Age | Commit message (Collapse) | Author | Files | Lines |
|
We have licensed the code under GNU Afffero Public License,
and state that in the first paragraph as well as in the link
to the license. However, a paragraph in the middle stated
"see the GNU General Public License", which is somewhat misleading.
Let's fix that.
Change-Id: I37e503b195fe43e1da42c080900504ca8e682e76
|
|
Change-Id: I88c6c6af18be054bd152832e60c8afbbd16098a3
Depends: libosmocore.git Ia4208e10d61843dd6ae77398f6624c918dc81ea4
Depends: libosmocore.git I85316af9b57e8113077305798cb2d82a24e48e00
|
|
This tells the BSC that osmo-bts-sysmo supports VBS/VGCS
Change-Id: I1625d2a0f4905437fad0b5220a551f81eba9a00e
Related: OS#4851
|
|
The new vty option "rtp hr-format (rfc5993|ts101318)" selects the
RTP output format to be used for HR1 codec, consistently across
all models. The default is set to match legacy behavior: ts101318
on osmo-bts-{lc15,oc2g,sysmo} and rfc5993 on osmo-bts-trx.
On models where no legacy behavior is applicable, the default is
set to rfc5993 as a forward-looking measure - see OS#6036.
Closes: OS#5688
Change-Id: I168191874a062429a57904511a1e89e3f588732e
|
|
I did not realize with my previous patch that there's a common place
where features available for all backends should be enabled. So move it
there.
Related: SYS#5922, OS#5538
Change-Id: Id688ddae5cd714355fcc5324f33c9397fecae261
|
|
According to osmo-bsc I0e80ca5afc06737273b6699bde6e325e454b57f6, the
PAGING_COORDINATION feature should be well supported in osmo-bts. Adjust
the bts_model_init functions to report this to the BSC, so it properly
sets this in SI13 and so we can avoid this notice in the log:
Get Attributes Response: reported feature 'PAGING_COORDINATION' is not supported, while we thought it is.
Related: SYS#5922, OS#5538
Change-Id: Ib06829501f4221a7f7b0344ec7991ceba74e7641
|
|
Make it easier to compare the lists of features.
Related: SYS#5922, OS#5538
Change-Id: I67887d89912d963fbbe90590c8467cbbd2566e09
|
|
lower layer specific APIs require first to enable the TRX object
(GsmL1_PrimId_MphInitReq, which requires ARFCN received during Set
Radio Carrier Attributes) before enabling the per-TS structure.
Hence, OPSTART must happen in RCARRIER MO before OPSTART can be sent to
the Radio Channel MOs, otherwise the initialization of the TS objet will
fail and OPSTART for the RadioChannel MO will send back a NACK.
In order to avoid this, we need to keep the RadioChannel MO announced as
"Disabled Dependency" until RCARRIER is OPSTARTed.
Related: OS#5157
Change-Id: I8c6e5ff98c32a3cd5006f5e5ed6875bcabb1d85f
|
|
Now bts_model_vty_init() must be called only once, otherwise the
process would crash when bts_model_init() is called from main().
Change-Id: I262c39896b5db86c54ad9aa7042c7ca6657815d9
Related: SYS#4937, OS#3036
|
|
Change-Id: I9646a45d61153499ad3d580a03d930ed20e23cda
|
|
Otherwise it's hard to fit new options with long names.
Change-Id: If9a418545abff6d22602ba07cfd4447f5ace7742
Related: SYS#4910
|
|
We originally wanted to intrdouce an OML router which would permit
external proceses to implement certain OML MOs. However, that code
was never completed, and all the existing implementation (in three
copies) does is to create a unix domain socket and discard what
is received there.
Change-Id: I7fcbbd5d6b64ddc666ca836dc49abb430be0d5cb
|
|
It was a very bad idea to mix "public" BTS features, that are
reported to the BSC via OML, and those features, that are used
locally (and exclusively) in osmo-bts.
Why? At least because we already have the BTS feature manipulation
API in libosmocore, that is used by osmo-bsc, but for some reason
not by osmo-bts. New features added to libosmocore would clash
with the existing "internal" ones like BTS_FEAT_MS_PWR_CTRL_DSP.
So what this change does can be described as follows:
- remove duplicate definition of the "public" features,
- use libosmocore's API for the "public" features,
- separate both "internal" and "public" features:
- the "public" features continue to live in bitvec,
- the "internal" features become flags,
- s/BTS_FEAT/BTS_INTERNAL_FLAG/g.
