sysmobts: Revert all sysmobts-mgr related changes

Harald is right and that the code is generally not ready
for inclusion. I fell victim of trying to finish it while
the code is not ready at all. It is better to re-introduce
the patches in a smaller and more tested way.

The right way would have been a branch were ready things
are split-off the main/wip commit until everything is ready.

Revert "sysmobts: Have a common prefix for the enum"
This reverts commit 44980347f308fe5bbe48a933dbc81b82b53d310a.

Revert "utils: Used the enum manuf_type_id in the parameter of add_manufacturer_id_label"
This reverts commit 7d36e5ed46b630203167fc9d5d28e0087fdbd394.

Revert "utils: Classify the OML message using the return type"
This reverts commit afee0b7929a00500f9c204f3bc7e12f72451e832.

Revert "sysmobts: Do not access out of bound string"
This reverts commit f5f41e805195c8c3294a9e6a68b10f975fbabbbd.

Revert "sysmobts: Separate IPA and OML check into two methods"
This reverts commit 13a224063dfcee0be529fba1c8fb9be9c1fb261e.

Revert "screenrc: osmobts-mgr now needs a config file"
This reverts commit 0a1699ff8a5462c167c24e8b28186abb26331698.

Revert "make sure osmobts-mgr.cfg file is included in tarballs"
This reverts commit 14c60b425f8146f6a392d2d3de2979c817cd975e.

Revert "sysmobts-mgr: Add VTY support for configuring it"
This reverts commit c5fedd24c96a4ef6d7a0c0ed3c70d6ef0abd5c17.

Revert "sysmobts: Add beginnings of an OML router and create Failure Messages in the sysmobts-manager"
This reverts commit c6ab90b27006ff2d1fdfb0b1d7fc01e1dd4a696d.

