Age | Commit message (Collapse) | Author | Files | Lines |
|
This is a big patch that ports openBSC over libosmo-abis.
Sorry, the changes that are included here are all dependent
of libosmo-abis, splitting them into smaller pieces would
leave the repository in some intermediate state, which is
not desired.
The main changes are:
- The directory libabis/ has been removed as it now lives in
libosmo-abis.
- new configuration file format for nanoBTS and HSL femto, we
need to define the virtual e1_line and attach it to the OML
link.
- all the existing BTS drivers (nanoBTS, hsl femto, Nokia site,
BS11 and rbs2000) now use the new libosmo-abis framework.
- use r232 input driver available in libosmo-abis for bs11_config.
- use ipa_msg_recv instead of old ipaccess_read_msg function.
- delete definition of gsm_e1_subslot and input_signal_data.
These structures now lives in libosmo-abis.
Most of this patch are deletions of libabis/ which has been
moved to libosmo-abis.
This patch also modifies openBSC to use all the new definitions
available in libosmocore and libosmo-abis. In order to do that,
we have replaced the following:
- DINP, DMI, DMIB and DMUX by their respective DL* correspondences.
- SS_GLOBAL by SS_L_GLOBAL
- SS_INPUT by SS_L_INPUT
- S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN
- SS_INPUT by SS_L_INPUT
- S_INP_* by S_L_INP_* sub-signals
- E1INP_NODE by L_E1INP_NODE vty node
This patch has been tested with:
- one nanoBTS
- the HSL femto with the examples available under libosmo-abis
- BS11 with both dahdi and misdn drivers.
|
|
|
|
|
|
|
|
|
|
|
|
There is a dedicated msc_signal_data cast the signal_data to
this type and enjoy working connection closing on a per MSC base.
|
|
When the BSC is refusing to open an outgoing connection the SCCP
connection was leaked. Use the normal free as the socket should
be either closed or disconnected.
|
|
We had the rf_ctrl_name and the rf_ctl pointer, make both use
the word ctrl.
|
|
The osmo_daemonize moved from process.h to application.h (that
is already included), remove the process.h include.
|
|
this avoids us to copy+paste external declarations over all 'main'
files.
|
|
This was required due to master diverging from where controlif
had last branched off.
|
|
* net.location to get/set the geographical location of the network
format is <tstamp>,<lat>,<lon>,<height>
* per trx rf_locked command (net.bts0.trx0.rf_locked)
* network-wide rf_locked command (net.rf_locked)
|
|
This patch initializes libctrl to listen for connections on port 4249.
Additionally, control messages arriving from the nat will also be
processed.
|
|
|
|
due to a missing return statement, we ran into the 'reject' case
of bssmap_handle_cipher_mode(). Due to another bug in libosmocore,
the reject message was corrupted (fixed in libosmocore commit
0c83670a595a278b7d1fb7b21b2eacab84d3c031)
|
|
|
|
* the DEBUG level will print hex-dumps of messages
* all other messages are INFO or higher
* print human-readable name of BSSMAP message types
|
|
This allows human-readable printing of message types on the A interface.
|
|
|
|
|
|
The daemons set up nanoBTS and HSL femto sockets by default, ie. the
three sockets to support these two drivers are open even if we have
no BTS of that kind.
This patch enables on-demand socket creation, ie. we only enable them
if we have one BTS at least that requires it.
I added two new attributes to the gsm_bts object, they are:
* the start() function includes the code that we need to run to start
the BTS. This new function contains the socket creation in the
particular case of nanoBTS and HSL femto.
* the started boolean, which is used to know if we have already
started the BTS, ie. we have already invoked start().
Note that, I have splitted the bts_model_*_init() function into two
functions, the _init() functions that register the BTS driver
and the _start() functions that start BTS driver on-demand.
While I was at it, I added several changes/cleanups to this patch:
* Group all bts_model_*_init() calls into one function bts_init(),
which is called in the initialization path of osmo-nitb and
osmo-bsc.
* Add openbsc/bss.h that contains the declaration of
bsc_bootstrap_network, bsc_shutdown_net and bts_init.
* Add missing e1inp_init() in osmo-bsc.