Change-Id: Icf792d02323bb73e3b8d46384c7890cb1eb4731e
|
|
For osmo-bts-sysmo the MPH INFO MEAS IND indication is still sent
separately. Lets merge the measurement information into the PH DATA
Change-Id: Iffe7865727fbf9bca8eb32a96e8ea05cf718a948
Related: OS#2977
|
|
It indicates whether BTS model supports managing an MS Power Control
Loop over HW/DSP instead of using the software based osmocom algorithm
present in osmo-bts.
osmo-bts-trx own loop implementation is considered to be a "DSP/HW" one
since it acts on lower layers and interferes with osmocom algorithm
since it controls the same end variable "lchan->ms_power_ctrl.current",
this way we make sure both aren't enabled at the same time.
Old behavior in kept: if common upper-layer algo is not enabled
explicitly in VTY (ms-power-control osmo) and bts-trx specific lower
layer algo is neither enabled (osmotrx ms-power-loop <xyz>), then no
power control is done at all.
Related: OS#1851
Change-Id: I49706926b1e962b18791174627bc3cc0cd0cd9d5
|
|
It seems osmo-bts-sysmo does support CBCH (Cell Broadcast), but
for some reason it doesn't report BTS_FEAT_CBCH to the BSC.
Change-Id: I42dd3f84c44c210d9255e17153372bf252f897a1
|
|
No need to pass -t num_trx anymore to specify number of TRX to use. It
is calculated based on dynamic allocation from VTY config.
Using parameter -t is flagged as deprecated and is transformed into a
NOOP por backward compatibility.
As a result, TRX now are allocated after the BTS is allocated and
initial config (pre-VTY) is applied.
A new function bts_trx_init() is added, to set default config on each
TRX during allocation and before setting VTY config on it.
A new per BTS model function bts_model_trx_init() is added, to allow
per model specific default configuration of each TRX.
Change-Id: Iab1a754ab12a626759f9f90aa66f87bdce65ac9c
|
|
gsm_bts_role_bts was introduced at a time when we still shared
gsm_data_shared.[ch] between BSC and BTS, and where we then subsequently
needed a BTS-private structure. Since that sharing was abandoned quite
some time ago, we can merge gsm_bts_role_bts into gsm_bts and do away
with the bts/btsb dualism in a lot of the code.
Change-Id: I4fdd601ea873d9697f89a748cc77bcf7c978fa3e
|
|
osmo-bts has a table of pchan/channel mode combinations for every
bts. This table models the codec capabilitys of the BTS hardware.
However, having the speech codec apabilities modeled inside the
BTS feature list would be much more comfortable and since the
feature list is communicated back to the BSC we would get the
codec capabilities inside the BSC domain as well.
- remove the pchan/channel mode tables
- set speech codec variants for each BTS type
- fix bts_supports_cm so that it queries the feature list
Change-Id: I977dc729ba856631245aedf76afd48eac92166f7
|
|
Most of the BTS models do not or do register not all of thier
features to the the feature list.
- Update/extend the feature lists for all BTS-Models
Change-Id: I26765a64153368016921c2ac115b1c4aec9bc5e4
|
|
When the BSC sends a MODE MODIFY request with an unsupported
codec, the BTS must respond with a negative acknowledge.
Currently the codec parameter is not checked at all, which may
lead into malfunction or crash of the BTS.
- Introduce a mechanism to check the codec/rate against a
table that is set up in the phy specific code.
- Add tables with supported codec/rate combinations for
octphy, sysmobts, and trx.
Change-Id: Id9b222b7ab19ece90591718bc562b3a8c5e02023
Related: SYS#3212
|
|
The dsp-trace-flags command line argument was removed
in 9684099ae905e6e61cbc326035d0b37c480f6172
Change-Id: I8dbcdc7080ca3f7d7968aeef24422faa75d925fe
|
|
Set (possibly incomplete) list of BTS model-specific features and report
them in response to attribute request via OML.
Change-Id: I5f8a6681c3562ec261441e84dde6e085b516d92f
Related: OS#1614
|
|
This will allow proper BTS attribute reporting via OML in follow-up
patches.
Change-Id: I1c49d6c39fb4dac7a46ee25ceacf4c6ef0f0b736
Related: OS#1614
|
|
|
|
At the time the phy link / phy instance level VTY configuration
commands are parsed, we did not yet call l1if_open() and thus
pinst->u.{lc15,sysmobts}.hdl == NULL.
PHY or PHY instance specific configuration must thus be stored inside
the phy_link or phy_instance itself, and not inside the (not yet
existing) handle.
