diff options
Diffstat (limited to 'doc')
-rw-r--r-- | doc/manuals/Makefile | 42 | ||||
-rw-r--r-- | doc/manuals/chapters/alink.adoc | 15 | ||||
-rw-r--r-- | doc/manuals/chapters/overview.adoc | 69 | ||||
-rw-r--r-- | doc/manuals/chapters/running.adoc | 42 | ||||
-rw-r--r-- | doc/manuals/osmobsc-usermanual-docinfo.xml | 52 | ||||
-rw-r--r-- | doc/manuals/osmobsc-usermanual.adoc | 35 | ||||
-rw-r--r-- | doc/manuals/osmobsc-vty-reference.xml | 44 | ||||
-rw-r--r-- | doc/manuals/vty/bsc_vty_additions.xml | 14 | ||||
-rw-r--r-- | doc/manuals/vty/bsc_vty_reference.xml | 3059 |
9 files changed, 3372 insertions, 0 deletions
diff --git a/doc/manuals/Makefile b/doc/manuals/Makefile new file mode 100644 index 000000000..e2c464cf2 --- /dev/null +++ b/doc/manuals/Makefile @@ -0,0 +1,42 @@ +# XSL stylesheets downloaded from http://docbook.sourceforge.net/release/xsl/current/html/ +# Makefile from BitBake/OpenEmbedded manuals + + +EXTRA_DEPS = gen-bsc-vty-docbook + +topdir = . +bsc_reference = $(topdir)/osmobsc-vty-reference.xml +manuals = $(bsc_reference) +# types = pdf txt rtf ps xhtml html man tex texi dvi +# types = pdf txt +types = $(docbooktotypes) +docbooktotypes = pdf +# htmlcssfile = +# htmlcss = + +TOPDIR := .. +ASCIIDOCS := osmobsc-usermanual + +include $(TOPDIR)/build/Makefile.asciidoc.inc +include $(TOPDIR)/build/Makefile.inc + +osmobsc-usermanual.pdf: chapters/*.adoc + +clean: + rm -rf $(cleanfiles) + +gen-bsc-vty-docbook: FORCE + $(call command,xsltproc -o generated/combined1.xml \ + --stringparam with $(PWD)/../common/vty_additions.xml \ + $(MERGE_DOC) vty/bsc_vty_reference.xml, \ + XSLTPROC,Merging Common VTY) + $(call command,xsltproc -o generated/combined2.xml \ + --stringparam with $(PWD)/../common/bsc_vty_additions.xml \ + $(MERGE_DOC) generated/combined1.xml, \ + XSLTPROC,Merging Common BSC VTY) + $(call command,xsltproc -o generated/combined3.xml \ + --stringparam with $(PWD)/vty/bsc_vty_additions.xml \ + $(MERGE_DOC) generated/combined2.xml, \ + XSLTPROC,Merging BSC VTY) + $(call command,xsltproc ../vty_reference.xsl generated/combined3.xml > generated/docbook_vty.xml, \ + XSLTPROC,Converting BSC VTY to DocBook) diff --git a/doc/manuals/chapters/alink.adoc b/doc/manuals/chapters/alink.adoc new file mode 100644 index 000000000..37e64c06b --- /dev/null +++ b/doc/manuals/chapters/alink.adoc @@ -0,0 +1,15 @@ +== A-link including SCCP/BSSAP/DTAP + +OsmoBSC implements a minimal sub-set of the GSM A interface as specified +in TS 08.08. + +Unlike classic A interface implementations for E1 interfacs, OsmoBSC +implements a variant of encapsulating the A interface over IP. To do +so, the SCCP messages are wrapped in an IPA multiplex and then +communicated over TCP. The audio channels are mapped to RTP streams. + +This protcol stacking is sometimes called "SCCPlite". + +=== + +FIXME diff --git a/doc/manuals/chapters/overview.adoc b/doc/manuals/chapters/overview.adoc new file mode 100644 index 000000000..b6cc2e888 --- /dev/null +++ b/doc/manuals/chapters/overview.adoc @@ -0,0 +1,69 @@ +[[overview]] +== Overview + +This manual should help you getting started with OsmoBSC. It will cover +aspects of configuring and running the OsmoBSC. + +[[intro_overview]] +=== About OsmoBSC + +OsmoBSC is one particular version of the OpenBSC software suite. + +Unlike the highly integrated OmsoNITB, OsmoBSC impleents a more classic +GSM Base Station Controller with A-bis interface towards BTSs and A +interface towards a MSC. + + +=== Software Components + +OsmoBSC contains a variety of different software components, which +we'll quickly describe in this section. + +==== A-bis Implementation + +OsmoBSC implements the ETSI/3GPP specified A-bis interface, including +TS 08.56 (LAPD), TS 08.58 (RSL) and TS 12.21 (OML). In addition, it +supports a variety of vendor-specific extensions and dialects in order +to communicate with BTSs from Siemens, Nokia, Ericsson, ip.access and +sysmocom. + +For more information, see <<bts>> and <<bts-examples>>. + +==== A Implementation + +OsmoBSC implements a minimal sub-set