NS UNBLOCK ACK"];
- pcu box sgsn [label="NS link established"];
- ...;
- pcu => sgsn [label="BVC RESET"];
- pcu <= sgsn [label="BVC RESET ACK"];
- ...;
- pcu => sgsn [label="BVC UNBLOCK"];
- pcu <= sgsn [label="BVC UNBLOCK ACK"];
- pcu box sgsn [label="BSSGP link established"];
- |||;
-}
diff --git a/OsmoPCU/gb/ns.adoc b/OsmoPCU/gb/ns.adoc
deleted file mode 100644
index c94e018..0000000
--- a/OsmoPCU/gb/ns.adoc
+++ /dev/null
@@ -1,227 +0,0 @@
-== Network Service (NS)
-
-=== List of Messages
-
-The following tables list the NS messages used by OsmoPCU, grouped by their
-level of compliance with 3GPP TS 08.16.
-
-==== Messages Compliant With 3GPP TS 08.16
-
-The NS protocol is implemented inside libosmocore so none of the messages below are sent by OsmoPCU explicitly.
-Instead corresponding functions from libosmocore are called which send and receive messages as necessary. See <<ns_init>> for details
-on establishing NS connection.
-
-.Messages compliant with 3GPP TS 08.16
-[options="header",cols="10%,10%,20%,35%,5%,20%"]
-|===
-| TS 08.16 § | type code (hex) | This document § | Message | <-/-> | Received/Sent by OsmoPCU
-| 9.2.10 | 0x00 | <<ns_unit_data>> | NS-UNITDATA | <-/-> | Received/Sent
-| 9.2.5 | 0x02 | <<ns_reset>> | NS-RESET | <-/-> | Received/Sent
-| 9.2.6 | 0x03 | <<ns_reset_ack>> | NS-RESET-ACK | <-/-> | Received/Sent
-| 9.2.3 | 0x04 | <<ns_block>> | NS-BLOCK | <-/-> | Received/Sent
-| 9.2.4 | 0x05 | <<ns_block_ack>> | NS-BLOCK-ACK | <-/-> | Received/Sent
-| 9.2.8 | 0x06 | <<ns_unblock>> | NS-UNBLOCK | <-/-> | Received/Sent
-| 9.2.9 | 0x07 | <<ns_unblock_ack>> | NS-UNBLOCK-ACK | <-/-> | Received/Sent
-| 9.2.7 | 0x08 | <<ns_status>> | NS-STATUS | <-/-> | Received/Sent
-| 9.2.1 | 0x0a | <<ns_alive>> | NS-ALIVE | <-/-> | Received/Sent
-| 9.2.2 | 0x0b | <<ns_alive_ack>> | NS-ALIVE-ACK | <-/-> | Received/Sent
-|===
-
-==== Messages Specific to OsmoPCU
-
-There are no OsmoPCU specific NS messages.
-
-==== Messages Not Implemented by OsmoPCU
-
-All the NS protocol messages from 3GPP TS 08.16 are implemented in OsmoPCU.
-
-=== Details on Compliant NS Messages
-
-[[ns_unit_data]]
-==== NS-UNITDATA
-
-This PDU transfers one NS SDU (specified in 3GPP TS 08.18) between
-OsmoPCU and SGSN. Upon receiving it OsmoPCU passes it to BSSGP
-implementation to handle. It is also sent by BSSGP as necessary - see
-<<bssgp>> for details.
-
-It contains BVCI (<<ie_bvci>>) and NS SDU (<<ie_nssdu>>) IEs.
-
-[[ns_reset]]
-==== NS-RESET
-
-This message is send by OsmoPCU in order to initiate reset procedure
-described in 3GPP TS 08.16 § 7.3. The expected reply is NS-RESET-ACK
-(<<ns_reset_ack>>) message. If no expected reply is received in 3
-seconds than the sending is retried up to 3 times. When this message
-is received it is replied with NS-RESET-ACK (<<ns_reset_ack>>).
-It might be ignored under conditions described in 3GPP TS 08.16 § 7.3.1.
-
-The message conforms to 3GPP TS 08.16 § 9.2.5 specification.
-
-It contains Cause (<<ie_cause>>), NSVCI (<<ie_nsvci>>) and NSEI (<<ie_nsei>>) IEs.
-
-[[ns_reset_ack]]
-==== NS-RESET-ACK
-
-This message is sent as a response to proper NS-RESET (<<ns_reset>>)
-message initiating reset procedure.
-
-The message conforms to 3GPP TS 08.16 § 9.2.6 specification.
-
-It contains NSVCI (<<ie_nsvci>>) and NSEI (<<ie_nsei>>) IEs.
-
-[[ns_block]]
-==== NS-BLOCK
-
-Upon receiving this message corresponding NS-VC is marked as blocked
-by OsmoPCU and NS-BLOCK-ACK (<<ns_block_ack>>) reply is transmitted.
-When this message is sent by OsmoPCU corresponding NS-BLOCK-ACK
-(<<ns_block_ack>>) reply is expected before NS-VC is actually marked
-as blocked. This behavior follows the blocking procedure described in
-3GPP TS 08.16 § 7.2.
-
-The message conforms to 3GPP TS 08.16 § 9.2.3 specification.
-
-It contains Cause (<<ie_cause>>) and NSVCI (<<ie_nsvci>>) IEs.
-
-[[ns_block_ack]]
-==== NS-BLOCK-ACK
-
-This message is sent by OsmoPCU automatically upon reception of
-correct NS-BLOCK (<<ns_block>>) message. It is expected as a reply
-for NS-BLOCK (<<ns_block>>) message sent by OsmoPCU.
-
-The message conforms to 3GPP TS 08.16 § 9.2.4 specification.
-
-It contains NSVCI (<<ie_nsvci>>) IE.
