diff options
Diffstat (limited to 'doc/manuals')
-rw-r--r-- | doc/manuals/vty/ggsn_vty_reference.xml | 507 |
1 files changed, 116 insertions, 391 deletions
diff --git a/doc/manuals/vty/ggsn_vty_reference.xml b/doc/manuals/vty/ggsn_vty_reference.xml index 696f1f2..76a55c1 100644 --- a/doc/manuals/vty/ggsn_vty_reference.xml +++ b/doc/manuals/vty/ggsn_vty_reference.xml @@ -1,22 +1,44 @@ <vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> - <node id='0'> - </node> - <node id='1'> - <command id='show version'> + <node id='_common_cmds_'> + <name>Common Commands</name> + <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description> + <command id='help'> <params> - <param name='show' doc='Show running system information' /> - <param name='version' doc='Displays program version' /> + <param name='help' doc='Description of the interactive help system' /> </params> </command> - <command id='show online-help'> + <command id='list'> <params> - <param name='show' doc='Show running system information' /> - <param name='online-help' doc='Online help' /> + <param name='list' doc='Print command list' /> </params> </command> - <command id='list'> + <command id='write terminal'> <params> - <param name='list' doc='Print command list' /> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> </params> </command> <command id='exit'> @@ -24,9 +46,24 @@ <param name='exit' doc='Exit current mode and down to previous mode' /> </params> </command> - <command id='help'> + <command id='end'> <params> - <param name='help' doc='Description of the interactive help system' /> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + </node> + <node id='view'> + <name>view</name> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> </params> </command> <command id='enable'> @@ -67,19 +104,19 @@ </command> <command id='logging enable'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='enable' doc='Enables logging to this vty' /> </params> </command> <command id='logging disable'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='disable' doc='Disables logging to this vty' /> </params> </command> <command id='logging filter all (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='filter' doc='Filter log messages' /> <param name='all' doc='Do you want to log all messages?' /> <param name='0' doc='Only print messages matched by other filters' /> @@ -88,7 +125,7 @@ </command> <command id='logging color (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='color' doc='Configure color-printing for log messages' /> <param name='0' doc='Don't use color for printing messages' /> <param name='1' doc='Use color for printing messages' /> @@ -96,7 +133,7 @@ </command> <command id='logging timestamp (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='timestamp' doc='Configure log message timestamping' /> <param name='0' doc='Don't prefix each log message' /> <param name='1' doc='Prefix each log message with current timestamp' /> @@ -104,7 +141,7 @@ </command> <command id='logging print extended-timestamp (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='print' doc='Log output settings' /> <param name='extended-timestamp' doc='Configure log message timestamping' /> <param name='0' doc='Don't prefix each log message' /> @@ -113,7 +150,7 @@ </command> <command id='logging print category (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='print' doc='Log output settings' /> <param name='category' doc='Configure log message' /> <param name='0' doc='Don't prefix each log message' /> @@ -122,23 +159,23 @@ </command> <command id='logging set-log-mask MASK'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='set-log-mask' doc='Set the logmask of this logging target' /> - <param name='MASK' doc='The logmask to use' /> + <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> </params> </command> <command id='logging set log mask MASK'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='set' doc='Decide which categories to output.' /> <param name='log' doc='Log commands' /> <param name='mask' doc='Mask commands' /> - <param name='MASK' doc='The logmask to use' /> + <param name='MASK' doc=''set log mask' is deprecated, please refer to the docs of 'set-log-mask' instead' /> </params> </command> <command id='logging level (all|ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='level' doc='Set the log level for a specified category' /> <param name='all' doc='Global setting for all subsystems' /> <param name='ip' doc='IP Pool and other groups' /> @@ -234,53 +271,8 @@ </params> </command> </node> - <node id='2'> - </node> - <node id='3'> - <command id='help'> - <params> - <param name='help' doc='Description of the interactive help system' /> - </params> - </command> - <command id='list'> - <params> - <param name='list' doc='Print command list' /> - </params> - </command> - <command id='write terminal'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='terminal' doc='Write to terminal' /> - </params> - </command> - <command id='write file'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='file' doc='Write