diff options
Diffstat (limited to 'openbsc/doc/examples')
21 files changed, 0 insertions, 1504 deletions
diff --git a/openbsc/doc/examples/Makefile.am b/openbsc/doc/examples/Makefile.am deleted file mode 100644 index 530c3fa8f..000000000 --- a/openbsc/doc/examples/Makefile.am +++ /dev/null @@ -1,22 +0,0 @@ -CFG_FILES = find $(srcdir) -name '*.cfg*' | sed -e 's,^$(srcdir),,' - -dist-hook: - for f in $$($(CFG_FILES)); do \ - j="$(distdir)/$$f" && \ - mkdir -p "$$(dirname $$j)" && \ - $(INSTALL_DATA) $(srcdir)/$$f $$j; \ - done - -install-data-hook: - for f in $$($(CFG_FILES)); do \ - j="$(DESTDIR)$(docdir)/examples/$$f" && \ - mkdir -p "$$(dirname $$j)" && \ - $(INSTALL_DATA) $(srcdir)/$$f $$j; \ - done - -uninstall-hook: - @$(PRE_UNINSTALL) - for f in $$($(CFG_FILES)); do \ - j="$(DESTDIR)$(docdir)/examples/$$f" && \ - $(RM) $$j; \ - done diff --git a/openbsc/doc/examples/osmo-bsc/osmo-bsc.cfg b/openbsc/doc/examples/osmo-bsc/osmo-bsc.cfg deleted file mode 100644 index 56e47243b..000000000 --- a/openbsc/doc/examples/osmo-bsc/osmo-bsc.cfg +++ /dev/null @@ -1,106 +0,0 @@ -! -! OsmoBSC (0.9.14+gitr1+3d331c0062bb0c9694dbd4d1eab7adc58138c3ae) configuration saved from vty -!! -password foo -! -! -line vty - no login -! -e1_input - e1_line 0 driver ipa -network - network country code 1 - mobile network code 1 - short name OsmoBSC - long name OsmoBSC - auth policy closed - location updating reject cause 13 - encryption a5 0 - neci 1 - paging any use tch 0 - rrlp mode none - mm info 1 - handover 0 - handover window rxlev averaging 10 - handover window rxqual averaging 1 - handover window rxlev neighbor averaging 10 - handover power budget interval 6 - handover power budget hysteresis 3 - handover maximum distance 9999 - timer t3101 10 - timer t3103 0 - timer t3105 0 - timer t3107 0 - timer t3109 0 - timer t3111 0 - timer t3113 60 - timer t3115 0 - timer t3117 0 - timer t3119 0 - timer t3122 0 - timer t3141 0 - subscriber-keep-in-ram 0 - bts 0 - type nanobts - band DCS1800 - cell_identity 0 - location_area_code 1 - training_sequence_code 7 - base_station_id_code 63 - ms max power 15 - cell reselection hysteresis 4 - rxlev access min 0 - channel allocator ascending - rach tx integer 9 - rach max transmission 7 - dtx uplink force - dtx downlink - ip.access unit_id 0 0 - oml ip.access stream_id 255 line 0 - neighbor-list mode manual-si5 - neighbor-list add arfcn 100 - neighbor-list add arfcn 200 - si5 neighbor-list add arfcn 10 - si5 neighbor-list add arfcn 20 - gprs mode none - trx 0 - rf_locked 0 - arfcn 871 - nominal power 23 - max_power_red 20 - rsl e1 tei 0 - timeslot 0 - phys_chan_config CCCH+SDCCH4 - hopping enabled 0 - timeslot 1 - phys_chan_config TCH/F - hopping enabled 0 - timeslot 2 - phys_chan_config TCH/F - hopping enabled 0 - timeslot 3 - phys_chan_config TCH/F - hopping enabled 0 - timeslot 4 - phys_chan_config TCH/F - hopping enabled 0 - timeslot 5 - phys_chan_config TCH/F - hopping enabled 0 - timeslot 6 - phys_chan_config TCH/F - hopping enabled 0 - timeslot 7 - phys_chan_config TCH/F - hopping enabled 0 -msc - ip.access rtp-base 4000 - timeout-ping 20 - timeout-pong 5 - dest 192.168.100.11 6666 0 - access-list-name msc-list - no access-list-name -bsc - no access-list-name - access-list-name bsc-list diff --git a/openbsc/doc/examples/osmo-bsc_mgcp/mgcp.cfg b/openbsc/doc/examples/osmo-bsc_mgcp/mgcp.cfg deleted file mode 100644 index 791497f84..000000000 --- a/openbsc/doc/examples/osmo-bsc_mgcp/mgcp.cfg +++ /dev/null @@ -1,19 +0,0 @@ -! -! MGCP configuration hand edited -! ! -password foo -! -line vty - no login -! -mgcp -! local ip 213.167.134.14 - bts ip 172.16.252.43 - bind ip 127.0.0.1 - bind port 2427 - rtp base 4000 - rtp force-ptime 20 - sdp audio payload number 98 - sdp audio payload name AMR/8000 - number endpoints 31 - loop 1 diff --git a/openbsc/doc/examples/osmo-bsc_nat/black-list.cfg b/openbsc/doc/examples/osmo-bsc_nat/black-list.cfg deleted file mode 100644 index d36179d37..000000000 --- a/openbsc/doc/examples/osmo-bsc_nat/black-list.cfg +++ /dev/null @@ -1 +0,0 @@ -678012512671923:6:6: diff --git a/openbsc/doc/examples/osmo-bsc_nat/bscs.config b/openbsc/doc/examples/osmo-bsc_nat/bscs.config deleted file mode 100644 index 176debe42..000000000 --- a/openbsc/doc/examples/osmo-bsc_nat/bscs.config +++ /dev/null @@ -1,13 +0,0 @@ -nat - bsc 0 - token lol - location_area_code 1234 - description bsc - max-endpoints 32 - paging forbidden 0 - bsc 1 - token wat - location_area_code 5678 - description bsc - max-endpoints 32 - paging forbidden 0 diff --git a/openbsc/doc/examples/osmo-bsc_nat/osmo-bsc_nat.cfg