From e010dea56e61ac721fa7eb9cb216ca0373f7a4cc Mon Sep 17 00:00:00 2001
From: Neels Hofmeyr <neels@hofmeyr.de>
Date: Sat, 9 Dec 2017 03:26:01 +0100
Subject: OsmoGGSN vty: update VTY reference

Apply VTY reference changes from libosmocore: change node IDs from index
numbers to meaningful names from VTY node prompts.

Introduce section with common commands, do not repeat the common commands on
each child node.

Populate section names (so far empty).

Add apn / gpdu VTY reference.

This is generated using the recent libosmocore vty doc patches that conclude in
libosmocore change-id Iedd67750539b676271de0e0e9316d4e6f794406a.

Change-Id: Ia269c4bda0aa0b905abcccc75338f5f808e01727
---
 doc/manuals/vty/ggsn_vty_reference.xml | 507 ++++++++-------------------------
 1 file changed, 116 insertions(+), 391 deletions(-)

(limited to 'doc')

diff --git a/doc/manuals/vty/ggsn_vty_reference.xml b/doc/manuals/vty/ggsn_vty_reference.xml
index 696f1f2..76a55c1 100644
--- a/doc/manuals/vty/ggsn_vty_reference.xml
+++ b/doc/manuals/vty/ggsn_vty_reference.xml
@@ -1,22 +1,44 @@
 <vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
-  <node id='0'>
-  </node>
-  <node id='1'>
-    <command id='show version'>
+  <node id='_common_cmds_'>
+    <name>Common Commands</name>
+    <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
+    <command id='help'>
       <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
+        <param name='help' doc='Description of the interactive help system' />
       </params>
     </command>
-    <command id='show online-help'>
+    <command id='list'>
       <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
+        <param name='list' doc='Print command list' />
       </params>
     </command>
-    <command id='list'>
+    <command id='write terminal'>
       <params>
-        <param name='list' doc='Print command list' />
+        <param name='write' doc='Write running configuration to memory, network, or terminal' />
+        <param name='terminal' doc='Write to terminal' />
+      </params>
+    </command>
+    <command id='write file'>
+      <params>
+        <param name='write' doc='Write running configuration to memory, network, or terminal' />
+        <param name='file' doc='Write to configuration file' />
+      </params>
+    </command>
+    <command id='write memory'>
+      <params>
+        <param name='write' doc='Write running configuration to memory, network, or terminal' />
+        <param name='memory' doc='Write configuration to the file (same as write file)' />
+      </params>
+    </command>
+    <command id='write'>
+      <params>
+        <param name='write' doc='Write running configuration to memory, network, or terminal' />
+      </params>
+    </command>
+    <command id='show running-config'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='running-config' doc='running configuration' />
       </params>
     </command>
     <command id='exit'>
@@ -24,9 +46,24 @@
         <param name='exit' doc='Exit current mode and down to previous mode' />
       </params>
     </command>
-    <command id='help'>
+    <command id='end'>
       <params>
-        <param name='help' doc='Description of the interactive help system' />
+        <param name='end' doc='End current mode and change to enable mode.' />
+      </params>
+    </command>
+  </node>
+  <node id='view'>
+    <name>view</name>
+    <command id='show version'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='version' doc='Displays program version' />
+      </params>
+    </command>
+    <command id='show online-help'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='online-help' doc='Online help' />
       </params>
     </command>
     <command id='enable'>
@@ -67,19 +104,19 @@
     </command>
     <command id='logging enable'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='enable' doc='Enables logging to this vty' />
       </params>
     </command>
     <command id='logging disable'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='disable' doc='Disables logging to this vty' />
       </params>
     </command>
     <command id='logging filter all (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='filter' doc='Filter log messages' />
         <param name='all' doc='Do you want to log all messages?' />
         <param name='0' doc='Only print messages matched by other filters' />
@@ -88,7 +125,7 @@
     </command>
     <command id='logging color (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='color' doc='Configure color-printing for log messages' />
         <param name='0' doc='Don&apos;t use color for printing messages' />
         <param name='1' doc='Use color for printing messages' />
@@ -96,7 +133,7 @@
     </command>
     <command id='logging timestamp (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='timestamp' doc='Configure log message timestamping' />
         <param name='0' doc='Don&apos;t prefix each log message' />
         <param name='1' doc='Prefix each log message with current timestamp' />
@@ -104,7 +141,7 @@