of the GSM A interface as specified +in TS 08.08. + +Unlike classic A interface implementations for E1 interfacs, OsmoBSC +implements a variant of encapsulating the A interface over IP. To do +so, the SCCP messages are wrapped in an IPA multiplex and then +communicated over TCP. The audio channels are mapped to RTP streams. + +This protcol stacking is sometimes called "SCCPlite". + +For more information, see <<alink>>. + + +==== BSC Implementation + +The BSC implementation covers the classic functionality of a GSM Base +Station Controller, i.e. + +* configuring and bringing up BTSs with their TRXs and TSs +* implementing the A-bis interface / protocols for signalling and actual + voice data (TRAU frames). +* processing measurement results from the mobile stations in dedicated + mode, performing hand-over decision and execution. +* Terminating the TS 04.08 RR (Radio Resource) sub-layer from the MS. + +For more information, see <<net>>, <<bts>> and <<bts-examples>>. + + +==== TRAU mapper / E1 sub-channel muxer + +Unlike classic GSM networks, OsmoBSC does not perform any transcoding. +Rather, a compatible codec is selected for both legs of a call, and +codec frames are passed through transparently. In order to achieve this +with E1 based BTS, OsmoBSC contains a E1 sub-channel de- and +re-multiplexer as well as a TRAU mapper that can map uplink to downlink +frames and vice versa. diff --git a/doc/manuals/chapters/running.adoc b/doc/manuals/chapters/running.adoc new file mode 100644 index 000000000..4be680986 --- /dev/null +++ b/doc/manuals/chapters/running.adoc @@ -0,0 +1,42 @@ +== Running OsmoBSC + +The OsmoBSC executable (`osmo-bsc`) offers the following command-line +arguments: + +==== SYNOPSIS + +*osmo-bsc* [-h|-V] [-d 'DBGMASK'] [-D] [-c 'CONFIGFILE'] [-s] [-T] [-e 'LOGLEVEL'] [-l 'IP'] [-r 'RFCTL'] + +==== OPTIONS + +*-h, --help*:: + Print a short help message about the supported options +*-V, --version*:: + Print the compile-time version number of the OsmoBTS program +*-d, --debug 'DBGMASK','DBGLEVELS'*:: + Set the log subsystems and levels for logging to stderr. This + has mostly been superseded by VTY-based logging configuration, + see <<logging>> for further information. +*-D, --daemonize*:: + Fork the process as a daemon into background. +*-c, --config-file 'CONFIGFILE'*:: + Specify the file and path name of the configuration file to be + used. If none is specified, use `openbsc.cfg` in the current + working directory. +*-s, --disable-color*:: + Disable colors for logging to stderr. This has mostly been + deprecated by VTY based logging configuration, see <<logging>> + for more information. +*-T, --timestamp*:: + Enable time-stamping of log messages to stderr. This has mostly + been deprecated by VTY based logging configu- ration, see + <<logging>> for more information. +*-e, --log-level 'LOGLEVEL'*:: + Set the global log level for logging to stderr. This has mostly + been deprecated by VTY based logging configuration, see + <<logging>> for more information. +*-l, --local='IP'*:: + Specify the local IP address of the OsmoBSC-MGCP +*-r, --rf-ctl 'RFCTL'*:: + Offer a Unix domain socket for RF control at the path/filename + 'RFCTL' in the file system. diff --git a/doc/manuals/osmobsc-usermanual-docinfo.xml b/doc/manuals/osmobsc-usermanual-docinfo.xml new file mode 100644 index 000000000..42307ceab --- /dev/null +++ b/doc/manuals/osmobsc-usermanual-docinfo.xml @@ -0,0 +1,52 @@ +<revhistory> + <revision> + <revnumber>1</revnumber> + <date>February 2016</date> + <authorinitials>HW</authorinitials> + <revremark> + Initial OsmoBSC manual, recycling OsmoNITB sections + </revremark> + </revision> +</revhistory> + +<authorgroup> + <author> + <firstname>Holger</firstname> + <surname>Freyther</surname> + <email>hfreyther@sysmocom.de</email> + <authorinitials>HF</authorinitials> + <affiliation> + <shortaffil>sysmocom</shortaffil> + <orgname>sysmocom - s.f.m.c. GmbH</orgname> + <jobtitle>Managing