| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
So far handover decision 1 uses the FULL or SUBSET TDMA measurements
across all measurement reports, depending on whether the last
measurement report indicates that DTX is in use or not.
Handover decision 2 since recently uses TDMA_MEAS_SET_AUTO to choose for
each individual measurement report whether to use the FULL or the SUBSET
value, depending on each single report's DTX use flag.
Also switch handover decision 1 to heed every single report's DTX flag,
by simply using TDMA_MEAS_SET_AUTO, replacing the current decision.
Change-Id: Iebe980254b8c4a53ef9e7d720e417dc67077eff7
|
|
Cosmetic preparation for enabling automatic choice between FULL and
SUBSET measurements depending on DTX in handover decision 2.
Change the internal API to pass separate enums for the choices {RXLEV,
RXQUAL}, {UL, DL} and {FULL, SUB}.
Change-Id: I283e03126a6bc1f5f1b35f9801e841053edd2947
|
|
The neighbor configuration storage is fundamentally broken: it requires
all local cells to be configured before being able to list them as
neighbors of each other. Upon config write-back, the neighbor config
however is placed back inline with the other config, and hence a
written-out neighbor config no longer works on program restart.
The cause of this problem is that the config is stored as explicit
pointers between local cells (struct gsm_bts), which of course requires
the pointer to exist before being able to reference it.
Instead, store the actual configuration that the user entered as-is,
without pointers or references to objects that need to be ready. Resolve
the neighbors every time a neighbor is needed.
Hence the user may enter any config at any place in the config file,
even non-working config (like a BTS number that doesn't exist), and the
relation to actual local or remote neighbor cells is made at runtime.
Abort program startup if the initial neighbor configuration contains
errors.
Related: OS#5018
Change-Id: I9ed992f8bfff888b3933733c0576f92d50f2625b
|
|
Place all code related to the object into the related file.
Having all the data model in one file made sense in early stage of
development to make progress quickly, but nowadays it hurts more than
helps, due to constantly growing size and more and more bits being
added to the model, gaining in complexity.
Currently, having lots of different objects mixed up in gsm_data.h is a hole
of despair, where nobody can make any sense were to properly put new stuff
in, ending up with functions related to same object in different files
or with wrong prefixes, declarations of non-existing functions, etc.
because people cannot make up their mind on strict relation to objects
in the data model.
Splitting them in files really helps finding code operating on a
specific object and helping with logically splitting in the future.
Change-Id: I00c15f5285b5c1a0109279b7ab192d5467a04ece
|
|
Fix typos and common misspellings in code comments and in the manual.
Change-Id: I46fc9d424620c77ae9ccf78b58081bd303386d7c
|
|
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
|
|
Drop numerous log statements that merely bloat the ho decision log.
Logging HO candidates: log more compact in a single line, do not use LOGPC and
multiline output. The result is more useful information in a quarter of the log
lines.
LOGPHOLCHAN(), LOGPHOLCHANTOBTS():
- log lchan->type instead of lchan->ts->pchan
- always log the speech mode
===== Before =====
DHODEC handover_decision_2.c:1131 (lchan 0.010 TCH/F) (subscr IMSI:000001) MEASUREMENT REPORT (1 neighbors)
DHODEC handover_decision_2.c:1136 (lchan 0.010 TCH/F) (subscr IMSI:000001) 0: arfcn=871 bsic=63 neigh_idx=0 rxlev=30 flags=0
DHODEC handover_decision_2.c:261 (lchan 0.010 TCH/F) (subscr IMSI:000001) neigh 871 rxlev=30 last_seen_nr=3