-
-[[ns_unblock]]
-==== NS-UNBLOCK
-
-Upon receiving this message corresponding NS-VC is unblocked by
-OsmoPCU and NS-UNBLOCK-ACK (<<ns_unblock_ack>>) reply is sent. When
-this message is sent by OsmoPCU corresponding NS-UNBLOCK-ACK
-(<<ns_unblock_ack>>) reply is expected before NS-VC is actually marked
-as unblocked. This behavior follows the blocking procedure described
-in 3GPP TS 08.16 § 7.2.
-
-The message conforms to 3GPP TS 08.16 § 9.2.8 specification.
-
-[[ns_unblock_ack]]
-==== NS-UNBLOCK-ACK
-
-Receiving this message notifies OsmoPCU that NS-VC unblocking request
-is confirmed and thus NS-VC is marked as unblocked. This message is
-also sent as a reply to NS-UNBLOCK (<<ns_unblock>>) message.
-
-The message conforms to 3GPP TS 08.16 § 9.2.9 specification.
-
-[[ns_status]]
-==== NS-STATUS
-
-This message is sent to inform other party about error conditions as a
-response to various unexpected PDUs or PDUs with unexpected/missing
-data. If this message is received for unknown NS-VC it is ignored in
-accordance with 3GPP TS 08.16 § 7.5.1, otherwise the error cause is
-logged if present in NS-STATUS.
-
-The message conforms to 3GPP TS 08.16 § 9.2.7 specification.
-
-It contains Cause (<<ie_cause>>) and might (depending on actual error)
-contain NSVCI (<<ie_nsvci>>), NS PDU (<<ie_nspdu>>) and BVCI
-(<<ie_bvci>>) IEs.
-
-[[ns_alive]]
-==== NS-ALIVE
-
-This message is sent periodically to test connectivity according to
-3GPP TS 08.16 § 4.5.3. The expected response is NS-ALIVE-ACK
-(<<ns_alive_ack>>). If no such response arrives within given amount of
-time (3 seconds) than another NS-ALIVE message is sent and failed test
-attempt is recorded. After 10 failed attempts NS connection is
-considered dead and OsmoPCU tries to reconnect.
-
-The message conforms to 3GPP TS 08.16 § 9.2.1 specification.
-
-[[ns_alive_ack]]
-==== NS-ALIVE-ACK
-
-This message is sent automatically in reply to NS-ALIVE (<<ns_alive>>)
-message.
-
-The message conforms to 3GPP TS 08.16 § 9.2.2 specification.
-
-=== Information Elements Overview
-
-All of the IEs handled by OsmoPCU are listed below, with limitations and
-additions to 3GPP TS 08.16 specified in more detail.
-
-==== IEs Conforming to 3GPP TS 08.16
-
-The following Information Elements are accepted by OsmoPCU.
-
-.IEs conforming to 3GPP TS 08.16
-[options="header",cols="5%,10%,40%,5%,40%"]
-|===
-| tag (hex) | TS 08.16 § | IE name | <-/-> | Received/Sent by OsmoPCU
-| 0x00 | 10.3.2 | Cause | <-/-> | Received/Sent
-| 0x01 | 10.3.5 | NSVCI | <-/-> | Received/Sent
-| 0x02 | 10.3.3 | NS PDU | <-/-> | Received/Sent
-| 0x03 | 10.3.1 | BVCI | <-/-> | Received/Sent
-| 0x04 | 10.3.6 | NSEI | <-/-> | Received/Sent
-|===
-
-==== IEs Not Conforming to 3GPP TS 08.16
-
-All IEs defined in 3GPP TS 08.16 § 10.3 are supported by OsmoPCU.
-
-==== Additional Attributes and Parameters
-
-There are no OsmoPCU specific additional Attributes and Parameters.
-
-=== Details on IEs
-
-[[ie_cause]]
-==== Cause
-
-This IE contains reason for a procedure or error as described in 3GPP TS 08.16 § 10.3.2.
-
-[[ie_nsvci]]
-==== NSVCI
-
-This IE represents NSVCI identity described in <<ident>> and 3GPP TS 08.16 § 10.3.5.
-
-[[ie_nspdu]]
-==== NS PDU
-
-This IE contains PDU (possibly truncated) which cause error described
-in NS-STATUS message (<<ns_status>>) as described in 3GPP TS 08.16 §
-10.3.3.
-
-[[ie_nssdu]]
-==== NS SDU
-
-This IE contains BSSGP data - see <<bssgp>> for details.
-
-[[ie_bvci]]
-==== BVCI
-
-This IE represents BSSGP identity described in <<ident>> and 3GPP TS 08.16
-§ 10.3.1.
-
-[[ie_nsei]]
-==== NSEI
-
-This IE represents NSEI identity described in <<ident>> and 3GPP TS 08.16 §
-10.3.6.
-
-[[ns_init]]
-=== Gb NS Initialization / PCU bring-up
-
-OsmoPCU binds and connects an UDP socket for NS using port numbers and IP
-information given by OsmoBTS via the PCU socket. OsmoBTS in turn
-receives this information from the BSC vi A-bis OML.
-
-Following successful initialization of the UDP socket, the reset
-procedure is initiated as described in <<ns_reset>>.
diff --git a/OsmoPCU/osmopcu-gb-docinfo.xml b/OsmoPCU/osmopcu-gb-docinfo.xml
deleted file mode 100644
index 23ec3d1..0000000
--- a/OsmoPCU/osmopcu-gb-docinfo.xml
+++ /dev/null
@@ -1,58 +0,0 @@
-<revhistory>
- <revision>
- <revnumber>0</revnumber>
- <date>February 2016</date>
- <authorinitials>HW, MS</authorinitials>
- <revremark>
- Initial version, reflecting OsmoPCU master branch as on 2016-Mar-02
- (commit 22d7e75e1f160e5337140d9f3dcb2679b621b646).
