aboutsummaryrefslogtreecommitdiffstats
path: root/ggsn
AgeCommit message (Collapse)AuthorFilesLines
2018-07-19fix support for multiple IPCP in PDP protocol configuration optionsStefan Sperling1-36/+41
Parse multiple IPCP IEs embedded in Protocol Configuration Options, and return IPCP responses for all of them. Makes the associated TTCN3 GGSN test pass. Depends: Ia1410abb216831864042f95679330f4508e1af3d Change-Id: I51ecab4e35f3ee638e68ca773b0da90cc0294ab0 Related: OS#3319
2018-07-19fix unaligned access in build_ipcp_pco()Stefan Sperling1-20/+31
IPCP data can begin at any byte location in the pco_req->v array. Casting to a 'struct ipcp_hdr' pointer could lead to unaligned access. Parse IPCP data with u_int8_t pointers instead to avoid this problem. Add some length checks while here. pco_contains_proto() and ipcp_contains_option() now receive the minimum size of the data the caller is looking for, and only return pointers to items of sufficient size. Also fix an inifinite loop in ipcp_contains_option() by refusing IPCP options with length small than 2. Previously, a zero length option would trigger an infinite loop in the parser. Change-Id: Ia1410abb216831864042f95679330f4508e1af3d Related: OS#3194
2018-06-19ggsn: ctrl iface: listen on IP configured by VTYPau Espin Pedrol1-1/+2
Previosuly, the CTRL iface of osmo-ggsn was always bound to 127.0.0.1 Fixes: OS#3287 Change-Id: I9b2c1b310c7dc94ef09642f7f256ae259b41619d
2018-05-28ggsn: make sure ipcp_option_hdr and and ipcp_hdr are packedPhilipp Maier1-2/+2
struct ipcp_option_hdr and struct ipcp_hdr are not declared as packed explicitly, but they are used to parse memory blobs by casting pointers. Add __attribute__((packed)) to ensure that those structs are stored packed. Change-Id: I14e10bb3ce482347b3f0c4d3a75168a55df15f20 Related: OS#3288
2018-05-28ggsn: fix misinterpreted length field in ipcp_contains_option()Philipp Maier1-1/+1
The abort condition of the while loop in ipcp_contains_option() is accessing ipcp->len directly. Unfortunately this field is an uint16_t which as to be interpreted as little endian value. If it is used without prior conversion the value may appear larger than actually intended and the loop will then not stop at the end of end of the buffer. This can cause unpredictable results when the value given with the parameter enum ipcp_options opt is not found. The loop will then eventually cause a segmentation fauld or is likely to hang as soon as cur_opt->len points to a zero byte in memory. - Make sure that ipcp->len interpreted correctly by accessing it through ntohs() Change-Id: Icffde89f9bc5d8fcadf6e2dd6c0b4de03440edd5 Related: OS#3288
2018-05-09ggsn_vty.c: fix: use CONFIG_NODE as parent by defaultVadim Yanitskiy1-0/+4
There are some configuration nodes, which are handled by extenral libraries, such as libosmoctrl. So, when switching back to the parent node, this should be kept in mind. Change-Id: I65be7910dc46166caa34a0984a6763e1477dec99
2018-04-25ggsn: don't use gtp_kernel_tunnel_{add,del}() for userspace tunHarald Welte1-4/+6
Change-Id: I00cc8eb8c4d44532f975f78783ff4e12814b3416
2018-04-25Move kernel GTP support from ggsn/ to lib/Harald Welte4-306/+74
This way, the IP address / route handling between TUN devices and kernel GTP can be shared, which will provide not only a unified codebase but also a more consistent behavior. This also paves the road for to use kernel GTP from sgsnemu in the future. Related: OS#3214 Change-Id: Ic53a971136edd0d8871fbd6746d7b0090ce3a188
2018-04-25ggsn: Don't explicitly use tun_setaddr() API anymoreHarald Welte1-2/+2