b/openbsc/doc/examples/osmo-bsc_nat/osmo-bsc_nat.cfg deleted file mode 100644 index 6b48e970e..000000000 --- a/openbsc/doc/examples/osmo-bsc_nat/osmo-bsc_nat.cfg +++ /dev/null @@ -1,66 +0,0 @@ -! -! OsmoBSCNAT (0.12.0.266-2daa9) configuration saved from vty -!! -! -log stderr - logging filter all 1 - logging color 1 - logging timestamp 0 - logging level all debug - logging level rll notice - logging level cc notice - logging level mm notice - logging level rr notice - logging level rsl notice - logging level nm info - logging level mncc notice - logging level pag notice - logging level meas notice - logging level sccp notice - logging level msc notice - logging level mgcp notice - logging level ho notice - logging level db notice - logging level ref notice - logging level gprs debug - logging level ns info - logging level bssgp debug - logging level llc debug - logging level sndcp debug - logging level nat notice - logging level ctrl notice - logging level smpp debug - logging level lglobal notice - logging level llapd notice - logging level linp notice - logging level lmux notice - logging level lmi notice - logging level lmib notice - logging level lsms notice -! -line vty - no login -! -mgcp - bind ip 0.0.0.0 - bind port 2427 - rtp bts-base 4000 - rtp net-base 16000 - rtp ip-dscp 0 - no rtcp-omit - sdp audio-payload number 126 - sdp audio-payload name AMR/8000 - loop 0 - number endpoints 1 - call-agent ip 127.0.0.1 - rtp transcoder-base 0 - transcoder-remote-base 4000 -nat - msc ip 127.0.0.1 - msc port 5000 - timeout auth 2 - timeout ping 20 - timeout pong 5 - ip-dscp 0 - bscs-config-file bscs.config - access-list bla imsi-allow ^11$ diff --git a/openbsc/doc/examples/osmo-gbproxy/osmo-gbproxy-legacy.cfg b/openbsc/doc/examples/osmo-gbproxy/osmo-gbproxy-legacy.cfg deleted file mode 100644 index 15fd74a2b..000000000 --- a/openbsc/doc/examples/osmo-gbproxy/osmo-gbproxy-legacy.cfg +++ /dev/null @@ -1,44 +0,0 @@ -! -! OsmoGbProxy (UNKNOWN) configuration saved from vty -!! -! -log stderr - logging filter all 1 - logging color 1 - logging timestamp 0 - logging level all debug - logging level gprs debug - logging level ns info - logging level bssgp debug - logging level lglobal notice - logging level llapd notice - logging level linp notice - logging level lmux notice - logging level lmi notice - logging level lmib notice - logging level lsms notice -! -line vty - no login -! -ns - nse 666 nsvci 666 - nse 666 remote-role sgsn -! nse 666 encapsulation framerelay-gre -! nse 666 remote-ip 172.16.1.70 -! nse 666 fr-dlci 666 - timer tns-block 3 - timer tns-block-retries 3 - timer tns-reset 3 - timer tns-reset-retries 3 - timer tns-test 30 - timer tns-alive 3 - timer tns-alive-retries 10 - encapsulation udp local-port 23000 -! encapsulation framerelay-gre enabled 1 -gbproxy - sgsn nsei 666 - core-mobile-country-code 666 - core-mobile-network-code 6 - core-access-point-name none match-imsi ^666066|^66607 - tlli-list max-length 200 diff --git a/openbsc/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg b/openbsc/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg deleted file mode 100644 index 0c3917a3e..000000000 --- a/openbsc/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg +++ /dev/null @@ -1,25 +0,0 @@ -! -! Osmocom Gb Proxy (0.9.0.404-6463) configuration saved from vty -!! -! -line vty - no login -! -gbproxy - sgsn nsei 101 -ns - nse 101 nsvci 101 - nse 101 remote-role sgsn - nse 101 encapsulation udp - nse 101 remote-ip 192.168.100.239 - nse 101 remote-port 7777 - timer tns-block 3 - timer tns-block-retries 3 - timer tns-reset 3 - timer tns-reset-retries 3 - timer tns-test 30 - timer tns-alive 3 - timer tns-alive-retries 10 - encapsulation framerelay-gre enabled 0 - encapsulation framerelay-gre local-ip 0.0.0.0 - encapsulation udp local-port 23000 diff --git a/openbsc/doc/examples/osmo-gtphub/gtphub-example.txt b/openbsc/doc/examples/osmo-gtphub/gtphub-example.txt deleted file mode 100644 index 9c65f925f..000000000 --- a/openbsc/doc/examples/osmo-gtphub/gtphub-example.txt +++ /dev/null @@ -1,90 +0,0 @@ -Here is a simple setup to test GTPHub operations. The IP addresses picked will -work well only on a system that creates local addresses (127.0.0.123) on the -fly (like linux) -- you may pick of course different IP addresses. - -Overview of the example setup: - - sgsnemu gtphub ggsn - 127.0.0.1 <--> 127.0.0.3 127.0.0.4 <--> 127.0.0.2 - -Prerequisites: openggsn. - -Have a local directory where you store config files and from which you launch -the GSNs and the hub (they will store restart counter files in that dir). -In