Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I5b2352b8d15e9b0d8616fcd526b4902d247e4693
Related: OS#1614
|
|
lchan_meas_check_compute() is a static function measurement.c.
In order to distribute the measurement result calculation events,
we need to be able to call lchan_meas_check_compute() from l1sap.c
Change-Id: Ideffe896613e0feda443bc13dac59dcdbbc605aa
|
|
add support for the TX/RX antenna-id feature that has been
introduced with release OCTSDR-2G-02.07.00-B1314-BETA. The
user can now set individual ID numbers for the TX and for
the RX antenna.
Change-Id: I872fe3c4d7b593358a4ce2f02cf0726611b9f3aa
|
|
In case a system has a high-gain external PA (like a 40dB PA) connected
externally, we cannot simply switch the transceiver to 0 dBm in
trx_init() only to then start the ramping at much lower levels once the
PHJ completes in trx_init_compl_cb(). The result would be a short
0 + 40 dBm spike followed by later ramping. We want to avoid that
spike, particularly its associated inrush current, so let's bring up the
board with smething very conservative like -50 dBm, and then ramp from
there.
Change-Id: I0ad91fce64f65e0213c9fcfde3390ace519055db
Fixes: SYS#3259
|
|
Copy-paste changes from OsmoPCU commit 0a8fae8d141c2cfa4387ffe9b35402d5b8cc85cd.
Change-Id: I15e6cc86604947a173e8675ba4b41a3bda2d3296
|
|
The macro L1SAP_IS_PTCCH(fn) only detects a PTCCH channel at fn%52 = 12,
the detection logic has been extended in order to detect PTCCH at fn%52 = 38.
See also 3GPP TS 05.02, Clause 7, Table 6 of 9
Change-Id: Ia6f3333121e5e920c5e1d562a081d0a1b58a1153
|
|
The ra parameter indicates the reason for the received rach
request. osmo-bts uses the ra parameter to determine if the
received rach request is packet access related. If yes,
osmo-bts will forward the request to the PCU.
In order to determine if the ra is packet related or not,
the higher 4 bits must be equel to 0x7 and at least one of
the lower 4 bits must be zero.
The current method lacks checking of the lower 4 bits. It
would also accept 0b01111111, which is reserved for future
use. This commit extends the check to take also the last
4 bits into accound.
See also: 3GPP TS 04.08, Table 9.9
Change-Id: I5eb88c42a91e158d9bfa4105ec9636035baf8959
|
|
channel (TRX1) of osmo-trx
Move rxgain and tx-attenuation (power) parameters from phy_link layer to phy_inst layer.
Rxgain and tx-attenuation parameters should be set for each phy_inst and send for each osmo-trx channel accordingly via control commands.
Change-Id: I4861a59d10d1ef91954e0c6ea265e66dec08844f
|
|
It seems more user friendly to look at a calibration table in terms of
the delta (positive or negative) compared to the nominal gain value,
rather than a collection of absolute gain values. It has the added
benefit that the (API/data model) user doesn't have to specify a gain
value for each ARFCN, but rather can rely on the default nominal gain in
absence of a calibration table for this specific unit.
Change-Id: I7311815902a88d2fc9d211cf4c62fa6fdc5e86ad
|
|
Improve state handling for for lock/unlock of OC_RADIO_CARRIER obj class. in
bts_model_chg_adm_state()
Change-Id: I034114beca95210169429d8ac1eb8648df12fc6c
|
|
Fix SID_FIRST_INH detection during speech and when SID_FIRST is interrupted by FACCH.
Fix SID_UPDATE_INH detection during silence and when SID_UPDATE is interrupted by FACCH.
Add a delay for SID_FIRST to appear at the right time after FACCH.
Fix extra byte sent in downlink for SID_FIRST and SID_UPDATE.