Director</jobtitle> + </affiliation> + </author> + <author> + <firstname>Harald</firstname> + <surname>Welte</surname> + <email>hwelte@sysmocom.de</email> + <authorinitials>HW</authorinitials> + <affiliation> + <shortaffil>sysmocom</shortaffil> + <orgname>sysmocom - s.f.m.c. GmbH</orgname> + <jobtitle>Managing Director</jobtitle> + </affiliation> + </author> +</authorgroup> + +<copyright> + <year>2012-2016</year> + <holder>sysmocom - s.f.m.c. GmbH</holder> +</copyright> + +<legalnotice> + <para> + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.3 or any later version published by the Free Software + Foundation; with the Invariant Sections being just 'Foreword', + 'Acknowledgements' and 'Preface', with no Front-Cover Texts, + and no Back-Cover Texts. A copy of the license is included in + the section entitled "GNU Free Documentation License". + </para> +</legalnotice> diff --git a/doc/manuals/osmobsc-usermanual.adoc b/doc/manuals/osmobsc-usermanual.adoc new file mode 100644 index 000000000..dcb475a63 --- /dev/null +++ b/doc/manuals/osmobsc-usermanual.adoc @@ -0,0 +1,35 @@ +OsmoBSC User Manual +=================== +Harald Welte <hwelte@sysmocom.de> + + +include::../common/chapters/preface.adoc[] + +include::chapters/overview.adoc[] + +include::chapters/running.adoc[] + +include::../common/chapters/vty.adoc[] + +include::../common/chapters/logging.adoc[] + +include::../common/chapters/bts.adoc[] + +include::chapters/bts-examples.adoc[] + +include::../common/chapters/bsc.adoc[] + +include::../common/chapters/abis.adoc[] + +#include::../common/chapters/alink.adoc[] + +include::../common/chapters/control_if.adoc[] + +include::../common/chapters/port_numbers.adoc[] + +include::../common/chapters/bibliography.adoc[] + +include::../common/chapters/glossary.adoc[] + +include::../common/chapters/gfdl.adoc[] + diff --git a/doc/manuals/osmobsc-vty-reference.xml b/doc/manuals/osmobsc-vty-reference.xml new file mode 100644 index 000000000..6e60357c7 --- /dev/null +++ b/doc/manuals/osmobsc-vty-reference.xml @@ -0,0 +1,44 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- + ex:ts=2:sw=42sts=2:et + -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*- +--> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V5.0//EN" +"http://www.docbook.org/xml/5.0/dtd/docbook.dtd" [ +<!ENTITY chapter-vty SYSTEM "../common/chapters/vty.xml" > +<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" > +]> + +<book> + <info> + <revhistory> + <revision> + <revnumber>v1</revnumber> + <date>13th August 2012</date> + <authorinitials>hf</authorinitials> + <revremark>Initial</revremark> + </revision> + <revision> + <revnumber>v2</revnumber> + <date>5th March 2014</date> + <authorinitials>hf</authorinitials> + <revremark>Update to match osmo-bsc version 0.13.0-305</revremark> + </revision> + </revhistory> + + <title>OsmoBSC VTY Reference</title> + + <copyright> + <year>2012-2014</year> + </copyright> + + <legalnotice> + <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved. + </para> + </legalnotice> + </info> + + <!-- Main chapters--> + &chapter-vty; +</book> + diff --git a/doc/manuals/vty/bsc_vty_additions.xml b/doc/manuals/vty/bsc_vty_additions.xml new file mode 100644 index 000000000..2764eb8f9 --- /dev/null +++ b/doc/manuals/vty/bsc_vty_additions.xml @@ -0,0 +1,14 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> + <node id='25'> + <child_of nodeid='4' /> + <name>MSC Connection Commands</name> + <description>This node allows to configure the MSC connection related + settings.</description> + </node> + <node id='30'> + <child_of nodeid='4' /> + <name>BSC Commands</name> + <description>This node allows to configure the BSC connection related + settings.</description> + </node> +</vtydoc> diff --git a/doc/manuals/vty/bsc_vty_reference.xml b/doc/manuals/vty/bsc_vty_reference.xml new file mode 100644 index 000000000..3b61b4235 --- /dev/null +++ b/doc/manuals/vty/bsc_vty_reference.xml @@ -0,0 +1,3059 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
+ <node id='0'>
+ </node>
+ <node id='1'>
+ <command id='show version'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='version' doc='Displays program version' />