to configuration file' /> - </params> - </command> - <command id='write memory'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='memory' doc='Write configuration to the file (same as write file)' /> - </params> - </command> - <command id='write'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - </params> - </command> - <command id='show running-config'> - <params> - <param name='show' doc='Show running system information' /> - <param name='running-config' doc='running configuration' /> - </params> - </command> - <command id='exit'> - <params> - <param name='exit' doc='Exit current mode and down to previous mode' /> - </params> - </command> + <node id='enable'> + <name>enable</name> <command id='disable'> <params> <param name='disable' doc='Turn off privileged mode command' /> @@ -363,19 +355,19 @@ </command> <command id='logging enable'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='enable' doc='Enables logging to this vty' /> </params> </command> <command id='logging disable'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='disable' doc='Disables logging to this vty' /> </params> </command> <command id='logging filter all (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='filter' doc='Filter log messages' /> <param name='all' doc='Do you want to log all messages?' /> <param name='0' doc='Only print messages matched by other filters' /> @@ -384,7 +376,7 @@ </command> <command id='logging color (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='color' doc='Configure color-printing for log messages' /> <param name='0' doc='Don't use color for printing messages' /> <param name='1' doc='Use color for printing messages' /> @@ -392,7 +384,7 @@ </command> <command id='logging timestamp (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='timestamp' doc='Configure log message timestamping' /> <param name='0' doc='Don't prefix each log message' /> <param name='1' doc='Prefix each log message with current timestamp' /> @@ -400,7 +392,7 @@ </command> <command id='logging print extended-timestamp (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='print' doc='Log output settings' /> <param name='extended-timestamp' doc='Configure log message timestamping' /> <param name='0' doc='Don't prefix each log message' /> @@ -409,7 +401,7 @@ </command> <command id='logging print category (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='print' doc='Log output settings' /> <param name='category' doc='Configure log message' /> <param name='0' doc='Don't prefix each log message' /> @@ -418,23 +410,23 @@ </command> <command id='logging set-log-mask MASK'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='set-log-mask' doc='Set the logmask of this logging target' /> - <param name='MASK' doc='The logmask to use' /> + <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> </params> </command> <command id='logging set log mask MASK'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='set' doc='Decide which categories to output.' /> <param name='log' doc='Log commands' /> <param name='mask' doc='Mask commands' /> - <param name='MASK' doc='The logmask to use' /> + <param name='MASK' doc=''set log mask' is deprecated, please refer to the docs of 'set-log-mask' instead' /> </params> </command> <command id='logging level (all|ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='level' doc='Set the log level for a specified category' /> <param name='all' doc='Global setting for all subsystems' /> <param name='ip' doc='IP Pool and other groups' /> @@ -530,56 +522,8 @@ </params> </command> </node> - <node id='4'> - <command id='help'> - <params> - <param name='help' doc='Description of the interactive help system' /> - </params> - </command> - <command id='list'> - <params> - <param name='list' doc='Print command list' /> - </params> - </command> - <command id='write terminal'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='terminal' doc='Write to terminal' /> - </params> - </command> - <command id='write file'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='file' doc='Write to configuration file' /> - </params> - </command> - <command id='write memory'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='memory' doc='Write configuration to the file (same as write file)' /> - </params> - </command> - <command id='write'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - </params> - </command> - <command id='show running-config'> - <params> - <param name='show' doc='Show running system information' /> - <param name='running-config' doc='running configuration' /> - </params> - </command> - <command id='exit'> - <params> - <param name='exit' doc='Exit current mode and down to previous mode' /> - </params> - </command> - <command id='end'> - <params> - <param name='end' doc='End current mode and change to enable mode.' /> - </params> - </command> + <node id='config'> + <name>config</name> <command id='hostname WORD'> <params> <param name='hostname' doc='Set system's network name' /> @@ -827,59 +771,11 @@ </params> </command> </node> - <node id='7'> - <command