1 files changed, 0 insertions, 279 deletions

diff --git a/src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c b/src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c
deleted file mode 100644
index 9a77a95a..00000000
--- a/src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/* (C) 2014 by sysmocom - s.f.m.c. GmbH
- *
- * All Rights Reserved
- *
- * Author: Alvaro Neira Ayuso <anayuso@sysmocom.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Affero General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <errno.h>
-#include <stdint.h>
-#include <ctype.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include <osmocom/vty/vty.h>
-#include <osmocom/vty/command.h>
-#include <osmocom/vty/misc.h>
-
-#include <osmo-bts/logging.h>
-
-#include "sysmobts_misc.h"
-#include "sysmobts_mgr.h"
-
-static struct sbts2050_config_info *mgr_cfg;
-
-enum node_type mgr_vty_go_parent(struct vty *vty)
-{
-	switch (vty->node) {
-	case MGR_NODE:
-		vty->node = CONFIG_NODE;
-		break;
-	default:
-		vty->node = CONFIG_NODE;
-	}
-	return vty->node;
-}
-
-int mgr_vty_is_config_node(struct vty *vty, int node)
-{
-	switch (node) {
-	case MGR_NODE:
-		return 1;
-	default:
-		return 0;
-	}
-}
-
-#define MGR_STR			"Configure sysmobts-mgr\n"
-#define MGR_TEMP_WARN_STR	"Configure the temperature warning limits\n"
-#define MGR_TEMP_SEVERE_STR	"Configure the temperature severe limits\n"
-
-static struct cmd_node mgr_node = {
-	MGR_NODE,
-	"%s(config-mgr)# ",
-	1,
-};
-
-DEFUN(cfg_mgr, cfg_mgr_cmd,
-	"config-mgr",
-	MGR_STR)
-{
-	vty->node = MGR_NODE;
-	return CMD_SUCCESS;
-}
-
-DEFUN(show_mgr, show_mgr_cmd, "show mgr",
-      SHOW_STR "Display information about the mgr")
-{
-	vty_out(vty, " temperature-warning board Min:%d Max:%d%s",
-		mgr_cfg->temp_min_board_warn_limit,
-		mgr_cfg->temp_max_board_warn_limit,
-		VTY_NEWLINE);
-
-	vty_out(vty, " temperature-severe board Min:%d Max:%d%s",
-		mgr_cfg->temp_min_board_severe_limit,
-		mgr_cfg->temp_max_board_severe_limit,
-		VTY_NEWLINE);
-
-	vty_out(vty, " temperature-warning pa Min:%d Max:%d%s",
-		mgr_cfg->temp_min_pa_warn_limit,
-		mgr_cfg->temp_max_pa_warn_limit,
-		VTY_NEWLINE);
-
-	vty_out(vty, " temperature-severe pa Min:%d Max:%d%s",
-		mgr_cfg->temp_min_pa_severe_limit,
-		mgr_cfg->temp_max_pa_severe_limit,
-		VTY_NEWLINE);
-
-	vty_out(vty, " power-action Master:%s Slave:%s PA:%s%s",
-		mgr_cfg->master_power_act ? "on" : "off",
-		mgr_cfg->slave_power_act ? "on" : "off",
-		mgr_cfg->pa_power_act ? "on" : "off",
-		VTY_NEWLINE);
-
-	vty_out(vty, " power-reduce-transmitter %d%s",
-		mgr_cfg->reduce_max_power,
-		VTY_NEWLINE);
-	return CMD_SUCCESS;
-}
-
-static int config_write_mgr(struct vty *vty)
-{
-	vty_out(vty, "config-mgr%s", VTY_NEWLINE);
-
-	vty_out(vty, " temperature-warning board %d %d%s",
-		mgr_cfg->temp_min_board_warn_limit,
-		mgr_cfg->temp_max_board_warn_limit,
-		VTY_NEWLINE);
-
-	vty_out(vty, " temperature-severe board %d %d%s",
-		mgr_cfg->temp_min_board_severe_limit,
-		mgr_cfg->temp_max_board_severe_limit,
-		VTY_NEWLINE);
-
-	vty_out(vty, " temperature-warning pa %d %d%s",
-		mgr_cfg->temp_min_pa_warn_limit,
-		mgr_cfg->temp_max_pa_warn_limit,
-		VTY_NEWLINE);
-
-	vty_out(vty, " temperature-severe pa %d %d%s",
-		mgr_cfg->temp_min_pa_severe_limit,
-		mgr_cfg->temp_max_pa_severe_limit,
-		VTY_NEWLINE);
-
-	vty_out(vty, " power-action %s %s %s%s",
-		mgr_cfg->master_power_act ? "on" : "off",
-		mgr_cfg->slave_power_act ? "on" : "off",
-		mgr_cfg->pa_power_act ? "on" : "off",
-		VTY_NEWLINE);
-
-	vty_out(vty, " power-reduce-transmitter %d%s",
-		mgr_cfg->reduce_max_power,
-		VTY_NEWLINE);
-
-	return CMD_SUCCESS;
