Move examples to doc/examples and include them in DIST

Change-Id: I0846e21ac63774939934ab629c6d7212269be9a6

4 files changed, 0 insertions, 347 deletions

diff --git a/examples/firewall b/examples/firewall
deleted file mode 100755
index fce735a..0000000
--- a/examples/firewall
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# Firewall script for GGSN
-#
-# Uses $IFGN (eth0) as the Gn interface (Gn) and
-# $IFGI (eth1) as the Gi interface.
-#
-# SUMMARY
-# * All connections originating from GGSN are allowed.
-# * Incoming ssh, GTPv0 and GTPv1 is allowed on the Gn interface.
-# * Incoming ssh is allowed on the Gi interface.
-# * Forwarding is allowed to and from the Gi interface, but disallowed
-#   to and from the Gn interface.
-# * Masquerede on Gi interface.
-
-IPTABLES="/sbin/iptables"
-IFGN="eth0"
-IFGI="eth1"
-
-$IPTABLES -P INPUT DROP
-$IPTABLES -P FORWARD ACCEPT
-$IPTABLES -P OUTPUT ACCEPT
-
-#Allow related and established on all interfaces (input)
-$IPTABLES -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-
-#Allow releated, established, GTP and ssh on $IFGN. Reject everything else.
-$IPTABLES -A INPUT -i $IFGN -p tcp -m tcp --dport 22 --syn -j ACCEPT
-$IPTABLES -A INPUT -i $IFGN -p udp -m udp --dport 2123 -j ACCEPT
-$IPTABLES -A INPUT -i $IFGN -p udp -m udp --dport 2152 -j ACCEPT
-$IPTABLES -A INPUT -i $IFGN -p udp -m udp --dport 3386 -j ACCEPT
-$IPTABLES -A INPUT -i $IFGN -j REJECT
-
-#Allow related, established and ssh. Drop everything else.
-$IPTABLES -A INPUT -i $IFGI -p tcp -m tcp --dport 22 --syn -j ACCEPT
-$IPTABLES -A INPUT -i $IFGI -j DROP
-
-# Masquerade everything going out on $IFGI
-$IPTABLES -t nat -A POSTROUTING -o $IFGI -j MASQUERADE
-
-#Allow everything on loopback interface.
-$IPTABLES -A INPUT -i lo -j ACCEPT
-
-# Drop everything to and from $IFGN (forward)
-$IPTABLES -A FORWARD -i $IFGN -j DROP
-$IPTABLES -A FORWARD -o $IFGN -j DROP
-
-
diff --git a/examples/osmo-ggsn.cfg b/examples/osmo-ggsn.cfg
deleted file mode 100644
index 763e561..0000000
--- a/examples/osmo-ggsn.cfg
+++ /dev/null
@@ -1,71 +0,0 @@
-!
-! OpenGGSN (0.94.1-adac) configuration saved from vty
-!!
-!
-log stderr
-  logging filter all 1
-  logging color 1
-  logging print category 0
-  logging timestamp 0
-  logging level ip info
-  logging level tun info
-  logging level ggsn info
-  logging level sgsn notice
-  logging level icmp6 notice
-  logging level lglobal notice
-  logging level llapd notice
-  logging level linp notice
-  logging level lmux notice
-  logging level lmi notice
-  logging level lmib notice
-  logging level lsms notice
-  logging level lctrl notice
-  logging level lgtp info
-  logging level lstats notice
-  logging level lgsup notice
-  logging level loap notice
-  logging level lss7 notice
-  logging level lsccp notice
-  logging level lsua notice
-  logging level lm3ua notice
-  logging level lmgcp notice
-!
-stats interval 5
-!
-line vty
- no login
-!
-ggsn ggsn0
- gtp state-dir /tmp
- gtp bind-ip 127.0.0.6
- apn internet
-  gtpu-mode tun
-  tun-device tun4
-  type-support v4
-  ip prefix dynamic 176.16.222.0/24
-  ip dns 0 192.168.100.1
-  ip dns 1 8.8.8.8
-  ip ifconfig 176.16.222.0/24
-  no shutdown
- apn inet6
-  gtpu-mode tun
-  tun-device tun6
-  type-support v6
-  ipv6 prefix dynamic 2001:780:44:2000:0:0:0:0/56
-  ipv6 dns 0 2001:4860:4860::8888
-  ipv6 ifconfig 2001:780:44:2000:0:0:0:0/56
-  no shutdown
- apn inet46
-  gtpu-mode tun
-  tun-device tun46
-  type-support v4v6
-  ip prefix dynamic 176.16.46.0/24
-  ip dns 0 192.168.100.1
-  ip dns 1 8.8.8.8
-  ip ifconfig 176.16.46.0/24
-  ipv6 prefix dynamic 2001:780:44:2100:0:0:0:0/56
-  ipv6 dns 0 2001:4860:4860::8888
-  ipv6 ifconfig 2001:780:44:2100:0:0:0:0/56
-  no shutdown
- default-apn internet
- no shutdown ggsn
diff --git a/examples/osmo-ggsn.init b/examples/osmo-ggsn.init
deleted file mode 100644
index 2deb378..0000000
--- a/examples/osmo-ggsn.init
+++ /dev/null
@@ -1,97 +0,0 @@
-#!/bin/sh
-#
-# osmo-ggsn     This shell script takes care of starting and stopping
-#               osmo-ggsn.
-#
-# chkconfig: - 65 35
-# description: osmo-ggsn is a Gateway GPRS Support Node.
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-# Source networking configuration.
-. /etc/sysconfig/network
-
-if [ -f /etc/sysconfig/osmo-ggsn ]; then
-        . /etc/sysconfig/osmo-ggsn
-fi
-
-# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
-[ -f /usr/bin/osmo-ggsn ] || exit 0
-[ -f /etc/osmo-ggsn.cfg ] || exit 0
-
-RETVAL=0
-prog="osmo-ggsn"
-
-start() {
-	# Start daemons.
-	echo -n $"Starting $prog: "
-
-	# Load tun module
-	/sbin/modprobe tun >/dev/null 2>&1
-
