| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Change-Id: Ie597eae82722baf32546331e443dd9d94f1f25e6
|
|
It is desirable to allow configuring handover for each individual network cell.
At the same time, it is desirable to set global defaults.
Treat the 'network' node handover parameters as global defaults, add another
set of parameters for each individual BTS.
This raises questions on how the 'network' node should affect the individual
BTS. The simplistic solution would have been: on creating a BTS in the config,
just copy the current defaults; with serious drawbacks:
- tweaking any parameter in the telnet VTY on network node will never affect
any running BTS.
- network node defaults *must* be issued before the bts sections in the config
file.
- when writing a config back to file, we would copy all net node defaults to
each BTS node, making the network node configs pointless.
Instead, add a handover_cfg API that tracks whether a given node has a value
set or not. A bts node ho_cfg gets a pointer to the network node config and
returns those values if locally unset. If no value is set on any node, use the
"factory" defaults, which are hardcoded in the API. Only write back exactly
those config items that were actually issued in a config file / on the telnet
VTY. (ho_cfg API wise, we could trivially add another ho_cfg level per TRX if
we so desire in the future.)
Implement ho parameters as an opaque config struct with getters and setters to
ensure the tracking is always heeded. Opaqueness dictates allocating instead of
direct embedding in gsm_network and gsm_bts structs, ctx is gsm_net / bts.
This is 100% backwards compatible to
old configs.
- No VTY command syntax changes (only the online help).
- If a 'bts' sets nothing, it will use the 'network' defaults.
- The 'show network' output only changes in presence of individual BTS configs.
On 'show network', say "Handover: On|Off" as before, iff all BTS reflect
identical behavior. Otherwise, output BTS counts of handover being enabled or
not.
Use the same set of VTY commands (same VTY cmd syntax as before) on network and
BTS nodes, i.e. don't duplicate VTY code. From the current vty->node, figure
out which ho_cfg to modify.
For linking, add handover_cfg.c (the value API) in libcommon, while the
handover_vty.c is in libbsc. This is mainly because some utility programs use
gsm_network and hence suck in the ho stuff, but don't need the VTY commands.
Review the VTY online help strings.
Add VTY transcript test for handover options, testing config propagation from
network to bts nodes, 'show network' output and VTY online help strings.
(Needs recent addition of '... !' wildcard to osmo_interact_common.py.)
I considered leaving parts of this more readable, but in the end decided for
heavy use of macros to define and declare the API, because more values will be
added in upcoming patches and I want to prevent myself from messing them up.
Inspired-by: jolly/new_handover branch, which moves the config to 'bts' level
Depends: I7c1ebb2e7f059047903a53de26a0ec1ce7fa9b98 (osmo-python-tests)
Change-Id: I79d35f6d3c0fbee67904378ad7f216df34fde79a
|
|
There still is a lot of dead code that we inherited from the NITB
days, let's remove more of it.
libtrau will be re-introduced as part of osmo-mgw later.
Change-Id: I8e0af56a158f25a4f1384d667c03eb20e72df5b8
|
|
According to documentation (and personal experience), AM_PATH_PYTHON
selects the highest version of python, no matter if major version is
different, which means if both python2 and 3 are available, 3 will be
chosen an PYTHON will point to "/.../python" which is python3. Apparently,
the macro cannot be easily used to pick highest python2 version.
As {vty,ctrl}_test_runner.py require python2 and are incompatible with
python3, let's instead rely on the system having a "python2" binary
available, which is the case in most distros.
Change-Id: Id22e157d1bee453babdfa7ed04c506390b0f17bb
|
|
3GPP TS ยง 08.08 defines various types of Cell Identifier List IEs, but we only
implement "entire BSS" and "one LAC". If the MSC sends a Cell Identifier List
that we don't implement, it is best for interoperability to page the entire BSS
and post a log message instead of rejecting the paging altogether. Apart from
resource management, it is not harmful to page more than the MSC requested; if
use of resources becomes an issue, the log message will guide towards the
solution of providing an actually implemented Cell Identifier List IE.
Upon IE length that is other than we expect, log the error, but also fall back
to paging the entire BSS. Overall message length correctness has been checked
earlier.
The particular case observed is that a Huwaei MSC sends a LAI for Cell
Identifier List (MCC+MNC in bcd, followed by a LAC), parsing of which we may
want to add later.