id='help'> - <params> - <param name='help' doc='Description of the interactive help system' /> - </params> - </command> - <command id='list'> - <params> - <param name='list' doc='Print command list' /> - </params> - </command> - <command id='write terminal'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='terminal' doc='Write to terminal' /> - </params> - </command> - <command id='write file'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='file' doc='Write to configuration file' /> - </params> - </command> - <command id='write memory'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='memory' doc='Write configuration to the file (same as write file)' /> - </params> - </command> - <command id='write'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - </params> - </command> - <command id='show running-config'> - <params> - <param name='show' doc='Show running system information' /> - <param name='running-config' doc='running configuration' /> - </params> - </command> - <command id='exit'> - <params> - <param name='exit' doc='Exit current mode and down to previous mode' /> - </params> - </command> - <command id='end'> - <params> - <param name='end' doc='End current mode and change to enable mode.' /> - </params> - </command> + <node id='config-log'> + <name>config-log</name> <command id='logging filter all (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='filter' doc='Filter log messages' /> <param name='all' doc='Do you want to log all messages?' /> <param name='0' doc='Only print messages matched by other filters' /> @@ -888,7 +784,7 @@ </command> <command id='logging color (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='color' doc='Configure color-printing for log messages' /> <param name='0' doc='Don't use color for printing messages' /> <param name='1' doc='Use color for printing messages' /> @@ -896,7 +792,7 @@ </command> <command id='logging timestamp (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='timestamp' doc='Configure log message timestamping' /> <param name='0' doc='Don't prefix each log message' /> <param name='1' doc='Prefix each log message with current timestamp' /> @@ -904,7 +800,7 @@ </command> <command id='logging print extended-timestamp (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='print' doc='Log output settings' /> <param name='extended-timestamp' doc='Configure log message timestamping' /> <param name='0' doc='Don't prefix each log message' /> @@ -913,16 +809,23 @@ </command> <command id='logging print category (0|1)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='print' doc='Log output settings' /> <param name='category' doc='Configure log message' /> <param name='0' doc='Don't prefix each log message' /> <param name='1' doc='Prefix each log message with category/subsystem name' /> </params> </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> + </params> + </command> <command id='logging level (all|ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> <params> - <param name='logging' doc='Configure log message to this terminal' /> + <param name='logging' doc='Configure logging' /> <param name='level' doc='Set the log level for a specified category' /> <param name='all' doc='Global setting for all subsystems' /> <param name='ip' doc='IP Pool and other groups' /> @@ -956,56 +859,8 @@ </params> </command> </node> - <node id='8'> - <command id='help'> - <params> - <param name='help' doc='Description of the interactive help system' /> - </params> - </command> - <command id='list'> - <params> - <param name='list' doc='Print command list' /> - </params> - </command> - <command id='write terminal'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='terminal' doc='Write to terminal' /> - </params> - </command> - <command id='write file'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='file' doc='Write to configuration file' /> - </params> - </command> - <command id='write memory'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='memory' doc='Write configuration to the file (same as write file)' /> - </params> - </command> - <command id='write'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - </params> - </command> - <command id='show running-config'> - <params> - <param name='show' doc='Show running system information' /> - <param name='running-config' doc='running configuration' /> - </params> - </command> - <command id='exit'> - <params> - <param name='exit' doc='Exit current mode and down to previous mode' /> - </params> - </command> - <command id='end'> - <params> - <param name='end' doc='End current mode and change to enable mode.' /> - </params> - </command> + <node id='config-stats'> + <name>config-stats</name> <command id='local-ip ADDR'> <params> <param name='local-ip' doc='Set the IP address to which we bind locally' /> @@ -1073,56 +928,8 @@ </params> </command> </node> - <node id='9'> - <command id='help'> - <params> - <param name='help' doc='Description of the interactive help system' /> - </params> - </command> - <command id='list'> - <params> - <param name='list' doc='Print command