- </revremark>
- </revision>
-</revhistory>
-
-<authorgroup>
- <author>
- <firstname>Max</firstname>
- <surname>Suraev</surname>
- <email>msuraev@sysmocom.de</email>
- <authorinitials>MS</authorinitials>
- <affiliation>
- <shortaffil>sysmocom</shortaffil>
- <orgname>sysmocom - s.f.m.c. GmbH</orgname>
- <jobtitle>Software Developer</jobtitle>
- </affiliation>
- </author>
- <author>
- <firstname>Harald</firstname>
- <surname>Welte</surname>
- <email>hwelte@sysmocom.de</email>
- <authorinitials>HW</authorinitials>
- <affiliation>
- <shortaffil>sysmocom</shortaffil>
- <orgname>sysmocom - s.f.m.c. GmbH</orgname>
- <jobtitle>Managing Director</jobtitle>
- </affiliation>
- </author>
-</authorgroup>
-
-<copyright>
- <year>2015-2016</year>
- <holder>sysmocom - s.f.m.c. GmbH</holder>
-</copyright>
-
-<legalnotice>
- <para>
- Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.3 or any later version published by the Free Software
- Foundation; with no Invariant Sections, no Front-Cover Texts,
- and no Back-Cover Texts. A copy of the license is included in
- the section entitled "GNU Free Documentation License".
- </para>
- <para>
- The Asciidoc source code of this manual can be found at
- <ulink url="http://git.osmocom.org/osmo-gsm-manuals/">
- http://git.osmocom.org/osmo-gsm-manuals/
- </ulink>
- </para>
-</legalnotice>
diff --git a/OsmoPCU/osmopcu-gb.adoc b/OsmoPCU/osmopcu-gb.adoc
deleted file mode 100644
index 00576c9..0000000
--- a/OsmoPCU/osmopcu-gb.adoc
+++ /dev/null
@@ -1,95 +0,0 @@
-:gfdl-enabled:
-
-OsmoPCU Gb Protocol Specification
-=================================
-Harald Welte <hwelte@sysmocom.de>
-
-== Introduction
-
-This document describes the Gb interface of *OsmoPCU*. Based on 3GPP TS
-08.16 and 08.18, this document indicates which of the 3GPP specified Gb
-messages and IEs are implemented according to 3GPP specifications, which of
-these are not or not fully implemented, as well as OsmoPCU-specific extensions
-to the Gb interface not specified by 3GPP.
-
-Extensions to the Gb interface specific to OsmoPCU are detailed in this
-document. For details on the messages and IEs that comply with above-mentioned
-3GPP specifications, please refer to those documents.
-
-.3GPP document versions referred to by this document
-[cols="20%,80%"]
-|===
-|3GPP TS 08.56 | version 8.0.1 Release 1999
-|3GPP TS 08.58 | version 8.6.0 Release 1999
-|3GPP TS 08.60 | version 8.2.1 Release 1999
-|3GPP TS 12.21 | version 8.0.0 Release 1999
-|3GPP TS 08.16 | version 8.0.1 Release 1999
-|3GPP TS 08.18 | version 8.12.0 Release 1999
-|===
-
-.IETF documents referred to by his document
-[cols="20%,80%"]
-|===
-|IETF RFC 768 | User Datagram Protocol
-|IETF RFC 791 | Internet Protocol
-|===
-
-== Overview
-
-The OsmoPCU Gb interface consists of the NS (Network Services) and
-BSSGP (Base Station Subsystem Gateway Protocol), encapsulated in UDP
-(User Datagram Protocol) and IP (Internet Protocol) version 4.
-Use of other underlying protocols (e. g. Frame Relay) is not supported.
-
-.UDP port numbers used by OsmoPCU Gb/IP
-[options="header",width="50%",cols="35%,65%"]
-|===
-|TCP Port Number|Usage
-|23000|NS over UDP (default port)
-|===
-
-The NS-over-UDP link is established in the PCU -> SGSN direction, i.e.
-the PCU is running as client while the SGSN is running as server.
-
-Establishment of the NS-over-UDP link is only possible after OsmoPCU
-has been configured via the *PCU socket* interface from OsmoBTS.
-
-OsmoBTS in turn receives relevant configuration parameters from
-OsmoBSC or the BSC component inside OsmoNITB.
-
-.Overview of Gb link establishment
-["mscgen"]
-----
-include::{srcdir}/gb/gb-startup.msc[]
-----
-
-[[ident]]
-=== Identities
-
-The Gb interface identities of the PCU are configured via BSC ->
-OsmoBTS -> PCU Socket. They consist of
-
-NSEI:: NS Equipment Identifier
-NSVCI:: NS Virtual Connection Identifier
-BVCI:: BSSGP Virtual Connection Identifier
-
-For an explanation of those identifiers and their use in the NS and
-BSSGP protocols, please see the relevant 3GPP specifications for NS (TS 08.16)
-and BSSGP (TS 08.18).
-
-In most cases, all above identities belong to different namespaces and
-must be unique within their respective namespace and within the SGSN
-they connect to.
-
-This means that typically each OsmoPCU has one unique set of NSEI,
-NSVCI and BVCI in your network.
-
-include::{srcdir}/gb/ns.adoc[]
-
-include::{srcdir}/gb/bssgp.adoc[]
-
-include::./common/chapters/port_numbers.adoc[]
-
-include::./common/chapters/glossary.adoc[]
-
-include::./common/chapters/gfdl.adoc[]
diff --git a/OsmoPCU/osmopcu-usermanual-docinfo.xml b/OsmoPCU/osmopcu-usermanual-docinfo.xml
deleted file mode 100644
index ecc6742..0000000
--- a/OsmoPCU/osmopcu-usermanual-docinfo.xml
+++ /dev/null
@@ -1,46 +0,0 @@
-<revhistory>
- <revision>
- <revnumber>1</revnumber>
- <date>February 13, 2016</date>
- <authorinitials>HW</authorinitials>
- <revremark>
- Initial version.