Improve logging: identify the subscriber that is being paged.
Coding style: use a switch() statement to clarify flow and provide a place to
add more implementations later.
Add regression test bssap_test.c: fabricates BSSAP Paging messages with the two
implemented Cell Identifier List IEs as well as the unimplemented LAI
identifier, verify the resulting paging LAC in wrapped function and stderr.
Change-Id: Ie934c5d229140a89763bf2efff86d6a3766cd351
|
|
This is the OsmoBSC project. Disabling the build of the BSC would be
somewhat odd, so let's remove the option.
Also, OsmoBSC depends on libosmo-sccp now, so we must unconditionally
depend on it. As a result, we can remove the --enable-nat option,
as this was only to avoid a mandatory libosmo-sccp requirement in
historical times.
Change-Id: Icfee8a904d33b7c13ab8d185d64fb5c2337d8640
|
|
Change-Id: I64d84c52f6e38e98144eb9be8f0ab82e0e1f6cca
|
|
Rewire build and includes to libosmo-legacy-mgcp.
Drop osmo-bsc_mgcp and related python tests, now found in osmo-mgw.git.
libosmo-legacy-mgcp is installed from osmo-mgw, hence add the dependency to
jenkins.sh (so far using the pre_release branch).
Change-Id: Ic99d681759edce11564da62500c2aac5cf5fffe2
|
|
libvlr now delegates subscriber management to osmo-hlr, so the database no
longer represents a HLR. It basically only stores SMS, so reflect that fact in
the default database name.
Change-Id: I3289d68d3eb63aff940b48a25b584d5e83cd0197
|
|
Change-Id: If0e7cf20b9d1eac12126955b2f5f02bd8f1192cd
|
|
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
SMS:
The SQL based lookup of SMS for attached subscribers no longer works since the
SQL database no longer has the subscriber data. Replace with a round-robin on
the SMS recipient MSISDNs paired with a VLR subscriber RAM lookup whether the
subscriber is currently attached.
If there are many SMS for not-attached subscribers in the SMS database, this
will become inefficient: a DB hit returns a pending SMS, the RAM lookup will
reveal that the subscriber is not attached, after which the DB is hit for the
next SMS. It would become more efficient e.g. by having an MSISDN based hash
list for the VLR subscribers and by marking non-attached SMS recipients in the
SMS database so that they can be excluded with the SQL query already.
There is a sanity limit to do at most 100 db hits per attempt to find a pending
SMS. So if there are more than 100 stored SMS waiting for their recipients to
actually attach to the MSC, it may take more than one SMS queue trigger to
deliver SMS for subscribers that are actually attached.
This is not very beautiful, but is merely intended to carry us over to a time
when we have a proper separate SMSC entity.
Introduce gsm_subscriber_connection ref-counting in libmsc.
Remove/Disable VTY and CTRL commands to create subscribers, which is now a task
of the OsmoHLR. Adjust the python tests accordingly.
Remove VTY cmd subscriber-keep-in-ram.
Use OSMO_GSUP_PORT = 4222 instead of 2222. See
I4222e21686c823985be8ff1f16b1182be8ad6175.
So far use the LAC from conn->bts, will be replaced by conn->lac in
Id3705236350d5f69e447046b0a764bbabc3d493c.
Related: OS#1592 OS#1974
Change-Id: I639544a6cdda77a3aafc4e3446a55393f60e4050
|
|
- bscs.config needed by the vty tests was not picked up as a dist file, because
its suffix is not 'cfg'. Rename to *.cfg. Apply this rename in
vty_test_runner.py and osmo-bsc_nat.cfg.
- Remove restart counters after external tests, otherwise distcheck complains
about uncleaned files.
- Add contrib/ipa.py to EXTRA_DIST, hence add a Makefile.am to contrib/.
Otherwise the python tests cannot find that dependency.
Change-Id: I42b55cb1125099afc3a8e3f87c0e398426b2e2a9
|
|
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
|
|
|
|
|
|
|
|
|
|
Use strdup to be able to use strtok on the category string and add
a test case. Also safe some more information to be able to use color
in the print statement.
|
|
One can use add_timer or schedule_timer to add a timer. After
the timeout time has been reached the callback will be called.
One can call add_time/schedule_timer and del_timer from within
the callback.
|
