diff options
author | Vadim Yanitskiy <vyanitskiy@sysmocom.de> | 2021-04-16 07:02:49 +0200 |
---|---|---|
committer | laforge <laforge@osmocom.org> | 2021-04-18 06:53:33 +0000 |
commit | 9cf65a7af500ffd8613f428fb944663f4da31cae (patch) | |
tree | cccd7ee0fc1e99e67a9c0b3097c83f35939d12a0 /doc | |
parent | 078682d7b5044fba269a0822bcbf08f66c196de2 (diff) |
manuals: document new 'gsmtap-remote-host' command
Change-Id: I7f75fbac77a612493ce187cfac3c4ae203c81b23
Diffstat (limited to 'doc')
-rw-r--r-- | doc/manuals/chapters/configuration.adoc | 24 |
1 files changed, 17 insertions, 7 deletions
diff --git a/doc/manuals/chapters/configuration.adoc b/doc/manuals/chapters/configuration.adoc index ede80eaa..f6ca75e1 100644 --- a/doc/manuals/chapters/configuration.adoc +++ b/doc/manuals/chapters/configuration.adoc @@ -108,11 +108,22 @@ them via UDP/IP. At that point, they can be captured with utilities like *tcpdump* or *tshark* for further analysis by the *wireshark* protocol analyzer. -In order to activate this feature, you first need to make sure to start -OsmoBTS using the `-i` or `--gsmtap-ip` command line option, specifying -the destination IP address for the GSMTAP messages. In most cases, -using 127.0.0.1 for passing the messages over the loopback (`lo`) device -will be sufficient. +In order to activate this feature, you first need to make sure to specify +the remote address of _GSMTAP_ host in the configuration file. In most +cases, using 127.0.0.1 for passing the messages over the loopback (`lo`) +device will be sufficient: + +.Example: Enabling GSMTAP Um-frame logging to localhost +---- +bts 0 + gsmtap-remote-host 127.0.0.1 <1> +---- +<1> Destination address for _GSMTAP_ Um-frames + +NOTE: Changing this parameter at run-time will not affect the existing +_GSMTAP_ connection, full program restart is required. + +NOTE: Command line parameters `-i` and `--gsmtap-ip` have been deprecated. OsmoBTS can selectively trace such messages by their L1 SAPI, for both Rx and Tx. For a complete list of L1 SAPI values, please refer to the @@ -153,8 +164,7 @@ bts 0 From the moment they are enabled via VTY, GSMTAP messages will be generated and sent in UDP encapsulation to the IANA-registered UDP port -for GSMTAP (4729) at the IP address specified in the command line -argument. +for GSMTAP (4729) of the specified remote address. ==== Configuring power ramping |