- </revremark>
- </revision>
-</revhistory>
-
-<authorgroup>
- <author>
- <firstname>Harald</firstname>
- <surname>Welte</surname>
- <email>hwelte@sysmocom.de</email>
- <authorinitials>HW</authorinitials>
- <affiliation>
- <shortaffil>sysmocom</shortaffil>
- <orgname>sysmocom - s.f.m.c. GmbH</orgname>
- <jobtitle>Managing Director</jobtitle>
- </affiliation>
- </author>
-</authorgroup>
-
-<copyright>
- <year>2013-2016</year>
- <holder>sysmocom - s.f.m.c. GmbH</holder>
-</copyright>
-
-<legalnotice>
- <para>
- Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.3 or any later version published by the Free Software
- Foundation; with no Invariant Sections, no Front-Cover Texts,
- and no Back-Cover Texts. A copy of the license is included in
- the section entitled "GNU Free Documentation License".
- </para>
- <para>
- The Asciidoc source code of this manual can be found at
- <ulink url="http://git.osmocom.org/osmo-gsm-manuals/">
- http://git.osmocom.org/osmo-gsm-manuals/
- </ulink>
- </para>
-</legalnotice>
diff --git a/OsmoPCU/osmopcu-usermanual.adoc b/OsmoPCU/osmopcu-usermanual.adoc
deleted file mode 100644
index bf25cfd..0000000
--- a/OsmoPCU/osmopcu-usermanual.adoc
+++ /dev/null
@@ -1,30 +0,0 @@
-:gfdl-enabled:
-
-OsmoPCU User Manual
-===================
-Harald Welte <hwelte@sysmocom.de>
-
-
-include::./common/chapters/preface.adoc[]
-
-include::{srcdir}/chapters/overview.adoc[]
-
-include::{srcdir}/chapters/running.adoc[]
-
-include::./common/chapters/vty.adoc[]
-
-include::./common/chapters/logging.adoc[]
-
-include::{srcdir}/chapters/configuration.adoc[]
-
-include::{srcdir}/chapters/counters.adoc[]
-
-include::./common/chapters/gb.adoc[]
-
-include::./common/chapters/port_numbers.adoc[]
-
-include::./common/chapters/bibliography.adoc[]
-
-include::./common/chapters/glossary.adoc[]
-
-include::./common/chapters/gfdl.adoc[]
diff --git a/OsmoPCU/osmopcu-vty-reference.xml b/OsmoPCU/osmopcu-vty-reference.xml
deleted file mode 100644
index f8c39ec..0000000
--- a/OsmoPCU/osmopcu-vty-reference.xml
+++ /dev/null
@@ -1,37 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- ex:ts=2:sw=42sts=2:et
- -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
--->
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN"
-"http://docbook.org/xml/5.0/dtd/docbook.dtd" [
-<!ENTITY chapter-vty SYSTEM "./common/chapters/vty.xml">
-<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" >
-]>
-
-<book>
- <info>
- <revhistory>
- <revision>
- <revnumber>v1</revnumber>
- <date>5th March 2014</date>
- <authorinitials>hf</authorinitials>
- <revremark>Initial version for 0.2-307</revremark>
- </revision>
- </revhistory>
-
- <title>OsmoPCU VTY Reference</title>
-
- <copyright>
- <year>2014</year>
- </copyright>
-
- <legalnotice>
- <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved.
- </para>
- </legalnotice>
- </info>
-
- <!-- Main chapters-->
- &chapter-vty;
-</book>
diff --git a/OsmoPCU/vty/osmo-pcu_vty_additions.xml b/OsmoPCU/vty/osmo-pcu_vty_additions.xml
deleted file mode 100644
index 55d75e4..0000000
--- a/OsmoPCU/vty/osmo-pcu_vty_additions.xml
+++ /dev/null
@@ -1,9 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
- <node id='14'>
- <child_of id='4' />
- <name>PCU Configuration Node</name>
- <description>The main PCU configuration including the timeslot
- assignment algorithm and other parameters.</description>
- </node>
-</vtydoc>
-
diff --git a/OsmoPCU/vty/osmo-pcu_vty_reference.xml b/OsmoPCU/vty/osmo-pcu_vty_reference.xml
deleted file mode 100644
index bf1532d..0000000
--- a/OsmoPCU/vty/osmo-pcu_vty_reference.xml
+++ /dev/null
@@ -1,941 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
- <node id='0'>
- </node>
- <node id='1'>
- <command id='show version'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='version' doc='Displays program version' />
- </params>
- </command>
- <command id='show online-help'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='online-help' doc='Online help' />
- </params>
- </command>
- <command id='list'>
- <params>
- <param name='list' doc='Print command list' />
- </params>
- </command>
- <command id='exit'>
- <params>
- <param name='exit' doc='Exit current mode and down to previous mode' />
- </params>
- </command>
- <command id='help'>
- <params>
- <param name='help' doc='Description of the interactive help system' />
- </params>
- </command>
- <command id='enable'>
- <params>
- <param name='enable' doc='Turn on privileged mode command' />
- </params>
- </command>
- <command id='terminal length &lt;0-512&gt;'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='length' doc='Set number of lines on a screen' />
- <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
- </params>
- </command>
- <command id='terminal no length'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='length' doc='Set number of lines on a screen' />
- </params>
- </command>
- <command id='echo .MESSAGE'>
- <params>
- <param name='echo' doc='Echo a message back to the vty' />
- <param name='.MESSAGE' doc='The message to echo' />
- </params>
- </command>
- <command id='who'>
- <params>
- <param name='who' doc='Display who is on vty' />
- </params>
- </command>
- <command id='show history'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='history' doc='Display the session command history' />
- </params>
- </command>
- <command id='logging enable'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='enable' doc='Enables logging to this vty' />
- </params>
- </command>
- <command id='logging disable'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='disable' doc='Disables logging to this vty' />
- </params>
- </command>
- <command id='logging filter all (0|1)'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='filter' doc='Filter log messages' />
- <param name='all' doc='Do you want to log all messages?' />
- <param name='0' doc='Only print messages matched by other filters' />
- <param name='1' doc='Bypass filter and print all messages' />
- </params>
- </command>
- <command id='logging color (0|1)'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='color' doc='Configure color-printing for log messages' />
- <param name='0' doc='Don&apos;t use color for printing messages' />
- <param name='1' doc='Use color for printing messages' />
- </params>
- </command>
- <command id='logging timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp' />
- </params>
- </command>
- <command id='logging set-log-mask MASK'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='set-log-mask' doc='Set the logmask of this logging target' />