-}
-
-DEFUN(cfg_mgr_board_temp_warn, cfg_mgr_board_temp_warn_cmd,
-	"temperature-warning board <-255-255> <-255-255>",
-	MGR_TEMP_WARN_STR
-	"Set warning temperature limits on the Board\n"
-	"Warning temperature low limit on the Board\n"
-	"Warning temperature high limit on the Board\n")
-{
-	mgr_cfg->temp_min_board_warn_limit = atoi(argv[0]);
-	mgr_cfg->temp_max_board_warn_limit = atoi(argv[1]);
-
-	return CMD_SUCCESS;
-}
-
-DEFUN(cfg_mgr_board_temp_sever, cfg_mgr_board_temp_sever_cmd,
-	"temperature-severe board <-255-255> <-255-255>",
-	MGR_TEMP_SEVERE_STR
-	"Set severe temperature limits on the Board\n"
-	"Severe temperature low limit on the Board\n"
-	"Severe Temperature  high limit on the Board\n")
-{
-	mgr_cfg->temp_min_board_severe_limit = atoi(argv[0]);
-	mgr_cfg->temp_max_board_severe_limit = atoi(argv[1]);
-
-	return CMD_SUCCESS;
-}
-
-DEFUN(cfg_mgr_pa_temp_warn, cfg_mgr_pa_temp_warn_cmd,
-	"temperature-warning pa <-255-255> <-255-255>",
-	MGR_TEMP_WARN_STR
-	"Set warning temperature limits on the PA\n"
-	"Warning temperature low limit on the PA\n"
-	"Warning temperature high limit on the PA\n")
-{
-	mgr_cfg->temp_min_pa_warn_limit = atoi(argv[0]);
-	mgr_cfg->temp_max_pa_warn_limit = atoi(argv[1]);
-
-	return CMD_SUCCESS;
-}
-
-DEFUN(cfg_mgr_pa_temp_sever, cfg_mgr_pa_temp_sever_cmd,
-	"temperature-severe pa <-255-255> <-255-255>",
-	MGR_TEMP_SEVERE_STR
-	"Set severe temperature limits on the Board\n"
-	"Severe temperature low limit on the PA\n"
-	"Severe temperature high limit on the PA\n")
-{
-	mgr_cfg->temp_min_pa_severe_limit = atoi(argv[0]);
-	mgr_cfg->temp_max_pa_severe_limit = atoi(argv[1]);
-
-	return CMD_SUCCESS;
-}
-
-DEFUN(cfg_mgr_pwr_action, cfg_mgr_pwr_action_cmd,
-	"power-action (on|off) (on|off) (on|off)",
-	"Configure which devices we want to turn on/off in several situation\n"
-	"Turn on the Master\n"
-	"Turn off the Master\n"
-	"Turn on the Slave\n"
-	"Turn off the Slave\n"
-	"Turn on the PA\n"
-	"Turn off the PA\n")
-{
-	if (strcmp(argv[0], "on") == 0)
-		mgr_cfg->master_power_act = 1;
-	else if (strcmp(argv[0], "off") == 0)
-		mgr_cfg->master_power_act = 0;
-
-	if (strcmp(argv[1], "on") == 0)
-		mgr_cfg->slave_power_act = 1;
-	else if (strcmp(argv[1], "off") == 0)
-		mgr_cfg->slave_power_act = 0;
-
-	if (strcmp(argv[2], "on") == 0)
-		mgr_cfg->pa_power_act = 1;
-	else if (strcmp(argv[2], "off") == 0)
-		mgr_cfg->pa_power_act = 0;
-
-	return CMD_SUCCESS;
-}
-
-DEFUN(cfg_mgr_pa_baud_action, cfg_mgr_pa_baud_action_cmd,
-	"power-reduce-transmitter <0-255>",
-	"Configure the power that we want to reduce in warning situation\n"
-	"Power baud transmition that we want to reduce in the PA\n")
-{
-	mgr_cfg->reduce_max_power = atoi(argv[0]);
-
-	return CMD_SUCCESS;
-}
-
-int sysmobts_mgr_vty_init(void)
-
-{
-	install_element_ve(&show_mgr_cmd);
-
-	install_node(&mgr_node, config_write_mgr);
-	install_element(CONFIG_NODE, &cfg_mgr_cmd);
-	vty_install_default(MGR_NODE);
-
-	install_element(MGR_NODE, &cfg_mgr_board_temp_warn_cmd);
-	install_element(MGR_NODE, &cfg_mgr_board_temp_sever_cmd);
-	install_element(MGR_NODE, &cfg_mgr_pa_temp_warn_cmd);
-	install_element(MGR_NODE, &cfg_mgr_pa_temp_sever_cmd);
-	install_element(MGR_NODE, &cfg_mgr_pwr_action_cmd);
-	install_element(MGR_NODE, &cfg_mgr_pa_baud_action_cmd);
-
-	return 0;
-}
-
-int sysmobts_mgr_parse_config(const char *config_file,
-			      struct sbts2050_config_info *cfg)
-{
-	int rc;
-
-	mgr_cfg = cfg;
-
-	rc = vty_read_config_file(config_file, NULL);
-	if (rc < 0) {
-		fprintf(stderr, "Failed to parse the config file: '%s'\n",
-				config_file);
-		return rc;
-	}
-
-	return 0;
-}