Age | Commit message (Collapse) | Author | Files | Lines |
|
Log both lchan and trx_chan_type (using introduced value_string).
Change-Id: I80c581b54eeee371ee524a75a400d1e9ece16c68
|
|
Currently the IP address where the control interface is bound
to is hardcoded to 127.0.0.1. This leads to problems with
multiple instances on one and the same machine. This commit
integrates the ctrl interface bind option into the VTY, so
that we can bind the ctrl interface to any IP address, just
like we do it with the VTY already.
Change-Id: If51e0c645c0789a4f4a8c51737fb81fb12f80829
|
|
Send 3GPP TS 12.21 § 8.8.2 Abis/OML failure event report.
Change-Id: Ib1170edca2207752984a554d7a6a57c224f6d5f5
Related: OS#1615
|
|
* Unlike in AMR FR, in AMR HR incoming ONSET have to be treated
differently depending on whether we've recently sent SID UPDATE or
EMPTY frame. Split ST_SID_U FSM state into 2 states to accommodate for
that and make sure that additional states specific to AMR HR are not
used for AMR FR.
* Avoid sending E_VOICE and E_SID_U in corresponding states
as those do not initiate FSM state transitions anyway. This decrease
extra load from FSM signalling which otherwise would be triggered on
per-frame basis.
* Introduce separate signal for SID First P1 -> P2 transition to avoid
confusion with E_COMPL and E_SID_U initiated transitions from P1
state.
* Don't init DTX FSM for SDCCH channels.
Change-Id: I229ba39a38a223fada4881fc9aca35d3639371f8
Related: OS#1801
|
|
* add vty option to manually enable adaptive RTP jitter
buffering (disabled by default) on per-bts level
* use this setting on per-lchan level when setting jitter parameters via
vty at runtime
* check and log result of osmo_rtp_socket_set_param()
* note: older libosmo-abis will ignore this setting which will be
properly detected via return value
* if jitter buffer is disabled by configuring "rtp jitter-buffer 0" than
adaptive buffering is disabled as well but it will be used if jitter
buffer is set to different value for a givel lchan via vty
Change-Id: I489f3c419039f40b57c2ef0641c176478b8d3566
|
|
Having RTP metadata is useful for debugging - save Sequence Number and
Timestamp next to Marker bit from RTP header.
Change-Id: I359b3bcb74fbfc071547fe2f9d837829374fe997
|
|
Do not assume that 1 == BS_AG_BLKS_RES but take that information from
SI3. Note: due to current implementation quirks we activate channels
before SI3 obtained, than we deactivate channels upon receiving SI3 and
activate them again. This might not be necessary once we migrate to
proper OML state machines.
This affects lc15 and sysmo hw.
Change-Id: I11377b12680ac3b2f77f80e742b6f0af63fc9c1e
Related: OS#1575
|
|
Remove lchan deactivation related code duplication to facilitate future
use for dynamic CCCH re-activation.
Change-Id: Id0d3b19dbfaa16d1734321a07a6eb0355bfd77c9
|
|
Add explicit state for recursion (sending the different payload data in
response to the RTS request for same FN) and corresponding
transition. Remove ST_FACCH_V as with new explicit recursion handling it
becomes unreacheable. This makes it easier to maintain
preemption (interruption of current procedure due to FACCH or
Inhibition). This also reduces the number of possible transitions out of
each state thus reducing graph's cyclomatic complexity.
Change-Id: If39b68083d23a4a35f468a5d75f54eb733ebfd14
|
|
Instead of using constant for link_id directly, use shared define value.
Change-Id: Ibf3d439d8893bd994ba089796175b6c635db2cf8
|
|
Make wrapper function which checks that DTX is enabled for lchan before
dispatching any events.
Change-Id: Id8b519c4af6d505ec9a4b9aadd5107bf7af53d66
|
|
Introduce dtx_dl_amr_enabled() function which checks that DTX is enabled
and FSM is allocated and use it for all corresponding checks.