- <param name='MASK' doc='The logmask to use' />
- </params>
- </command>
- <command id='logging set log mask MASK'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='set' doc='Decide which categories to output.' />
- <param name='log' doc='Log commands' />
- <param name='mask' doc='Mask commands' />
- <param name='MASK' doc='The logmask to use' />
- </params>
- </command>
- <command id='logging level (all|csn1|l1if|rlcmac|rlcmacdata|rlcmacdl|rlcmacul|rlcmacsched|rlcmacmeas|bssgp|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='all' doc='Global setting for all subsystems' />
- <param name='csn1' doc='Concrete Syntax Notation One (CSN1)' />
- <param name='l1if' doc='GPRS PCU L1 interface (L1IF)' />
- <param name='rlcmac' doc='GPRS RLC/MAC layer (RLCMAC)' />
- <param name='rlcmacdata' doc='GPRS RLC/MAC layer Data (RLCMAC)' />
- <param name='rlcmacdl' doc='GPRS RLC/MAC layer Downlink (RLCMAC)' />
- <param name='rlcmacul' doc='GPRS RLC/MAC layer Uplink (RLCMAC)' />
- <param name='rlcmacsched' doc='GPRS RLC/MAC layer Scheduling (RLCMAC)' />
- <param name='rlcmacmeas' doc='GPRS RLC/MAC layer Measurements (RLCMAC)' />
- <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
- <param name='pcu' doc='GPRS Packet Control Unit (PCU)' />
- <param name='lglobal' doc='Library-internal global log family' />
- <param name='llapd' doc='LAPD in libosmogsm' />
- <param name='linp' doc='A-bis Intput Subsystem' />
- <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
- <param name='lmi' doc='A-bis Input Driver for Signalling' />
- <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
- <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
- <param name='everything' doc='Log simply everything' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='show logging vty'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='logging' doc='Show current logging configuration' />
- <param name='vty' doc='Show current logging configuration for this vty' />
- </params>
- </command>
- <command id='show alarms'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='alarms' doc='Show current logging configuration' />
- </params>
- </command>
- <command id='show bts statistics'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='bts' doc='BTS related functionality' />
- <param name='statistics' doc='Statistics' />
- </params>
- </command>
- <command id='show tbf all'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='tbf' doc='information about all current TBFs' />
- <param name='all' doc='(null)' />
- </params>
- </command>
- </node>
- <node id='2'>
- </node>
- <node id='3'>
- <command id='help'>
- <params>
- <param name='help' doc='Description of the interactive help system' />
- </params>
- </command>
- <command id='list'>
- <params>
- <param name='list' doc='Print command list' />
- </params>
- </command>
- <command id='write terminal'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='terminal' doc='Write to terminal' />
- </params>
- </command>
- <command id='write file'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='file' doc='Write to configuration file' />
- </params>
- </command>
- <command id='write memory'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='memory' doc='Write configuration to the file (same as write file)' />
- </params>
- </command>
- <command id='write'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- </params>
- </command>
- <command id='show running-config'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='running-config' doc='running configuration' />
- </params>
- </command>
- <command id='exit'>
- <params>
- <param name='exit' doc='Exit current mode and down to previous mode' />
- </params>
- </command>
- <command id='disable'>
- <params>
- <param name='disable' doc='Turn off privileged mode command' />
- </params>
- </command>
- <command id='configure terminal'>
- <params>
- <param name='configure' doc='Configuration from vty interface' />
- <param name='terminal' doc='Configuration terminal' />
- </params>
- </command>
- <command id='copy running-config startup-config'>
- <params>
- <param name='copy' doc='Copy configuration' />
- <param name='running-config' doc='Copy running config to... ' />
- <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
- </params>
- </command>
- <command id='show startup-config'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='startup-config' doc='Contentes of startup configuration' />
- </params>
- </command>
- <command id='show version'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='version' doc='Displays program version' />
- </params>
- </command>
- <command id='show online-help'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='online-help' doc='Online help' />
- </params>
- </command>
- <command id='terminal length &lt;0-512&gt;'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='length' doc='Set number of lines on a screen' />
- <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
- </params>
- </command>
- <command id='terminal no length'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='length' doc='Set number of lines on a screen' />
- </params>
- </command>
- <command id='echo .MESSAGE'>
- <params>
- <param name='echo' doc='Echo a message back to the vty' />
- <param name='.MESSAGE' doc='The message to echo' />
- </params>
- </command>
- <command id='who'>
- <params>
- <param name='who' doc='Display who is on vty' />
- </params>
- </command>
- <command id='show history'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='history' doc='Display the session command history' />
- </params>
- </command>
- <command id='terminal monitor'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='monitor' doc='Copy debug output to the current terminal line' />
- </params>
- </command>
- <command id='terminal no monitor'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='monitor' doc='Copy debug output to the current terminal line' />
- </params>
- </command>
- <command id='logging enable'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='enable' doc='Enables logging to this vty' />
- </params>
- </command>
- <command id='logging disable'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='disable' doc='Disables logging to this vty' />
- </params>
- </command>
- <command id='logging filter all (0|1)'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='filter' doc='Filter log messages' />
- <param name='all' doc='Do you want to log all messages?' />
- <param name='0' doc='Only print messages matched by other filters' />