tun_addaddr() internally contains a fallback to tun_setaddr() for the first address, so we can unify the API usage a bit and use tun_addaddr() from all call sites Change-Id: I34de003a1a040254bd38b29e48caea34cb0c88d2
2018-04-25fix segfault in case of kernel gtp-uHarald Welte1-0/+8
There's a problem during the initial start-up of osmo-ggsn in case of kernel gtp-u: apn->ggsn->gsn is not yet set while parsing the 'apn' nodes from the config file. This member is only set after the last 'apn' node has been parsed at the end of the 'ggsn' node. Closes: OS#3217 Change-Id: I022a5e5ebc1f155e8f94938856d310462f79bbe8
2018-04-17use osmo_init_logging2Pau Espin Pedrol1-1/+1
Change-Id: Ic38fff17cc985238b91999c8acdd92d22fd28c72
2018-02-14Add talloc context introspection via VTYHarald Welte1-0/+3
This requires libosmocore with Change-Id I43fc42880b22294d83c565ae600ac65e4f38b30d or later. Change-Id: I460efff3a3dfa2c7d955871aca78b37552a29aff
2018-01-30ggsn.c: cb_tun_ind: Don't drop packets targeting pdp ctx ll addrPau Espin Pedrol1-2/+6
Change-Id: I72602a78baa2a7e3412d8b69c1bf1b3ac0efa434
2018-01-30ggsn.c: cb_tun_ind: log dst addr of packet without pdp ctxPau Espin Pedrol1-1/+4
Change-Id: Ib3a87ec2b2d0014376295028a648750fa3124485
2018-01-30ggsn.c: cb_tun_ind: Convert ifelse to switch statementPau Espin Pedrol1-3/+6
Change-Id: I4fc97f367ae615cdf0a9501f89419990c2fd4599
2018-01-26ggsn: Print all addresses on successful pdp ctx creationPau Espin Pedrol1-3/+11
Change-Id: I0c57df17d91bade127027e03633494adb6f818c5
2018-01-26ggsn: Parse PCO_IPCP for IPv4v6 pdp ctxPau Espin Pedrol1-10/+2
pdp_has_v4 only take into account IPv4 EUAs. Change-Id: I1cf8d6548951e5732075beeea1412d12fb6bdec3
2018-01-26ggsn: Parse PCO_IPCPPau Espin Pedrol1-15/+53
Improvements include: - Use Identifier received from request instead of using hardcoded id=0. - Don't add DNS to response if they were not included in request. Change-Id: Ic8aa5d634e526683b2ad8ed5d14088e171c41c98
2018-01-26ggsn: Validate packet src addr from MSPau Espin Pedrol1-0/+19
Closes: OS#2422 Change-Id: Ie658a7f161103bb6f631ab0508e45e55fb42a442
2018-01-26ggsn: encaps_tun: Avoid forwarding packet if EUA is unassigned, fix crashPau Espin Pedrol3-13/+47
Check (before forwarding received GTP packets into the tun) if the pdp ctx associated with the packet requested was assigned an EUA of the given IP version. This way we avoid for instance forwarding an IPv6 packet (or sending back a response to a Router Solicitation packet) in case the APN was configured without IPv6 support or if the MS/SGSN didn't ask for an IPv6 while requesting an EUA. As a side effect, this commit fixes an OSMO_ASSERT hit introduced in handle_router_mcast in 2d6a69e69a4b4cb2b8cc63c4810dae44e5a4d8f6 due to a deffective MS sending an icmpv6 Router Solicitation over IPv6 after having been requesting and assigned an IPv4 EUA (so no IPv6 packets expected). Before that commit, there was no crash but the message was being wrongly answered and used an uninitialized .v6 addr field from the peer struct. Fixes: OS#2843 Change-Id: Ib6d18a64c2b71f3bcf6cb7e3a978d2d3f9c7a79b
2018-01-16Fix stow-enabled jenkins build failureMax1-2/+2
The error is: CC gtp-kernel.o gtp-kernel.c:19:26: fatal error: libgtpnl/gtp.h: No such file or directory #include <libgtpnl/gtp.h> ^ compilation terminated. Fix it by using proper CFLAGS/LIBS for libgtpnl. Change-Id: I5a24076778ea3ce263ac27211a6f45f935155b33
2017-12-15ggsn_vty.c: Print ipv6 link-local cmd when writing config to filePau Espin Pedrol1-0/+2
Previous commit added the ipv6 link-local vty cmd but forgot to add code to print its value in config_write_apn. Fixes: 37c45e3998fca240b5266abd3ac883d0a35bab50 Change-Id: I08aeaa98d6dc318b7e9740d837ba4ac48cd7051c
