sysmobts: Add slave on/off action for the sysmoBTS2050

Add new power actions for the sysmoBTS2050. This allows to
switch off the secondary/slave when the system temperature
is too high and back on when the normal level is reached.

Do not allow to switch off the master (so remove the enum
value), do not check if the slave is switching itself off.

1 files changed, 48 insertions, 6 deletions

diff --git a/src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c b/src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c
index 9c7e7d30..7df3b050 100644
--- a/src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c
+++ b/src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c
@@ -170,6 +170,8 @@ static void write_norm_action(struct vty *vty, const char *name, int actions)
 		(actions & TEMP_ACT_NORM_PA_ON) ? "" : "no ", VTY_NEWLINE);
 	vty_out(vty, "  %sbts-service-on%s",
 		(actions & TEMP_ACT_NORM_BTS_SRV_ON) ? "" : "no ", VTY_NEWLINE);
+	vty_out(vty, "  %sslave-on%s",
+		(actions & TEMP_ACT_NORM_SLAVE_ON) ? "" : "no ", VTY_NEWLINE);
 }
 
 static void write_action(struct vty *vty, const char *name, int actions)
@@ -189,6 +191,8 @@ static void write_action(struct vty *vty, const char *name, int actions)
 		(actions & TEMP_ACT_PA_OFF) ? "" : "no ", VTY_NEWLINE);
 	vty_out(vty, "  %sbts-service-off%s",
 		(actions & TEMP_ACT_BTS_SRV_OFF) ? "" : "no ", VTY_NEWLINE);
+	vty_out(vty, "  %sslave-off%s",
+		(actions & TEMP_ACT_SLAVE_OFF) ? "" : "no ", VTY_NEWLINE);
 }
 
 static int config_write_mgr(struct vty *vty)
@@ -296,6 +300,24 @@ DEFUN(cfg_no_action_bts_srv_on, cfg_no_action_bts_srv_on_cmd,
 	return CMD_SUCCESS;
 }
 
+DEFUN(cfg_action_slave_on, cfg_action_slave_on_cmd,
+	"slave-on",
+	"Power-on secondary device on sysmoBTS2050\n")
+{
+	int *action = vty->index;
+	*action |= TEMP_ACT_NORM_SLAVE_ON;
+	return CMD_SUCCESS;
+}
+
+DEFUN(cfg_no_action_slave_on, cfg_no_action_slave_on_cmd,
+	"no slave-on",
+	NO_STR "Power-on secondary device on sysmoBTS2050\n")
+{
+	int *action = vty->index;
+	*action &= ~TEMP_ACT_NORM_SLAVE_ON;
+	return CMD_SUCCESS;
+}
+
 DEFUN(cfg_action_pa_off, cfg_action_pa_off_cmd,
 	"pa-off",
 	"Switch the Power Amplifier off\n")
@@ -332,6 +354,24 @@ DEFUN(cfg_no_action_bts_srv_off, cfg_no_action_bts_srv_off_cmd,
 	return CMD_SUCCESS;
 }
 
+DEFUN(cfg_action_slave_off, cfg_action_slave_off_cmd,
+	"slave-off",
+	"Power-off secondary device on sysmoBTS2050\n")
+{
+	int *action = vty->index;
+	*action |= TEMP_ACT_SLAVE_OFF;
+	return CMD_SUCCESS;
+}
+
+DEFUN(cfg_no_action_slave_off, cfg_no_action_slave_off_cmd,
+	"no slave-off",
+	NO_STR "Power-off secondary device on sysmoBTS2050\n")
+{
+	int *action = vty->index;
+	*action &= ~TEMP_ACT_SLAVE_OFF;
+	return CMD_SUCCESS;
+}
+
 DEFUN(show_mgr, show_mgr_cmd, "show manager",
       SHOW_STR "Display information about the manager")
 {
@@ -394,6 +434,10 @@ static void register_normal_action(int act)
 	install_element(act, &cfg_no_action_pa_on_cmd);
 	install_element(act, &cfg_action_bts_srv_on_cmd);
 	install_element(act, &cfg_no_action_bts_srv_on_cmd);
+
+	/* these only work on the sysmobts 2050 */
+	install_element(act, &cfg_action_slave_on_cmd);
+	install_element(act, &cfg_no_action_slave_on_cmd);
 }
 
 static void register_action(int act)
@@ -401,17 +445,15 @@ static void register_action(int act)
 #if 0
 	install_element(act, &cfg_action_pwr_contrl_cmd);
 	install_element(act, &cfg_no_action_pwr_contrl_cmd);
-
-	/* these only work on the sysmobts 2050 */
-	install_element(act, &cfg_action_master_off_cmd);
-	install_element(act, &cfg_no_action_master_off_cmd);
-	install_element(act, &cfg_action_slave_off_cmd);
-	install_element(act, &cfg_no_action_slave_off_cmd);
 #endif
 	install_element(act, &cfg_action_pa_off_cmd);
 	install_element(act, &cfg_no_action_pa_off_cmd);
 	install_element(act, &cfg_action_bts_srv_off_cmd);
 	install_element(act, &cfg_no_action_bts_srv_off_cmd);
+
+	/* these only work on the sysmobts 2050 */
+	install_element(act, &cfg_action_slave_off_cmd);
+	install_element(act, &cfg_no_action_slave_off_cmd);
 }
 
 int sysmobts_mgr_vty_init(void)