| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The loops.c code dates back to ancient times when we printed the TRX
number and the raw channel number to identify a logical channel. We
meanwhile have gsm_lchan_name() and should use it to log messages
related to this lchan in a common format.
This commit introduces the LOGPLCHAN() helper macro [similar to
osmo-bsc], and uses it from loops.c.
As a result, some functions don't need a chan_nr argument anymore,
while some need to add a new lchan argument.
Change-Id: I6976dd7444c26b1f52741bc367b0311ebbef1718
Related: OS#1622, OS#1851
|
|
This commit doesn't change internal logic of any model, only the API to
be able to return result of connect TS asyncrhonously since some models
(like osmo-bts-trx) require some time to process the result. This way
PDCH ACT/DEACT (N)ACK can be sent once the result of this long process
is known. For instance, nowadays in osmo-bts-trx we PDCH (DE)ACT ACK
before getting the result from SETSLOT on the TRX iface.
With this new API, bts_model_ts_connect doesn't return any value
synchronously. Instead, it is expected to always end up calling
cb_ts_connected with the return code from the TS activation process. 0
is considered a successs, while any other value is considered an error.
Change-Id: Ie073a4397dd2f1a691968d12b15b8b42f1e1b0cf
|
|
Change-Id: Iaa4552844db33fe69da5ed7028dbfa0100c33900
|
|
Change-Id: Ib1ecc6dcb243da27976ca0e90a83aefa18a65b76
|
|
No need to pass -t num_trx anymore to specify number of TRX to use. It
is calculated based on dynamic allocation from VTY config.
Using parameter -t is flagged as deprecated and is transformed into a
NOOP por backward compatibility.
As a result, TRX now are allocated after the BTS is allocated and
initial config (pre-VTY) is applied.
A new function bts_trx_init() is added, to set default config on each
TRX during allocation and before setting VTY config on it.
A new per BTS model function bts_model_trx_init() is added, to allow
per model specific default configuration of each TRX.
Change-Id: Iab1a754ab12a626759f9f90aa66f87bdce65ac9c
|
|
Change-Id: I327384fe5ac944dc3996a3f00932d6f1a10d5a35
|
|
This change modifies the logic of TDMA frame loss tracking. To
be more precise, the tracking logic was moved from per timeslot
level to per logical channel level, what makes OsmoBTS more
accurate in its measurements.
But before getting into details, it's important to clarify some
things about the Uplink burst processing in transceiver (OsmoTRX).
If an Uplink burst is detected, OsmoTRX demodulates it and sends
to OsmoBTS. If nothing is detected on a particular timeslot,
OsmoTRX will do nothing. In other words, it will not
notify OsmoBTS about this.
Meanwhile, there are usually a few logical channels mapped to a
single TDMA timeslot. Let's use SDCCH8 channel configuration as
an example (simplified layout):
/* SDCCH/8 (ss=0), subscriber A (active) */
{ TRXC_SDCCH8_0, bid=0 },
{ TRXC_SDCCH8_0, bid=1 },
{ TRXC_SDCCH8_0, bid=2 },
{ TRXC_SDCCH8_0, bid=3 }, // <-- last_fn=X
/* SDCCH/8 (ss=1), subscriber B (inactive) */
{ TRXC_SDCCH8_1, bid=0 },
{ TRXC_SDCCH8_1, bid=1 },
{ TRXC_SDCCH8_1, bid=2 },
{ TRXC_SDCCH8_1, bid=3 },
/* SDCCH/8 (ss=2), subscriber C (active) */
{ TRXC_SDCCH8_2, bid=0 }, // <-- current_fn=X+5
{ TRXC_SDCCH8_2, bid=1 },
{ TRXC_SDCCH8_2, bid=2 },
{ TRXC_SDCCH8_2, bid=3 },
SDCCH8 has 8 sub-slots, so up to 8 subscribers can use a single
timeslot. Let's imagine there are three subscribers: A, B, and C.
Both A and C are active subscribers, i.e. they are continuously
transmitting UL bursts, while B is not using ss=1 anymore.
