path: root/src/osmo-bts-sysmo/l1_if.c
AgeCommit message (Expand)AuthorFilesLines
2014-05-22common: Remove unused gsm_time parameter from lchan_sacch_getHolger Hans Peter Freyther1-1/+1
2014-05-17sysmobts: Support DSP API >= 3.8.1 (u8MaxCellSize)Harald Welte1-0/+4
2014-05-15sysmobts: Fix compiler warning about missing declarationÁlvaro Neira Ayuso1-0/+1
2014-03-29sysmobts: Fix build for the v1 of the sysmobtsHolger Hans Peter Freyther1-0/+2
2014-03-26sysmobts: Honor power reduction on older sysmoBTSv2 hardwareHolger Hans Peter Freyther1-7/+23
2014-03-16sysmobts: Change the order to follow the RX handling codeHolger Hans Peter Freyther1-1/+1
2014-03-16sysmobts: Improve the log message and print the hLayer2 we don't knowHolger Hans Peter Freyther1-1/+3
2014-03-10sysmobts: Do a RF mute at initialization when the RC is lockedHolger Hans Peter Freyther1-2/+2
2014-03-10handover,sysmobts: Handle handover in the sysmobts codeHolger Hans Peter Freyther1-0/+26
2014-03-10handover,sysmobts: Handle idle needed for preparation of rach handlingHolger Hans Peter Freyther1-0/+3
2014-03-10handover,sysmobts: Refactor the parsing/handling of the access delayHolger Hans Peter Freyther1-5/+10
2014-03-03sysmobts: Do not generate RF Conn failure for CCCH and PDCHHolger Hans Peter Freyther1-0/+6
2014-02-22agch/pch: Put CCCH message generation into commonJacob Erlbeck1-13/+4
2014-02-22agch/rsl: Fix msgb handling for IMMEDIATE ASSIGNJacob Erlbeck1-1/+1
2014-02-20sysmobts: Remove debug left over from the SACCH fixes we madeHolger Hans Peter Freyther1-1/+0
2014-01-27sysmobts: Add the requested TA to the field ACCH headerHolger Hans Peter Freyther1-0/+1
2014-01-27sysmobts: Correct sending of LAPDm frames on the SACCHHolger Hans Peter Freyther1-4/+7
2014-01-21sysmobts: Specify TRX nominal maximum tx power as fMaxTxPowerHarald Welte1-0/+6
2013-11-05sysmobts: Notify the BSC about all muted lchansJacob Erlbeck1-0/+30
2013-11-05sysmobts: Use status flags instead of direct LED accessJacob Erlbeck1-3/+3
2013-11-05sysmobts: Add L1 support for the new RF mute requestJacob Erlbeck1-0/+50
2013-10-10sysmobts: Attempt to fix the compilation for the v1 hardwareHolger Hans Peter Freyther1-0/+4
2013-10-09sysmobts: Don't use the clock calibration value on external clocksHarald Welte1-3/+21
2013-10-09sysmobts: Read supported bands from EEPROMHarald Welte1-2/+21
2013-10-04Use GPS as default clock source on sysmoBTS 2050Harald Welte1-2/+35
2013-07-16sysmobts: Set the clock calibration to the value read from the eepromNicolas J. Bouliane1-0/+1
2013-06-24sysmobts: Fix potential memory leaks in the prim callback handlingHolger Hans Peter Freyther1-0/+2
2013-06-22calib: Fix for new EEPROM Mode; better log msgsHarald Welte1-4/+8
2013-06-22calib: Add fixup for incompatible calib data / firmware versionHarald Welte1-8/+8
2013-05-01sysmobts: Use msgb_free instead of talloc_free to free the messageHolger Hans Peter Freyther1-2/+2
2013-05-01sysmobts: Print the lchan name for the S counter.Holger Hans Peter Freyther1-5/+8
2013-03-24sysmobts: Prepare to address the documented limitation of this codeHolger Hans Peter Freyther1-3/+12
2013-03-17Add VTY option to define minimum C/I level for RACH and normal burstAndreas Eversberg1-3/+4
2013-03-17Get RSSI from received uplink data and send to PCUAndreas Eversberg1-2/+4
2013-03-15Fix: Stop RADIO LINK TIMEOUT couter S from counting, if it has reached 0Andreas Eversberg1-19/+31
2013-03-11Added radio link timeout procedure according to TS 05.08 Chapter 5.2Andreas Eversberg1-2/+25
2013-03-07l1_if: if ul_power_target==0, hard-code MS power to what RSL saysHarald Welte1-0/+4
2013-03-06gsmtap: Put the RxLevel and RxQual in uplink GSMTAPHarald Welte1-1/+3
2013-02-27calib: Use 2.4.0 as cut-off for the firmware, log errorsHolger Hans Peter Freyther1-1/+1
2013-02-27sysmobts: Fix a memory leak when no callback is setHolger Hans Peter Freyther1-2/+6
2013-02-27sysmobts: Remove the is_system_primitive from l1if_req_complHolger Hans Peter Freyther1-6/+12
2013-02-27sysmobts: We can now pass the trx to the callback change the signaturesHolger Hans Peter Freyther1-8/+5
2013-02-27sysmobts: Remove the trx parameter from the signatureHolger Hans Peter Freyther1-8/+8
2013-02-27sysmobts: Use the hdl->priv in l1if_req_compl for all callersHolger Hans Peter Freyther1-9/+8
2013-02-27sysmobts: Remove the data parameter from the l1if_gsm_req_complHolger Hans Peter Freyther1-2/+2
2013-02-04Make sure SACCH fill frame is correctly aligned for L1 headerHarald Welte1-1/+1
2013-01-23sysmobts: Send GSM requests using the l1if_gsm_req_compl methodHolger Hans Peter Freyther1-0/+6
2013-01-23sysmobts: Rename the hLayer2<->lchan to hLayer<->lchanHolger Hans Peter Freyther1-6/+6
2013-01-23sysmobts: Ignore too short messages on the FACCH (but also the SDCCH)Holger Hans Peter Freyther1-0/+8
2013-01-23l1_if: don't print measurements a second time in case of errorHarald Welte1-1/+0