     </command>
     <command id='logging print extended-timestamp (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='print' doc='Log output settings' />
         <param name='extended-timestamp' doc='Configure log message timestamping' />
         <param name='0' doc='Don&apos;t prefix each log message' />
@@ -113,7 +150,7 @@
     </command>
     <command id='logging print category (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='print' doc='Log output settings' />
         <param name='category' doc='Configure log message' />
         <param name='0' doc='Don&apos;t prefix each log message' />
@@ -122,23 +159,23 @@
     </command>
     <command id='logging set-log-mask MASK'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='The logmask to use' />
+        <param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
       </params>
     </command>
     <command id='logging set log mask MASK'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='set' doc='Decide which categories to output.' />
         <param name='log' doc='Log commands' />
         <param name='mask' doc='Mask commands' />
-        <param name='MASK' doc='The logmask to use' />
+        <param name='MASK' doc='&apos;set log mask&apos; is deprecated, please refer to the docs of &apos;set-log-mask&apos; instead' />
       </params>
     </command>
     <command id='logging level (all|ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='level' doc='Set the log level for a specified category' />
         <param name='all' doc='Global setting for all subsystems' />
         <param name='ip' doc='IP Pool and other groups' />
@@ -234,53 +271,8 @@
       </params>
     </command>
   </node>
-  <node id='2'>
-  </node>
-  <node id='3'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
+  <node id='enable'>
+    <name>enable</name>
     <command id='disable'>
       <params>
         <param name='disable' doc='Turn off privileged mode command' />
@@ -363,19 +355,19 @@
     </command>
     <command id='logging enable'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='enable' doc='Enables logging to this vty' />
       </params>
     </command>
     <command id='logging disable'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='disable' doc='Disables logging to this vty' />
       </params>
     </command>
     <command id='logging filter all (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='filter' doc='Filter log messages' />
         <param name='all' doc='Do you want to log all messages?' />
         <param name='0' doc='Only print messages matched by other filters' />
@@ -384,7 +376,7 @@
     </command>
     <command id='logging color (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='color' doc='Configure color-printing for log messages' />
         <param name='0' doc='Don&apos;t use color for printing messages' />
         <param name='1' doc='Use color for printing messages' />
@@ -392,7 +384,7 @@
     </command>
     <command id='logging timestamp (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='timestamp' doc='Configure log message timestamping' />
         <param name='0' doc='Don&apos;t prefix each log message' />
         <param name='1' doc='Prefix each log message with current timestamp' />
@@ -400,7 +392,7 @@
     </command>
     <command id='logging print extended-timestamp (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='print' doc='Log output settings' />
         <param name='extended-timestamp' doc='Configure log message timestamping' />
         <param name='0' doc='Don&apos;t prefix each log message' />
@@ -409,7 +401,7 @@
     </command>
     <command id='logging print category (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='print' doc='Log output settings' />
         <param name='category' doc='Configure log message' />
         <param name='0' doc='Don&apos;t prefix each log message' />
@@ -418,23 +410,23 @@
     </command>
     <command id='logging set-log-mask MASK'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='The logmask to use' />
+        <param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
       </params>
     </command>
     <command id='logging set log mask MASK'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='set' doc='Decide which categories to output.' />
         <param name='log' doc='Log commands' />
         <param name='mask' doc='Mask commands' />
-        <param name='MASK' doc='The logmask to use' />
+        <param name='MASK' doc='&apos;set log mask&apos; is deprecated, please refer to the docs of &apos;set-log-mask&apos; instead' />
       </params>
     </command>
     <command id='logging level (all|ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='level' doc='Set the log level for a specified category' />
         <param name='all' doc='Global setting for all subsystems' />
         <param name='ip' doc='IP Pool and other groups' />
@@ -530,56 +522,8 @@
       </params>
     </command>
   </node>
-  <node id='4'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