it, have these config files: - -ggsn.conf: - - # GGSN local address - listen 127.0.0.2 - - # End User Addresses are picked from this range - net 10.23.42.0/24 - - pcodns1 8.8.8.8 - - logfile /tmp/foo - -gtphub.conf: - - gtphub - bind-to-sgsns 127.0.0.3 - bind-to-ggsns 127.0.0.4 - ggsn-proxy 127.0.0.2 - end - - -( -You may omit the ggsn-proxy if GRX ares is working, or if you add the GRX -address and GGSN IP address to /etc/hosts something like: - - 127.0.0.2 internet.mnc070.mcc901.gprs - -) - - -Once the config files are in place, start the programs, in separate terminals. -GGSN and SGSN need to be started with root priviliges to be able to create tun -interfaces. GTPHub may run as unprivileged user. - -The LD_LIBRARY_PATH below may be needed if OpenGGSN installed to /usr/local. - - -1. GGSN: - - sudo -s - cd <your-test-dir> - LD_LIBRARY_PATH=/usr/local/lib /usr/local/bin/ggsn -f -c ./ggsn.conf - -2. GTPHub: - - cd <your-test-dir> - path/to/openbsc/openbsc/src/gprs/osmo-gtphub -c gtphub.conf #-e 1 #for DEBUG level - -3. SGSN tests: - - sudo -s - cd <your-test-dir> - /usr/local/bin/sgsnemu --createif -l 127.0.0.1 -r 127.0.0.3 --imsi 420001214365100 --contexts=3 - -Add more SGSNs using different IMSIs and local ports (if the same IMSI is used, -the GGSN will reuse TEIs and tunnels will be discarded automatically): - - /usr/local/bin/sgsnemu --createif -l 127.0.0.11 -r 127.0.0.3 --imsi 420001214365300 --contexts=3 - -This shows the basic setup of GTPHub. Testing internet traffic via sgsnemu -still needs some effort to announce a mobile subscriber or the like (I have -used a real BTS, osmo-sgsn and a testing SIM in a web phone, instead). - -The core capability of GTPHub is to manage more than two GSNs, e.g. an SGSN -contacting various GGSNs over the single GTPHub link. You would configure the -SGSN to use one fixed GGSN (sending to gtphub) and gtphub will resolve the -GGSNs once it has received the messages. So the SGSN may be behind NAT (add -"sgsn-use-sender" to gtphub.conf) and communicate to various GGSNs over a -single link to gtphub. - -I hope this helps to get you going. -Any suggestions/patches are welcome! - -~Neels - diff --git a/openbsc/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg b/openbsc/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg deleted file mode 100644 index 3913d2c3c..000000000 --- a/openbsc/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg +++ /dev/null @@ -1,25 +0,0 @@ -! -! Osmocom gtphub configuration -! -! This file is used for VTY tests, referenced by openbsc/osmoappdesc.py -! For the test, try to use most config commands. -! - -line vty - no login - -gtphub - ! Local addresses to listen on and send from, both on one interface. - ! The side towards SGSN uses nonstandard ports. - bind-to-sgsns ctrl 127.0.0.1 12123 user 127.0.0.1 12153 - ! The GGSN side with standard ports. - bind-to-ggsns 127.0.0.1 - - ! Proxy: unconditionally direct all traffic to... - sgsn-proxy 127.0.0.4 - - ! Proxy with nonstandard ports or separate IPs: - ggsn-proxy ctrl 127.0.0.3 2123 user 127.0.0.5 2152 - - ! Add a name server for GGSN resolution - grx-dns-add 192.168.0.1 diff --git a/openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg b/openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg deleted file mode 100644 index 0dc415047..000000000 --- a/openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg +++ /dev/null @@ -1,25 +0,0 @@ -! -! Osmocom gtphub configuration -! - -line vty - no login - -gtphub - ! Local addresses to listen on and send from, each on standard ports - ! 2123 and 2152. Setting these addresses is mandatory. - bind-to-sgsns 127.0.0.1 - bind-to-ggsns 127.0.0.2 - - ! Local nonstandard ports or separate IPs: - !bind-to-sgsns ctrl 127.0.0.1 2342 user 127.0.0.1 4223 - - ! Proxy: unconditionally direct all traffic to... - !ggsn-proxy 127.0.0.3 - !sgsn-proxy 127.0.0.4 - - ! Proxy with nonstandard ports or separate IPs: - !ggsn-proxy ctrl 127.0.0.3 2123 user 127.0.0.5 2152 - - ! Add a name server for GGSN resolution - !grx-dns-add 192.168.0.1 diff --git a/openbsc/doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx-hopping.cfg b/openbsc/doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx-hopping.cfg deleted file mode 100644 index 673064491..000000000 --- a/openbsc/doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx-hopping.cfg +++ /dev/null @@ -1,164 +0,0 @@ -! -! OpenBSC (0.9.0.845-57c4) configuration saved from vty -!! -password foo -! -line vty - no login -! -e1_input - e1_line 0 driver misdn -network - network country code 1 - mobile network code 1 - short name OpenBSC - long name OpenBSC - auth policy closed - location updating reject cause 13 - encryption a5 0 - neci 1 - rrlp mode none - mm info 0 - handover 0 - handover window rxlev averaging 10 - handover window rxqual averaging 1 - handover window rxlev neighbor averaging 10 - handover power budget interval 6 - handover power budget hysteresis 3 - handover maximum distance 9999 - timer t3101 10 - timer t3103 0 - timer t3105 0 - timer t3107 0 - timer t3109 4 - timer t3111 0 - timer t3113 60 - timer t3115 0 - timer t3117 0 - timer t3119 0 - timer t3141 0 - bts 0 - type bs11 - band GSM900 - cell_identity 0 - location_area_code 1 - training_sequence_code 7 - base_station_id_code 63 - ms max power 15 - cell reselection hysteresis 4 - rxlev access min 0 - channel allocator descending - rach tx integer 9 - rach max transmission 7 - oml e1 line 0 timeslot 1 sub-slot full - oml e1 tei 25 - gprs mode none - trx 0 - rf_locked 0 - arfcn 121 - nominal power 24 - max_power_red 12 - rsl e1 line 0 timeslot 1 sub-slot full - rsl e1 tei 1 - timeslot 0 - phys_chan_config CCCH - hopping enabled 0 - e1 line 0 timeslot 1 sub-slot full - timeslot 1 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 2 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 2 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 2 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 3 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 3 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 3 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 3 sub-slot 3 - trx 1 - rf_locked 0 - arfcn 119 - nominal power 24 - max_power_red 12 - rsl e1 line 0 timeslot 1 sub-slot full - rsl e1 tei 2 - timeslot 0 - phys_chan_config SDCCH8 - hopping enabled 1 - hopping sequence-number 0 - hopping maio 0 - hopping arfcn add 117 - hopping arfcn add 119 - timeslot 1 - phys_chan_config TCH/F - hopping enabled 1 - hopping sequence-number 0 - hopping maio 0 - hopping arfcn add 117 - hopping arfcn add 119 - e1 line 0 timeslot 4 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - hopping enabled 1 - hopping sequence-number 0 - hopping maio 0 - hopping arfcn add 117 - hopping arfcn add 119 - e1 line 0 timeslot 4 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - hopping enabled 1 - hopping sequence-number 0 - hopping maio 0 - hopping arfcn add 117 - hopping arfcn add 119 - e1 line 0 timeslot 4 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - hopping enabled 1 - hopping sequence-number 0 - hopping maio 0 - hopping arfcn add 117 - hopping arfcn add 119 - e1 line 0 timeslot 5 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - hopping enabled 1 - hopping sequence-number 0 - hopping maio 0 - hopping arfcn add 117 - hopping arfcn add 119 - e1 line 0 timeslot 5 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - hopping enabled 1 - hopping sequence-number 0 - hopping maio 0 - hopping arfcn add 117 - hopping arfcn add 119 - e1 line 0 timeslot 5 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - hopping enabled 1 - hopping sequence-number 0 - hopping maio 0 - hopping arfcn add 117 - hopping arfcn add 119 - e1 line 0 timeslot 5 sub-slot 3 diff --git a/openbsc/doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx.cfg b/openbsc/doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx.cfg deleted file mode 100644 index ca5689fd5..000000000 --- a/openbsc/doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx.cfg +++ /dev/null @@ -1,84 +0,0 @@ -! -! OpenBSC configuration saved from vty -! ! -password foo -! -line vty - no login -! -e1_input - e1_line 0 driver misdn -network - network country code 1 - mobile network code 1 - short name OpenBSC - long name OpenBSC - timer t3101 10 - timer t3113 60 - bts 0 - type bs11 - band GSM900 - cell_identity 1 - location_area_code 1 - training_sequence_code 7 - base_station_id_code 63 - oml e1 line 0 timeslot 1 sub-slot full - oml e1 tei 25 - trx 0 - arfcn 121 - max_power_red 0 - rsl e1 line 0 timeslot 1 sub-slot full - rsl e1 tei 1 - timeslot 0 - phys_chan_config CCCH+SDCCH4 - e1 line 0 timeslot 1 sub-slot full - timeslot 1 - phys_chan_config SDCCH8 - e1 line 0 timeslot 2 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - e1 line 0 timeslot 2 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - e1 line 0 timeslot 2 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 3 - trx 1 - arfcn 123 - max_power_red 0 - rsl e1 line 0 timeslot 1 sub-slot full - rsl e1 tei 2 - timeslot 0 - phys_chan_config TCH/F - e1 line 0 timeslot 4 sub-slot 0 - timeslot 1 - phys_chan_config TCH/F - e1 line 0 timeslot 4 