Change-Id: Ia811305e15541f2376005df736bd610e8b0d2f69
|
|
* make oml_tx_failure_event_rep() static and use osmo_signal_dispatch()
wrapped into oml_fail_rep() to trigger event reports outside of oml.c
instead of directly calling into OML layer
* remove unnecessary formatting from text messages
Related: OS#1615
Change-Id: I738555c547926e97b325ab53763c0076c42309bc
|
|
add code to configure the transmision power via VTY
Change-Id: I76bb8660eb1d8baeb6b8f69da4a6ba9ab7319981
|
|
Log both lchan and trx_chan_type (using introduced value_string).
Change-Id: I80c581b54eeee371ee524a75a400d1e9ece16c68
|
|
Currently the IP address where the control interface is bound
to is hardcoded to 127.0.0.1. This leads to problems with
multiple instances on one and the same machine. This commit
integrates the ctrl interface bind option into the VTY, so
that we can bind the ctrl interface to any IP address, just
like we do it with the VTY already.
Change-Id: If51e0c645c0789a4f4a8c51737fb81fb12f80829
|
|
Send 3GPP TS 12.21 § 8.8.2 Abis/OML failure event report.
Change-Id: Ib1170edca2207752984a554d7a6a57c224f6d5f5
Related: OS#1615
|
|
* Unlike in AMR FR, in AMR HR incoming ONSET have to be treated
differently depending on whether we've recently sent SID UPDATE or
EMPTY frame. Split ST_SID_U FSM state into 2 states to accommodate for
that and make sure that additional states specific to AMR HR are not
used for AMR FR.
* Avoid sending E_VOICE and E_SID_U in corresponding states
as those do not initiate FSM state transitions anyway. This decrease
extra load from FSM signalling which otherwise would be triggered on
per-frame basis.
* Introduce separate signal for SID First P1 -> P2 transition to avoid
confusion with E_COMPL and E_SID_U initiated transitions from P1
state.
* Don't init DTX FSM for SDCCH channels.
Change-Id: I229ba39a38a223fada4881fc9aca35d3639371f8
Related: OS#1801
|
|
* add vty option to manually enable adaptive RTP jitter
buffering (disabled by default) on per-bts level
* use this setting on per-lchan level when setting jitter parameters via
vty at runtime
* check and log result of osmo_rtp_socket_set_param()
* note: older libosmo-abis will ignore this setting which will be
properly detected via return value
* if jitter buffer is disabled by configuring "rtp jitter-buffer 0" than
adaptive buffering is disabled as well but it will be used if jitter
buffer is set to different value for a givel lchan via vty
Change-Id: I489f3c419039f40b57c2ef0641c176478b8d3566
|
|
Having RTP metadata is useful for debugging - save Sequence Number and
Timestamp next to Marker bit from RTP header.
Change-Id: I359b3bcb74fbfc071547fe2f9d837829374fe997
|
|
Do not assume that 1 == BS_AG_BLKS_RES but take that information from
SI3. Note: due to current implementation quirks we activate channels
before SI3 obtained, than we deactivate channels upon receiving SI3 and
activate them again. This might not be necessary once we migrate to
proper OML state machines.
This affects lc15 and sysmo hw.
Change-Id: I11377b12680ac3b2f77f80e742b6f0af63fc9c1e
Related: OS#1575
|
|
Remove lchan deactivation related code duplication to facilitate future
use for dynamic CCCH re-activation.
Change-Id: Id0d3b19dbfaa16d1734321a07a6eb0355bfd77c9
|
|
Add explicit state for recursion (sending the different payload data in
response to the RTS request for same FN) and corresponding
transition. Remove ST_FACCH_V as with new explicit recursion handling it
becomes unreacheable. This makes it easier to maintain
preemption (interruption of current procedure due to FACCH or
Inhibition). This also reduces the number of possible transitions out of
each state thus reducing graph's cyclomatic complexity.
Change-Id: If39b68083d23a4a35f468a5d75f54eb733ebfd14
|
|
Instead of using constant for link_id directly, use shared define value.
Change-Id: Ibf3d439d8893bd994ba089796175b6c635db2cf8
|
|
Make wrapper function which checks that DTX is enabled for lchan before
dispatching any events.
Change-Id: Id8b519c4af6d505ec9a4b9aadd5107bf7af53d66
|
|
Introduce dtx_dl_amr_enabled() function which checks that DTX is enabled
and FSM is allocated and use it for all corresponding checks.
