Age | Commit message (Collapse) | Author | Files | Lines |
|
Move gsm_data.c and handover_cfg.c to libbsc, where they belong.
This leaves libcommon utterly empty, drop it.
Change-Id: I6178061fa30c7e1a4c22c29d3c8f508b1033569f
|
|
The separation of gsm_data_shared.* from gsm_data.* historically allowed
compiling parts of it into osmo-bts, which we have dropped since (osmo-bts has
its own copy now). Even though gsm_data.* now becomes rather large by it,
remove the legacy separation to get rid of the "shared" naming, which is no
longer meaningful. A future patch might separate into meaningful smaller bits,
if we get the time.
Change-Id: Ie247bc492efb331871d970c56700595ad3f7e201
|
|
Interestingly enough, talloc_ctx_init() actually had not a single caller.
While dropping it, see to it that the few contexts that are actually used in
osmo-bsc.git are indeed initialized in all the main scopes.
Also initialize two void* ctxts as NULL explicitly, to allocate under the NULL
context in case some main scope forgets to branch it off another root context.
(That's bsc, fle and paging, all others actually come in from other libraries.)
Change-Id: I344a3d07e146999e154824837ed95db2b9879356
|
|
It is desirable to allow configuring handover for each individual network cell.
At the same time, it is desirable to set global defaults.
Treat the 'network' node handover parameters as global defaults, add another
set of parameters for each individual BTS.
This raises questions on how the 'network' node should affect the individual
BTS. The simplistic solution would have been: on creating a BTS in the config,
just copy the current defaults; with serious drawbacks:
- tweaking any parameter in the telnet VTY on network node will never affect
any running BTS.
- network node defaults *must* be issued before the bts sections in the config
file.
- when writing a config back to file, we would copy all net node defaults to
each BTS node, making the network node configs pointless.
Instead, add a handover_cfg API that tracks whether a given node has a value
set or not. A bts node ho_cfg gets a pointer to the network node config and
returns those values if locally unset. If no value is set on any node, use the
"factory" defaults, which are hardcoded in the API. Only write back exactly
those config items that were actually issued in a config file / on the telnet
VTY. (ho_cfg API wise, we could trivially add another ho_cfg level per TRX if
we so desire in the future.)
Implement ho parameters as an opaque config struct with getters and setters to
ensure the tracking is always heeded. Opaqueness dictates allocating instead of
direct embedding in gsm_network and gsm_bts structs, ctx is gsm_net / bts.
This is 100% backwards compatible to
old configs.
- No VTY command syntax changes (only the online help).
- If a 'bts' sets nothing, it will use the 'network' defaults.
- The 'show network' output only changes in presence of individual BTS configs.
On 'show network', say "Handover: On|Off" as before, iff all BTS reflect
identical behavior. Otherwise, output BTS counts of handover being enabled or
not.
Use the same set of VTY commands (same VTY cmd syntax as before) on network and
BTS nodes, i.e. don't duplicate VTY code. From the current vty->node, figure
out which ho_cfg to modify.
For linking, add handover_cfg.c (the value API) in libcommon, while the
handover_vty.c is in libbsc. This is mainly because some utility programs use
gsm_network and hence suck in the ho stuff, but don't need the VTY commands.
Review the VTY online help strings.
Add VTY transcript test for handover options, testing config propagation from
network to bts nodes, 'show network' output and VTY online help strings.
(Needs recent addition of '... !' wildcard to osmo_interact_common.py.)
I considered leaving parts of this more readable, but in the end decided for
heavy use of macros to define and declare the API, because more values will be
added in upcoming patches and I want to prevent myself from messing them up.
Inspired-by: jolly/new_handover branch, which moves the config to 'bts' level
Depends: I7c1ebb2e7f059047903a53de26a0ec1ce7fa9b98 (osmo-python-tests)
Change-Id: I79d35f6d3c0fbee67904378ad7f216df34fde79a
|
|
Change-Id: I919bffe88babd90227c89abd4434322965c32ebb
|
|
RRLP is handled in OsmoMSC after the split from NITB, so let's remove
any bogus VTY commands left over in the BSC.
Change-Id: Ib626f43a3a3ca69dfc127afe5832eb58f7fb6a38
|
|
Prepare for a future change that accesses bts->network during gsm_bts_alloc().
Currently, gsm_bts_alloc() takes a ctx parameter, and gsm_bts_alloc_register()
then gets the gsm_network pointer and sets bts->network to it. All callers
anyway pass gsm_network as ctx to gsm_bts_alloc(), and anything else would not
make sense anyway. So enforce passing exactly gsm_network to gsm_bts_alloc()
and already set the bts->network pointer from there.
Prepares-for: I00870a5828703cf397776668d3301c0c3a4e033a
Change-Id: Ie590c14aa08df4c4f345596b23e5226c5577057a
|
|
In state prior to this patch, "3G Early Classmark Sending Restriction"
bit in SI3 rest octets was always set to H, which is a sane default as
the policy to send the information is then controlled by "Early
Classmark Sending Control" bit in the same octet.
However, it seems Quortus SoftCore can have some issues decoding the
option, so let's add a vty cmd to be able to disable it for those
having any issues.
