aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--include/osmo-bts/gsm_data.h1
-rw-r--r--src/common/gsm_data.c3
-rw-r--r--src/common/power_control.c13
-rw-r--r--tests/power/bs_power_loop_test.err190
4 files changed, 105 insertions, 102 deletions
diff --git a/include/osmo-bts/gsm_data.h b/include/osmo-bts/gsm_data.h
index 256cf21d..33cb2af9 100644
--- a/include/osmo-bts/gsm_data.h
+++ b/include/osmo-bts/gsm_data.h
@@ -242,6 +242,7 @@ struct lchan_power_ctrl_state {
const struct gsm_power_ctrl_params *dpc_params;
/* Measurement pre-processing state (for dynamic mode) */
struct gsm_power_ctrl_meas_proc_state rxlev_meas_proc;
+ struct gsm_power_ctrl_meas_proc_state rxqual_meas_proc;
struct gsm_power_ctrl_meas_proc_state ci_meas_proc;
/* Number of SACCH blocks to skip (for dynamic mode) */
int skip_block_num;
diff --git a/src/common/gsm_data.c b/src/common/gsm_data.c
index 2da16bb8..721bb454 100644
--- a/src/common/gsm_data.c
+++ b/src/common/gsm_data.c
@@ -524,7 +524,8 @@ const struct gsm_power_ctrl_params power_ctrl_params_def = {
.lower_thresh = 3, /* L_RXQUAL_XX_P (0.8% <= BER < 1.6%) */
.upper_thresh = 0, /* U_RXQUAL_XX_P (BER < 0.2%) */
- /* FIXME: RxQual averaging is not yet implemented */
+ /* No averaging (filtering) by default.
+ * NOTE: only Osmocom specific EWMA is supported */
.algo = GSM_PWR_CTRL_MEAS_AVG_ALGO_NONE,
},
diff --git a/src/common/power_control.c b/src/common/power_control.c
index 4c3ff899..225198f0 100644
--- a/src/common/power_control.c
+++ b/src/common/power_control.c
@@ -286,7 +286,7 @@ int lchan_bs_pwr_ctrl(struct gsm_lchan *lchan,
const struct gsm_power_ctrl_params *params = state->dpc_params;
uint8_t rxqual_full, rxqual_sub;
uint8_t rxlev_full, rxlev_sub;
- uint8_t rxqual, rxlev;
+ uint8_t rxqual, rxqual_avg, rxlev;
int8_t dl_rssi_dbm, dl_rssi_dbm_avg;
int new_att;
@@ -343,8 +343,9 @@ int lchan_bs_pwr_ctrl(struct gsm_lchan *lchan,
dl_rssi_dbm = rxlev2dbm(rxlev);
dl_rssi_dbm_avg = do_avg_algo(&params->rxlev_meas, &state->rxlev_meas_proc, dl_rssi_dbm);
+ rxqual_avg = do_avg_algo(&params->rxqual_meas, &state->rxqual_meas_proc, rxqual);
/* If RxQual > L_RXQUAL_XX_P, try to increase Tx power */
- if (rxqual > params->rxqual_meas.lower_thresh) {
+ if (rxqual_avg > params->rxqual_meas.lower_thresh) {
/* Increase Tx power by reducing Tx attenuation */
new_att = state->current - params->inc_step_size_db;
} else {
@@ -375,20 +376,20 @@ int lchan_bs_pwr_ctrl(struct gsm_lchan *lchan,
if (state->current == new_att) {
LOGPLCHAN(lchan, DLOOP, LOGL_INFO, "Keeping DL attenuation at %u dB: "
"max %u dB, RSSI[curr %d, avg %d, thresh %d..%d] dBm, "
- "RxQual[curr %d, thresh %d..%d]\n",
+ "RxQual[curr %d, avg %d, thresh %d..%d]\n",
state->current, state->max, dl_rssi_dbm, dl_rssi_dbm_avg,
rxlev2dbm(params->rxlev_meas.lower_thresh), rxlev2dbm(params->rxlev_meas.upper_thresh),
- rxqual, params->rxqual_meas.lower_thresh, params->rxqual_meas.upper_thresh);
+ rxqual, rxqual_avg, params->rxqual_meas.lower_thresh, params->rxqual_meas.upper_thresh);
return 0;
}
LOGPLCHAN(lchan, DLOOP, LOGL_INFO, "%s DL attenuation %u dB => %u dB:"
"max %u dB, RSSI[curr %d, avg %d, thresh %d..%d] dBm, "
- "RxQual[curr %d, thresh %d..%d]\n",
+ "RxQual[curr %d, avg %d, thresh %d..%d]\n",
(new_att > state->current) ? "Raising" : "Lowering",
state->current, new_att, state->max, dl_rssi_dbm, dl_rssi_dbm_avg,
rxlev2dbm(params->rxlev_meas.lower_thresh), rxlev2dbm(params->rxlev_meas.upper_thresh),
- rxqual, params->rxqual_meas.lower_thresh, params->rxqual_meas.upper_thresh);
+ rxqual, rxqual_avg, params->rxqual_meas.lower_thresh, params->rxqual_meas.upper_thresh);
state->current = new_att;
return 1;
}
diff --git a/tests/power/bs_power_loop_test.err b/tests/power/bs_power_loop_test.err
index 6af6c3f1..dc4f411c 100644
--- a/tests/power/bs_power_loop_test.err
+++ b/tests/power/bs_power_loop_test.err
@@ -1,199 +1,199 @@
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 8 dB => 10 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 8 dB => 10 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 10 dB => 12 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 10 dB => 12 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 14 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 14 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 14 dB => 16 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 14 dB => 16 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 16 dB => 18 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 16 dB => 18 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 18 dB => 20 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 18 dB => 20 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 20 dB => 16 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 20 dB => 16 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 