Change-Id: Ifa68b641265ed14f242765c85e40da2d1021a541
|
|
* re-introduce ST_ONSET_F to guard from repetitive ONSET messages in case
multiple FACCH occur duriing DTX silence period.
* produce ONSET event after both SID FIRST and UPDATE in case of AMR FR.
* always dispatch E_SID_F (SID FIRST) signal if in talkspurt.
* allow E_SID_* right after ONSET (zero-length talkspurt).
* add missing E_ONSET signal description.
* fix FSM transitions for AMR HR *Inhibited and First P*.
* fix incorrect return from l1if_tch_encode() in ONSET FACCH with
incoming SID UPDATE
Change-Id: I0e9033c5f169da46aed9a0d1295faff489778dcf
Related: OS#1801
|
|
It was moved to OpenBSC in 582e4f627674f46310a90d9061e82fb342051b42 as
it's used by both projects.
Change-Id: I8aba987e3cdaa840cf3e14913a8455b0ba759889
|
|
Handle ONSET cause by Voice and FACCH separately. In case of Voice we
have RTP payload which we have to cache and send later on in next
response to L1 RTS. FACCH have higher priority so it preempts both voice
and silence alike - hence we can send ONSET immediately but still have
to track previous state in order to get back to it gracefully.
This affects lc15 and sysmo hw as there's no FSM-based DTX
implementation for other models yet.
Note: this requires patch for OpenBSC which adds FACCH buffer to tch.dtx
struct.
Change-Id: Idba14dcd0cb12cd7aee86391fcc152c49fcd7052
Related: OS#1802
|
|
Adopt to change in libosmo-abis to accept additional parameters in RTP
RX callback function.
Change-Id: Icf41e568f041e87b38e6192af0be90c42362bfee
|
|
SDCCH occupy lchan 0..3 in combined configuration so for CCCH we've
always used lchan[4] - replace it with CCCH_LCHAN define and add
comment.
Change-Id: Ic5d742c292d638f119c6b4672120c1950adeb7f0
|
|
Use dedicated FSM to handle all DTX DL related events:
- add explicit checks if DTX DL is enabled (fixes regression for non-DTX
setup introduced in 654175f33bd412671e3ef8cdd65c0689d10f278c)
- fix handling of AMR CMI for SPEECH frames
- add FSM for DTX DL
- sync with corresponding changes in OpenBSC's
- handle FACCH-related DTX ONSET events
This affects both lc15 and sysmobts and requires corresponding change in
OpenBSC (Change-Id: Idac8609faf9b5ced818fde899ccfc6ed0c42e8fd).
Change-Id: I74a0b42cb34d525b8a70d264135e82994ca70d31
|
|
Change-Id: I377ece2845830e3defab2d515f44b629ce5aed8e
|
|
Use "impossible" dummy value to initialize last_fn to prevent dropping
of 1st RTP frame due to timestamp jump.
Fixes: OS#1803
Change-Id: I485af21f6761048d12dc7f5552fcdd46daf786ed
|
|
The multi-trx had to be removed because of build conflicts
with octphy header that lack the struct members for needed
to support multi-trx.
For details see the following revert-commits:
ed6b48e4a5fba07c3ecccf689991799ae13a2aaa
c9a1f284acf518cb4e62c3898e20398ed53807c3
This commit reintroduces multi trx support and ads an ifdef
decision to ensure that header files without multi-trx
support still work.
Change-Id: I7f9b2906cc149c817183745b4c96bcc7f9ebdad0
|
|
Move code from tch.c (lc15, sysmo) into generic function which:
- check if talkspurt is happening
- cache SID if necessary or invalidate cache
- fill in CMR & CMI prefix
This also fixes the problem when SID FIRST was cached without sending
just like SID UPDATE instead of being sent right away.