2017-12-14ggsn: Add 'ipv6 link-local' vty cmdPau Espin Pedrol3-1/+37
This vty cmd let's you set up a new link-local IP for a specific APN to be used during ICMPv6 Router Advertisement procedure. osmo-ggsn hence requires a link-local IPv6 address to be added to the tun interface, otherwise the apn will not be configured correctly and it won't be able to allocate addresses from the ipv6 pool later on. This feature is useful in case your OS doesn't support autoconfiguring link-local IPs when the interface is brought up (some linux versions are known to fail at this) or in case you configured your OS specifically to avoid automatic set up (sysctl net.ipv6.conf.*.autoconf). If "no ipv6 link-local" is provided (default), osmo-ggsn will rely on the OS or the ipup-script setting up the link-local IP for the tun interface at creation time, then fetching it after ipup-script time and using the first link-local ip found. On the other hand, if the "ipv6 link-local" cmd is provided, osmo-ggsn will add the link-local IP to the interface manually and use that one for later Router Advertisement procedures. Change-Id: I09ef27f54940d4c47150e5f9016d1cd4298c16b5
2017-12-14ggsn.c: Improve logging info on link-local ipv6 addr not foundPau Espin Pedrol1-3/+5
Change-Id: I18fb952514712ff30d18c7626f84309055d3efa1
2017-12-11Add support for IPv4v6 End User AddressesPau Espin Pedrol2-43/+59
Before this commit, when an MS requested an ipv4v6 context osmo-ggsn returned an error stating the type was unknown, and this text was printed in the log: Processing create PDP context request for APN 'ims' Cannot decode EUA from MS/SGSN: f1 8d This patch has been tested with an MS running the 3 types of addresses: - IPv4 and IPv6: no regressions observed, the context is activated and packets are sent to the ggsn. - IPv4v6: Wireshark correctly parses request and reponse, and then ICMPv6 traffic from both sides. Finally I see the MS using the IPv4 and IPv6 DNS addresses advertised and TCP traffic over IPv4 (because probably my IPv6 network setup is not correct). I also checked I can disable/enable data (pdp ctx delete and activate) several times without any issue. Change-Id: Ic820759167fd3bdf329cb11d4b942e903fe50af5
2017-12-05ggsn: Ignore PCO with length 0, don't abort processingHarald Welte1-2/+0
The existing code would abort iterating over the list of PCO TLVs if a TLV of length zero was encountered. However, there's nothing in the spec that would make a zero-length PCO invalid, so we should continue to iterate over any PCO TLVs after the zero-length one. This issue was discovered while writing test cases in osmo-ttcn3-hacks.git Change-Id: I36660566a8ee2ca80ae6ee99c86e167e7c208df2
2017-12-05ggsn.c: Fix byte order of IPCP IPv4 DNS serversHarald Welte1-2/+2
... this probably didn't show up as 8.8.8.8 is dual-endian. doh! The address was already in network byte order, but msgb_put_u32 "of course" expects host byte order, ending up the wrong way in the actual packets :/ Change-Id: Ia4bcac5fcebfc24760432eb66be258a01d78f65f Closes: OS#2685
2017-12-05Log APN and tun names for packetsMax1-3/+4
Change-Id: I6f7ce33f6585b2b78e2b8a5c0f7111f0316d6ddd
2017-12-04ggsn.c: Print version of unhandled ip packetPau Espin Pedrol1-1/+1
Change-Id: I7e226a12b074c96c572f90e3aaf62716d0cd47c5
2017-11-16ggsn_vty: Stop using deprecated API vty_install_defaultPau Espin Pedrol1-2/+1
Changes made as requested by the deprecation text. Fixes warning below: warning: ‘vty_install_default’ is deprecated: Now happens implicitly with install_node() [-Wdeprecat ed-declarations] vty_install_default(GGSN_NODE); ^~~~~~~~~~~~~~~~~~~ Change-Id: I5c6197129e0c251a4e8dd174027b011c8f6476c6