-	# Enable routing of packets: WARNING!!!
-	# Users should enable this explicitly
-	# echo 1 > /proc/sys/net/ipv4/ip_forward
-
-	# Check for runtime directory of nonvolatile data
-	if [ ! -d  /var/lib/osmo-ggsn ]; then
-	  mkdir /var/lib/osmo-ggsn
-	fi
-
-	# Check for GTP restart counter
-	if [ ! -d  /var/lib/osmo-ggsn/gsn_restart ]; then
-	  echo 0 > /var/lib/osmo-ggsn/gsn_restart
-	fi
-
-
-	daemon /usr/bin/osmo-ggsn 
-	RETVAL=$?
-	echo
-	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/osmo-ggsn
-	return $RETVAL
-}
-
-stop() {
-	# Stop daemons.
-	echo -n $"Shutting down $prog: "
-	killproc osmo-ggsn
-	RETVAL=$?
-	echo
-	[ $RETVAL = 0 ] && rm -f /var/lock/subsys/osmo-ggsn /var/run/osmo-ggsn.pid
-	return $RETVAL
-}
-
-# See how we were called.
-case "$1" in
-  start)
-	start
-	;;
-  stop)
-	stop
-	;;
-  restart|reload)
-	stop
-	start
-	RETVAL=$?
-	;;
-  condrestart)
-	if [ -f /var/lock/subsys/osmo-ggsn ] ; then
-	    stop
-	    start
-	    RETVAL=$?
-	fi
-	;;
-  status)
-	status osmo-ggsn
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|condrestart|status}"
-	exit 1
-esac
-
-exit $RETVAL
-
diff --git a/examples/sgsnemu.conf b/examples/sgsnemu.conf
deleted file mode 100644
index 43b2458..0000000
--- a/examples/sgsnemu.conf
+++ /dev/null
@@ -1,131 +0,0 @@
-##############################################################################
-#
-# Sample sgsnemu configuration file
-#
-##############################################################################
-
-# TAG: debug
-# Include this flag to include debug information.
-#debug
-
-
-# TAG: conf
-# Configuration file to use. This file is the configuration file, 
-# so changing this parameter in the configuration file does not make
-# sense. Use it on the command line instead.
-
-# TAG: pidfile
-# File to store information about the pricess id of the program.
-# The program must have write access to this file/directory.
-#pidfile ./sgsnemu.pid
-
-# TAG: statedir
-# Directory to use for nonvolatile storage. 
-# The program must have write access to this directory.
-#statedir ./
-
-
-# TAG: dns
-# DNS server to use for ns lookups.
-# If this tag is not set the system default DNS will be used.
-#dns 10.1.2.3
-
-# TAG: listen
-# Specifies the local IP address to listen to
-#listen 10.0.0.217
-
-# TAG: remote
-# Specifies the remote IP address to connect to
-# If DNS is setup correctly it should be possible to specify the 
-# access point name (APN) as the remote address.
-#remote 10.0.0.240
-
-
-# TAG: contexts
-# Number of contexts to establish from the emulator to the ggsn.
-# Set this tag to zero to not establish any contexts.
-#contexts 1
-
-# TAG: timelimit
-# Disconnect contexts after timelimit seconds, and exit the program.
-# Setting timelimit to zero will cause the program not to disconnect.
-#timelimit 0
-
-
-# TAG: apn
-# Access point name to connect to when run in client mode.
-#apn internet
-
-# TAG: selmode
-# Selection mode to use when connecting to GGSN.
-#selmode 0x01
-
-# TAG: imsi
-# IMSI number used when run in client mode.
-#imsi 2400101234567890
-
-# TAG: msisdn
-# MSISDN number used when run in client mode.
-#msisdn 46702123456
-
-# TAG: qos
-# Requested Quality of Service used when run in client mode.
-# 3 bytes corresponding to ????
-#qos 0x0b921f
-
-# TAG: uid
-# User ID used when run in client mode.
-#uid mig
-
-# TAG: pwd
-# Password used when run in client mode.
-#pwd hemlig
-
-
-# TAG: createif
-# Use this flag if you want to set up a local network interface after
-# a PDP context has been established.
-#createif
-
-# TAG: defaultroute
-# Use this flag if you want to add a default route after a network interface
-# had been established.
-#defaultroute
-
-# TAG: ipup
-# Script executed after network interface has been brought up.
-# Executed with the following parameters: <devicename> <ip address>
-#ipup /etc/sgsnemu/ip-up
-
-# TAG: ipdown
-# Script executed after network interface has been taken down.
-# Executed with the following parameters: <devicename> <ip address>
-#ipdown /etc/sgsnemu/ip-down
-
-
-# TAG: pinghost
-# Ping a remote host through a PDP context by using ICMP echo messages.
-# If more than one PDP context has been established the ICMP messages will
-# be distributed between all available contexts.
-#pinghost 192.168.0.0
-
-# TAG: pingrate
-# Number of ping messages to send off each second.
-#pingrate 1
-
-# TAG: pingsize
-# Size of ICMP echo message payload. Add 28 to get the full IP packet size.
-#pingsize 56
-
-# TAG: pingcount
-# Number of ping messages to send off.
-#pingcount 0
-
-# TAG: pingquiet
-# Do not print ping packet info.
-#pingquiet
-
-
-
-
-