+ </params>
+ </command>
+ <command id='show online-help'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='online-help' doc='Online help' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='enable'>
+ <params>
+ <param name='enable' doc='Turn on privileged mode command' />
+ </params>
+ </command>
+ <command id='terminal length <0-512>'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='length' doc='Set number of lines on a screen' />
+ <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
+ </params>
+ </command>
+ <command id='terminal no length'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='length' doc='Set number of lines on a screen' />
+ </params>
+ </command>
+ <command id='echo .MESSAGE'>
+ <params>
+ <param name='echo' doc='Echo a message back to the vty' />
+ <param name='.MESSAGE' doc='The message to echo' />
+ </params>
+ </command>
+ <command id='who'>
+ <params>
+ <param name='who' doc='Display who is on vty' />
+ </params>
+ </command>
+ <command id='show history'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='history' doc='Display the session command history' />
+ </params>
+ </command>
+ <command id='show network'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='network' doc='Display information about a GSM NETWORK' />
+ </params>
+ </command>
+ <command id='show bts [<0-255>]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='bts' doc='Display information about a BTS' />
+ <param name='[<0-255>]' doc='BTS number' />
+ </params>
+ </command>
+ <command id='show trx [<0-255>] [<0-255>]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='trx' doc='Display information about a TRX' />
+ <param name='[<0-255>]' doc='BTS Number' />
+ <param name='[<0-255>]' doc='TRX Number' />
+ </params>
+ </command>
+ <command id='show timeslot [<0-255>] [<0-255>] [<0-7>]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='timeslot' doc='Display information about a TS' />
+ <param name='[<0-255>]' doc='BTS Number' />
+ <param name='[<0-255>]' doc='TRX Number' />
+ <param name='[<0-7>]' doc='Timeslot Number' />
+ </params>
+ </command>
+ <command id='show lchan [<0-255>] [<0-255>] [<0-7>] [lchan_nr]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='lchan' doc='Display information about a logical channel' />
+ <param name='[<0-255>]' doc='BTS Number' />
+ <param name='[<0-255>]' doc='TRX Number' />
+ <param name='[<0-7>]' doc='Timeslot Number' />
+ <param name='[lchan_nr]' doc='Logical Channel Number' />
+ </params>
+ </command>
+ <command id='show lchan summary [<0-255>] [<0-255>] [<0-7>] [lchan_nr]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='lchan' doc='Display information about a logical channel' />
+ <param name='summary' doc='Short summary' />
+ <param name='[<0-255>]' doc='BTS Number' />
+ <param name='[<0-255>]' doc='TRX Number' />
+ <param name='[<0-7>]' doc='Timeslot Number' />
+ <param name='[lchan_nr]' doc='Logical Channel Number' />
+ </params>
+ </command>
+ <command id='logging filter imsi IMSI'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='imsi' doc='Filter log messages by IMSI' />
+ <param name='IMSI' doc='IMSI to be used as filter' />
+ </params>
+ </command>
+ <command id='show paging [<0-255>]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='paging' doc='Display information about paging reuqests of a BTS' />
+ <param name='[<0-255>]' doc='BTS Number' />
+ </params>
+ </command>
+ <command id='show paging-group <0-255> IMSI'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='paging-group' doc='Display the paging group' />
+ <param name='<0-255>' doc='BTS Number' />
+ <param name='IMSI' doc='IMSI' />
+ </params>
+ </command>
+ <command id='logging enable'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='enable' doc='Enables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging disable'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='disable' doc='Disables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging filter all (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='all' doc='Do you want to log all messages?' />