The original way of TDMA frame loss tracking was the following:
- when an UL burst is received, store it's frame number in
the timeslot state structure (last_fn);
- when the next UL burst is received on same timeslot, compute
how many frames elapsed since the last_fn;
- if elapsed = (current_fn - last_fn) is lower than 10, then
iterate from (last_fn + 1) until the current_fn and send
dummy zero-filled bursts to the higher layers;
- otherwise (elapsed > 10), process the current burst,
and do nothing :/
According to our example, subscriber A is sending 4 bursts, then
nobody is sending anything, and then subscriber C is sending
4 bursts. So, there is a 4 frames long gap between the both
transmissions, which is being substituted by dummy bursts. But,
as the logical channel on ss=1 is not active, they are dropped.
This is not that scary, but the current algorithm produces lots
of false-positives, and moreover is not able to track real frame
drops in longer periods (i.e. >10). So, tracking the frame loss
per individual logical channels makes much more sense.
Let's finally drop this hackish 'while (42) { ... }', and track
the amount of lost / received TDMA frames (bursts) individually
per logical channels. Let's also use the multiframe period as
the loss detection period, instead of hardcoded 10. And finally,
let's print more informative debug messages.
Also, it makes sense to use the amount of lost / received bursts
during the calculation of the measurement reports, instead of
sending dummy bursts, but let's do this separately.
Change-Id: I70d05b67a35ddcbdd1b6394dbd7198404a440e76
Related: OS#3428
|
|
Before this patch it was being coded as SDCCH4 TS0 SS 0, and as a
result the state LCHAN_REL_ACT_OML applied in opstart_compl in abused
SDCCH4 TS0 SS 4 was not being checked when deciding whether to send a
Chan Act ACK in rsl_tx_chan_act_acknack.
Fixes: OS#3513
Change-Id: I1641960c9ffbb3ed0de74ab5b53e24e5b4ff3397
|
|
The existing implementation used a simplistic macro, which was wrong
in many ways:
1) it returned a negative value for "fn % 51 < 5" conditions without
raising any error message or asserting
2) it returned a wrong block number for many different input frame
numbers, as it didn't account properly for the FCCH/SCH gaps between
the blocks
Let's replace the simplistic macro with a proper lookup table based on
TS 05.02, and let's OSMO_ASSERT() if this is ever called with non-CCCH
frame numbers.
Change-Id: I11fd6cc558bb61c40c2019e46f56c1fe78ef39f5
Closes: OS#3024
|
|
The unit test that tests lchan_meas_process_measurement() only inputs
test data to lchan_meas_process_measurement() but it is not checked if
the interval end could be detected or not.
- Add a return code to lchan_meas_process_measurement()
- Ensure that the return code is checked in the unit-test
Change-Id: I9e00ce683e8c44528804f65181dbfed9e85e3aed
Related: OS#2975
|
|
The function is_meas_overdue() was introduced to allow
lchan_meas_process_measurement() to detect when the end of a measurement
interval has been missed. Interval ends may be missed when the SACCH
block of the related measurement interval gets lost. This is due to the
fact that the SACCH block is used as a trigger to start the measurement
result computation.
The idea behind is_meas_overdue() was to check the frame number of the
current measurement against the frame number of the previous measurement
in order to see if there was a measurement for SACCH in between or not.
Unfortunately SACCH and TCH Voice data is not necessarly processed in
order by each phy. Depending on the phy there may be a jitter between
the timing of SACCH and TCH Voice. Depending on the phy this jitter may
be enough to mess up the timing so that we see a SACCH block earlier
than expected. So we can not use the current frame number of TCH Voice
measurements to check for missed SACCH blocks.
Change-Id: Idfdbf64c1f965f35c12559b3995e2b746c74ee9e
Related: OS#3502
Related: OS#2975
|
|
This patch adds scheduler support for the channel combinations that
substitute SDCCH index 2 for a CBCH in either a SDCCH/8 or SDCCH/4.
Change-Id: Icc15603079a1709ec094f400a9bcf0008211890f
Closes: OS#1617
|
|
for some historical reason, CBCH handling was not using the normal
L1SAP boundary. Let's change that and traverse L1SAP just like for
e.g. BCCH which is quite similar to CBCH handling.
This also has the added benefit of logging CBCH via GSMTAP.
Change-Id: Ibdba4c5e808330f8406f441a97fe0e81170fce97
Closes: OS#3534
|
|
The parameter bs_ag_blks_res, which is loaded into the BTS via the SI3
setting, defines how many of the CCCH blocks shall be used for AGCH. The
remaining CCCH blocks will then be available as PCH for paging.
