Age | Commit message (Collapse) | Author | Files | Lines |
|
This field was used in write-pnly mode, i.e. set but never read.
Change-Id: I319945538fd3e3bc5cf3b9d82533641cb8ba5256
|
|
The network name and other MM INFO is controlled by the MSC, not the BSC.
Change-Id: I1cbf72fc50cff29e7c1633ba752cbf15b4b84c58
|
|
The LU reject cause (like anything MM related) is under control of
OsmoMSC, not BSC.
Change-Id: I559ae31d67726845c9699c8b6127e21c6f63ace6
|
|
RRLP is handled in OsmoMSC after the split from NITB, so let's remove
any bogus VTY commands left over in the BSC.
Change-Id: Ib626f43a3a3ca69dfc127afe5832eb58f7fb6a38
|
|
There still is a lot of dead code that we inherited from the NITB
days, let's remove more of it.
libtrau will be re-introduced as part of osmo-mgw later.
Change-Id: I8e0af56a158f25a4f1384d667c03eb20e72df5b8
|
|
Change-Id: I7f7ec44887f6b40fdce8d348e9e9bd200fe0b689
|
|
Change-Id: I3f6d138df9ddc9c6560d04e2e8baa1f3a50a164f
|
|
Those NACKs shouldn't happen in production, and if they do, you probably
want to have a more persistent figure than a line in the log file about
it. Having counters allows the user to monitor this efficiently.
Change-Id: Ic82c6baaf4cb88d07bc5cdc200f8279cf130f396
|
|
Those NACKs (CRCX/MDCX/PDCH_ACT) shouldn't happen in production, and
if they do, you probably want to have a more persistent figure than
a line in the log file about it. Having counters allows the user
to monitor this efficiently.
Change-Id: I5edf979c9a2b4c9a5a60eef9f66c26da54f2bddf
|
|
Change-Id: I268f222140fa5783e1d19f81fbd45614aaa4b8c4
|
|
Change-Id: I471b598af194dee78ebaa3414b6290c72d9bbcff
|
|
Counting the number of T3113 expirations (one per subscriber per BTS)
vs the number of paging attempts (Bsc global) is a ueseless figure,
as you cannot relate each other.
We count on the BSC level:
* how many PAGING we received from the MSC (total)
* how many of those were for cells/LACs we don't serve
* how many of those resulted in PAGING RESPONSE
We count on the BTS leve:
* how many PAGING CMD we sent to the BTS (total)
* how many of those we ignored as we were already paging
* how many of those resulted in PAGING RESPONSE
* how many were expired due to T3113 expiring
Change-Id: I410bbcbb2621f95f11238f7a5da01ab438f5fee1
|
|
The BSSMAP reset causes the paging requests to be flushed. When
this happens right after startup then calling paging_flush_bts()
may be called when the list bts->paging.pending_requests is not
yet initalized, which causes a segfault.
Call paging_init_if_needed() to be sure that the list is
inizalized (like the other functions also do)
Change-Id: I42ddbfdec6f9d74d858ad13cc38b5b64061d08dc
|
|
Initialize the llist head gsm_bts->paging.pending_requests at the time gsm_bts
is allocated, not only at paging_init_if_needed().
The gsm_bts->paging sub-struct is invalid as long as gsm_bts->paging.bts
doesn't point back to bts. Hence the recently added iteration of
gsm_bts->paging.pending_requests should have checked whether bts is NULL. The
llist_head pending_requests is not initialized unless paging_init_if_needed()
has been called (and paging.bts is hence set). However, this fix is a safer way
to prevent errors like this in general.
The segfault was introduced by d382bf63e2b7e28fe41c5310c26fe584f0356897 /
If3f53d3bb66ad2dc02db823cb813590c6b59c700
Related: OS#2747
Change-Id: Idfafac4e2c0e0a241a62aecbbdc22be71febf840
|
|
According to the spec it's an empty 1-byte element reserved for future
extension but we still have to generate padding properly. Add stub
function similar to the used for SI2ter and adjust test output
accordingly.
Related: OS#2711
Change-Id: I3c278c57880a173df3c4648c9724339d23ce94fd
|
|
When the MSC has lost its state and issues a RESET, we should not only
clear all ongoing radio connections, but we should also stop any paging.
There's no point in paging a subscriber if the MSC doesn't know about
this paging anymore.
Change-Id: If3f53d3bb66ad2dc02db823cb813590c6b59c700
Closes: OS#2736
|
|
The call-back was needed inside the NITB to determine which part (CC,
SMS, ...) had triggered a given paging. A pure BSC doesn't need that
feature, so let's get rid of it.
The 'void *cbfn_data' is replaced with a 'struct bsc_msc_data *', as
all callers use it with that type.
Change-Id: I8839e8338d3ad1a91b41e687e8412fcdca3fd9ab
|
|
This was created during code review towards some upcoming fix for
OS#2736. However, it's not really related to that.