+ <param name='0' doc='Only print messages matched by other filters' />
+ <param name='1' doc='Bypass filter and print all messages' />
+ </params>
+ </command>
+ <command id='logging color (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='color' doc='Configure color-printing for log messages' />
+ <param name='0' doc='Don't use color for printing messages' />
+ <param name='1' doc='Use color for printing messages' />
+ </params>
+ </command>
+ <command id='logging timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp' />
+ </params>
+ </command>
+ <command id='logging set-log-mask MASK'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='set-log-mask' doc='Set the logmask of this logging target' />
+ <param name='MASK' doc='The logmask to use' />
+ </params>
+ </command>
+ <command id='logging set log mask MASK'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='set' doc='Decide which categories to output.' />
+ <param name='log' doc='Log commands' />
+ <param name='mask' doc='Mask commands' />
+ <param name='MASK' doc='The logmask to use' />
+ </params>
+ </command>
+ <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='all' doc='Global setting for all subsystems' />
+ <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
+ <param name='cc' doc='Layer3 Call Control (CC)' />
+ <param name='mm' doc='Layer3 Mobility Management (MM)' />
+ <param name='rr' doc='Layer3 Radio Resource (RR)' />
+ <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
+ <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' />
+ <param name='mncc' doc='MNCC API for Call Control application' />
+ <param name='pag' doc='Paging Subsystem' />
+ <param name='meas' doc='Radio Measurement Processing' />
+ <param name='sccp' doc='SCCP Protocol' />
+ <param name='msc' doc='Mobile Switching Center' />
+ <param name='mgcp' doc='Media Gateway Control Protocol' />
+ <param name='ho' doc='Hand-Over' />
+ <param name='db' doc='Database Layer' />
+ <param name='ref' doc='Reference Counting' />
+ <param name='gprs' doc='GPRS Packet Service' />
+ <param name='ns' doc='GPRS Network Service (NS)' />
+ <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
+ <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
+ <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
+ <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
+ <param name='ctrl' doc='Control interface' />
+ <param name='smpp' doc='SMPP interface for external SMS apps' />
+ <param name='lglobal' doc='Library-internal global log family' />
+ <param name='llapd' doc='LAPD in libosmogsm' />
+ <param name='linp' doc='A-bis Intput Subsystem' />
+ <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+ <param name='lmi' doc='A-bis Input Driver for Signalling' />
+ <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+ <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+ <param name='everything' doc='Log simply everything' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels' />
+ <param name='notice' doc='Log noticable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='show logging vty'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='logging' doc='Show current logging configuration' />
+ <param name='vty' doc='Show current logging configuration for this vty' />
+ </params>
+ </command>
+ <command id='show alarms'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='alarms' doc='Show current logging configuration' />
+ </params>
+ </command>
+ <command id='show e1_driver'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='e1_driver' doc='Display information about available E1 drivers' />
+ </params>
+ </command>
+ <command id='show e1_line [line_nr] [stats]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='e1_line' doc='Display information about a E1 line' />
+ <param name='[line_nr]' doc='E1 Line Number' />
+ <param name='[stats]' doc='Include statistics' />
+ </params>
+ </command>
