! ! OpenBSC (0.9.11.261-32c0) configuration saved from vty !! password foo ! line vty no login ! network network country code 262 mobile network code 42 short name OpenBSC long name OpenBSC auth policy closed location updating reject cause 13 encryption a5 0 neci 1 paging any use tch 0 rrlp mode none mm info 0 handover 0 handover window rxlev averaging 10 handover window rxqual averaging 1 handover window rxlev neighbor averaging 10 handover power budget interval 6 handover power budget hysteresis 3 handover maximum distance 9999 timer t3101 10 timer t3103 0 timer t3105 0 timer t3107 0 timer t3109 0 timer t3111 0 timer t3113 60 timer t3115 0 timer t3117 0 timer t3119 0 timer t3122 0 timer t3141 0 dtx-used 1 subscriber-keep-in-ram 0 bts 0 type hsl_femto band DCS1800 cell_identity 0 location_area_code 1 training_sequence_code 0 base_station_id_code 0 ms max power 15 cell reselection hysteresis 4 rxlev access min 0 channel allocator ascending rach tx integer 9 rach max transmission 1 hsl serial-number 8303701 neighbor-list mode automatic gprs mode none trx 0 rf_locked 0 arfcn 871 nominal power 23 max_power_red 20 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config TCH/F hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0