- <param name='1' doc='Bypass filter and print all messages' />
- </params>
- </command>
- <command id='logging color (0|1)'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='color' doc='Configure color-printing for log messages' />
- <param name='0' doc='Don&apos;t use color for printing messages' />
- <param name='1' doc='Use color for printing messages' />
- </params>
- </command>
- <command id='logging timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp' />
- </params>
- </command>
- <command id='logging set-log-mask MASK'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='set-log-mask' doc='Set the logmask of this logging target' />
- <param name='MASK' doc='The logmask to use' />
- </params>
- </command>
- <command id='logging set log mask MASK'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='set' doc='Decide which categories to output.' />
- <param name='log' doc='Log commands' />
- <param name='mask' doc='Mask commands' />
- <param name='MASK' doc='The logmask to use' />
- </params>
- </command>
- <command id='logging level (all|csn1|l1if|rlcmac|rlcmacdata|rlcmacdl|rlcmacul|rlcmacsched|rlcmacmeas|bssgp|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='all' doc='Global setting for all subsystems' />
- <param name='csn1' doc='Concrete Syntax Notation One (CSN1)' />
- <param name='l1if' doc='GPRS PCU L1 interface (L1IF)' />
- <param name='rlcmac' doc='GPRS RLC/MAC layer (RLCMAC)' />
- <param name='rlcmacdata' doc='GPRS RLC/MAC layer Data (RLCMAC)' />
- <param name='rlcmacdl' doc='GPRS RLC/MAC layer Downlink (RLCMAC)' />
- <param name='rlcmacul' doc='GPRS RLC/MAC layer Uplink (RLCMAC)' />
- <param name='rlcmacsched' doc='GPRS RLC/MAC layer Scheduling (RLCMAC)' />
- <param name='rlcmacmeas' doc='GPRS RLC/MAC layer Measurements (RLCMAC)' />
- <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
- <param name='pcu' doc='GPRS Packet Control Unit (PCU)' />
- <param name='lglobal' doc='Library-internal global log family' />
- <param name='llapd' doc='LAPD in libosmogsm' />
- <param name='linp' doc='A-bis Intput Subsystem' />
- <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
- <param name='lmi' doc='A-bis Input Driver for Signalling' />
- <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
- <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
- <param name='everything' doc='Log simply everything' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='show logging vty'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='logging' doc='Show current logging configuration' />
- <param name='vty' doc='Show current logging configuration for this vty' />
- </params>
- </command>
- <command id='show alarms'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='alarms' doc='Show current logging configuration' />
- </params>
- </command>
- <command id='show bts statistics'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='bts' doc='BTS related functionality' />
- <param name='statistics' doc='Statistics' />
- </params>
- </command>
- <command id='show tbf all'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='tbf' doc='information about all current TBFs' />
- <param name='all' doc='(null)' />
- </params>
- </command>
- </node>
- <node id='4'>
- <command id='help'>
- <params>
- <param name='help' doc='Description of the interactive help system' />
- </params>
- </command>
- <command id='list'>
- <params>
- <param name='list' doc='Print command list' />
- </params>
- </command>
- <command id='write terminal'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='terminal' doc='Write to terminal' />
- </params>
- </command>
- <command id='write file'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='file' doc='Write to configuration file' />
- </params>
- </command>
- <command id='write memory'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='memory' doc='Write configuration to the file (same as write file)' />
- </params>
- </command>
- <command id='write'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- </params>
- </command>
- <command id='show running-config'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='running-config' doc='running configuration' />
- </params>
- </command>
- <command id='exit'>
- <params>
- <param name='exit' doc='Exit current mode and down to previous mode' />
- </params>
- </command>
- <command id='end'>
- <params>
- <param name='end' doc='End current mode and change to enable mode.' />
- </params>
- </command>
- <command id='hostname WORD'>
- <params>
- <param name='hostname' doc='Set system&apos;s network name' />
- <param name='WORD' doc='This system&apos;s network name' />
- </params>
- </command>
- <command id='no hostname [HOSTNAME]'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='hostname' doc='Reset system&apos;s network name' />
- <param name='[HOSTNAME]' doc='Host name of this router' />
- </params>
- </command>
- <command id='password (8|) WORD'>
- <params>
- <param name='password' doc='Assign the terminal connection password' />
- <param name='8' doc='Specifies a HIDDEN password will follow' />
- <param name='' doc='dummy string ' />
- <param name='WORD' doc='The HIDDEN line password string' />
- </params>
- </command>
- <command id='password LINE'>
- <params>
- <param name='password' doc='Assign the terminal connection password' />
- <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
- </params>
- </command>
- <command id='enable password (8|) WORD'>
- <params>
- <param name='enable' doc='Modify enable password parameters' />
- <param name='password' doc='Assign the privileged level password' />
- <param name='8' doc='Specifies a HIDDEN password will follow' />
- <param name='' doc='dummy string ' />
- <param name='WORD' doc='The HIDDEN &apos;enable&apos; password string' />
- </params>
- </command>
- <command id='enable password LINE'>
- <params>
- <param name='enable' doc='Modify enable password parameters' />
- <param name='password' doc='Assign the privileged level password' />
- <param name='LINE' doc='The UNENCRYPTED (cleartext) &apos;enable&apos; password' />
- </params>
- </command>
- <command id='no enable password'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='enable' doc='Modify enable password parameters' />
- <param name='password' doc='Assign the privileged level password' />
- </params>
- </command>
- <command id='banner motd default'>
- <params>
- <param name='banner' doc='Set banner string' />
- <param name='motd' doc='Strings for motd' />
- <param name='default' doc='Default string' />
- </params>
- </command>