+ <command id='show e1_timeslot [line_nr] [ts_nr]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='e1_timeslot' doc='Display information about a E1 timeslot' />
+ <param name='[line_nr]' doc='E1 Line Number' />
+ <param name='[ts_nr]' doc='E1 Timeslot Number' />
+ </params>
+ </command>
+ <command id='show statistics'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='statistics' doc='Statistics about the BSC' />
+ </params>
+ </command>
+ <command id='show mscs'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='mscs' doc='MSC Connections and State' />
+ </params>
+ </command>
+ <command id='show position'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='position' doc='Position information of the BTS' />
+ </params>
+ </command>
+ </node>
+ <node id='2'>
+ </node>
+ <node id='3'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='disable'>
+ <params>
+ <param name='disable' doc='Turn off privileged mode command' />
+ </params>
+ </command>
+ <command id='configure terminal'>
+ <params>
+ <param name='configure' doc='Configuration from vty interface' />
+ <param name='terminal' doc='Configuration terminal' />
+ </params>
+ </command>
+ <command id='copy running-config startup-config'>
+ <params>
+ <param name='copy' doc='Copy configuration' />
+ <param name='running-config' doc='Copy running config to... ' />
+ <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
+ </params>
+ </command>
+ <command id='show startup-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='startup-config' doc='Contentes of startup configuration' />
+ </params>
+ </command>
+ <command id='show version'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='version' doc='Displays program version' />
+ </params>
+ </command>
+ <command id='show online-help'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='online-help' doc='Online help' />
+ </params>
+ </command>
+ <command id='terminal length <0-512>'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='length' doc='Set number of lines on a screen' />
+ <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
+ </params>
+ </command>
+ <command id='terminal no length'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='length' doc='Set number of lines on a screen' />
+ </params>
+ </command>
+ <command id='echo .MESSAGE'>
+ <params>
+ <param name='echo' doc='Echo a message back to the vty' />
+ <param name='.MESSAGE' doc='The message to echo' />
+ </params>
+ </command>
+ <command id='who'>
+ <params>
+ <param name='who' doc='Display who is on vty' />
+ </params>
+ </command>
+ <command id='show history'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='history' doc='Display the session command history' />
+ </params>
+ </command>
+ <command id='terminal monitor'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='monitor' doc='Copy debug output to the current terminal line' />
+ </params>
+ </command>
+ <command id='terminal no monitor'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='monitor' doc='Copy debug output to the current terminal line' />
+ </params>
+ </command>
+ <command id='show network'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='network' doc='Display information about a GSM NETWORK' />
+ </params>
+ </command>
+ <command id='show bts [<0-255>]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='bts' doc='Display information about a BTS' />
+ <param name='[<0-255>]' doc='BTS number' />
+ </params>
+ </command>
+ <command id='show trx [<0-255>] [<0-255>]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='trx' doc='Display information about a TRX' />
+ <param name='[<0-255>]' doc='BTS Number' />
+ <param name='[<0-255>]' doc='TRX Number' />
+ </params>
+ </command>
+ <command id='show timeslot [<0-255>] [<0-255>] [<0-7>]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='timeslot' doc='Display information about a TS' />
+ <param name='[<0-255>]' doc='BTS Number' />
+ <param name='[<0-255>]' doc='TRX Number' />
+ <param name='[<0-7>]' doc='Timeslot Number' />
+ </params>
+ </command>