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - e1 line 0 timeslot 4 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - e1 line 0 timeslot 4 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - e1 line 0 timeslot 5 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - e1 line 0 timeslot 5 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - e1 line 0 timeslot 5 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - e1 line 0 timeslot 5 sub-slot 3 diff --git a/openbsc/doc/examples/osmo-nitb/bs11/openbsc-2bts-2trx.cfg b/openbsc/doc/examples/osmo-nitb/bs11/openbsc-2bts-2trx.cfg deleted file mode 100644 index 4f194c00c..000000000 --- a/openbsc/doc/examples/osmo-nitb/bs11/openbsc-2bts-2trx.cfg +++ /dev/null @@ -1,148 +0,0 @@ -! -! OpenBSC configuration saved from vty -! ! -password foo -! -line vty - no login -! -network - network country code 1 - mobile network code 1 - short name OpenBSC - long name OpenBSC - timer t3101 10 - timer t3113 60 - bts 0 - type bs11 - band GSM900 - cell_identity 1 - location_area_code 1 - training_sequence_code 7 - base_station_id_code 63 - oml e1 line 0 timeslot 1 sub-slot full - oml e1 tei 25 - trx 0 - arfcn 121 - max_power_red 0 - rsl e1 line 0 timeslot 1 sub-slot full - rsl e1 tei 1 - timeslot 0 - phys_chan_config CCCH+SDCCH4 - e1 line 0 timeslot 1 sub-slot full - timeslot 1 - phys_chan_config TCH/F - e1 line 0 timeslot 2 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - e1 line 0 timeslot 2 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - e1 line 0 timeslot 2 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 3 - trx 1 - arfcn 123 - max_power_red 0 - rsl e1 line 0 timeslot 1 sub-slot full - rsl e1 tei 2 - timeslot 0 - phys_chan_config TCH/F - e1 line 0 timeslot 4 sub-slot 0 - timeslot 1 - phys_chan_config TCH/F - e1 line 0 timeslot 4 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - e1 line 0 timeslot 4 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - e1 line 0 timeslot 4 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - e1 line 0 timeslot 5 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - e1 line 0 timeslot 5 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - e1 line 0 timeslot 5 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - e1 line 0 timeslot 5 sub-slot 3 - bts 1 - type bs11 - band GSM900 - location_area_code 2 - training_sequence_code 7 - base_station_id_code 63 - oml e1 line 1 timeslot 6 sub-slot full - oml e1 tei 25 - trx 0 - arfcn 122 - max_power_red 0 - rsl e1 line 1 timeslot 6 sub-slot full - rsl e1 tei 1 - timeslot 0 - phys_chan_config CCCH+SDCCH4 - e1 line 1 timeslot 7 sub-slot 0 - timeslot 1 - phys_chan_config SDCCH8 - e1 line 1 timeslot 7 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - e1 line 1 timeslot 7 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - e1 line 1 timeslot 7 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - e1 line 1 timeslot 8 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - e1 line 1 timeslot 8 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - e1 line 1 timeslot 8 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - e1 line 1 timeslot 8 sub-slot 3 - trx 1 - arfcn 124 - max_power_red 0 - rsl e1 line 1 timeslot 6 sub-slot full - rsl e1 tei 2 - timeslot 0 - phys_chan_config TCH/F - e1 line 1 timeslot 9 sub-slot 0 - timeslot 1 - phys_chan_config TCH/F - e1 line 1 timeslot 9 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - e1 line 1 timeslot 9 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - e1 line 1 timeslot 9 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - e1 line 1 timeslot 10 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - e1 line 1 timeslot 10 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - e1 line 1 timeslot 10 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - e1 line 1 timeslot 10 sub-slot 3 diff --git a/openbsc/doc/examples/osmo-nitb/bs11/openbsc.cfg b/openbsc/doc/examples/osmo-nitb/bs11/openbsc.cfg deleted file mode 100644 index 6c47a902d..000000000 --- a/openbsc/doc/examples/osmo-nitb/bs11/openbsc.cfg +++ /dev/null @@ -1,56 +0,0 @@ -! -! OpenBSC configuration saved from vty -! ! -password foo -! -line vty - no login -! -e1_input - e1_line 0 driver misdn -network - network country code 1 - mobile network code 1 - short name OpenBSC - long name OpenBSC - timer t3101 10 - timer t3113 60 - bts 0 - type bs11 - band GSM900 - cell_identity 1 - location_area_code 1 - training_sequence_code 7 - base_station_id_code 63 - oml e1 line 0 timeslot 1 sub-slot full - oml e1 tei 25 - trx 0 - arfcn 121 - max_power_red 0 - rsl e1 line 0 timeslot 1 sub-slot