Unfortunately there is no unit-test yet that verifies that all of the 8
different settings for bs_ag_blks_res.
- Separate the the decision logic that checks if a given fn is part of
an AGCH into a function to have it available in the unit-test.
- Add a test that checks all possible bs_ag_blks_res settings.
Change-Id: Ib9652f4013a4da3766852f8f03ce9ec5590f6989
Related: OS#1575
|
|
The function ts45008_83_is_sub() is an integral part of the measurement
calculation as it automatically tags incoming measurements as SUB
measurements. This is important in the context of DTX. Unfortunately
there is no unit test for this function yet.
- Add unit test for ts45008_83_is_sub()
Change-Id: Ia26774859f4bf31baee075896905079368bddd42
Related: OS#3502
|
|
We do not test is_meas_complete() individually yet, but it is an
integral part of the measurement processings since this function decides
where a measurement interval ends.
- Add unit tests that test TCH/F, TCH/H, SDCCH/4 and STDCH/8
Change-Id: I8f89d9e7092cd65ba4d5c5649140692dcc20bdd6
Related: OS#2987
|
|
the measurement interval end is detected by using the measurement
indication that is related to the SACCH block as a trigger to start the
computation. If the measurement indication for the SACCH gets lost
because the block could not be received then the processing is not
executed. This may cause wrong results or when it happens condecutively
an overflow of the measurement sample buffer.
- Store the frame number of the last received measurement indication
- Use the stored frame number to check if an interval was crossed when
the next measurement indication is received. If we detect that we
missed the interval, catch up by running the computation and
start the next interval.
Change-Id: I3a86cd8185cc6b94258373fe929f0c2f1cf27cfa
Related: OS#2975
|
|
At the moment only lchan_meas_reset is reset on channel activation.
All other states are not reset. This may lead to irretations in the
first measurement interval if there are still leftover messages from
a previous connection. Lets ensure everything is reset to zero by
zeroing out the whole .meas struct in struct lchan.
- Add a centralized function that does the reset
- Call that function from rsl_tx_chan_act_ack() in rsl.c
Change-Id: I880ae3030df6dcd60c32b7144c3430528429bdea
Related: OS#2975
Related: OS#2987
|
|
In l1sap.c we call lchan_new_ul_meas() and lchan_meas_check_compute()
directly in sequence. Lets unify thos two steps inside measurement.c so
that we only need to call one function from l1sap.c.
Change-Id: If48bc7442dfaab8c36b93949f741de6e836e792a
Related: OS#2975
|
|
Each logical channel (e.g. SACCH, SDCCH, etc.) has a counter of
lost L2 frames. Let's use a bit better name for it, and correct
its description in the 'l1sched_chan_state' struct definition.
Change-Id: I92ef95f6b3f647170cfd434a970701406b0a7c82
|
|
During SACCH FILL processing, update lchan SI values only
for lchans which follow BTS-global default values, keeping
lchan-specific overrides in place.
Change-Id: I515bbd9983fa894507386b241863a9aa4d279497
Fixes: eee7247ebe0d0a54a54b53b739bdd434dfceb511
Related: OS#3173
|
|
This patch adds extended processing of the high-resolution TOA256
measurement values. It adds reporting of the following values
for each RSL MEAS REP for uplink measurements:
* minimum TOA256 value during reporting period
* maximum TOA256 value during reporting period
* standard deviation of TOA256 value during reporting period
Change-Id: Iea4a4781481f77c6163d82dcd71a844a5be87bf2
|
|
The latest octphy firmware release (octsdr-2g-02.11.00-B1927-alpha),
introduces a 16X oversampling option which is not yet supported in
osmo-bts.
- Add oversampling flag in phy_link.h
- Add VTY commands to enable/disable oversampling
- Add phy messages to enable/disable oversampling
- Add conditional compilation to preserve support for legacy
header files and firmware
Change-Id: Ib78f92bfe03ff20aa0a257763c90844fb7b87cf0
Related: SYS#4257
Patch-by: Octasic inc.
|
|
This way we give the opportunity to the BSC to release the channel
quicker, otherwise it has to wait until T3101 expires.
Same procedure is already done in rsl.c rsl_rx_imm_ass() when we return
an error (hard limit AGCH queue len reached) from bts_agch_enqueue().