12 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 12 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 12 dB => 8 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 12 dB => 8 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 8 dB => 12 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 8 dB => 12 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 16 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 16 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 16 dB => 20 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 16 dB => 20 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 20 dB => 14 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 20 dB => 14 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 14 dB => 8 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 14 dB => 8 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 2 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 2 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 2 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 2 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 10 dB => 11 dB:max 20 dB, RSSI[curr -79, avg -79, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 10 dB => 11 dB:max 20 dB, RSSI[curr -79, avg -79, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(32), RXQUAL-FULL(0), RXLEV-SUB(32), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 13 dB:max 20 dB, RSSI[curr -78, avg -78, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 13 dB:max 20 dB, RSSI[curr -78, avg -78, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 13 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 13 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 13 dB => 16 dB:max 20 dB, RSSI[curr -77, avg -77, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 13 dB => 16 dB:max 20 dB, RSSI[curr -77, avg -77, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(29), RXQUAL-FULL(0), RXLEV-SUB(29), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 10 dB => 9 dB:max 20 dB, RSSI[curr -81, avg -81, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 10 dB => 9 dB:max 20 dB, RSSI[curr -81, avg -81, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 9 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 9 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(27), RXQUAL-FULL(0), RXLEV-SUB(27), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 9 dB => 6 dB:max 20 dB, RSSI[curr -83, avg -83, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 9 dB => 6 dB:max 20 dB, RSSI[curr -83, avg -83, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 6 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 6 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(25), RXQUAL-FULL(0), RXLEV-SUB(25), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 6 dB => 1 dB:max 20 dB, RSSI[curr -85, avg -85, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 6 dB => 1 dB:max 20 dB, RSSI[curr -85, avg -85, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 1 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 1 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(00), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(3), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(63), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(1), RXLEV-SUB(30), RXQUAL-SUB(1), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 1, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 1, avg 1, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(2), RXLEV-SUB(30), RXQUAL-SUB(2), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 2, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 2, avg 2, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(3), RXLEV-SUB(30), RXQUAL-SUB(3), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 3, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 3, avg 3, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(4), RXLEV-SUB(30), RXQUAL-SUB(4), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 12 dB:max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 4, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 12 dB:max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 4, avg 4, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(34), RXQUAL-FULL(5), RXLEV-SUB(34), RXQUAL-SUB(5), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 12 dB => 8 dB:max 20 dB, RSSI[curr -76, avg -76, thresh -80..-80] dBm, RxQual[curr 5, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 12 dB => 8 dB:max 20 dB, RSSI[curr -76, avg -76, thresh -80..-80] dBm, RxQual[curr 5, avg 5, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(38), RXQUAL-FULL(6), RXLEV-SUB(38), RXQUAL-SUB(6), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -72, avg -72, thresh -80..