+ <command id='show lchan [<0-255>] [<0-255>] [<0-7>] [lchan_nr]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='lchan' doc='Display information about a logical channel' />
+ <param name='[<0-255>]' doc='BTS Number' />
+ <param name='[<0-255>]' doc='TRX Number' />
+ <param name='[<0-7>]' doc='Timeslot Number' />
+ <param name='[lchan_nr]' doc='Logical Channel Number' />
+ </params>
+ </command>
+ <command id='show lchan summary [<0-255>] [<0-255>] [<0-7>] [lchan_nr]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='lchan' doc='Display information about a logical channel' />
+ <param name='summary' doc='Short summary' />
+ <param name='[<0-255>]' doc='BTS Number' />
+ <param name='[<0-255>]' doc='TRX Number' />
+ <param name='[<0-7>]' doc='Timeslot Number' />
+ <param name='[lchan_nr]' doc='Logical Channel Number' />
+ </params>
+ </command>
+ <command id='logging filter imsi IMSI'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='imsi' doc='Filter log messages by IMSI' />
+ <param name='IMSI' doc='IMSI to be used as filter' />
+ </params>
+ </command>
+ <command id='show paging [<0-255>]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='paging' doc='Display information about paging reuqests of a BTS' />
+ <param name='[<0-255>]' doc='BTS Number' />
+ </params>
+ </command>
+ <command id='show paging-group <0-255> IMSI'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='paging-group' doc='Display the paging group' />
+ <param name='<0-255>' doc='BTS Number' />
+ <param name='IMSI' doc='IMSI' />
+ </params>
+ </command>
+ <command id='logging enable'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='enable' doc='Enables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging disable'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='disable' doc='Disables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging filter all (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='all' doc='Do you want to log all messages?' />
+ <param name='0' doc='Only print messages matched by other filters' />
+ <param name='1' doc='Bypass filter and print all messages' />
+ </params>
+ </command>
+ <command id='logging color (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='color' doc='Configure color-printing for log messages' />
+ <param name='0' doc='Don't use color for printing messages' />
+ <param name='1' doc='Use color for printing messages' />
+ </params>
+ </command>
+ <command id='logging timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp' />
+ </params>
+ </command>
+ <command id='logging set-log-mask MASK'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='set-log-mask' doc='Set the logmask of this logging target' />
+ <param name='MASK' doc='The logmask to use' />
+ </params>
+ </command>
+ <command id='logging set log mask MASK'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='set' doc='Decide which categories to output.' />
+ <param name='log' doc='Log commands' />
+ <param name='mask' doc='Mask commands' />
+ <param name='MASK' doc='The logmask to use' />
+ </params>
+ </command>
+ <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='all' doc='Global setting for all subsystems' />
+ <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
+ <param name='cc' doc='Layer3 Call Control (CC)' />
+ <param name='mm' doc='Layer3 Mobility Management (MM)' />
+ <param name='rr' doc='Layer3 Radio Resource (RR)' />
+ <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
+ <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' />
+ <param name='mncc' doc='MNCC API for Call Control application' />
+ <param name='pag' doc='Paging Subsystem' />
+ <param name='meas' doc='Radio Measurement Processing' />
+ <param name='sccp' doc='SCCP Protocol' />
+ <param name='msc' doc='Mobile Switching Center' />
+ <param name='mgcp' doc='Media Gateway Control Protocol' />
+ <param name='ho' doc='Hand-Over' />
+ <param name='db' doc='Database Layer' />
+ <param name='ref' doc='Reference Counting' />
+ <param name='gprs' doc='GPRS Packet Service' />
+ <param name='ns' doc='GPRS Network Service (NS)' />