Related: OS#2990
Change-Id: Id9927c0789054ce3ecc7b30380585a1ffe05db5a
|
|
The current implementation does not allow the user to specify a port
range in which the BTS is allowed to allocate a local RTP port. Also
the ports the BTS picks do not match the policy described in RFC3550.
An RTP Port must be at an even port number and the matching RTCP
port must be at the following (odd) port number. The BTS currently
picks random port numbers for both.
- Add a VTY command to specify a port range in which the BTS may
assign local ports.
- Pick ports as described in RFC3550.
Change-Id: Id75f1dfaf898ed8750d28b1c4840e188f4cfdc87
Related: OS#2825 OS#2635
|
|
A frequent configuration file error is that the unit_id settings of
osmo-bts and osmo-bsc don't match. The BSC already prints an error
in this case. Let the BTS print an error as well.
We use a heuristic for this purpose: If the OML link is dropped within
10 seconds after being established, log a special warning which alerts
the user and recommend a manual configuration file check.
Change-Id: I476ac797458b5a46edea3ae9cfbd491fd7f77f47
Related: OS#3143
|
|
Change-Id: I37c026f0e4d5ed6cbedaa237b259742f44c238b9
|
|
When a bad voice frame is received, it is replaced by
a silence frame. This may cause unpleasant audio effects.
This change implements a functionality to craft a replacement
frame from the last known good frame using ECU implementation
from libosmocodec. At the moment, only FR is supported.
Depends: libosmocore I06a21f60db01bfe1c2b838f93866fad1d53fdcd1
Change-Id: Iae9e69a9578ae305bca42f834694af96a29084e6
|
|
Completely drop bts_log_init(), call osmo_init_logging2() directly instead: all
callers of bts_log_init() passed NULL as category string, so all it ever did
was call osmo_init_logging(). The bts_log_info is already declared in the .h.
Here and there also define a proper talloc root context instead of using NULL.
Change-Id: Ic049f77bef74123b95350bcae182a468e0086b9c
|
|
This is used only in integration testing, where in the TTCN-3 testsuite
we currently have no A-bis OML implementation, but only a RSL one.
Change-Id: Id8e5f34091e6e32621d8c8673de7ea848dfd252f
|
|
Change-Id: I76dc47427ec26834859fb737bd319dc379ae8697
|
|
gsm_bts_role_bts was introduced at a time when we still shared
gsm_data_shared.[ch] between BSC and BTS, and where we then subsequently
needed a BTS-private structure. Since that sharing was abandoned quite
some time ago, we can merge gsm_bts_role_bts into gsm_bts and do away
with the bts/btsb dualism in a lot of the code.
Change-Id: I4fdd601ea873d9697f89a748cc77bcf7c978fa3e
|
|
Rathert han have 11 direct members of gsm_bts_role_bts, group them
into a sub-struct as ew do for other parts like interference, laod, ...
Change-Id: Iefecf4b70c1b11c650913f2ae3783718ffb8a36c
|
|
What we remove here is a legacy from sharing this header file with
openbsc/osmo-bsc-sccplite, which we stopped to do quite some time ago
and hence can remove those parts that are only relevant to the BSC but
not to the BTS.
Change-Id: Icac1656da68f6a006a28c779e3b563bbdd905b3d
|
|
Record the mnc_3_digits flag from SI and pass on via the PCU interface.
Instead of changing to e.g. osmo_plmn_id, add the flag separately, and instead
of bool use a uint8_t, to not raise any struct packing issues and clarify the
flag's size beyond any doubt.
Bump the PCU interface version to 9.
This is one part of the three identical pcuif_proto.h patches:
- I49cd762c3c9d7ee6a82451bdf3ffa2a060767947 (osmo-bts)
- I787fed84a7b613158a5618dd5cffafe4e4927234 (osmo-pcu)
- I78f30aef7aa224b2e9db54c3a844d8f520b3aee0 (osmo-bsc)
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore)
Change-Id: I49cd762c3c9d7ee6a82451bdf3ffa2a060767947
|
|
Add PCU_IF_MSG_DATA_CNF_DT and PCU_IF_SAPI_AGCH_DT to bring the
pccif_proto into sync. Both commands are required to support the
rb11 with an osmo-bsc co-located pcu.
Change-Id: I6d330aca26249ee94ece5e415079f0b75c6e8b48
|
|
PCU_SOCK_DEFAULT is defined in the pcu counterpart of the file pcuif_proto.h
To be consistent with the pcu move the definition pcuif_proto.h
The pcuif_proto.h will be exact the same in the pcu repo and bts repo.