Change-Id: I68d4fc8baaedd1d64cd628b2441c57ebc64ecebc
|
|
Previously we simply omitted SI2ter Rest Octets which is spec violation
which lead to 'Malformed Packet' error in Wireshark RSL dissector. Fix
this by generating empty 'no rest octets' with proper padding. Adjust
test output accordingly.
Change-Id: Ie4419aaaf93a462f501f8d8f7bf2677d37c58f94
Fixes: OS#2711
|
|
* check GPRS state: if GPRS is enabled for the BTS but NSE, CELL or both
NSVC are locked than report it as degraded
* check TRX usability: use already available function to check that TRX
is actually usable when reporting OML status via CTRL
* fix tests linking: libbsc is using gsm48_create_mm_serv_rej() which is
defined in libcommon-cs but neither libbsc itself nor tests using it
are actually linked against libcommon-cs
Related: OS#2486
Change-Id: I9dce1d3b0cabe149a90cfca58a3fe55f8d6a72bc
|
|
We used to have a lot of counters only globlly per BSC, but they're
much more useful on a per-BTS level.
Change-Id: I954b9dda72b83b91d46a934c221a8b3375743599
|
|
authentication (optional|required) is no longer needed, the
related decisions are now made in the HLR.
Change-Id: Ib6c6331cc86004c4862067031e4fcb12a6975b63
|
|
Use new #pragma style instead of #ifndef dance.
Forward-declare all structs we're using pointers of.
Move function comments to their definitions in the .c file.
Change-Id: I3d43ec01897c0ef9eaf506e68d5a1ec1977f70ea
|
|
Constify in- and output arguments for Parse Attribute Response Info chain to
avoid compiler warnings, and more clearly indicate const data in the first
place.
Change-Id: Ib7d069fe1fda69e89dfd171cd76b1ed6d6db0ceb
|
|
Change-Id: I840b0cd8ee3e7c521e7c9053a992deeb9ec22ff4
|
|
* change return type to bool
* constify parameters
The nm_is_running(), trx_is_usable() and ts_is_usable() always return
boolean value and are always used as such anyway. The also do not change
their parameters.
Change-Id: I6a572fc78371c69f5308edbad0ebe15e143d0505
|
|
Change-Id: I7a4374c3619cb83ef8beef594281f887d9fbf70a
|
|
Change-Id: I7089062285c40ec11af479c98b43d1d407397c82
|
|
Authentication is no longer done in the BSC, the variables that
set the authentication policy and the IMSI regex have no longer
any effect.
Remove auth policy and authorized-regexp
Change-Id: Ie31b921b5fd0af5501ec0c77c0f08089c10075e2
|
|
Report state as degraded if BTS or any of its TRX are administratively
locked.
Change-Id: Ic9ee998d972ca870ce5d039c3ed95edb6ba8b36f
Related: OS#2486
|
|
In state prior to this patch, "3G Early Classmark Sending Restriction"
bit in SI3 rest octets was always set to H, which is a sane default as
the policy to send the information is then controlled by "Early
Classmark Sending Control" bit in the same octet.
However, it seems Quortus SoftCore can have some issues decoding the
option, so let's add a vty cmd to be able to disable it for those
having any issues.
Related: SYS#4021
Change-Id: Ic1afe071038a3bb5871d7ff40f665c8644f801ec
|
|
Change-Id: Ic0981fca96f4927717ca335be1dab00a5d17fd6c
|
|
src/libbsc/bsc_init.c: In function ‘rsl_si’:
src/libbsc/bsc_init.c:153:2: error: ‘rc’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
return rc;
^
Change-Id: Iedad1efcb477c77db8c741777ea076761658c7d1
|
|
To properly decide if a given OML link is degraded we have to use
BTS-specific information about MO state.
* move check function into BTS-specific part
* add generic wrapper
Related: OS#2486
Change-Id: Iddc7a4d20fbb95a6566eed1487a12733e5adb9e2
|
|
vty_install_default() and install_default() will soon be deprecated.
Depends: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
Change-Id: If2edf59a687a78d6db6bc73117a27509374b0fc6
|
|
unsigned long can be 32 bits on some arch/OS, while "current" field is
always 64 bit because it's a uint64_t.
Change-Id: Ibad1e4f09cf912cb654dbe3687a3f2182e2060f5
|
|
Related: OW#3893
Program terminated with signal SIGSEGV, Segmentation fault.