full - rsl e1 tei 1 - timeslot 0 - phys_chan_config CCCH+SDCCH4 - e1 line 0 timeslot 1 sub-slot full - timeslot 1 - phys_chan_config TCH/F - e1 line 0 timeslot 2 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - e1 line 0 timeslot 2 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - e1 line 0 timeslot 2 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 3 - diff --git a/openbsc/doc/examples/osmo-nitb/nanobts/openbsc-multitrx.cfg b/openbsc/doc/examples/osmo-nitb/nanobts/openbsc-multitrx.cfg deleted file mode 100644 index 3277bea56..000000000 --- a/openbsc/doc/examples/osmo-nitb/nanobts/openbsc-multitrx.cfg +++ /dev/null @@ -1,99 +0,0 @@ -! -! OpenBSC configuration saved from vty -! ! -password foo -! -line vty - no login -! -e1_input - e1_line 0 driver ipa -network - network country code 1 - mobile network code 1 - short name OpenBSC - long name OpenBSC - auth policy closed - location updating reject cause 13 - encryption a5 0 - neci 1 - rrlp mode none - mm info 0 - handover 0 - handover window rxlev averaging 10 - handover window rxqual averaging 1 - handover window rxlev neighbor averaging 10 - handover power budget interval 6 - handover power budget hysteresis 3 - handover maximum distance 9999 - timer t3101 10 - timer t3103 0 - timer t3105 0 - timer t3107 0 - timer t3109 4 - timer t3111 0 - timer t3113 60 - timer t3115 0 - timer t3117 0 - timer t3119 0 - timer t3141 0 - bts 0 - type nanobts - band DCS1800 - cell_identity 0 - location_area_code 1 - training_sequence_code 7 - base_station_id_code 63 - ms max power 15 - cell reselection hysteresis 4 - rxlev access min 0 - channel allocator ascending - rach tx integer 9 - rach max transmission 7 - ip.access unit_id 1800 0 - oml ip.access stream_id 255 line 0 - gprs mode none - trx 0 - rf_locked 0 - arfcn 871 - nominal power 23 - max_power_red 0 - rsl e1 tei 0 - timeslot 0 - phys_chan_config CCCH+SDCCH4 - timeslot 1 - phys_chan_config SDCCH8 - timeslot 2 - phys_chan_config TCH/F - timeslot 3 - phys_chan_config TCH/F - timeslot 4 - phys_chan_config TCH/F - timeslot 5 - phys_chan_config TCH/F - timeslot 6 - phys_chan_config TCH/F - timeslot 7 - phys_chan_config TCH/F - trx 1 - rf_locked 0 - arfcn 873 - nominal power 23 - max_power_red 0 - rsl e1 tei 0 - timeslot 0 - phys_chan_config SDCCH8 - timeslot 1 - phys_chan_config TCH/F - timeslot 2 - phys_chan_config TCH/F - timeslot 3 - phys_chan_config TCH/F - timeslot 4 - phys_chan_config TCH/F - timeslot 5 - phys_chan_config TCH/F - timeslot 6 - phys_chan_config TCH/F - timeslot 7 - phys_chan_config TCH/F diff --git a/openbsc/doc/examples/osmo-nitb/nanobts/openbsc.cfg b/openbsc/doc/examples/osmo-nitb/nanobts/openbsc.cfg deleted file mode 100644 index cfc1be6b0..000000000 --- a/openbsc/doc/examples/osmo-nitb/nanobts/openbsc.cfg +++ /dev/null @@ -1,77 +0,0 @@ -! -! OpenBSC configuration saved from vty -! ! -password foo -! -line vty - no login -! -e1_input - e1_line 0 driver ipa -network - network country code 1 - mobile network code 1 - short name OpenBSC - long name OpenBSC - auth policy closed - location updating reject cause 13 - encryption a5 0 - neci 1 - rrlp mode none - mm info 1 - handover 0 - handover window rxlev averaging 10 - handover window rxqual averaging 1 - handover window rxlev neighbor averaging 10 - handover power budget interval 6 - handover power budget hysteresis 3 - handover maximum distance 9999 - timer t3101 10 - timer t3103 0 - timer t3105 0 - timer t3107 0 - timer t3109 4 - timer t3111 0 - timer t3113 60 - timer t3115 0 - timer t3117 0 - timer t3119 0 - timer t3141 0 - bts 0 - type nanobts - band DCS1800 - cell_identity 0 - location_area_code 1 - training_sequence_code 7 - base_station_id_code 63 - ms max power 15 - cell reselection hysteresis 4 - rxlev access min 0 - channel allocator ascending - rach tx integer 9 - rach max transmission 7 - ip.access unit_id 1801 0 - oml ip.access stream_id 255 line 0 - gprs mode none - trx 0 - rf_locked 0 - arfcn 514 - nominal power 23 - max_power_red 20 - rsl e1 tei 0 - timeslot 0 - phys_chan_config CCCH+SDCCH4 - timeslot 1 - phys_chan_config SDCCH8 - timeslot 2 - phys_chan_config TCH/F - timeslot 3 - phys_chan_config TCH/F - timeslot 4 - phys_chan_config TCH/F - timeslot 5 - phys_chan_config TCH/F - timeslot 6 - phys_chan_config TCH/F - timeslot 7 - phys_chan_config TCH/F diff --git a/openbsc/doc/examples/osmo-nitb/nokia/openbsc_nokia_3trx.cfg b/openbsc/doc/examples/osmo-nitb/nokia/openbsc_nokia_3trx.cfg deleted file mode 100644 index 90386bec2..000000000 --- a/openbsc/doc/examples/osmo-nitb/nokia/openbsc_nokia_3trx.cfg +++ /dev/null @@ -1,117 +0,0 @@ -! -! OpenBSC configuration saved from vty -! ! -password foo -! -line vty - no login -! -e1_input - e1_line 0 driver misdn -network - network country code 1 - mobile network code 1 - short name OpenBSC - long name OpenBSC - timer t3101 10 - timer t3113 60 - bts 0 - type nokia_site - band GSM1800 - cell_identity 1 - location_area_code 1 - base_station_id_code 63 - training_sequence_code 7 - - oml e1 line 0 timeslot 1 sub-slot full - oml e1 tei 1 - - trx 0 - arfcn 866 - max_power_red 24 - rsl e1 line 0 timeslot 2 sub-slot full - rsl e1 tei 1 - timeslot 0 - phys_chan_config CCCH+SDCCH4 - e1 line 0 timeslot 6 sub-slot full - timeslot 1 - phys_chan_config SDCCH8 - e1 line 0 timeslot 6 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - e1 line 0 timeslot 6 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - e1 line 0 timeslot 6 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - e1 line 0 timeslot 7 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - e1 line 0 timeslot 7 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - e1 line 0 timeslot 7 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - e1 line 0 timeslot 7 sub-slot 3 - - trx 1 - arfcn 870 - max_power_red 24 - rsl e1 line 0 timeslot 3 sub-slot full - rsl e1 tei 2 - timeslot 0 - phys_chan_config TCH/F - e1 line 0 timeslot 8 sub-slot 0 - timeslot 1 - phys_chan_config TCH/F - e1 line 0 timeslot 8 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - e1 line 0 timeslot 8 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - e1 line 0 timeslot 8 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - e1 line 0 timeslot 9 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - e1 line 0 timeslot 9 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - e1 line 0 timeslot 9 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - e1 line 0 timeslot 9 sub-slot 3 - - trx 2 - arfcn 874 - max_power_red 24 - rsl e1 line 0 timeslot 4 sub-slot full - rsl e1 tei 3 - timeslot 0 - phys_chan_config TCH/F - e1 line 0 timeslot 10 sub-slot 0 - timeslot 1 - phys_chan_config TCH/F - e1 line 0 timeslot 10 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - e1 line 0 timeslot 10 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - e1 line 0 timeslot 10 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - e1 line 0 timeslot 11 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - e1 line 0 timeslot 11 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - e1 line 0 timeslot 11 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - e1 line 0 timeslot 11 sub-slot 3 diff --git a/openbsc/doc/examples/osmo-nitb/rbs2308/openbsc.cfg b/openbsc/doc/examples/osmo-nitb/rbs2308/openbsc.cfg deleted file mode 100644 index 0226920e1..000000000 --- a/openbsc/doc/examples/osmo-nitb/rbs2308/openbsc.cfg +++ /dev/null @@ -1,220 +0,0 @@ -! -! OpenBSC (0.9.11.308-62d46) configuration saved from vty -!! -password foo -! -line vty - no login -! -network - network country code 262 - mobile network code 42 - short name OpenBSC - long name OpenBSC - auth policy closed - location updating reject cause 13 - encryption a5 0 - neci 0 - paging any use tch 0 - rrlp mode none - mm info 0 - handover 0 - handover window rxlev averaging 10 - handover window rxqual averaging 1 - handover window rxlev neighbor averaging 10 - handover power budget interval 6 - handover power budget hysteresis 3 - handover maximum distance 9999 - timer t3101 10 - timer t3103 0 - timer t3105 0 - timer t3107 0 - timer t3109 4 - timer t3111 0 - timer t3113 60 - timer t3115 0 - timer t3117 0 - timer t3119 0 - timer t3122 0 - timer t3141 0 - subscriber-keep-in-ram 0 - bts 0 - type rbs2000 - band GSM900 - cell_identity 0 - location_area_code 1 - training_sequence_code 7 - base_station_id_code 63 - ms max power 15 - cell reselection hysteresis 4 - rxlev access min 0 - channel allocator descending - rach tx integer 9 - rach max transmission 7 - oml e1 line 0 timeslot 1 sub-slot full - oml e1 tei 62 - neighbor-list mode automatic - gprs mode none - is-connection-list add 4 512 12 - is-connection-list add 16 524 12 - is-connection-list add 28 536 12 - is-connection-list add 40 548 12 - trx 0 - rf_locked 0 - arfcn 55 - nominal power 24 - max_power_red 12 - rsl e1 line 0 timeslot 1 sub-slot full - rsl e1 tei 0 - timeslot 0 - phys_chan_config CCCH+SDCCH4 - hopping enabled 0 - e1 line 0 timeslot 1 sub-slot full - timeslot 1 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 2 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 2 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 2 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 