-80] dBm, RxQual[curr 6, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -72, avg -72, thresh -80..-80] dBm, RxQual[curr 6, avg 6, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(42), RXQUAL-FULL(7), RXLEV-SUB(42), RXQUAL-SUB(7), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -68, avg -68, thresh -80..-80] dBm, RxQual[curr 7, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -68, avg -68, thresh -80..-80] dBm, RxQual[curr 7, avg 7, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(46), RXQUAL-FULL(7), RXLEV-SUB(46), RXQUAL-SUB(7), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -64, avg -64, thresh -80..-80] dBm, RxQual[curr 7, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -64, avg -64, thresh -80..-80] dBm, RxQual[curr 7, avg 7, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(46), RXQUAL-FULL(0), RXLEV-SUB(46), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -64, avg -64, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -64, avg -64, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(44), RXQUAL-FULL(0), RXLEV-SUB(44), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -66, avg -66, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -66, avg -66, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(42), RXQUAL-FULL(0), RXLEV-SUB(42), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -68, avg -68, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -68, avg -68, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(7), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 7, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 7, avg 7, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(7), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 7, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 7, avg 7, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) The measurement results are not valid
(bts=0,trx=0,ts=0,ss=0) The measurement results are not valid
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 13 dB:max 16 dB, RSSI[curr -79, avg -79, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 13 dB:max 16 dB, RSSI[curr -79, avg -79, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 13 dB => 11 dB:max 16 dB, RSSI[curr -82, avg -82, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 13 dB => 11 dB:max 16 dB, RSSI[curr -82, avg -82, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 13 dB:max 16 dB, RSSI[curr -77, avg -77, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 13 dB:max 16 dB, RSSI[curr -77, avg -77, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 13 dB => 11 dB:max 16 dB, RSSI[curr -82, avg -82, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 13 dB => 11 dB:max 16 dB, RSSI[curr -82, avg -82, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -79, avg -79, thresh -83..-77] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -79, avg -79, thresh -83..-77] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -82, avg -82, thresh -83..-77] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -82, avg -82, thresh -83..-77] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -77, avg -77, thresh -83..-77] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -77, avg -77, thresh -83..-77] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -82, avg -82, thresh -83..-77] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -82, avg -82, thresh -83..-77] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 30 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 30 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 30 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 30 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(26), RXQUAL-FULL(0), RXLEV-SUB(26), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 14 dB:max 30 dB, RSSI[curr -84, avg -82, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 14 dB:max 30 dB, RSSI[curr -84, avg -82, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(26), RXQUAL-FULL(0), RXLEV-SUB(26), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 14 dB => 11 dB:max 30 dB, RSSI[curr -84, avg -83, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 14 dB => 11 dB:max 30 dB, RSSI[curr -84, avg -83, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(35), RXQUAL-FULL(0), RXLEV-SUB(35), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 12 dB:max 30 dB, RSSI[curr -75, avg -79, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 12 dB:max 30 dB, RSSI[curr -75, avg -79, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(35), RXQUAL-FULL(0), RXLEV-SUB(35), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 14 dB:max 30 dB, RSSI[curr -75, avg -77, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 14 dB:max 30 dB, RSSI[curr -75, avg -77, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-22 12:26:35 +0000