Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
This library is intended to collect all generic/common funcitionality
of all Osmocom.org projects, including OpenBSC but also OsmocomBB
The library currently includes the following modules:
bitvec, comp128, gsm_utils, msgb, select, signal, statistics, talloc, timer,
tlv_parse, linuxlist
msgb allocation error debugging had to be temporarily disabled as it depends on
'debug.c' functionality which at the moment remains in OpenBSC
|
|
In 39315c47989326275823d1589425ee62d15bc823 we introduced
per-bts OML attribute parser definitions and disallowed
a BTS of type unknown.
However, the VTY code first allocates a BTS with unknown type.
|
|
Some NM attributes are defined differently depending on
the BTS type. Having one big nm_att_tlvdef[] table for
all BTS types is no longer sufficient. This patch
* introduces 'struct gsm_bts_model' to describe a BTS model
* adds definitions of gsm_bts_model for BS-11 and nanoBTS
* changes the abis_nm_tlv_parse() function: include a bts pointer
|
|
|
|
Currently starting with the opencfg.cfg.nanobts and writing it out
and then trying to start again will not work. The network reject_cause
is initialized to 0 which is not a valid reject reason and when writing
this to the config file and trying to parse it will fail.
Pick roaming not allowed as a harmless option to those phones
accidently trying to connect to the BTS.
|
|
* On start the vty code will call the abis_nm method and this
will set the administrative state to unlock/lock
* During startup the BTS will report its state as well and would
possible overwrite the set administrative. We are only going
to update the administrative if it was 0 before. This appears
to work on all of my tests. In case this will not be the case
for others we will have to split the administrative into two
sets one for the BTS and one for the BSC.
|
|
|
|
Also, use this new function to dump lchan state on VTY and to
improve readability of RSL log messages.
|
|
|
|
In many cases we actually want a name / unique ID for the lchan,
not just for the on-air timeslot... especially in SDCCH/8 case,
where 8 SDCCHs share one timeslot...
|
|
|
|
this makes bsc_mgcp and ipaccess-proxy compile again
|
|
|
|
This has the advantage that counters can be added all over the code
very easily, while having only one routine that stores all of the
current counter values to the database. The counters are synced
every 60 seconds, providing relatively fine grained statistics
about the network usage as time passes by.
|
|
Tweaking theses can be useful especially tx-integer that influence
both the spread of rach attemps and the delay between two attemps.
Looking up GSM 04.08 3.3.1.1.2 & 10.5.2.29 can help determine good
values. The default are choosed with a wide spacing between attemps
(tx integer = 9 -> T=12 & S=217 (non-combined CCCH/SDCCH) or 115 (for
combined CCCH/SDCCH)). This alleviates the problem of responding to
several RACH attempts by a same MS, allocating several RF channels when
only 1 is needed.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
This implements the handover algorithm (and associated parameters)
as described in Chapter 8 of the book "Performance Enhancements in
a Frequency |Hopping GSM Network" by Thomas Toftegard Nielsen and Jeroen
Wigard.
The parameters such as averaging windows are configured in struct
gsm_network. We keep some state to trakc up to 10 neighbors as
they are being reported from the MS.
This has so far only been tested in a network with two BTS that
have each other as neighbor. Networks with morge neighbors might
encounter bugs.
|
|
|
|
When looking for the gsm_bts of a neighbor cell, use BSIC and ARFCN
tuple rather than just ARFCN for better identification purpose.
|
|
We will need this for the actual handover algorithm implementation, as we will
only know the current BTS and the BCCH ARFCN of the strongest cell in the
measurement reports. Using this new function, we can resolve the matching
gsm_bts.
|
|
We use a 1024-bit-sized bitvec to generate the BA and neighbor frequency list.
This bitvec is still generated from the list of all BTS's inside the BSC, but
this patch is the first step to generalize this, i.e. generate arbitrary
neighbor lists.
|
|
We now support different RRLP modes (including "none" to disable RRLP),
you can configure it via "rrlp mode" in the "network" section of
openbsc.cfg.
|
|
allow setting of 'cell reselection hysteresis' and 'rxlev access min' from VTY
for experiments with cell reselection.
|
|
Without those default values, old config files will no longer work
after commit 23975e718fd456ff8be7effbb915903f1bc173be
|
|
- Make sure that on runtime the Radio Carrier can be
locked and unlocked. The vty code calls into the
Abis NM to lock/unlock the channel and the state is
stored there.
- Make sure that on start the Radio Carries remains
offline and we are not starting it. On start the
radio carrier is either locked or unlocked. This means
the RSL will not connect until the RF is unlocked. It
will connect then. To see RSL bringup failures one
needs to parse the RSL nack message.
- When the TRX is locked on startup the RSL link will
only be established after it will be unlocked.
|
|
|
|
|
|
- Improved handling of extension-number string (as per review)
- Guard against a buffer-overflow if mobile sends a too-long USSD
- declare some function-parameters const
- fix gsm_ts_name function to display the right BTS number (bts->nr rather than bts->bts_nr)
|
|
GPRS needs PDCH (Packet Data Channels), and we need support in
our data model as well as OML and RSL for it
|
|
Supporting GPRS means we have a number of additional OML objects to
deal with. We need to extend our gsm_bts structure to at least
include the nm_state for each of those objects.
|
|
Add support for 1900 nanoBTS by using unified bts_type
GSM_BTS_TYPE_NANOBTS for 900, 1800 and 1900 versions.
Reduce the nanoBTS enum values to one and derive the
version from the user supplied band. In the future we
might want to do auto band detection.
The configuration file needs to be changed to refer
to nanobts instead of nanobts900/nanobts1800.
Signed-off-by: Mike Haben <michael.haben@btinternet.com>
Signed-off-by: Holger Hans Peter Freyther <zecke@selfish.org>
|
|
We are using LAC=0 for remembering that a GSM subscriber is
detached. I recently added code to gsm_bts_by_lac that will
return every BTS in case the lac is 0. Harald highlightes
that we would now search for detached subscribers at every
BTS of our network which is clearly not what we want.
Introduce two defines for the two reserved LAC, add a
pointer to the specification, check that our config files
do not contain these reserved values, use the define
and change gsm_bts_by_lac to use the other define.
|
|
For the on-waves.com MSC case we want to page every BTS reached
of the network. Our gsm_subscriber entry does not have a LAC
entry set and defaults to zero. Use the reserved 0x0000 to
indicate that we want to use every bts in the network.
This will influence the paging code to start and stop paging.
|
|
|
|
this is not being used yet
|
|
this was missing from commit a08a9acdb6bff0ee4fdf0f58b78b6525017a1f9f
|
|
|
|
|
|
|
|
|
|
This makes it much easier to do run-time configuration using the vty
interface.
|
|
* add bts->band field plus corresponding VTY and commandline argument
* add trx->nominal_power and trx->max_power_red fields
* add rsl_chan_bs_power_ctrl() to control TRX RF power for a given TS
* add rsl_chan_ms_power_ctrl() to control MS RF power for a given lchan.
|
|
|
|
|
|
This is Harald's reworked MNCC base, slowly heading towards integration
into master. The key changes are:
* provide much more structure to the data in gsm_mncc
* encode_* and decode_* functions now take a structure rather than tons
of individual arguments (whose order nobody can remember)
* make sure we don't have copies of the same code everywhere by introducing
mncc_set_cause() and mncc_release_ind()
* save horizontal screen space if possible
* make sure we break lines > 80 characters
|
|
|