Age | Commit message (Collapse) | Author | Files | Lines |
|
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
|
|
Adds a basic version of a pcu socket interface, similar
to the one that can be found in osmo-bts.
Change-Id: Ib13cb4099d12fa71e9e0b8727e19ab29e11909b2
|
|
In a future commit, gsm_subscriber will be replaced by vlr_subscr, and it will
not make sense to use vlr_subscr in libbsc. Thus we need a dedicated BSC
subscriber: struct bsc_subscr.
Add rf_policy arg to bsc_grace_paging_request() because the bsc_subscr will no
longer have a backpointer to gsm_network (used to be via subscr->group).
Create a separate logging filter for the new BSC subscriber. The implementation
of adjusting the filter context is added in libbsc to not introduce
bsc_subscr_get/_put() dependencies to libcommon.
During Paging Response, fetch a bsc_subscr from the mobile identity, like we do
for the gsm_subscriber. It looks like a duplication now, but will make sense
for the VLR as well as for future MSC split patches.
Naming: it was requested to not name the new struct bsc_sub, because 'sub' is
too ambiguous. At the same time it would be fine to have 'bsc_sub_' as function
prefix. Instead of struct bsc_subscriber and bsc_sub_ prefix, I decided to
match both up as struct bsc_subscr and bsc_subscr_ function prefix. It's fast
to type, relatively short, unambiguous, and the naming is consistent.
Add bsc_subscr unit test.
Related: OS#1592, OS#1594
Change-Id: Ia61cc00e8bb186b976939a4fc8f7cf9ce6aa3d8e
|
|
Change-Id: I9601d478763569933bcc46bf4eaaff70a9843be9
|
|
The LCHAN and BTS filter contexts are actually never used, so drop them until
someone adds them properly.
For now use only LOGGING_{FILTER,CTX}_VLR_SUBSCR. Some of these will change to
_BSC_SUBSCR once struct bsc_subscriber is introduced, and later on, struct
gsm_subscriber will be replaced by vlr_subscriber so that the names will match.
Depends: libosmocore change-id I5c343630020f4b108099696fd96c2111614c8067
Change-Id: Ifa82f6a461ad4c0eeddb8a38fb3833460432d16b
|
|
- Edit previously committed V.42bis implementation to function
outside IAXmodem.
- Add unit test to verify the correct function of V.42bis
Change-Id: I689413f2541b6def0625ce6bd96f1f488f05f99d
|
|
The previously pushed slhc implementation has been modified to compile
and function outside of the kernel. Also debug log messages were added
and datatypes ware matched. The implementation is now ready to be used
Change-Id: I7a638e88a43b3eb9d006751a03ef2570e36613f0
|
|
Change-Id: I4a3a8189564345700ea4825983ab39a8411227f4
|
|
Change-Id: I6132198ea86979e0ed84df32f2b7117feba497f2
|
|
First steps towards a new GTP hub. The aim is to mux GTP connections, so that
multiple SGSN <--> GGSN links can pass through a single point. Background:
allow having more than one SGSN, possibly in various remote locations.
The recent addition of OAP to GSUP is related to the same background idea.
(This is a collapsed patch of various changes that do not make sense to review
in chronological order anymore, since a lot of it has thorougly transmorphed
after it was first committed.)
Sponsored-by: On-Waves ehf
|
|
|
|
Move the "logging filter imsi IMSI" into the BTS/NITB code to
allow to set the gsm_subscriber and only compare it. This way
we simply compare the subscriber address and don't have to care
if the subscriber data is still valid.
|
|
|
|
|
|
|
|
This is a big patch that ports openBSC over libosmo-abis.
Sorry, the changes that are included here are all dependent
of libosmo-abis, splitting them into smaller pieces would
leave the repository in some intermediate state, which is
not desired.
The main changes are:
- The directory libabis/ has been removed as it now lives in
libosmo-abis.
- new configuration file format for nanoBTS and HSL femto, we
need to define the virtual e1_line and attach it to the OML
link.
- all the existing BTS drivers (nanoBTS, hsl femto, Nokia site,
BS11 and rbs2000) now use the new libosmo-abis framework.
- use r232 input driver available in libosmo-abis for bs11_config.
- use ipa_msg_recv instead of old ipaccess_read_msg function.
- delete definition of gsm_e1_subslot and input_signal_data.
These structures now lives in libosmo-abis.
Most of this patch are deletions of libabis/ which has been
moved to libosmo-abis.
This patch also modifies openBSC to use all the new definitions
available in libosmocore and libosmo-abis. In order to do that,
we have replaced the following:
- DINP, DMI, DMIB and DMUX by their respective DL* correspondences.
- SS_GLOBAL by SS_L_GLOBAL
- SS_INPUT by SS_L_INPUT
- S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN
- SS_INPUT by SS_L_INPUT
- S_INP_* by S_L_INP_* sub-signals
- E1INP_NODE by L_E1INP_NODE vty node
This patch has been tested with:
- one nanoBTS
- the HSL femto with the examples available under libosmo-abis
- BS11 with both dahdi and misdn drivers.
|
|
|
|
libosmogsm is a new library that is distributed in the libosmocore.
Now, openbsc depends on it. This patch gets openbsc with this
change.
This patch also rewrites all include path to the new
osmocom/[gsm|core]
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
|
|
|
|
|
|
Make log_set_nsvc_filter, log_set_bvc_filter take a non-const
parameter as we are going to assign it to a non-const pointer.
|
|
This also includes log filtering based on NSEI/BVCI tuple
|
|
|
|
|
|
|
|
|
|
This branch contains the partial SGSN/GGSN implementation that
was originally developed as part of the gprs branch.
|
|
The logging/debugging code is generic enough to move it into libosmocore
while keeping OpenBSC specific definitions in openbsc itself.
This commit uses the logging support present in libosmocore-0.1.2,
you will have to update your library to this version.
|
|
This library is intended to collect all generic/common funcitionality
of all Osmocom.org projects, including OpenBSC but also OsmocomBB
The library currently includes the following modules:
bitvec, comp128, gsm_utils, msgb, select, signal, statistics, talloc, timer,
tlv_parse, linuxlist
msgb allocation error debugging had to be temporarily disabled as it depends on
'debug.c' functionality which at the moment remains in OpenBSC
|
|
|
|
|
|
|
|
This is the new logging architecture, including
* support for multiuple logging targets like stderr and vty
* log levels in addition to categories/subsystems
* filtering based on imsi, i.e. only see events for one subscriber
* dynamically change log level for each category for each vty
|
|
This introduces a new LOGP() macro together with LOGL_* definition to
support multiple log levels (severities) throughout the codebase.
Please note that the actual logging system does not use them yet,
in this patch we simply introduce the new macros at the caller site.
|
|
With this commit, we can successfully hand over a channel from one cell to
another cell. We implement asynchronous intra-BSC (but inter-BTS) handover.
Changes:
* introduce new DHO log category
* extend rsl_chan_activate_lchan() with argument for HO reference
* introduce actual minimal handover decision making in handover_decision.c
* various fixes to bsc_handover_start() in handover_logic.c
|
|
|
|
|
|
|
|
Inform the compiler that the same rules as printf apply
to the debugp method. This will check if the arguments
match the format string.
|
|
This way it can be used from values coming TLVP_VAL.
|
|
disable it by default
|
|
|