osmo-bts - Osmocom BTS-Side code (Abis, scheduling)

Age	Commit message (Collapse)	Author	Files	Lines
2017-01-04	DTX AMR HR: fix inhibition	Max	1	-0/+1
	* Unlike in AMR FR, in AMR HR incoming ONSET have to be treated differently depending on whether we've recently sent SID UPDATE or EMPTY frame. Split ST_SID_U FSM state into 2 states to accommodate for that and make sure that additional states specific to AMR HR are not used for AMR FR. * Avoid sending E_VOICE and E_SID_U in corresponding states as those do not initiate FSM state transitions anyway. This decrease extra load from FSM signalling which otherwise would be triggered on per-frame basis. * Introduce separate signal for SID First P1 -> P2 transition to avoid confusion with E_COMPL and E_SID_U initiated transitions from P1 state. * Don't init DTX FSM for SDCCH channels. Change-Id: I229ba39a38a223fada4881fc9aca35d3639371f8 Related: OS#1801
2016-12-09	Save RTP metadata in Control Buffer	Max	1	-1/+7
	Having RTP metadata is useful for debugging - save Sequence Number and Timestamp next to Marker bit from RTP header. Change-Id: I359b3bcb74fbfc071547fe2f9d837829374fe997
2016-12-01	DTX DL AMR: rewrite FSM recursion	Max	1	-0/+2
	Add explicit state for recursion (sending the different payload data in response to the RTS request for same FN) and corresponding transition. Remove ST_FACCH_V as with new explicit recursion handling it becomes unreacheable. This makes it easier to maintain preemption (interruption of current procedure due to FACCH or Inhibition). This also reduces the number of possible transitions out of each state thus reducing graph's cyclomatic complexity. Change-Id: If39b68083d23a4a35f468a5d75f54eb733ebfd14
2016-11-08	DTX: wrap FSM signal dispatching	Max	1	-0/+2
	Make wrapper function which checks that DTX is enabled for lchan before dispatching any events. Change-Id: Id8b519c4af6d505ec9a4b9aadd5107bf7af53d66
2016-11-08	DTX DL: tighten check for enabled operation	Max	1	-0/+1
	Introduce dtx_dl_amr_enabled() function which checks that DTX is enabled and FSM is allocated and use it for all corresponding checks. Change-Id: Ifa68b641265ed14f242765c85e40da2d1021a541
2016-10-13	DTX DL: use FSM for AMR	Max	1	-5/+4
	Use dedicated FSM to handle all DTX DL related events: - add explicit checks if DTX DL is enabled (fixes regression for non-DTX setup introduced in 654175f33bd412671e3ef8cdd65c0689d10f278c) - fix handling of AMR CMI for SPEECH frames - add FSM for DTX DL - sync with corresponding changes in OpenBSC's - handle FACCH-related DTX ONSET events This affects both lc15 and sysmobts and requires corresponding change in OpenBSC (Change-Id: Idac8609faf9b5ced818fde899ccfc6ed0c42e8fd). Change-Id: I74a0b42cb34d525b8a70d264135e82994ca70d31
2016-09-30	DTX: move ONSET detection into separate function	Max	1	-0/+3
	Move code from tch.c (lc15, sysmo) into generic function which: - check if talkspurt is happening - cache SID if necessary or invalidate cache - fill in CMR & CMI prefix This also fixes the problem when SID FIRST was cached without sending just like SID UPDATE instead of being sent right away. Change-Id: I6c7016a54749abadeef4fd4f5b6f750b256fb916
2016-09-30	DTX: further AMR SID cache fixes (lc15, sysmo)	Max	1	-2/+3
	* consolidate AMR CMR and CMI handling in common/amr.c * use it in save_last_sid() * remove dead code * properly compute RTP payload length for AMR * use save_last_sid() for FR & HR as well * invalidate cached SID if SPEECH frame is received Fixes: OS #1800, #1801 Change-Id: I5a1c1ad0b0a295a50e67775a4db85f1d331755ed
2016-09-30	DTX: move scheduling check inside repeat_last_sid	Max	1	-2/+2
	Note: this also require changes to properly link against libosmocodec - see 2bb65be159dfdabf664fec569b343320301701b0 in libosmocore. Change-Id: I96594cf3aa1013d505bd20069d5bf261d9a2aefb
2016-09-24	DTX: check Marker bit to send ONSET to L1	Max	1	-0/+3
	If Marker bit is set than it's a talkspurt which we have to explicitly indicate to L1 by first sending ONSET message and than actual voice data in a separate message. This change affect sysmobts and LC15 hw. Change-Id: I88c41568bcb0d82699f617adc4ad192603dd1bb6 Related: OS#1750
2016-09-23	DTX: fix SID repeat scheduling	Max	1	-0/+2
	Previously SID retransmission was scheduled incorrectly based on GSM frames instead of voice frames. Fix this by using GSM Fn only as elapsed time estimation: * move saved SID retransmission into generic function from lc15 and sysmo specific code * split retransmission time check into separate generic function * compute estimation for elapsed time since last retransmission using GSM Fn Change-Id: Ib054b458a7345d9ba40dba53754ca59ab099c8e8 Fixes: OS#1799
2016-06-23	DTXu: move copy-pasted code to common part	Max	1	-0/+1
	Abstract code for checking/setting lchan's UL SID flag and RTP Marker into generic function and use it for LC15 and sysmoBTS. Change-Id: Ica5392e92bab29164711163e7b01adb174272883 Related: OS#1750
2016-06-18	Move copy-pasted code into common part	Max	1	-0/+7
	Related: OS#1750 Change-Id: Ic4342eaf7e32a0e9a5f2b16dd196a1f5f03152a9
2014-07-31	sysmobts: Verify the structure of IPA and OML messages	Holger Hans Peter Freyther	1	-0/+20
	Extend the router to verify that the message received is properly encoded. The code can deal with the basic structure of ETSI OML and vendor specific messages for ip.access and the osmocom project.