remove OsmoPCU files (now avail in osmo-pcu.git)

Files were added in osmo-pcu.git Change-Id
I7270652de393a98748c0cdc51e626c17ab8f44c2

Depends: osmo-pcu.git Change-Id I7270652de393a98748c0cdc51e626c17ab8f44c2
Related: OS#3385
Change-Id: I2a1de294883491487aa270b1e30160d559ef063a

1 files changed, 0 insertions, 95 deletions

diff --git a/OsmoPCU/osmopcu-gb.adoc b/OsmoPCU/osmopcu-gb.adoc
deleted file mode 100644
index 00576c9..0000000
--- a/OsmoPCU/osmopcu-gb.adoc
+++ /dev/null
@@ -1,95 +0,0 @@
-:gfdl-enabled:
-
-OsmoPCU Gb Protocol Specification
-=================================
-Harald Welte <hwelte@sysmocom.de>
-
-== Introduction
-
-This document describes the Gb interface of *OsmoPCU*. Based on 3GPP TS
-08.16 and 08.18, this document indicates which of the 3GPP specified Gb
-messages and IEs are implemented according to 3GPP specifications, which of
-these are not or not fully implemented, as well as OsmoPCU-specific extensions
-to the Gb interface not specified by 3GPP.
-
-Extensions to the Gb interface specific to OsmoPCU are detailed in this
-document. For details on the messages and IEs that comply with above-mentioned
-3GPP specifications, please refer to those documents.
-
-.3GPP document versions referred to by this document
-[cols="20%,80%"]
-|===
-|3GPP TS 08.56 | version 8.0.1 Release 1999
-|3GPP TS 08.58 | version 8.6.0 Release 1999
-|3GPP TS 08.60 | version 8.2.1 Release 1999
-|3GPP TS 12.21 | version 8.0.0 Release 1999
-|3GPP TS 08.16 | version 8.0.1 Release 1999
-|3GPP TS 08.18 | version 8.12.0 Release 1999
-|===
-
-.IETF documents referred to by his document
-[cols="20%,80%"]
-|===
-|IETF RFC 768 | User Datagram Protocol
-|IETF RFC 791 | Internet Protocol
-|===
-
-== Overview
-
-The OsmoPCU Gb interface consists of the NS (Network Services) and
-BSSGP (Base Station Subsystem Gateway Protocol), encapsulated in UDP
-(User Datagram Protocol) and IP (Internet Protocol) version 4.
-Use of other underlying protocols (e. g. Frame Relay) is not supported.
-
-.UDP port numbers used by OsmoPCU Gb/IP
-[options="header",width="50%",cols="35%,65%"]
-|===
-|TCP Port Number|Usage
-|23000|NS over UDP (default port)
-|===
-
-The NS-over-UDP link is established in the PCU -> SGSN direction, i.e.
-the PCU is running as client while the SGSN is running as server.
-
-Establishment of the NS-over-UDP link is only possible after OsmoPCU
-has been configured via the *PCU socket* interface from OsmoBTS.
-
-OsmoBTS in turn receives relevant configuration parameters from
-OsmoBSC or the BSC component inside OsmoNITB.
-
-.Overview of Gb link establishment
-["mscgen"]
-----
-include::{srcdir}/gb/gb-startup.msc[]
-----
-
-[[ident]]
-=== Identities
-
-The Gb interface identities of the PCU are configured via BSC ->
-OsmoBTS -> PCU Socket. They consist of
-
-NSEI:: NS Equipment Identifier
-NSVCI:: NS Virtual Connection Identifier
-BVCI:: BSSGP Virtual Connection Identifier
-
-For an explanation of those identifiers and their use in the NS and
-BSSGP protocols, please see the relevant 3GPP specifications for NS (TS 08.16)
-and BSSGP (TS 08.18).
-
-In most cases, all above identities belong to different namespaces and
-must be unique within their respective namespace and within the SGSN
-they connect to.
-
-This means that typically each OsmoPCU has one unique set of NSEI,
-NSVCI and BVCI in your network.
-
-include::{srcdir}/gb/ns.adoc[]
-
-include::{srcdir}/gb/bssgp.adoc[]
-
-include::./common/chapters/port_numbers.adoc[]
-
-include::./common/chapters/glossary.adoc[]
-
-include::./common/chapters/gfdl.adoc[]