Change-Id: I6c7016a54749abadeef4fd4f5b6f750b256fb916
|
|
* consolidate AMR CMR and CMI handling in common/amr.c
* use it in save_last_sid()
* remove dead code
* properly compute RTP payload length for AMR
* use save_last_sid() for FR & HR as well
* invalidate cached SID if SPEECH frame is received
Fixes: OS #1800, #1801
Change-Id: I5a1c1ad0b0a295a50e67775a4db85f1d331755ed
|
|
Note: this also require changes to properly link against libosmocodec -
see 2bb65be159dfdabf664fec569b343320301701b0 in libosmocore.
Change-Id: I96594cf3aa1013d505bd20069d5bf261d9a2aefb
|
|
If Marker bit is set than it's a talkspurt which we have to explicitly
indicate to L1 by first sending ONSET message and than actual voice
data in a separate message.
This change affect sysmobts and LC15 hw.
Change-Id: I88c41568bcb0d82699f617adc4ad192603dd1bb6
Related: OS#1750
|
|
Previously SID retransmission was scheduled incorrectly based on GSM
frames instead of voice frames. Fix this by using GSM Fn only as elapsed
time estimation:
* move saved SID retransmission into generic function from lc15 and sysmo
specific code
* split retransmission time check into separate generic function
* compute estimation for elapsed time since last retransmission using
GSM Fn
Change-Id: Ib054b458a7345d9ba40dba53754ca59ab099c8e8
Fixes: OS#1799
|
|
This reverts commit 06968beab90806cba94c8b331276e4dc209c152b.
Theoretically, this patch makes a lot of sense, but in order to be able to
build osmo-bts-octphy until the headers version is clarified, revert use of
usCentreArfcn:
Above commit uses an usCentreArfcn member that is never defined in the history
of our octphy-2g-headers.git. This usCentreArfcn does exist in a code snapshot
OCTSDR-2G-02.05.00-B780-DEBUG, which is not (yet?) publicly available.
Also, the current headers version is apparently 02.07, though the octasic
version numbers have been known to cause confusion among osmocom folks.
This along with one other revert fixes this build problem:
make[3]: Entering directory '/n/s/octphy/git/osmo-bts/src/osmo-bts-octphy'
CC l1_oml.o
l1_oml.c: In function ‘l1if_trx_open’:
l1_oml.c:1350:13: error: ‘tOCTVC1_GSM_TRX_CONFIG’ has no member named ‘usCentreArfcn’
oc->Config.usCentreArfcn = plink->u.octphy.center_arfcn;
^
l1_oml.c:1352:13: error: ‘tOCTVC1_GSM_TRX_CONFIG’ has no member named ‘usCentreArfcn’
oc->Config.usCentreArfcn = trx->arfcn;
^
In file included from ../../include/osmo-bts/logging.h:5:0,
from l1_oml.c:33:
l1_oml.c:1365:13: error: ‘tOCTVC1_GSM_TRX_CONFIG’ has no member named ‘usCentreArfcn’
oc->Config.usCentreArfcn, oc->Config.usTsc, oc->RfConfig.ulRxGainDb,
^
Change-Id: I222766f6961f5f35aa3651e2907e3e908fe9a66e
|
|
Prepare for a dyn TS patch that needs to call rsl_tx_chan_act_ack() directly
without the rel_act_kind decision.
Add function rsl_tx_chan_act_acknack() to wrap rsl_tx_chan_act_ack() and
rsl_tx_chan_act_nack(). Move the decision whether to drop the ack/nack, based
on lchan->rel_act_kind, to the new function, losing some code dup.
Change all callers to use the new function; drop the two older ones from rsl.h
and make them static.
Note: for nack, the exception for dyn TS in PDCH mode was missing
(rsl_tx_chan_act_nack() had only the rel_act_kind != LCHAN_REL_ACT_RSL
condition, but should also have had the dyn TS exception as in
rsl_tx_chan_act_ack()). I already know that this exception will again be
removed in an upcoming commit, but for patch readability it logically makes
sense to add it here. To easily include the nack case, drop the check for which
pchan the dyn TS is operating as, because a rel_act_kind == LCHAN_REL_ACT_PCU
implies that it is either already in or trying to become PDCH mode.