* Fix missing declaration of hsl_setup in openbsc/e1_input.h
|
|
Use the libosmocore code to ignore certain signals by
default (e.g. SIGHUP, SIGPIPE) and use the new code to
create a default stderr logging target and initialize
it properly.
|
|
Summary of changes:
s/bcd2char/osmo_bcd2char/g
s/char2bcd/osmo_char2bcd/g
s/hexparse/osmo_hexparse/g
s/hexdump/osmo_hexdump/g
s/hexdump_nospc/osmo_hexdump_nospc/g
s/ubit_dump/osmo_ubit_dump/g
s/static_assert/osmo_static_assert/g
|
|
Summary of changes:
s/struct write_queue/struct osmo_wqueue/g
s/write_queue_init/osmo_wqueue_init/g
s/write_queue_clear/osmo_wqueue_clear/g
s/write_queue_enqueue/osmo_wqueue_enqueue/g
s/write_queue_bfd_cb/osmo_wqueue_bfd_cb/g
|
|
Summary of changes:
s/signal_cbfn/osmo_signal_cbfn/g
s/register_signal_handler/osmo_signal_register_handler/g
s/unregister_signal_handler/osmo_signal_unregister_handler/g
s/dispatch_signal/osmo_signal_dispatch/g
|
|
Summary of changes:
s/struct bsc_fd/struct osmo_fd/g
s/bsc_register_fd/osmo_fd_register/g
s/bsc_unregister_fd/osmo_fd_unregister/g
s/bsc_select_main/osmo_select_main/g
|
|
Summary of changes:
s/struct timer_list/struct osmo_timer_list/g
s/bsc_add_timer/osmo_timer_add/g
s/bsc_schedule_timer/osmo_timer_schedule/g
s/bsc_del_timer/osmo_timer_del/g
s/bsc_timer_pending/osmo_timer_pending/g
s/bsc_nearest_timer/osmo_timers_nearest/g
s/bsc_prepare_timers/osmo_timers_prepare/g
s/bsc_update_timers/osmo_timers_update/g
s/bsc_timer_check/osmo_timers_check/g
|
|
|
|
Be able to configure a list of destinations (duplicates allowed)
that will be tried in a round robin fashion. The change is in
the bsc_msc_connection to operate on a list. We achieve the
round robin nature with the same trick used in the paging code
to delete and append the current entry. The nat code was updated
to compile but one can only configure one destination.
|
|
Right now the code assumes that any request coming
from the NAT is a query and the code responds to with
a list of configured LACs.
|
|
Start using the new Osmo Extension header and forward MGCP
to the MGCP GW.
|
|
The 'P' code was not present in the getopt call anyway.
|
|
|
|
Make it possible to specify the rf-socket path via the
vty configuration as well. The command line setting will
override it though.
|
|
Fix a compiler warning about the drop_oml command.
|
|
The VTY code calls the write function for nodes in the order of
registration of the node and not in terms of hierachy of nodes. This
means that the e1_input code is written before the MSC node that
was the child of the network. Make the MSC_NODE a direct descendant
of the CONFIG_NODE and avoid this issue.
|
|
Fix the indention of codec-list, bsc-welcome-text, mid-call-text
and the mid-call-timeout. Fix the name of the codec-list in the
write method.
|
|
The last patch changed the osmocore include paths, this fixes some build
problems caused by it
|
|
libosmogsm is a new library that is distributed in the libosmocore.
Now, openbsc depends on it. This patch gets openbsc with this
change.
This patch also rewrites all include path to the new
osmocom/[gsm|core]
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
|
|
This change is required to finish the integration of the VTY and
the per-application logging categories that provides:
"vty: integration with logging framework"
in libosmocore.
It has been tested with osmo-nitb. The other just compiled tested.
|
|
|
|
... and make sure tests work again after restructuring
|
|
The new structure divides the code into a number of libraries
for the BSC core functionality, MSC core functionality, Abis transport,
TRAU and other bits.
This doesn't introduce any functional code change but simply moves
around files and alters Makefile.am accordingly.
Next step would be to disentangle a lot of the inter-library
dependencies and make the individual bits of code more independent.
|