Change-Id: Ifa68b641265ed14f242765c85e40da2d1021a541
|
|
* re-introduce ST_ONSET_F to guard from repetitive ONSET messages in case
multiple FACCH occur duriing DTX silence period.
* produce ONSET event after both SID FIRST and UPDATE in case of AMR FR.
* always dispatch E_SID_F (SID FIRST) signal if in talkspurt.
* allow E_SID_* right after ONSET (zero-length talkspurt).
* add missing E_ONSET signal description.
* fix FSM transitions for AMR HR *Inhibited and First P*.
* fix incorrect return from l1if_tch_encode() in ONSET FACCH with
incoming SID UPDATE
Change-Id: I0e9033c5f169da46aed9a0d1295faff489778dcf
Related: OS#1801
|
|
It was moved to OpenBSC in 582e4f627674f46310a90d9061e82fb342051b42 as
it's used by both projects.
Change-Id: I8aba987e3cdaa840cf3e14913a8455b0ba759889
|
|
Handle ONSET cause by Voice and FACCH separately. In case of Voice we
have RTP payload which we have to cache and send later on in next
response to L1 RTS. FACCH have higher priority so it preempts both voice
and silence alike - hence we can send ONSET immediately but still have
to track previous state in order to get back to it gracefully.
This affects lc15 and sysmo hw as there's no FSM-based DTX
implementation for other models yet.
Note: this requires patch for OpenBSC which adds FACCH buffer to tch.dtx
struct.
Change-Id: Idba14dcd0cb12cd7aee86391fcc152c49fcd7052
Related: OS#1802
|
|
Adopt to change in libosmo-abis to accept additional parameters in RTP
RX callback function.
Change-Id: Icf41e568f041e87b38e6192af0be90c42362bfee
|
|
SDCCH occupy lchan 0..3 in combined configuration so for CCCH we've
always used lchan[4] - replace it with CCCH_LCHAN define and add
comment.
Change-Id: Ic5d742c292d638f119c6b4672120c1950adeb7f0
|
|
Use dedicated FSM to handle all DTX DL related events:
- add explicit checks if DTX DL is enabled (fixes regression for non-DTX
setup introduced in 654175f33bd412671e3ef8cdd65c0689d10f278c)
- fix handling of AMR CMI for SPEECH frames
- add FSM for DTX DL
- sync with corresponding changes in OpenBSC's
- handle FACCH-related DTX ONSET events
This affects both lc15 and sysmobts and requires corresponding change in
OpenBSC (Change-Id: Idac8609faf9b5ced818fde899ccfc6ed0c42e8fd).
Change-Id: I74a0b42cb34d525b8a70d264135e82994ca70d31
|
|
Change-Id: I377ece2845830e3defab2d515f44b629ce5aed8e
|
|
Use "impossible" dummy value to initialize last_fn to prevent dropping
of 1st RTP frame due to timestamp jump.
Fixes: OS#1803
Change-Id: I485af21f6761048d12dc7f5552fcdd46daf786ed
|
|
The multi-trx had to be removed because of build conflicts
with octphy header that lack the struct members for needed
to support multi-trx.
For details see the following revert-commits:
ed6b48e4a5fba07c3ecccf689991799ae13a2aaa
c9a1f284acf518cb4e62c3898e20398ed53807c3
This commit reintroduces multi trx support and ads an ifdef
decision to ensure that header files without multi-trx
support still work.
Change-Id: I7f9b2906cc149c817183745b4c96bcc7f9ebdad0
|
|
Move code from tch.c (lc15, sysmo) into generic function which:
- check if talkspurt is happening
- cache SID if necessary or invalidate cache
- fill in CMR & CMI prefix
This also fixes the problem when SID FIRST was cached without sending
just like SID UPDATE instead of being sent right away.