DHODEC handover_decision_2.c:1158 (lchan 0.010 TCH/F) (subscr IMSI:000001) HODEC2: evaluating measurement report
DHODEC handover_decision_2.c:1175 (lchan 0.010 TCH/F) (subscr IMSI:000001) Measurement report: average RX level = -110
DHODEC handover_decision_2.c:1190 (lchan 0.010 TCH/F) (subscr IMSI:000001) Virtually improving RX level from -110 to -105, due to AFS bias
DHODEC handover_decision_2.c:1220 (lchan 0.010 TCH/F) (subscr IMSI:000001) Attempting handover/assignment due to low rxlev
DHODEC handover_decision_2.c:899 (lchan 0.010 TCH/F) (subscr IMSI:000001) Collecting candidates for Assignment and Handover
DHODEC handover_decision_2.c:407 (lchan 0.010 TCH/F)->(BTS 0) (subscr IMSI:000001) tch_mode='SPEECH_AMR' type='TCH_F'
DHODEC handover_decision_2.c:313 (lchan 0.010 TCH/F) (subscr IMSI:000001) FR3 supported
DHODEC handover_decision_2.c:313 (lchan 0.010 TCH/F) (subscr IMSI:000001) HR3 supported
DHODEC handover_decision_2.c:489 (lchan 0.010 TCH/F)->(BTS 0) (subscr IMSI:000001) removing TCH/F, already on TCH/F in this cell
DHODEC handover_decision_2.c:573 (lchan 0.010 TCH/F)->(BTS 0) (subscr IMSI:000001) TCH/H would not be congested after HO
DHODEC handover_decision_2.c:605 (lchan 0.010 TCH/F)->(BTS 0) (subscr IMSI:000001) TCH/H would not be less congested in target than source cell after HO
DHODEC handover_decision_2.c:609 (lchan 0.010 TCH/F)->(BTS 0) (subscr IMSI:000001) requirements=0x30
DHODEC handover_decision_2.c:704 - current BTS 0, RX level -110
DHODEC handover_decision_2.c:707 o free TCH/F slots 3, minimum required 0
DHODEC handover_decision_2.c:709 o free TCH/H slots 4, minimum required 0
DHODEC handover_decision_2.c:714 o no requirement fulfilled for TCHF (no assignment possible)
DHODEC handover_decision_2.c:737 o requirement A B fulfilled for TCHH (not congested after assignment)
DHODEC handover_decision_2.c:407 (lchan 0.010 TCH/F)->(BTS 1) (subscr IMSI:000001) tch_mode='SPEECH_AMR' type='TCH_F'
DHODEC handover_decision_2.c:313 (lchan 0.010 TCH/F) (subscr IMSI:000001) FR3 supported
DHODEC handover_decision_2.c:313 (lchan 0.010 TCH/F) (subscr IMSI:000001) HR3 supported
DHODEC handover_decision_2.c:563 (lchan 0.010 TCH/F)->(BTS 1) (subscr IMSI:000001) TCH/F would not be congested after HO
DHODEC handover_decision_2.c:573 (lchan 0.010 TCH/F)->(BTS 1) (subscr IMSI:000001) TCH/H would not be congested after HO
DHODEC handover_decision_2.c:595 (lchan 0.010 TCH/F)->(BTS 1) (subscr IMSI:000001) TCH/F would not be less congested in target than source cell after HO
DHODEC handover_decision_2.c:605 (lchan 0.010 TCH/F)->(BTS 1) (subscr IMSI:000001) TCH/H would not be less congested in target than source cell after HO
DHODEC handover_decision_2.c:609 (lchan 0.010 TCH/F)->(BTS 1) (subscr IMSI:000001) requirements=0x33
DHODEC handover_decision_2.c:701 - neighbor BTS 1, RX level -110 -> -80
DHODEC handover_decision_2.c:707 o free TCH/F slots 4, minimum required 0
DHODEC handover_decision_2.c:709 o free TCH/H slots 4, minimum required 0
DHODEC handover_decision_2.c:712 o requirement A B fulfilled for TCHF (not congested after handover)
DHODEC handover_decision_2.c:737 o requirement A B fulfilled for TCHH (not congested after handover)
DHODEC handover_decision_2.c:914 (lchan 0.010 TCH/F) (subscr IMSI:000001) adding 2 candidates from 1 neighbors, total 2
DHODEC handover_decision_2.c:1020 (lchan 0.010 TCH/F)->(BTS 1) (subscr IMSI:000001) Best candidate, RX level -80
DHODEC handover_decision_2.c:625 (lchan 0.010 TCH/F)->(BTS 1) (subscr IMSI:000001) Triggering Handover
DHODEC handover_decision_2.c:688 (lchan 0.010 TCH/F)->(BTS 1) (subscr IMSI:000001) Triggering handover to TCH/F, due to low rxlevel
DHO handover_logic.c:133 (BTS 0 trx 0 ts 1 lchan 0 TCH/F)->(BTS 1 lchan TCH_F) Initiating Handover...