2017-11-14gtp-kernel: Add device nime in pdp_debug() log statementsHarald Welte1-4/+5
Change-Id: Iad0e7a9fa48fcddc31b8d555244581efdbd61b4e
2017-11-14gtp-kernel: Add function name to pdp_debug() function callsHarald Welte1-4/+4
This allows us to distinguish "add" from "del" operatons in the log Change-Id: Ibe2e76a6eecc7b5fa5f44ab2c1578597138e30b9
2017-11-14gtp-kernel: Get rid of SYS_ERR where not applicableHarald Welte1-14/+8
SYS_ERR is for logging an error from the (operating) system including the errno value. For general logging, we have DEBUGP/LOGP. Let's convert the gtp-kernel logging over. This also fixes the related line ending mess-up as SYS_ERR adds a LF while LOGP/DEBUGP don't. Change-Id: Idb4069a28227b770e20d62bf306cd294f47146ae
2017-11-14gtp-kernel: proper cleanup in error pathHarald Welte1-0/+2
When genl_socket_open() succeeds but genl_lookup_family() fails, we have to clean up the socket that we just opened. This requires a new version of libgtpnl :/ Change-Id: I31df046530347f88cb7b16c37a899b456ed1b080
2017-11-14gtp-kernel: Make sure repeated calls to gtp_kernel_init() are safeHarald Welte1-15/+25
We have to factor out the "run once" code and make sure to really only run that once, while the per-device code remains in the gtp_kernel_init() function. Change-Id: Iba5bd71e4b725eef59fe4f233fbb965e396a06c3
2017-11-14gtp-kernel: Avoid global state variableHarald Welte2-23/+0
Whether or not GTP kernel support is enabled is the property of a given APN, and not a global state variable. Change-Id: Iff3bd8a52bd6c20f9811ee41ff700486d08591f3
2017-11-14gtp-kernel: Align logging for APN start in kernel-gtp case with that of TUNHarald Welte1-1/+1
Change-Id: Ie53d37f151e8b6448636a8cde5777b3841989d05
2017-11-14gtp-kernel: shut down kernel GTP device in apn_down()Harald Welte1-0/+1
When we take the APN down, we should also take the GTP device down. Change-Id: Idd250dd454a1603834d388884a24a63e044fdd7b
2017-11-14gtp-kernel: Get rid of hard-coded kernel GTP device nameHarald Welte3-27/+25
The existing kernel GTP support code inherited from OpenGGSN was overly simplistic and didn't support multiple GTP devices or user-defined GTP device names. Let's remove that restriction in this patch Change-Id: I51df223788fd5b7cf8099463b8aa0ca4a4fd1c96
2017-11-13gtp-kernel: Re-add support for kernel GTP-U accelerationHarald Welte1-5/+9
When we branched off osmo-ggsn from the old openggsn code base, the support for kernel-gtp got temporarily removed. This patch re-introduces support for handling the GTP-U plane in the Linux kernel by means of libgtpnl + the kernel GTP-U driver. This only works for IPv4 at the moment, until the kernel GTP-U code gains IPv6 support. Kernel GTP currently also is restricted to a single APN per GSN. Change-Id: Ieb1bc1bd0d51d41947f0abd6ebbc2e5d102592d6
2017-11-13gtp_kernel: Change gtp_kernel_init() function signatureHarald Welte2-7/+16
Rather than taking an explicit in_addr, prefix_length and a string-formatted prefix, let's pass in an in46_prefix and derive the other representations from it. Also, don't refer to a no-longer-existing global 'ipup' variable but add it as a function argument. Change-Id: Ife87142c86589b4fa4062d62afe3670467548589
2017-11-13Properly NULL-out blacklist in alloc_ippool_blacklist()Harald Welte1-4/+8
This ensures that in case of error, any caller can still safely call talloc_free() on the blacklist pointerm as free on NULL is well-defined. With the code prior to this patch we fear a double-free. Change-Id: Idc511cb3f0dfb922920aba8f88ea77df1722ecdc