Related: SYS#4021
Change-Id: Ic1afe071038a3bb5871d7ff40f665c8644f801ec
|
|
Change-Id: I39e7b882caa98334636d19ccd104fd83d07d5055
|
|
Change-Id: I64d84c52f6e38e98144eb9be8f0ab82e0e1f6cca
|
|
Fixes regression probably introduced in c696cc28.
For bts>0 logging doesn't show bts number correctly when printing lchan
identification string - it will always show it as "bts=0". The reason for
this is that the identification string is cached before bts->nr value is
set to a proper value.
This patch sets bts->nr as part of the first step of the bts structure
initialization, before caching happens thus making sure the cached
identification string is cached with the correct values.
Change-Id: I61c18a7f021fcb1ec00d34a745f4e3ab03416c2d
|
|
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
|
|
Disable large parts of the code that depend on BSC presence. The code sections
disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of
adding the A-interface.
Don't set msg->lchan nor msg->dst.
Don't use lchan in libmsc.
Decouple lac from bts.
Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication:
Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to
different interfaces depending on the actual subscriber connection.
While iu_tx() is going to be functional fairly soon, the a_tx() is going to be
just a dummy for some time (see comment).
Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer
and an indicator for the Integrity Protection status on Iu (to be fully
implemented in later commits).
Add lac member to gsm_subscriber_connection, to allow decoupling from
bts->location_area_code. The conn->lac will actually be set in iu.c in an
upcoming commit ("add iucs.[hc]").
move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi().
libmsc: duplicate gsm0808 / gsm48 functions (towards BSC).
In osmo-nitb, libmsc would directly call the functions on the BSC level, not
always via the bsc_api. When separating libmsc from libbsc, some functions are
missing from the linkage.
Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also
add a _tx to gsm0808_cipher_mode():
* add msc_gsm0808_tx_cipher_mode() (dummy/stub)
* add msc_gsm48_tx_mm_serv_ack()
* add msc_gsm48_tx_mm_serv_rej()
Call these from libmsc instead of
* gsm0808_cipher_mode()
* gsm48_tx_mm_serv_ack()
* gsm48_tx_mm_serv_rej()
Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places.
Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC,
this will be done with an external MGCP gateway.
Remove LCHAN_MODIFY from internal MNCC state machine.
Temporarily disable all paging to be able to link libmsc without libbsc.
Skip the paging part of channel_test because the paging is now disabled.
Employ fake paging shims in order for msc_vlr_tests to still work.
msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values
for return val, to avoid dependency on libbsc headers. Make callable from
other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c
add gsm_encr to subscr_conn
move subscr_request to gsm_subscriber.h
subscr_request_channel() -> subscr_request_conn()
move to libmsc: osmo_stats_vty_add_cmds()
gsm_04_08: remove apply_codec_restrictions()
gsm0408_test: use NULL for root ctx
move to libbsc: gsm_bts_neighbor()
move to libbsc: lchan_next_meas_rep()
move vty config for t3212 to network level (periodic lu)
remove unneccessary linking from some tests
remove handle_abisip_signal()
abis_rsl.c: don't use libvlr from libbsc
gsm_subscriber_connection: put the LAC here, so that it is available without
accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of
transition: Iu and A will use this new field to pass the LAC around, but in a
completely separate OsmoBSC this is not actually needed. It can be removed
again from osmo-bsc.git when the time has come.
Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall
be added in osmo-bsc once the A-Interface code has settled. See OS#2389.
Related: OS#1845 OS#2257 OS#2389
Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
|
|
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
SMS:
The SQL based lookup of SMS for attached subscribers no longer works since the
SQL database no longer has the subscriber data. Replace with a round-robin on
the SMS recipient MSISDNs paired with a VLR subscriber RAM lookup whether the
subscriber is currently attached.
If there are many SMS for not-attached subscribers in the SMS database, this
will become inefficient: a DB hit returns a pending SMS, the RAM lookup will
reveal that the subscriber is not attached, after which the DB is hit for the
next SMS. It would become more efficient e.g. by having an MSISDN based hash
list for the VLR subscribers and by marking non-attached SMS recipients in the
SMS database so that they can be excluded with the SQL query already.
There is a sanity limit to do at most 100 db hits per attempt to find a pending
SMS. So if there are more than 100 stored SMS waiting for their recipients to
actually attach to the MSC, it may take more than one SMS queue trigger to
deliver SMS for subscribers that are actually attached.
This is not very beautiful, but is merely intended to carry us over to a time
when we have a proper separate SMSC entity.
Introduce gsm_subscriber_connection ref-counting in libmsc.
Remove/Disable VTY and CTRL commands to create subscribers, which is now a task
of the OsmoHLR. Adjust the python tests accordingly.
Remove VTY cmd subscriber-keep-in-ram.
Use OSMO_GSUP_PORT = 4222 instead of 2222. See
I4222e21686c823985be8ff1f16b1182be8ad6175.
So far use the LAC from conn->bts, will be replaced by conn->lac in
Id3705236350d5f69e447046b0a764bbabc3d493c.
Related: OS#1592 OS#1974
Change-Id: I639544a6cdda77a3aafc4e3446a55393f60e4050
|
|
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
|