Change-Id: I6c7016a54749abadeef4fd4f5b6f750b256fb916
|
|
* consolidate AMR CMR and CMI handling in common/amr.c
* use it in save_last_sid()
* remove dead code
* properly compute RTP payload length for AMR
* use save_last_sid() for FR & HR as well
* invalidate cached SID if SPEECH frame is received
Fixes: OS #1800, #1801
Change-Id: I5a1c1ad0b0a295a50e67775a4db85f1d331755ed
|
|
Note: this also require changes to properly link against libosmocodec -
see 2bb65be159dfdabf664fec569b343320301701b0 in libosmocore.
Change-Id: I96594cf3aa1013d505bd20069d5bf261d9a2aefb
|
|
If Marker bit is set than it's a talkspurt which we have to explicitly
indicate to L1 by first sending ONSET message and than actual voice
data in a separate message.
This change affect sysmobts and LC15 hw.
Change-Id: I88c41568bcb0d82699f617adc4ad192603dd1bb6
Related: OS#1750
|
|
Previously SID retransmission was scheduled incorrectly based on GSM
frames instead of voice frames. Fix this by using GSM Fn only as elapsed
time estimation:
* move saved SID retransmission into generic function from lc15 and sysmo
specific code
* split retransmission time check into separate generic function
* compute estimation for elapsed time since last retransmission using
GSM Fn
Change-Id: Ib054b458a7345d9ba40dba53754ca59ab099c8e8
Fixes: OS#1799
|
|
This reverts commit 06968beab90806cba94c8b331276e4dc209c152b.
Theoretically, this patch makes a lot of sense, but in order to be able to
build osmo-bts-octphy until the headers version is clarified, revert use of
usCentreArfcn:
Above commit uses an usCentreArfcn member that is never defined in the history
of our octphy-2g-headers.git. This usCentreArfcn does exist in a code snapshot
OCTSDR-2G-02.05.00-B780-DEBUG, which is not (yet?) publicly available.
Also, the current headers version is apparently 02.07, though the octasic
version numbers have been known to cause confusion among osmocom folks.
This along with one other revert fixes this build problem:
make[3]: Entering directory '/n/s/octphy/git/osmo-bts/src/osmo-bts-octphy'
CC l1_oml.o
l1_oml.c: In function ‘l1if_trx_open’:
l1_oml.c:1350:13: error: ‘tOCTVC1_GSM_TRX_CONFIG’ has no member named ‘usCentreArfcn’
oc->Config.usCentreArfcn = plink->u.octphy.center_arfcn;
^
l1_oml.c:1352:13: error: ‘tOCTVC1_GSM_TRX_CONFIG’ has no member named ‘usCentreArfcn’
oc->Config.usCentreArfcn = trx->arfcn;
^
In file included from ../../include/osmo-bts/logging.h:5:0,
from l1_oml.c:33:
l1_oml.c:1365:13: error: ‘tOCTVC1_GSM_TRX_CONFIG’ has no member named ‘usCentreArfcn’
oc->Config.usCentreArfcn, oc->Config.usTsc, oc->RfConfig.ulRxGainDb,
^
Change-Id: I222766f6961f5f35aa3651e2907e3e908fe9a66e
|
|
Prepare for a dyn TS patch that needs to call rsl_tx_chan_act_ack() directly
without the rel_act_kind decision.
Add function rsl_tx_chan_act_acknack() to wrap rsl_tx_chan_act_ack() and
rsl_tx_chan_act_nack(). Move the decision whether to drop the ack/nack, based
on lchan->rel_act_kind, to the new function, losing some code dup.
Change all callers to use the new function; drop the two older ones from rsl.h
and make them static.
Note: for nack, the exception for dyn TS in PDCH mode was missing
(rsl_tx_chan_act_nack() had only the rel_act_kind != LCHAN_REL_ACT_RSL
condition, but should also have had the dyn TS exception as in
rsl_tx_chan_act_ack()). I already know that this exception will again be
removed in an upcoming commit, but for patch readability it logically makes
sense to add it here. To easily include the nack case, drop the check for which
pchan the dyn TS is operating as, because a rel_act_kind == LCHAN_REL_ACT_PCU
implies that it is either already in or trying to become PDCH mode.