Change-Id: I67f8ec036e219994cc296d0ed5409da7f3ec681e
|
|
Change-Id: I39f3bc1f0a1e238f8f00cb00e2d1e5193f118c16
|
|
Normal Abis RSL MEasurement Results contain only the "MS Timing Offset
IE" in units of full symbols. In some use cases it is important to have
higher-accuracy timing information exposed to the BSC.
We do this by adding the average timing offset value during the last
measurement interval in 1/256th symbol accuracy to the "Supplementary
MEasuremen Information" part of the TS 48.058 9.3.25 Uplink Measurements
IE.
In order to avoid any compatibility issues, this feature is only enabled
if the new vty config command "supp-meas-info toa256" at the bts node
is enabled.
Change-Id: Ie85e53b47d4041cc4e6d7b78406ae8b79b2d9397
|
|
At the end of a measurement processing window, we currently compute
the ToA / timing offset at 1/256th symbol accuracy, but we only print
it to the log. Let's store the value in the lchan to make it usable
by other code in follow-up patches.
Change-Id: I5f00a16ac966b627d9452a98b8fa70984bed684a
|
|
Before this patch we had:
* osmo-bts-trx internally using 1/256th bit/symbol period
* osmo-bts-sysmo internally using 1/4 bit/smbol period
* PCU interface using 1/4
* L1SAP interface using 1/4
* measurement processing code on top of L1SAP using 1/256
So for sysmo/lc15/octphy we are not loosing resolution, but for
osmo-bts-trx we're arbitrarily reducing the resolution via L1SAP
only then to compute with higher resolution again.
Let's change L1SAP to use 1/256 bits and hence not loose any resolution.
This requires a corresponding change in libosmocore for l1sap.h, which
is found in Change-Id Ibb58113c2819fe2d6d23ecbcfb8b3fce4055025d
Change-Id: If9b0f617845ba6c4aa47969f521734388197c9a7
|
|
Change-Id: I0dc8e78545465dfc5c93691a49b86b6b8b56b432
|
|
There's no need to express TOA as a float:
* We receive it as signed 16bit integer in units 1/256 symbol periods
* We pass it to L1SAP as signed integer in 1/4 symbol periods
So turn it into an int16_t with 1/256 symbol period accuracy throughout
the code to avoid both float arithmetic as well as loosing any precision.
Change-Id: Idce4178e0b1f7e940ebc22b3e2f340fcd544d4ec
|
|
When decoding RACH bursts, we should use a BER threshold in order to
help distinguish 'ghost' RACH bursts from real RACH bursts.
The theoretical ideal threshold according to some papers is 7 out of 41
bits qhich aquals to Eb/N0 of 0 dB = 0.1707 (17.07%)
We add a new 'ber10k' parameter to the RACH indication l1sap primitive
(needs separate change for libosmocore), and then fill this value from
osmo-bts-{sysmo,lc15,trx,octphy}. The common part above L1SAP then
applies the threshold, which can be changed from vty using the
"max-ber10k-rach <0-10000>"
command available at the BTS node. The unit is BER in 1/10000, i.e. a
value of 100 equals 1% bit error rate.
Change-Id: Ic41c11f6312a36baa2738547e8dcec80829457f8
|
|
There are use cases for the multiframe scheduler tables outside the
context of the entire scheduler. Let's prepare for that.
Related: OS#2978
Change-Id: I6a501e66c47809ae3cdc55bef2cb6390ee0096b1
|
|
Change-Id: I51e9938df0e05b8fdb12686b9a9bb6994546deed
|
|
Change-Id: Id6c833746150a3c2e32b00ea6604669f16b84bc4
|
|
This is currently only used for logging, but will be needed for proper
RX{LEV,QUAL}-SUB reporting in upcoming patches.
Related: OS#2978
Change-Id: I07fd06e8a379cab7c0c2eb111c3f5600037d3c9e
|
|
For proper measurement processing of RX{LEV,QUAL}-SUB, we will
need this information.
Related: OS#2978
Change-Id: I768fde62452a74dce471ebf946e56eb1e4de1abc
|
|
Let's make sure whenever we do have a frame number, we print it as
context in the related log line
Change-Id: I751d5ddb3322fce489bc241459738cbcc55c890b
|
