diff options
| author | Daniel Willmann <dwillmann@sysmocom.de> | 2019-04-04 11:31:05 +0200 |
|---|---|---|
| committer | Daniel Willmann <dwillmann@sysmocom.de> | 2019-04-04 11:31:05 +0200 |
| commit | ece90c1377fe1abad64528fdc2ff4fb35668cafc (patch) | |
| tree | 1a736e485b3351fb6b764cfe2883643b2a61f79e | |
| parent | 4c946ee293ae4afed7d63c636b11b6cd01a545ea (diff) | |
bts: Change VTY sample output from OpenBSC to OsmoBSC
Change-Id: Id473b625f47b3cf7ee10ced866d49eb678161719
| -rw-r--r-- | common/chapters/bts.adoc | 34 |
1 files changed, 17 insertions, 17 deletions
diff --git a/common/chapters/bts.adoc b/common/chapters/bts.adoc index 30a33cc..6228310 100644 --- a/common/chapters/bts.adoc +++ b/common/chapters/bts.adoc @@ -18,7 +18,7 @@ In order to view the status and properties of a BTS, you can issue the information about all provisioned BTS numbers. ---- -OpenBSC> show bts 0 +OsmoBSC> show bts 0 BTS 0 is of nanobts type in band DCS1800, has CI 0 LAC 1, BSIC 63, TSC 7 and 1 TRX Description: (null) MS Max power: 15 dBm @@ -41,7 +41,7 @@ You can also review the status of the TRXs configured within the BTSs of this BSC by using `show trx`: ---- -OpenBSC> show trx 0 0 +OsmoBSC> show trx 0 0 TRX 0 of BTS 0 is on ARFCN 871 Description: (null) RF Nominal Power: 23 dBm, reduced by 0 dB, resulting BS power: 23 dBm @@ -62,10 +62,10 @@ a single timeslot by specifying the BTS, TRX and TS numbers (`show timeslot 0 0 4`). ---- -OpenBSC> show timeslot 0 0 0 +OsmoBSC> show timeslot 0 0 0 BTS 0, TRX 0, Timeslot 0, phys cfg CCCH, TSC 7 NM State: Oper 'Enabled', Admin 2, Avail 'OK' -OpenBSC> show timeslot 0 0 1 +OsmoBSC> show timeslot 0 0 1 BTS 0, TRX 0, Timeslot 1, phys cfg SDCCH8, TSC 7 NM State: Oper 'Enabled', Admin 2, Avail 'OK' ---- @@ -78,11 +78,11 @@ VTY. In order to configure BTS 0, you can issue the following sequence of commands: ---- -OpenBSC> enable -OpenBSC# configure terminal -OpenBSC(config)# network -OpenBSC(config-net)# bts 0 -OpenBSC(config-net-bts)# +OsmoBSC> enable +OsmoBSC# configure terminal +OsmoBSC(config)# network +OsmoBSC(config-net)# bts 0 +OsmoBSC(config-net-bts)# ---- At this point, you have a plethora of commands, in fact an entire @@ -201,14 +201,14 @@ But let's first start with a small example .Example configuration of GPRS PCU parameters at VTY BTS node ---- -OpenBSC(config-net-bts)# gprs mode gprs -OpenBSC(config-net-bts)# gprs routing area 1 -OpenBSC(config-net-bts)# gprs cell bvci 1234 -OpenBSC(config-net-bts)# gprs nsei 1234 -OpenBSC(config-net-bts)# gprs nsvc 0 nsvci 1234 -OpenBSC(config-net-bts)# gprs nsvc 0 local udp port 23000 -OpenBSC(config-net-bts)# gprs nsvc 0 remote udp port 23000 -OpenBSC(config-net-bts)# gprs nsvc 0 remote ip 192.168.100.239 +OsmoBSC(config-net-bts)# gprs mode gprs +OsmoBSC(config-net-bts)# gprs routing area 1 +OsmoBSC(config-net-bts)# gprs cell bvci 1234 +OsmoBSC(config-net-bts)# gprs nsei 1234 +OsmoBSC(config-net-bts)# gprs nsvc 0 nsvci 1234 +OsmoBSC(config-net-bts)# gprs nsvc 0 local udp port 23000 +OsmoBSC(config-net-bts)# gprs nsvc 0 remote udp port 23000 +OsmoBSC(config-net-bts)# gprs nsvc 0 remote ip 192.168.100.239 ---- |