- <command id='banner motd file [FILE]'>
- <params>
- <param name='banner' doc='Set banner' />
- <param name='motd' doc='Banner for motd' />
- <param name='file' doc='Banner from a file' />
- <param name='[FILE]' doc='Filename' />
- </params>
- </command>
- <command id='no banner motd'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='banner' doc='Set banner string' />
- <param name='motd' doc='Strings for motd' />
- </params>
- </command>
- <command id='service terminal-length &lt;0-512&gt;'>
- <params>
- <param name='service' doc='Set up miscellaneous service' />
- <param name='terminal-length' doc='System wide terminal length configuration' />
- <param name='&lt;0-512&gt;' doc='Number of lines of VTY (0 means no line control)' />
- </params>
- </command>
- <command id='no service terminal-length [&lt;0-512&gt;]'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='service' doc='Set up miscellaneous service' />
- <param name='terminal-length' doc='System wide terminal length configuration' />
- <param name='[&lt;0-512&gt;]' doc='Number of lines of VTY (0 means no line control)' />
- </params>
- </command>
- <command id='line vty'>
- <params>
- <param name='line' doc='Configure a terminal line' />
- <param name='vty' doc='Virtual terminal' />
- </params>
- </command>
- <command id='service advanced-vty'>
- <params>
- <param name='service' doc='Set up miscellaneous service' />
- <param name='advanced-vty' doc='Enable advanced mode vty interface' />
- </params>
- </command>
- <command id='no service advanced-vty'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='service' doc='Set up miscellaneous service' />
- <param name='advanced-vty' doc='Enable advanced mode vty interface' />
- </params>
- </command>
- <command id='show history'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='history' doc='Display the session command history' />
- </params>
- </command>
- <command id='log stderr'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='stderr' doc='Logging via STDERR of the process' />
- </params>
- </command>
- <command id='no log stderr'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='stderr' doc='Logging via STDERR of the process' />
- </params>
- </command>
- <command id='log file .FILENAME'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='file' doc='Logging to text file' />
- <param name='.FILENAME' doc='Filename' />
- </params>
- </command>
- <command id='no log file .FILENAME'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='file' doc='Logging to text file' />
- <param name='.FILENAME' doc='Filename' />
- </params>
- </command>
- <command id='log alarms &lt;2-32700&gt;'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='alarms' doc='Logging alarms to osmo_strrb' />
- <param name='&lt;2-32700&gt;' doc='Maximum number of messages to log' />
- </params>
- </command>
- <command id='no log alarms'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='alarms' doc='Logging alarms to osmo_strrb' />
- </params>
- </command>
- <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='syslog' doc='Logging via syslog' />
- <param name='authpriv' doc='Security/authorization messages facility' />
- <param name='cron' doc='Clock daemon (cron/at) facility' />
- <param name='daemon' doc='General system daemon facility' />
- <param name='ftp' doc='Ftp daemon facility' />
- <param name='lpr' doc='Line printer facility' />
- <param name='mail' doc='Mail facility' />
- <param name='news' doc='News facility' />
- <param name='user' doc='Generic facility' />
- <param name='uucp' doc='UUCP facility' />
- </params>
- </command>
- <command id='log syslog local &lt;0-7&gt;'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='syslog' doc='Logging via syslog' />
- <param name='local' doc='Syslog LOCAL facility' />
- <param name='&lt;0-7&gt;' doc='Local facility number' />
- </params>
- </command>
- <command id='no log syslog'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='syslog' doc='Logging via syslog' />
- </params>
- </command>
- <command id='pcu'>
- <params>
- <param name='pcu' doc='BTS specific configure' />
- </params>
- </command>
- </node>
- <node id='7'>
- <command id='help'>
- <params>
- <param name='help' doc='Description of the interactive help system' />
- </params>
- </command>
- <command id='list'>
- <params>
- <param name='list' doc='Print command list' />
- </params>
- </command>
- <command id='write terminal'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='terminal' doc='Write to terminal' />
- </params>
- </command>
- <command id='write file'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='file' doc='Write to configuration file' />
- </params>
- </command>
- <command id='write memory'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='memory' doc='Write configuration to the file (same as write file)' />
- </params>
- </command>
- <command id='write'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- </params>
- </command>
- <command id='show running-config'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='running-config' doc='running configuration' />
- </params>
- </command>
- <command id='exit'>
- <params>
- <param name='exit' doc='Exit current mode and down to previous mode' />
- </params>
- </command>
- <command id='end'>
- <params>
- <param name='end' doc='End current mode and change to enable mode.' />
- </params>
- </command>
- <command id='logging filter all (0|1)'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='filter' doc='Filter log messages' />
- <param name='all' doc='Do you want to log all messages?' />
- <param name='0' doc='Only print messages matched by other filters' />
- <param name='1' doc='Bypass filter and print all messages' />
- </params>
- </command>
- <command id='logging color (0|1)'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='color' doc='Configure color-printing for log messages' />
- <param name='0' doc='Don&apos;t use color for printing messages' />
- <param name='1' doc='Use color for printing messages' />
- </params>
- </command>
- <command id='logging timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp' />
- </params>
- </command>
- <command id='logging level (all|csn1|l1if|rlcmac|rlcmacdata|rlcmacdl|rlcmacul|rlcmacsched|rlcmacmeas|bssgp|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure log message to this terminal' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='all' doc='Global setting for all subsystems' />
- <param name='csn1' doc='Concrete Syntax Notation One (CSN1)' />
- <param name='l1if' doc='GPRS PCU L1 interface (L1IF)' />