2017-11-13remove unused argument to alloc_ippool_blacklist()Harald Welte1-3/+3
Change-Id: I4d3ea077ba46446e537ec9a6de6f4080fcaa428c
2017-11-06sgsnemu: Don't leak FILE handle in proc_read()Harald Welte1-34/+10
Change-Id: Ie22e6a9bc172427e867e7a4001b6c710477a232b Fixes: Coverity CID#178660
2017-10-17ippool: Implement and use blacklist instead of blindly using IPPOOL_NOGATEWAYPau Espin Pedrol1-2/+52
Commit dda21ed7d4a897c9284c69175d0da598598eae40 modified previous calls to ippool_new() removing the pass of flags to avoid allocating certain problematic IPs from the pool to MS, such as the network, gateway and broadcast IPs. Today I did some unsucessful tests with osmo-ggsn with a pool "ip prefix dynamic 176.16.222.0/24", and thus IP 176.16.222.0 was being assigned to the MS. De-capsulated DNS packets were received in the tun interface, but the Linux system in there was unable to correctly forward the packets to the gateway interface connected to the Internet. However, adding a second MS which got 176.16.222.1 had its packets forwarded correctly. However, previous implementation relies on flag IPPOOL_NOGATEWAY flag to blindly blacklist first IP after the network ip (ie, .0 and .1 are removed), which limits the IP reserved for the tun device to be .1. If a different IP in the range is assigned, it may cause issues. As a result, a blacklist is introduced in this commit to dynamically fetch the tun IP address and exlucde it from the pool of available IPs. Change-Id: I8e91f7280d60490c858a769dd578c1c8e54e9243
2017-10-16tun: Convert tun_ipv6_linklocal_get to be more genericPau Espin Pedrol1-1/+3
Add support for IPv4 and IPv6 global IPs. Also return the prefix length of the IP address by using a in46_prefix. Change-Id: I277af191dc611b6bbcb83479f4ae338083740322
2017-10-14ggsn: Avoid crash on wrong EUA typeHarald Welte1-0/+28
If the EUA in the Create PDP Context Request was not supported by the given APN (e.g. IPv6 request for a v4-only APN), we crashed. Avoid this and add proper handling of this error case. Change-Id: I8d1f7ec727c5d2d4427232015f81ed57d3440dff
2017-10-13Remove trailing whitespacePau Espin Pedrol1-3/+3
Change-Id: I8e24f95a88bef3a59006a89c219871e6156963d7
2017-10-11create_context_ind(): Fix crash on apn not foundPau Espin Pedrol1-2/+2
Program terminated with signal SIGSEGV, Segmentation fault. 0 create_context_ind (pdp=0xb6b391b0 <pdpa>) at /usr/src/debug/osmo-ggsn/1.0.0+gitrAUTOINC+ab5e160937-r0/git/ggsn/ggsn.c:453 453 if (!apn->started) (gdb) bt 0 create_context_ind (pdp=0xb6b391b0 <pdpa>) at /usr/src/debug/osmo-ggsn/1.0.0+gitrAUTOINC+ab5e160937-r0/git/ggsn/ggsn.c:453 1 0xb6b225e0 in gtp_create_pdp_ind (gsn=gsn@entry=0x74f28, version=version@entry=1, peer=0x0, peer@entry=0xbee6ead4, fd=-1092167056, fd@entry=8, pack=pack@entry=0xbee6eae4, len=len@entry=179) at /usr/src/debug/osmo-ggsn/1.0.0+gitrAUTOINC+ab5e160937-r0/git/gtp/gtp.c:1591 2 0xb6b245e4 in gtp_decaps1c (gsn=0x74f28) at /usr/src/debug/osmo-ggsn/1.0.0+gitrAUTOINC+ab5e160937-r0/git/gtp/gtp.c:2986 3 0x41d770c0 in osmo_select_main () from /usr/lib/libosmocore.so.8 4 0x000121b8 in main (argc=4, argv=0xbee70e54) at /usr/src/debug/osmo-ggsn/1.0.0+gitrAUTOINC+ab5e160937-r0/git/ggsn/ggsn.c:897 Fixes: dd266066c7cc96c797034da352cc9d72177c5780, b16c46b4c36383368eb1581e40d0a8ca751ddc53 Change-Id: Ie4ec74e87aaf1d067dd1717d986673be56c4d6ed
2017-10-01create_context_ind(): ignore a non-started default APNHarald Welte1-0/+5
If the default APN has not been started, it is not eligible to be used in starting of new PDP contexts. Change-Id: I93b5c205c033f275824ee8bc8cdcf1428fb086df
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-24 09:42:10 +0000