We solve this by moving around some parameters:
* clk_use_eeprom/clk_cal/clk_src/calib_path get replicated in
phy_instance
* min_qual_{rach,norm} are moved into the generic part (which means
that osmo-bts-octphy and osmo-bts-trx should also implement them)
|
|
Due to the changes introduced by the phy_link API, it's not easy to set
the default DSP trace flags via a command line argument anymore. We now
rather introduce a persitent VTY configuration command, by which the
default DSP tracing configuration can be set (for each PHY).
The persistent trace flags are stored in the phy_instance, while the
current operational run-time flags are in fl1h->phy_instance.
|
|
|
|
|
|
This removes a lot of copy+paste duplication between different BTS
models.
|
|
This is one step in making the main() functions of different
BTS models more similar, so we can share one code rather than multiple
copies of it.
|
|
|
|
by using a talloc pool, we avoid having to go back to the libc
malloc pool all the time. The msgb allocations and libortp allocations
happen quite frequently during processing and show up as one of the
high priority items in osmo-bts profiles on sysmoBTS with 14 concurrent
TCH/H calls (highest load scenario).
talloc still consumes significant CPU, this is mostly due to the
zero-initialization of all the associated buffers. Strictly speaking
we shouldn't need this, but any change there would require lots of
testing, as there might be hidden assumptions in the code?
In some percentage of cases, talloc still seems to fall back on malloc
for msgb allocations, which is currently a bit of a mystery. The pools
certainly are large enough, talloc_reprt() rarely reports more than a
few tens of kilobytes used by the msgb pool.
|
|
|
|
Instead of limiting the number of TRX at VTY to the actual number of
supported TRX, VTY allows to configure any possible number of TRX. If a
TRX is configured, which is not supported by BTS model, an error message is
returned, which states that the given TRX is not supported.
|
|
|
|
sysmocom-bts model shuts down on link loss, but other models may not want
this, so shutdown is moved tor bts_model_abis_close of osmo-bts-sysmo.
|
|
|
|
|
|
|
|
We do not need to have these variables anymore. Just remove them.
|
|
The service file will prevent a re-launch of the sysmobts.service
in case the main process exits with '1'. In case the ethernet is
not available yet the routine would fail and the sysmobts process
will not be restarted.
unable to connect/bind socket: Network is unreachable
<000f> input/ipaccess.c:885 cannot open OML BTS link: Network is unreachable
unable to connect to BSC
root@sysmobts-v2:~# echo $?
2
Fixes: SYS#736
|
|
This sysmobts specific control interface allows for clock calibration
from an external program by means of the "trx.0.clock-info" and
"trx.0.clock-correction" values.
|
|
|
|
|
|
... which is now defined in libosmocore
|
|
Using this control interface, an external program can request
attentuation of the transmitter for thermal management reasons. The
external application doesn't have to know anthing about the actual
transmit power, but it can just configure a certian value of milli-dB
(1/10000 bel) and update (increase/decrease) that value depending on
the thermal environment.
|
|
In order to support transmit power reduction by thermal management
as well as the variety of new internal / external PA configurations
of BTSs, we need a slightly more complex system.
Also, as at high power a single dB can be quite a big difference,
we are now doing all computations in milli-dB(m), i.e. 1/10000 bel.
Ramping is now used both for up and down ramping, as that is useful in
cases where you want to gracefully shut down a cell by shrinking its
radius, gradually handing over subscribers to neighboring cells.
Furthermore, this code is becoming part of the 'common' codebase, as it
is not really specific to how sysmobts is working.
The user can specify a single aggregate value for external system
gain/attenuation. Let's say you have 1dB loss of antenna cable, so you
can put that as 'user-gain -1' into the config, which means that a
'transmit power of 20dBm' will be compensatet for that and the TRX is
instructed to output 21dBm to compensate the cable loss. Similarly,
external PAs can be described by a positive user-gain.
One of the next steps will be to communicate those values and the
nominal power capability of the specific BTS to the BSC, so the BSC will
automatically show correct signal levels in the VTY and log files.
The code includes provisions for future extensions regarding
* an external and an internal PA with calibration tables
* a thermal attenuation setting to be controlled by the site manager
|
|
I wondered if I should use the 'abstract namespace' feature
of Linux but just put the router into /var/run/ to make it
work out of the box. Change the signature to provide a sane
error message.
|
|
Begin with the basics of a OML Router. This is currently only
capable of accepting a connection and read messages but it will
evolve into a router in multiple stages. The first usage will
be by the sysmobts-mgr. An OML Error Indication will be sent by
the sysmobts-mgr and it will be forwarded to the BSC. In the
second step we will set a relative power reduction from the
sysmobts-mgr.
In the long-term this code will be used to communicate with a
second TRX.
|