- <param name='rlcmac' doc='GPRS RLC/MAC layer (RLCMAC)' />
- <param name='rlcmacdata' doc='GPRS RLC/MAC layer Data (RLCMAC)' />
- <param name='rlcmacdl' doc='GPRS RLC/MAC layer Downlink (RLCMAC)' />
- <param name='rlcmacul' doc='GPRS RLC/MAC layer Uplink (RLCMAC)' />
- <param name='rlcmacsched' doc='GPRS RLC/MAC layer Scheduling (RLCMAC)' />
- <param name='rlcmacmeas' doc='GPRS RLC/MAC layer Measurements (RLCMAC)' />
- <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
- <param name='pcu' doc='GPRS Packet Control Unit (PCU)' />
- <param name='lglobal' doc='Library-internal global log family' />
- <param name='llapd' doc='LAPD in libosmogsm' />
- <param name='linp' doc='A-bis Intput Subsystem' />
- <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
- <param name='lmi' doc='A-bis Input Driver for Signalling' />
- <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
- <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
- <param name='everything' doc='Log simply everything' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- </node>
- <node id='8'>
- <command id='help'>
- <params>
- <param name='help' doc='Description of the interactive help system' />
- </params>
- </command>
- <command id='list'>
- <params>
- <param name='list' doc='Print command list' />
- </params>
- </command>
- <command id='write terminal'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='terminal' doc='Write to terminal' />
- </params>
- </command>
- <command id='write file'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='file' doc='Write to configuration file' />
- </params>
- </command>
- <command id='write memory'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='memory' doc='Write configuration to the file (same as write file)' />
- </params>
- </command>
- <command id='write'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- </params>
- </command>
- <command id='show running-config'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='running-config' doc='running configuration' />
- </params>
- </command>
- <command id='exit'>
- <params>
- <param name='exit' doc='Exit current mode and down to previous mode' />
- </params>
- </command>
- <command id='end'>
- <params>
- <param name='end' doc='End current mode and change to enable mode.' />
- </params>
- </command>
- <command id='login'>
- <params>
- <param name='login' doc='Enable password checking' />
- </params>
- </command>
- <command id='no login'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='login' doc='Enable password checking' />
- </params>
- </command>
- </node>
- <node id='14'>
- <command id='help'>
- <params>
- <param name='help' doc='Description of the interactive help system' />
- </params>
- </command>
- <command id='list'>
- <params>
- <param name='list' doc='Print command list' />
- </params>
- </command>
- <command id='write terminal'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='terminal' doc='Write to terminal' />
- </params>
- </command>
- <command id='write file'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='file' doc='Write to configuration file' />
- </params>
- </command>
- <command id='write memory'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='memory' doc='Write configuration to the file (same as write file)' />
- </params>
- </command>
- <command id='write'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- </params>
- </command>
- <command id='show running-config'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='running-config' doc='running configuration' />
- </params>
- </command>
- <command id='no two-phase-access'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='two-phase-access' doc='Only use two phase access when requested my MS' />
- </params>
- </command>
- <command id='cs &lt;1-4&gt; [&lt;1-4&gt;]'>
- <params>
- <param name='cs' doc='Set the Coding Scheme to be used, (overrides BTS config)' />
- <param name='&lt;1-4&gt;' doc='Initial CS used' />
- <param name='[&lt;1-4&gt;]' doc='Alternative uplink CS' />
- </params>
- </command>
- <command id='no cs'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='cs' doc='Don&apos;t force given Coding Scheme, (use BTS config)' />
- </params>
- </command>
- <command id='queue lifetime &lt;1-65534&gt;'>
- <params>
- <param name='queue' doc='Packet queue options' />
- <param name='lifetime' doc='Set lifetime limit of LLC frame in centi-seconds (overrides the value given by SGSN)' />
- <param name='&lt;1-65534&gt;' doc='Lifetime in centi-seconds' />
- </params>
- </command>
- <command id='queue lifetime infinite'>
- <params>
- <param name='queue' doc='Packet queue options' />
- <param name='lifetime' doc='Set lifetime limit of LLC frame in centi-seconds (overrides the value given by SGSN)' />
- <param name='infinite' doc='Infinite lifetime' />
- </params>
- </command>
- <command id='no queue lifetime'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='queue' doc='Packet queue options' />
- <param name='lifetime' doc='Disable lifetime limit of LLC frame (use value given by SGSN)' />
- </params>
- </command>
- <command id='alloc-algorithm (a|b)'>
- <params>
- <param name='alloc-algorithm' doc='Select slot allocation algorithm to use when assigning timeslots on PACCH' />
- <param name='a' doc='Single slot is assigned only' />
- <param name='b' doc='Multiple slots are assigned for semi-duplex operation' />
- </params>
- </command>
- <command id='two-phase-access'>
- <params>
- <param name='two-phase-access' doc='Force two phase access when MS requests single phase access' />
- </params>
- </command>
- <command id='flow-control-interval &lt;1-10&gt;'>
- <params>
- <param name='flow-control-interval' doc='Interval between sending subsequent Flow Control PDUs' />
- <param name='&lt;1-10&gt;' doc='Interval time in seconds' />
- </params>
- </command>
- <command id='alpha &lt;0-10&gt;'>
- <params>
- <param name='alpha' doc='Alpha parameter for MS power control in units of 0.1 (see TS 05.08) NOTE: Be sure to set Alpha value at System information 13 too.' />
- <param name='&lt;0-10&gt;' doc='Alpha in units of 0.1' />
- </params>
- </command>
- <command id='gamma &lt;0-62&gt;'>
- <params>
- <param name='gamma' doc='Gamma parameter for MS power control in units of dB (see TS 05.08)' />
- <param name='&lt;0-62&gt;' doc='Gamma in even unit of dBs' />
- </params>
- </command>
- <command id='end'>
- <params>
- <param name='end' doc='End current mode and change to enable mode' />
- </params>
- </command>
- </node>
-</vtydoc> \ No newline at end of file