Change-Id: I57ba60c670730c6d7877a6a9b96ece0a7679a0bb
|
|
Have one common ts_is_pdch(), placed in lchan.c, since this file is pretty
empty and pretty close to ts. Publish in gsm_data.h.
Remove the if-style implementation from l1sap.c, and instead implement in a
switch statement.
This prepares for upcoming ts_is_pdch() usage in ph_data_req() for sysmo and
lc15.
Change-Id: Ib78d663fdbac5a1d7053f1b9d543649b66da00e2
|
|
Interface structure between osmo-bts and osmo-pcu is updated with the
parameters to differentiate the type of RACH and further support 11 bit
RACH. The function prototype and definitions are changed accordingly.
Interface version number is increased.
Change-Id: I4f4c501b2d86d77c78de32a84b1804172ffb6f4d
|
|
Fill in values for BER, BTO, Link quality in L1SAP and send them to
PCU. Note: this increases the version of BTS <-> PCU protocol. It also
requires corresponding changes in libosmocore.
All BTS models provide measurements data unless direct DSP access for
PCU is enabled. For BTS-specific notes see below.
Octphy: conversion from sSNRDb to Link Quality uses formulae which works
in practice instead of what's documented for sSNRDb value. Subject to
change in future revisions.
TRX: C / I link quality estimator is not computed.
Change-Id: Ic9693a044756fb1c7bd2ff3cfa0db042c3c4e01c
Related: OS#1616
|
|
Existing interfaces are coded with the implicit expectation of using
a burst sequence length of 148, which is constant with GSM and GPRS.
That changes with EGPRS, where the burst length may be 444 due to
the use of 8-PSK instead of GMSK modulation.
Setup the interface to accept and return a length value with the
burst sequence. This allows 444 length bit vectors to/from the
EGPRS decoder/encoder. Length is explicitly used as a identifier for
8-PSK vs. GMSK modulated sequences.
Change-Id: I90b46b46b11b6ce280e7f8232d5a2fccec2d4f18
Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
|
|
lchan_lookup in openbsc abis_rsl.c and rsl_lchan_lookup() rsl.c are the
same code, except for the log context, which is only set in abis_rsl.c.
The common code was factored out to gsm_data_shared.c in openbsc.git.
Use the *rc return code argument to keep the logging part in the newly
introduced thin wrapper lchan_lookup() in common/rsl.c. This also removes code
dup for logging
The rsl_lchan_lookup() implementation is removed from osmo-bts, so a recent
openbsc is needed to build this.
Change-Id: Ibc469b75e31560271be8633d524366442d27e6fb
|
|
Includes EGPRS specific convolutional codes, interleaving tables
and functions, burst mappings, training sequences, and parity
checks from 3GPP TS 44.060 needed to handle MCS codings 1-9.
Change-Id: Ie270398dd7a72f282ba53e646853d8de1eabee93
Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
|
|
Move the actual switch from static conf_lchans_for_pchan() into new 'public'
function conf_lchans_as_pchan(), adding an explicit pchan argument. This allows
passing a non-trivial pchan, for dynamic TS.
conf_lchans_as_pchan() now takes a pchan argument, so distinguish the naming
and drop the 'for_pchan' from conf_lchans_for_pchan(), which takes only a ts
argument.
Change-Id: I8e458501fff5503c243512aeb3469c12b1f2bbc4
|
|
We're about to introduce a new kind of dynamic channel, which will also use
parts of the ip.access mode dyn PDCH code paths. Make sure the general parts
have general names and mark ip.access specific parts as such.
Rename dyn_pdch_ts_[dis]connected() to cb_ts_[dis]connected().
Rename dyn_pdch_complete to ipacc_dyn_pdch_complete().