+  <node id='config'>
+    <name>config</name>
     <command id='hostname WORD'>
       <params>
         <param name='hostname' doc='Set system&apos;s network name' />
@@ -827,59 +771,11 @@
       </params>
     </command>
   </node>
-  <node id='7'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
+  <node id='config-log'>
+    <name>config-log</name>
     <command id='logging filter all (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='filter' doc='Filter log messages' />
         <param name='all' doc='Do you want to log all messages?' />
         <param name='0' doc='Only print messages matched by other filters' />
@@ -888,7 +784,7 @@
     </command>
     <command id='logging color (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='color' doc='Configure color-printing for log messages' />
         <param name='0' doc='Don&apos;t use color for printing messages' />
         <param name='1' doc='Use color for printing messages' />
@@ -896,7 +792,7 @@
     </command>
     <command id='logging timestamp (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='timestamp' doc='Configure log message timestamping' />
         <param name='0' doc='Don&apos;t prefix each log message' />
         <param name='1' doc='Prefix each log message with current timestamp' />
@@ -904,7 +800,7 @@
     </command>
     <command id='logging print extended-timestamp (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='print' doc='Log output settings' />
         <param name='extended-timestamp' doc='Configure log message timestamping' />
         <param name='0' doc='Don&apos;t prefix each log message' />
@@ -913,16 +809,23 @@
     </command>
     <command id='logging print category (0|1)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='print' doc='Log output settings' />
         <param name='category' doc='Configure log message' />
         <param name='0' doc='Don&apos;t prefix each log message' />
         <param name='1' doc='Prefix each log message with category/subsystem name' />
       </params>
     </command>
+    <command id='logging set-log-mask MASK'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='set-log-mask' doc='Set the logmask of this logging target' />
+        <param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
+      </params>
+    </command>
     <command id='logging level (all|ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'>
       <params>
-        <param name='logging' doc='Configure log message to this terminal' />
+        <param name='logging' doc='Configure logging' />
         <param name='level' doc='Set the log level for a specified category' />
         <param name='all' doc='Global setting for all subsystems' />
         <param name='ip' doc='IP Pool and other groups' />
@@ -956,56 +859,8 @@
       </params>
     </command>
   </node>
-  <node id='8'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
+  <node id='config-stats'>
+    <name>config-stats</name>
     <command id='local-ip ADDR'>
       <params>
         <param name='local-ip' doc='Set the IP address to which we bind locally' />
@@ -1073,56 +928,8 @@
       </params>
     </command>
   </node>
-  <node id='9'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
+  <node id='config-line'>
+    <name>config-line</name>
     <command id='login'>
       <params>
         <param name='login' doc='Enable password checking' />
@@ -1141,7 +948,8 @@
       </params>
     </command>
   </node>
-  <node id='14'>
+  <node id='config-ctrl'>
+    <name>config-ctrl</name>
     <command id='bind A.B.C.D'>
       <params>
         <param name='bind' doc='Set bind address to listen for Control connections' />
@@ -1149,56 +957,8 @@
       </params>
     </command>
   </node>
-  <node id='26'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
+  <node id='config-ggsn'>
+    <name>config-ggsn</name>
     <command id='description .TEXT'>
       <params>
         <param name='description' doc='Save human-readable description of the object' />
@@ -1278,56 +1038,8 @@
       </params>
     </command>
   </node>
-  <node id='27'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
+  <node id='config-ggsn-apn'>
+    <name>config-ggsn-apn</name>
     <command id='description .TEXT'>
       <params>
         <param name='description' doc='Save human-readable description of the object' />
@@ -1476,5 +1188,18 @@
         <param name='ifconfig' doc='GGSN-based interface configuration' />
       </params>
     </command>
+    <command id='g-pdu tx-sequence-numbers'>
+      <params>
+        <param name='g-pdu' doc='G-PDU Configuration' />
+        <param name='tx-sequence-numbers' doc='Enable transmission of G-PDU sequence numbers' />
+      </params>
+    </command>
+    <command id='no g-pdu tx-sequence-numbers'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='g-pdu' doc='G-PDU Configuration' />
+        <param name='tx-sequence-numbers' doc='Disable transmission of G-PDU sequence numbers' />
+      </params>
+    </command>
   </node>
 </vtydoc>
-- 
cgit v1.2.3