3 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 3 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 3 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 3 sub-slot 3 - trx 1 - rf_locked 0 - arfcn 57 - nominal power 24 - max_power_red 12 - rsl e1 line 0 timeslot 4 sub-slot full - rsl e1 tei 1 - timeslot 0 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 5 sub-slot 0 - timeslot 1 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 5 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 5 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 5 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 6 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 6 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 6 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 6 sub-slot 3 - trx 2 - rf_locked 0 - arfcn 59 - nominal power 24 - max_power_red 12 - rsl e1 line 0 timeslot 7 sub-slot full - rsl e1 tei 2 - timeslot 0 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 8 sub-slot 0 - timeslot 1 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 8 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 8 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 8 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 9 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 9 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 9 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 9 sub-slot 3 - trx 3 - rf_locked 0 - arfcn 61 - nominal power 24 - max_power_red 12 - rsl e1 line 0 timeslot 10 sub-slot full - rsl e1 tei 3 - timeslot 0 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 11 sub-slot 0 - timeslot 1 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 11 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 11 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 11 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 12 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 12 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 12 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - hopping enabled 0 - e1 line 0 timeslot 12 sub-slot 3 - -e1_input - e1_line 0 driver dahdi diff --git a/openbsc/doc/examples/osmo-nitb/sysmobts/openbsc.cfg b/openbsc/doc/examples/osmo-nitb/sysmobts/openbsc.cfg deleted file mode 100644 index 7c078f63d..000000000 --- a/openbsc/doc/examples/osmo-nitb/sysmobts/openbsc.cfg +++ /dev/null @@ -1,77 +0,0 @@ -! -! OpenBSC configuration saved from vty -! ! -password foo -! -line vty - no login -! -e1_input - e1_line 0 driver ipa -network - network country code 1 - mobile network code 1 - short name OpenBSC - long name OpenBSC - auth policy closed - location updating reject cause 13 - encryption a5 0 - neci 1 - rrlp mode none - mm info 1 - handover 0 - handover window rxlev averaging 10 - handover window rxqual averaging 1 - handover window rxlev neighbor averaging 10 - handover power budget interval 6 - handover power budget hysteresis 3 - handover maximum distance 9999 - timer t3101 10 - timer t3103 0 - timer t3105 0 - timer t3107 0 - timer t3109 4 - timer t3111 0 - timer t3113 60 - timer t3115 0 - timer t3117 0 - timer t3119 0 - timer t3141 0 - bts 0 - type sysmobts - band DCS1800 - cell_identity 0 - location_area_code 1 - training_sequence_code 7 - base_station_id_code 63 - ms max power 15 - cell reselection hysteresis 4 - rxlev access min 0 - channel allocator ascending - rach tx integer 9 - rach max transmission 7 - ip.access unit_id 1801 0 - oml ip.access stream_id 255 line 0 - gprs mode none - trx 0 - rf_locked 0 - arfcn 514 - nominal power 23 - max_power_red 20 - rsl e1 tei 0 - timeslot 0 - phys_chan_config CCCH+SDCCH4 - timeslot 1 - phys_chan_config SDCCH8 - timeslot 2 - phys_chan_config TCH/F - timeslot 3 - phys_chan_config TCH/F - timeslot 4 - phys_chan_config TCH/F - timeslot 5 - phys_chan_config TCH/F - timeslot 6 - phys_chan_config TCH/F - timeslot 7 - phys_chan_config TCH/F diff --git a/openbsc/doc/examples/osmo-sgsn/osmo-sgsn.cfg b/openbsc/doc/examples/osmo-sgsn/osmo-sgsn.cfg deleted file mode 100644 index 49559830a..000000000 --- a/openbsc/doc/examples/osmo-sgsn/osmo-sgsn.cfg +++ /dev/null @@ -1,26 +0,0 @@ -! -! Osmocom SGSN configuration -! -! -line vty - no login -! -sgsn - gtp local-ip 127.0.0.1 - ggsn 0 remote-ip 127.0.0.1 - ggsn 0 gtp-version 1 -! -ns - timer tns-block 3 - timer tns-block-retries 3 - timer tns-reset 3 - timer tns-reset-retries 3 - timer tns-test 30 - timer tns-alive 3 - timer tns-alive-retries 10 - encapsulation udp local-ip 127.0.0.1 - encapsulation udp local-port 23000 - encapsulation framerelay-gre enabled 0 -! -bssgp -! |