diff options
Diffstat (limited to 'tests/osmo-bsc.vty')
| -rw-r--r-- | tests/osmo-bsc.vty | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/tests/osmo-bsc.vty b/tests/osmo-bsc.vty index 560fb3683..776b5ada6 100644 --- a/tests/osmo-bsc.vty +++ b/tests/osmo-bsc.vty @@ -1,5 +1,139 @@ OsmoBSC> enable +OsmoBSC# list +... + bts <0-255> trx <0-255> timeslot <0-7> sub-slot <0-7> modify (vamos|non-vamos) [tsc] [<1-4>] [<0-7>] +... + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 ? + activate Manual Channel Activation (e.g. for BER test) + activate-vamos Manual Channel Activation, in VAMOS mode + deactivate Manual Channel Deactivation (e.g. for BER test) + modify Manually send Channel Mode Modify (for debugging) + mdcx Modify RTP Connection + reassign-to Trigger Assignment to an unused lchan on the same cell + ms-power Manually force MS Uplink Power Level in dBm on the lchan (for testing) + handover Manually trigger handover (for debugging) + assignment Manually trigger assignment (for debugging) + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 modify ? + vamos Enable VAMOS channel mode + non-vamos Disable VAMOS channel mode + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 modify vamos ? + [tsc] Provide specific TSC Set and Training Sequence Code + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 modify vamos tsc ? + [<1-4>] TSC Set + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 modify vamos tsc 1 ? + [<0-7>] Training Sequence Code + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 modify vamos tsc 1 0 ? + <cr> + + +OsmoBSC# list +... + bts <0-255> trx <0-255> timeslot <0-7> (sub-slot|vamos-sub-slot) <0-7> (activate|activate-vamos) (hr|fr|efr|amr|sig) [<0-7>] + bts <0-255> trx <0-255> timeslot <0-7> (sub-slot|vamos-sub-slot) <0-7> deactivate +... + +OsmoBSC# bts? + bts BTS Specific Commands + +OsmoBSC# bts ? + <0-255> BTS Number + +OsmoBSC# bts 0 ? + unblock-setup-ramping Unblock and allow to configure a BTS if kept back by BTS ramping + resend-system-information Re-generate + re-send BCCH SYSTEM INFORMATION + resend-power-control-defaults Re-generate + re-send default MS/BS Power control parameters + c0-power-reduction BCCH carrier power reduction operation + trx TRX for manual command + oml Manipulate the OML managed objects + om2000 Manipulate the OM2000 managed objects + +OsmoBSC# bts 0 c0-power-reduction ? + <0-6> Power reduction value (in dB, even numbers only) + +OsmoBSC# bts 0 trx ? + <0-255> TRX Number + +OsmoBSC# bts 0 trx 0 ? + timeslot Timeslot for manual command + +OsmoBSC# bts 0 trx 0 timeslot ? + <0-7> Timeslot Number + +OsmoBSC# bts 0 trx 0 timeslot 0 ? + pdch Packet Data Channel + sub-slot Primary sub-slot + vamos-sub-slot VAMOS secondary shadow subslot, range <0-1>, only valid for TCH type timeslots + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot ? + <0-7> Sub-slot Number + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 ? + activate Manual Channel Activation (e.g. for BER test) + activate-vamos Manual Channel Activation, in VAMOS mode + deactivate Manual Channel Deactivation (e.g. for BER test) + modify Manually send Channel Mode Modify (for debugging) + mdcx Modify RTP Connection + reassign-to Trigger Assignment to an unused lchan on the same cell + ms-power Manually force MS Uplink Power Level in dBm on the lchan (for testing) + handover Manually trigger handover (for debugging) + assignment Manually trigger assignment (for debugging) + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 activate ? + hr Half-Rate v1 + fr Full-Rate + efr Enhanced Full Rate + amr Adaptive Multi-Rate + sig Signalling + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 activate fr ? + [<0-7>] AMR Mode + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 activate fr 0 ? + <cr> + +OsmoBSC# list +... + bts <0-255> trx <0-255> timeslot <0-7> (sub-slot|vamos-sub-slot) <0-7> reassign-to trx <0-255> timeslot <0-7> (sub-slot|vamos-sub-slot) <0-7> [tsc] [<1-4>] [<0-7>] +... + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 reassign-to ? + trx Target TRX + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 reassign-to trx ? + <0-255> TRX nr + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 reassign-to trx 0 ? + timeslot Target timeslot + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 reassign-to trx 0 timeslot ? + <0-7> timeslot nr + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 reassign-to trx 0 timeslot 0 ? + sub-slot Primary sub-slot + vamos-sub-slot VAMOS secondary shadow subslot, range <0-1>, only valid for TCH type timeslots + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 reassign-to trx 0 timeslot 0 vamos-sub-slot ? + <0-7> Sub-slot Number + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 reassign-to trx 0 timeslot 0 vamos-sub-slot 0 ? + [tsc] Provide specific TSC Set and Training Sequence Code + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 reassign-to trx 0 timeslot 0 vamos-sub-slot 0 tsc ? + [<1-4>] TSC Set + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 reassign-to trx 0 timeslot 0 vamos-sub-slot 0 tsc 1 ? + [<0-7>] Training Sequence Code + +OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 reassign-to trx 0 timeslot 0 vamos-sub-slot 0 tsc 1 0 ? + <cr> + OsmoBSC# configure terminal OsmoBSC(config)# network OsmoBSC(config-net)# list @@ -17,3 +151,138 @@ network meas-feed destination 127.0.0.23 