list' /> - </params> - </command> - <command id='write terminal'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='terminal' doc='Write to terminal' /> - </params> - </command> - <command id='write file'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='file' doc='Write to configuration file' /> - </params> - </command> - <command id='write memory'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='memory' doc='Write configuration to the file (same as write file)' /> - </params> - </command> - <command id='write'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - </params> - </command> - <command id='show running-config'> - <params> - <param name='show' doc='Show running system information' /> - <param name='running-config' doc='running configuration' /> - </params> - </command> - <command id='exit'> - <params> - <param name='exit' doc='Exit current mode and down to previous mode' /> - </params> - </command> - <command id='end'> - <params> - <param name='end' doc='End current mode and change to enable mode.' /> - </params> - </command> + <node id='config-line'> + <name>config-line</name> <command id='login'> <params> <param name='login' doc='Enable password checking' /> @@ -1141,7 +948,8 @@ </params> </command> </node> - <node id='14'> + <node id='config-ctrl'> + <name>config-ctrl</name> <command id='bind A.B.C.D'> <params> <param name='bind' doc='Set bind address to listen for Control connections' /> @@ -1149,56 +957,8 @@ </params> </command> </node> - <node id='26'> - <command id='help'> - <params> - <param name='help' doc='Description of the interactive help system' /> - </params> - </command> - <command id='list'> - <params> - <param name='list' doc='Print command list' /> - </params> - </command> - <command id='write terminal'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='terminal' doc='Write to terminal' /> - </params> - </command> - <command id='write file'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='file' doc='Write to configuration file' /> - </params> - </command> - <command id='write memory'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='memory' doc='Write configuration to the file (same as write file)' /> - </params> - </command> - <command id='write'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - </params> - </command> - <command id='show running-config'> - <params> - <param name='show' doc='Show running system information' /> - <param name='running-config' doc='running configuration' /> - </params> - </command> - <command id='exit'> - <params> - <param name='exit' doc='Exit current mode and down to previous mode' /> - </params> - </command> - <command id='end'> - <params> - <param name='end' doc='End current mode and change to enable mode.' /> - </params> - </command> + <node id='config-ggsn'> + <name>config-ggsn</name> <command id='description .TEXT'> <params> <param name='description' doc='Save human-readable description of the object' /> @@ -1278,56 +1038,8 @@ </params> </command> </node> - <node id='27'> - <command id='help'> - <params> - <param name='help' doc='Description of the interactive help system' /> - </params> - </command> - <command id='list'> - <params> - <param name='list' doc='Print command list' /> - </params> - </command> - <command id='write terminal'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='terminal' doc='Write to terminal' /> - </params> - </command> - <command id='write file'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='file' doc='Write to configuration file' /> - </params> - </command> - <command id='write memory'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='memory' doc='Write configuration to the file (same as write file)' /> - </params> - </command> - <command id='write'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - </params> - </command> - <command id='show running-config'> - <params> - <param name='show' doc='Show running system information' /> - <param name='running-config' doc='running configuration' /> - </params> - </command> - <command id='exit'> - <params> - <param name='exit' doc='Exit current mode and down to previous mode' /> - </params> - </command> - <command id='end'> - <params> - <param name='end' doc='End current mode and change to enable mode.' /> - </params> - </command> + <node id='config-ggsn-apn'> + <name>config-ggsn-apn</name> <command id='description .TEXT'> <params> <param name='description' doc='Save human-readable description of the object' /> @@ -1476,5 +1188,18 @@ <param name='ifconfig' doc='GGSN-based interface configuration' /> </params> </command> + <command id='g-pdu tx-sequence-numbers'> + <params> + <param name='g-pdu' doc='G-PDU Configuration' /> + <param name='tx-sequence-numbers' doc='Enable transmission of G-PDU sequence numbers' /> + </params> + </command> + <command id='no g-pdu tx-sequence-numbers'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='g-pdu' doc='G-PDU Configuration' /> + <param name='tx-sequence-numbers' doc='Disable transmission of G-PDU sequence numbers' /> + </params> + </command> </node> </vtydoc> |