0 gsm_lchan_name (lchan=lchan@entry=0x0) at gsm_data_shared.c:342
(gdb) bt
0 gsm_lchan_name (lchan=lchan@entry=0x0) at gsm_data_shared.c:342
1 0x0805ab80 in lchan_release (lchan=0x0, sacch_deact=sacch_deact@entry=0, mode=mode@entry=RSL_REL_LOCAL_END)
at chan_alloc.c:410
2 0x0805c1dd in handle_ass_fail (msg=0x94142b8, conn=0x9251048) at bsc_api.c:459
3 dispatch_dtap (msg=0x94142b8, link_id=0 '\000', conn=0x9251048) at bsc_api.c:598
4 gsm0408_rcvmsg (msg=msg@entry=0x94142b8, link_id=0 '\000') at bsc_api.c:658
5 0x08058ca2 in abis_rsl_rx_rll (msg=0x94142b8) at abis_rsl.c:1686
6 abis_rsl_rcvmsg (msg=0x94142b8) at abis_rsl.c:2097
7 0xb7e8cf9a in handle_ts1_read (bfd=0x94e8e08) at input/ipaccess.c:271
8 ipaccess_fd_cb (bfd=0x94e8e08, what=1) at input/ipaccess.c:386
9 0xb7ee8434 in osmo_select_main (polling=polling@entry=0) at select.c:158
10 0x0804bd7c in main (argc=6, argv=0xbfc27144) at osmo_bsc_main.c:272
(gdb) print lchan
$2 = (const struct gsm_lchan *) 0x0
Possible scenario in which this crash can appear:
1- gsm0808_assign_req() calls handle_new_assignment() which sends an CHAN
ACTIVATE msg and arms T10 timer.
2- ACTIVATE ACK is received (handle_chan_ack), which calls
gsm48_send_rr_ass_cmd() which sends an ASSIGNMENT CMD, and doesn't
disable/modify T10 timer.
3- T10 timeout is triggered (assignment_t10_timeout()), which sets
conn->secondary_lchan = NULL
4- Immediately after, the ASSIGNMENT FAILURE message (which might have been
already queued) is processed in handle_ass_fail, and then the crash occurs.
This race condition is not an issue for handle_ass_compl() path because there's
this check there which would trigger most probably if secondary_lchan is NULL:
"if (conn->secondary_lchan != msg->lchan)"
Change-Id: I3798b36c628f75d4e8bc7b0996c27d695d53fbb1
|
|
Previously if we ran out of space while adding EARFCN, we simply return
which might result in malformed SI2q. Fix it by proper rollback of
entire EARFCN. While at it, let's be paranoid and introduce extra checks
against integer overflow in budget calculations.
Change-Id: I4b2aa3825e9affb6dfeadecdf24dd1a43a92b7b7
Related: OS#2357
|
|
Expose OML link uptime available via vts's "sh bts 0" command with the
new "bts.0.oml-uptime" ctrl command. To avoid code duplication, move
uptime computation into separate function and use it for both.
Change-Id: Iec405aa949d6a38a9c8e64cd7ee4b49fd416835d
Related: OS#2486
|
|
* fix insert routine to keep the list sorted by UARFCN
* fix rest octets generator to properly account for offset
* adjust test results accordingly
Change-Id: I443c5c5f937b490578354f3c8a0c5b92629f2794
Related: OS#2357
|
|
OML link state is available via vty ("sh bts 0" command) and
ctrl ("oml-connection-state" RO variable).
When showing OML link state, take into consideration RSL link state as
well: if OML is up but RSL is missing show it as degraded.
That's implemented via BTS model-specific functions (currently Sysmo- and
Nano- BTS only)
Change-Id: I5952fc59e4d82e0aa627ad91d20f964d9559a4c4
Related: OS#2486
|
|
* expand comments, fix typos
* constify parameter
* move try-add-adjust routine into separate function to facilitate
further modifications
* remove excessive checks and unnecessary return values
* move (UARFCN, Scrambling Code) tuple uniqueness check into separate
function and use it early
Change-Id: Ia72f848dec40723510ca56868e08081804227d47
Related: OS#2357
|
|
In masurement reports sent by the MS, this can then be used to correlate
if a given measurement report was in response to a BCCH/neighbor list
received on BCCH (SI2xxx) or on dowlink SACCH (SI5xxx).
Closes: OS#2525
Change-Id: I1cd0dc51026dcd0e508e63eea4e333e6b184787a
|
|
Change-Id: I5afc6e6a5a1d6b6a8ee73fdb60cc28074cf8585b
|
|
Save the time when OML link to BTS was established and show it in
vty. That's useful when troubleshooting issues like periodic/sporadic
BTS restart.
Related: SYS#3889
Change-Id: I9e4e8504afe8ca467b68d41826f61654e24d9600
|
|
* drop unused header
* fix name of jenkins test
* remove dead code
Change-Id: I986904864741995910b6ba92173b9f7b1b03e2f1
|
|
Previously we've used function so debug print always pointed to the same
place which is not very useful. Wrap it with macro so proper
file:line is printed. Also, make sure that we always change state only
through this wrapper and log only when the state has changed.
Change-Id: I21789f8021290965b61a54a2b23177ccbbfe8321
|
|
According to 3GPP TS 44.018 §1.8 the "network shall never enable PBCCH
and PCCCH".
Change-Id: I319e71a4b0c682361529e9c21377398a826b934b
Related: OS#2400
|
|
* log administrative state transitions
* log what's caused it
* while at it, mark boolean variable as such
Change-Id: I3e25a19fac4d0b4886d825c9876771b1f66efe58
Related: SYS#3864
|
|
Change-Id: I39e7b882caa98334636d19ccd104fd83d07d5055
|