4223 meas-feed scenario foo23 ... + + +OsmoBSC(config-net)# bts 0 + +OsmoBSC(config-net-bts)# list +... + channel allocator avoid-interference (0|1) +... + +OsmoBSC(config-net-bts)# channel? + channel Channel Allocator + +OsmoBSC(config-net-bts)# channel ? + allocator Channel Allocator + +OsmoBSC(config-net-bts)# channel allocator ? + mode Channel allocation mode + dynamic-param Parameters for dynamic channel allocation mode + avoid-interference Configure whether reported interference levels from RES IND are used in channel allocation + tch-signalling-policy Configure when TCH/H or TCH/F channels can be used to serve signalling if SDCCHs are exhausted + +OsmoBSC(config-net-bts)# channel allocator mode ? + set-all Set a single mode for all variants + chan-req Channel allocation for CHANNEL REQUEST (RACH) + assignment Channel allocation for assignment + handover Channel allocation for handover + +OsmoBSC(config-net-bts)# channel allocator mode set-all ? + ascending Allocate Timeslots and Transceivers in ascending order + descending Allocate Timeslots and Transceivers in descending order + +OsmoBSC(config-net-bts)# channel allocator mode handover ? + ascending Allocate Timeslots and Transceivers in ascending order + descending Allocate Timeslots and Transceivers in descending order + +OsmoBSC(config-net-bts)# channel allocator mode assignment ? + ascending Allocate Timeslots and Transceivers in ascending order + descending Allocate Timeslots and Transceivers in descending order + dynamic Dynamic lchan selection based on configured parameters + +OsmoBSC(config-net-bts)# channel allocator dynamic-param ? + sort-by-trx-power Whether to sort TRX instances by their respective power levels + ul-rxlev Uplink RxLev + c0-chan-load C0 (BCCH carrier) channel load + +OsmoBSC(config-net-bts)# channel allocator dynamic-param sort-by-trx-power ? + 0 Do not sort, use the same order as in the configuration file + 1 Sort TRX instances by their power levels in descending order + +OsmoBSC(config-net-bts)# channel allocator dynamic-param ul-rxlev thresh ? + <0-63> Uplink RxLev threshold +OsmoBSC(config-net-bts)# channel allocator dynamic-param ul-rxlev thresh 50 avg-num ? + <1-10> Minimum number of RxLev samples for averaging +OsmoBSC(config-net-bts)# channel allocator dynamic-param c0-chan-load thresh ? + <0-100> Channel load threshold (in %) + +OsmoBSC(config-net-bts)# channel allocator avoid-interference ? + 0 Ignore interference levels (default). Always assign lchans in a deterministic order. + 1 In channel allocation, prefer lchans with less interference. + +OsmoBSC(config-net-bts)# channel allocator tch-signalling-policy ? + never Never allow TCH for signalling purposes + emergency Only allow TCH for signalling purposes when establishing an emergency call + voice Allow TCH for signalling purposes when establishing any voice call + always Always allow TCH for signalling purposes (default) + +OsmoBSC(config-net-bts)# show running-config +... !channel allocator avoid-interference +OsmoBSC(config-net-bts)# channel allocator avoid-interference 1 +OsmoBSC(config-net-bts)# show running-config +... + bts 0 +... + channel allocator avoid-interference 1 +... + +OsmoBSC(config-net-bts)# channel allocator avoid-interference 0 +OsmoBSC(config-net-bts)# show running-config +... !channel allocator avoid-interference + +OsmoBSC(config-net-bts)# show running-config +... !channel allocator tch-signalling-policy +OsmoBSC(config-net-bts)# channel allocator tch-signalling-policy never +OsmoBSC(config-net-bts)# show running-config +... + bts 0 +... + channel allocator tch-signalling-policy never +... + +OsmoBSC(config-net-bts)# channel allocator tch-signalling-policy emergency +OsmoBSC(config-net-bts)# show running-config +... + bts 0 +... + channel allocator tch-signalling-policy emergency +... + +OsmoBSC(config-net-bts)# channel allocator tch-signalling-policy voice +OsmoBSC(config-net-bts)# show running-config +... + bts 0 +... + channel allocator tch-signalling-policy voice +... + +OsmoBSC(config-net-bts)# channel allocator tch-signalling-policy always +OsmoBSC(config-net-bts)# show running-config +... !channel allocator tch-signalling-policy + +OsmoBSC(config-net-bts)# immediate-assignment? + immediate-assignment Configure time of Immediate Assignment after ChanRqd RACH (Abis optimization) +OsmoBSC(config-net-bts)# immediate-assignment ? + post-chan-ack Send the Immediate Assignment after the Channel Activation ACK (normal sequence) + pre-chan-ack Send the Immediate Assignment directly after Channel Activation (early), without waiting for the ACK; This may help with double allocations on high latency Abis links + pre-ts-ack EXPERIMENTAL: If a dynamic timeslot switch is necessary, send the Immediate Assignment even before the timeslot is switched, i.e. even before the Channel Activation is sent (very early) +OsmoBSC(config-net-bts)# show running-config +... !immediate-assignment +OsmoBSC(config-net-bts)# immediate-assignment pre-chan-ack +OsmoBSC(config-net-bts)# show running-config +... + bts 0 +... + immediate-assignment pre-chan-ack +... +OsmoBSC(config-net-bts)# immediate-assignment pre-ts-ack +OsmoBSC(config-net-bts)# show running-config +... + bts 0 +... + immediate-assignment pre-ts-ack +... +OsmoBSC(config-net-bts)# immediate-assignment post-chan-ack +OsmoBSC(config-net-bts)# show running-config +... !immediate-assignment |