Change-Id: I57ba60c670730c6d7877a6a9b96ece0a7679a0bb
|
|
Have one common ts_is_pdch(), placed in lchan.c, since this file is pretty
empty and pretty close to ts. Publish in gsm_data.h.
Remove the if-style implementation from l1sap.c, and instead implement in a
switch statement.
This prepares for upcoming ts_is_pdch() usage in ph_data_req() for sysmo and
lc15.
Change-Id: Ib78d663fdbac5a1d7053f1b9d543649b66da00e2
|
|
Interface structure between osmo-bts and osmo-pcu is updated with the
parameters to differentiate the type of RACH and further support 11 bit
RACH. The function prototype and definitions are changed accordingly.
Interface version number is increased.
Change-Id: I4f4c501b2d86d77c78de32a84b1804172ffb6f4d
|
|
Fill in values for BER, BTO, Link quality in L1SAP and send them to
PCU. Note: this increases the version of BTS <-> PCU protocol. It also
requires corresponding changes in libosmocore.
All BTS models provide measurements data unless direct DSP access for
PCU is enabled. For BTS-specific notes see below.
Octphy: conversion from sSNRDb to Link Quality uses formulae which works
in practice instead of what's documented for sSNRDb value. Subject to
change in future revisions.
TRX: C / I link quality estimator is not computed.
Change-Id: Ic9693a044756fb1c7bd2ff3cfa0db042c3c4e01c
Related: OS#1616
|
|
Existing interfaces are coded with the implicit expectation of using
a burst sequence length of 148, which is constant with GSM and GPRS.
That changes with EGPRS, where the burst length may be 444 due to
the use of 8-PSK instead of GMSK modulation.
Setup the interface to accept and return a length value with the
burst sequence. This allows 444 length bit vectors to/from the
EGPRS decoder/encoder. Length is explicitly used as a identifier for
8-PSK vs. GMSK modulated sequences.
Change-Id: I90b46b46b11b6ce280e7f8232d5a2fccec2d4f18
Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
|
|
lchan_lookup in openbsc abis_rsl.c and rsl_lchan_lookup() rsl.c are the
same code, except for the log context, which is only set in abis_rsl.c.
The common code was factored out to gsm_data_shared.c in openbsc.git.
Use the *rc return code argument to keep the logging part in the newly
introduced thin wrapper lchan_lookup() in common/rsl.c. This also removes code
dup for logging
The rsl_lchan_lookup() implementation is removed from osmo-bts, so a recent
openbsc is needed to build this.
Change-Id: Ibc469b75e31560271be8633d524366442d27e6fb
|
|
Includes EGPRS specific convolutional codes, interleaving tables
and functions, burst mappings, training sequences, and parity
checks from 3GPP TS 44.060 needed to handle MCS codings 1-9.
Change-Id: Ie270398dd7a72f282ba53e646853d8de1eabee93
Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
|
|
Move the actual switch from static conf_lchans_for_pchan() into new 'public'
function conf_lchans_as_pchan(), adding an explicit pchan argument. This allows
passing a non-trivial pchan, for dynamic TS.
conf_lchans_as_pchan() now takes a pchan argument, so distinguish the naming
and drop the 'for_pchan' from conf_lchans_for_pchan(), which takes only a ts
argument.
Change-Id: I8e458501fff5503c243512aeb3469c12b1f2bbc4
|
|
We're about to introduce a new kind of dynamic channel, which will also use
parts of the ip.access mode dyn PDCH code paths. Make sure the general parts
have general names and mark ip.access specific parts as such.
Rename dyn_pdch_ts_[dis]connected() to cb_ts_[dis]connected().
Rename dyn_pdch_complete to ipacc_dyn_pdch_complete().
From cb_ts_[dis]connected(), factor out the current code into static
functions ipacc_dyn_pdch_[dis]connected() -- this will make sense once the
new dynamic kind is added to cb_ts_[dis]connected().
Change-Id: I7da5b7cb7b48572671f50e0dec97d9eec3083df1
|
|
Change-Id: Iea62bd98954d0219ba597613cea6db63f7a6b396
|