From cb_ts_[dis]connected(), factor out the current code into static
functions ipacc_dyn_pdch_[dis]connected() -- this will make sense once the
new dynamic kind is added to cb_ts_[dis]connected().
Change-Id: I7da5b7cb7b48572671f50e0dec97d9eec3083df1
|
|
Change-Id: Iea62bd98954d0219ba597613cea6db63f7a6b396
|
|
Abstract code for checking/setting lchan's UL SID flag and RTP Marker
into generic function and use it for LC15 and sysmoBTS.
Change-Id: Ica5392e92bab29164711163e7b01adb174272883
Related: OS#1750
|
|
* Remove static qualifier
* Remove duplicated code - use generic function instead
Change-Id: I37a312648771f58d3087471083cfcebbd97ccf1d
|
|
Related: OS#1750
Change-Id: Ic4342eaf7e32a0e9a5f2b16dd196a1f5f03152a9
|
|
React on IPAC PDCH ACT and DEACT messages and invoke the PCU and bts_model_ts_*
APIs to effect switchover. The dyn PDCH interaction is described in the comment
to rsl_rx_dyn_pdch(), the main entry point for PDCH switchover.
In case the bts_model_ts_* are not implemented (or return other errors),
reply with an IPAC PDCH ACT/DEACT NACK.
Add callbacks that mark steps in the PDCH switchover process,
dyn_pdch_ts_disconnected(), dyn_pdch_ts_connected() and dyn_pdch_complete().
Add hooks in l1sap.c on channel activation and release confirmation, to call
dyn PDCH callbacks.
BTS dyn PDCH implementations should invoke dyn_pdch_ts_disconnected() and
dyn_pdch_ts_connected() when bts_model_ts_disconnect() or
bts_model_ts_connect() are called, respectively. (upcoming for sysmoBTS)
Change-Id: Id2f5f77121a65d6c14eac127b3d4fb50e97a77ab
|
|
Enhance bts_model_ API in preparation of dyn PDCH switching. These will be used
to re-connect a TCH/F_PDCH TS in a different mode: either as TCH/F or as PDCH.
All implementations so far return -ENOTSUP, and thus will cause a IPAC PDCH ACT
or DEACT *NACK* to be sent to the BSC as soon as these messages are handled.
Also add stubs in tests.
Change-Id: I21e60c028a1333431c3ed000f788b654d1170b0d
|
|
Will be used in upcoming dyn PDCH switching.
Change-Id: I8031089ad5e9cb9690ca7e22facc53438f28e12a
|
|
Previously software activation could have been reported multiple times
which broke proper BTS init. Introduce guard variable to ensure
reporting happens only once.
Note: this is just minimal workaround - ideally proper OML state machine
should be implemented.
Change-Id: Ifffbdb756bc5d2864f985c01a3299b839c4de7af
Related: OS#1648
|
|
Change-Id: I173f4126cea41959d48def07bff25fcd29894b7e
|
|
Table 6
We have seen that the DSP time to time rejects PTCCH message from BTS due to invalid block number.
As a result, we patched FN2PTCCHBLOCK calculation according TS 45.0002 Table 6.
Change-Id: I8be1c8b9159c94788857c6de5440a418739f1212
|
|
Related: OS#1563
Change-Id: Ide47e8e69e0d2d5859c5249b22f4bad22c18aa57
Reviewed-on: https://gerrit.osmocom.org/108
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
|
|
There is implicit invariant in trx_phy_instance() which is actively used
by various hw-specific implementations to get TRX's phy instance. Let's
make sure there's explicit assertion for this because there's been
segfaults in the past related to it.
|
|
Explicitly store and use "center" arfcn used by each dsp (1 dsp
corresponds to 1 phy link).
|
|
I had accidently bumped the version as I thought that osmo_ph_pres_info_type
was part of the ABI. It is not an only internal to the BTS. Revert
this part of the change.
|