DMSC handover_logic.c:135 SUBSCR_CONN[0x612000000520]{ACTIVE}: Received Event HO_START
DHODEC handover_logic.c:172 (BTS 0 trx 0 arfcn 870 ts 1 lchan 0 TCH/F)->(BTS 1 trx 0 arfcn 871 ts 1 lchan 0 TCH/F) (subscr IMSI:000001) Triggering Handover
===== After =====
DHODEC handover_decision_2.c:1039 (lchan 0.010 TCH_F SPEECH_AMR) (subscr IMSI:000001) MEASUREMENT REPORT (1 neighbors)
DHODEC handover_decision_2.c:1044 (lchan 0.010 TCH_F SPEECH_AMR) (subscr IMSI:000001) 0: arfcn=871 bsic=63 neigh_idx=0 rxlev=30 flags=0
DHODEC handover_decision_2.c:1097 (lchan 0.010 TCH_F SPEECH_AMR) (subscr IMSI:000001) Avg RX level = -110 dBm, +5 dBm AFS bias = -105 dBm; Avg RX quality = -1 (invalid), +0 AFS bias = -1
DHODEC handover_decision_2.c:1122 (lchan 0.010 TCH_F SPEECH_AMR) (subscr IMSI:000001) RX level is TOO LOW: -105 < -100
DHODEC handover_decision_2.c:677 (lchan 0.010 TCH_F SPEECH_AMR)->(BTS 0) (subscr IMSI:000001) RX level -110; TCH/F={free 3 (want 0), [-] not a candidate}; TCH/H={free 4 (want 0), [ABC] good}
DHODEC handover_decision_2.c:671 (lchan 0.010 TCH_F SPEECH_AMR)->(BTS 1) (subscr IMSI:000001) RX level -110 -> -80; TCH/F={free 4 (want 0), [ABC] good}; TCH/H={free 4 (want 0), [ABC] good}
DHODEC handover_decision_2.c:928 (lchan 0.010 TCH_F SPEECH_AMR)->(BTS 1) (subscr IMSI:000001) Best candidate, RX level -80
DHODEC handover_decision_2.c:641 (lchan 0.010 TCH_F SPEECH_AMR)->(BTS 1) (subscr IMSI:000001) Triggering handover to TCH/F, due to low rxlevel
DMSC handover_logic.c:125 SUBSCR_CONN[0x612000000520]{ACTIVE}: Received Event HO_START
DHODEC handover_logic.c:169 (BTS 0 trx 0 arfcn 870 ts 1 lchan 0 TCH_F SPEECH_AMR)->(BTS 1 trx 0 arfcn 871 ts 1 lchan 0 TCH/F) (subscr IMSI:000001) Triggering Handover
Change-Id: If1add9b57a051d32b67a4a08ab47a9655aa9dd17
|
|
Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to
allow linking from utils/* and ipaccess/* without pulling in unccessary
dependencies.
Some utilities use gsm_network and gsm_bts structs, which already include data
structures for fairly advanced uses. Move initialization that only osmo-bsc
needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so
that the leaner tools can use the old gsm_* versions without the need to link
everything (e.g. handover and lchan alloc code).
In some instances, there need to be stubs if to cut off linking "just before
the RSL level" and prevent dependencies from creeping in.
- abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is
osmo-bsc, the utils are merely concerned with OML, if at all.
- paging_flush_bts(): ip.access nanobts models call this when the RSL link is
dropped. Only osmo-bsc actually needs to do anything there.
- on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related
to OML, while this action to take on init would pull in RSL dependencies.
utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests
implement stubs inline where required.
From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/.
In order for this to work, the osmo-bsc subdir must be built before the other
source trees. (An alternative would be to include the .c files as sources, but
that would re-compile them in every source tree. Not a large burden really, but
unless linking .o files gives problems, let's have the quicker build.)
Minor obvious cleanups creep in with this patch, I will not bother to name them
individually now unless code review asks me to.
Rationale:
1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old
openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc
is distracting.
2) Recently, ridiculous linking requirements have made adding new functions
cumbersome, because libbsc has started depending on osmo-bsc/*.c
implementations: on gscon FSM and bssap functions. For example, neither
bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP
message composition. It makes no sense to link the entire osmo-bsc to it, nor
do we want to keep adding stubs to each linking realm.
Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
|