+ <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
+ <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
+ <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
+ <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
+ <param name='ctrl' doc='Control interface' />
+ <param name='smpp' doc='SMPP interface for external SMS apps' />
+ <param name='lglobal' doc='Library-internal global log family' />
+ <param name='llapd' doc='LAPD in libosmogsm' />
+ <param name='linp' doc='A-bis Intput Subsystem' />
+ <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+ <param name='lmi' doc='A-bis Input Driver for Signalling' />
+ <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+ <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+ <param name='everything' doc='Log simply everything' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels' />
+ <param name='notice' doc='Log noticable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='show logging vty'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='logging' doc='Show current logging configuration' />
+ <param name='vty' doc='Show current logging configuration for this vty' />
+ </params>
+ </command>
+ <command id='show alarms'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='alarms' doc='Show current logging configuration' />
+ </params>
+ </command>
+ <command id='drop bts connection <0-65535> (oml|rsl)'>
+ <params>
+ <param name='drop' doc='Debug/Simulation command to drop Abis/IP BTS' />
+ <param name='bts' doc='Debug/Simulation command to drop Abis/IP BTS' />
+ <param name='connection' doc='Debug/Simulation command to drop Abis/IP BTS' />
+ <param name='<0-65535>' doc='BTS NR' />
+ <param name='oml' doc='Drop OML Connection' />
+ <param name='rsl' doc='Drop RSL Connection' />
+ </params>
+ </command>
+ <command id='bts <0-255> trx <0-255> timeslot <0-7> pdch (activate|deactivate)'>
+ <params>
+ <param name='bts' doc='BTS related commands' />
+ <param name='<0-255>' doc='BTS Number' />
+ <param name='trx' doc='Transceiver' />
+ <param name='<0-255>' doc='Transceiver Number' />
+ <param name='timeslot' doc='TRX Timeslot' />
+ <param name='<0-7>' doc='Timeslot Number' />
+ <param name='pdch' doc='Packet Data Channel' />
+ <param name='activate' doc='Activate Dynamic PDCH/TCH (-> PDCH mode)' />
+ <param name='deactivate' doc='Deactivate Dynamic PDCH/TCH (-> TCH mode)' />
+ </params>
+ </command>
+ <command id='bts <0-255> oml class (site-manager|bts|radio-carrier|baseband-transceiver|channel|adjc|handover|power-contorl|btse|rack|test|envabtse|bport|gprs-nse|gprs-cell|gprs-nsvc|siemenshw) instance <0-255> <0-255> <0-255>'>
+ <params>
+ <param name='bts' doc='BTS related commands' />
+ <param name='<0-255>' doc='BTS Number' />
+ <param name='oml' doc='Manipulate the OML managed objects' />
+ <param name='class' doc='Object Class' />
+ <param name='site-manager' doc='Site Manager Object' />
+ <param name='bts' doc='BTS Object' />
+ <param name='radio-carrier' doc='Radio Carrier Object' />
+ <param name='baseband-transceiver' doc='Baseband Transceiver Object' />
+ <param name='channel' doc='Channel (Timeslot) Object' />
+ <param name='adjc' doc='Adjacent Object (Siemens)' />
+ <param name='handover' doc='Handover Object (Siemens)' />
+ <param name='power-contorl' doc='Power Control Object (Siemens)' />
+ <param name='btse' doc='BTSE Object (Siemens)' />
+ <param name='rack' doc='Rack Object (Siemens)' />
+ <param name='test' doc='Test Object (Siemens)' />
+ <param name='envabtse' doc='ENVABTSE Object (Siemens)' />
+ <param name='bport' doc='BPORT Object (Siemens)' />
+ <param name='gprs-nse' doc='GPRS NSE Object (ip.access/osmo-bts)' />
+ <param name='gprs-cell' doc='GPRS Cell Object (ip.acecss/osmo-bts)' />
+ <param name='gprs-nsvc' doc='GPRS NSVC Object (ip.acecss/osmo-bts)' />
+ <param name='siemenshw' doc='SIEMENSHW Object (Siemens)' />
+ <param name='instance' doc='Object Instance' />
+ <param name='<0-255>' doc='BTS Number' />
+ <param name='<0-255>' doc='TRX Number' />
+ <param name='<0-255>' doc='TS Number' />
+ </params>
+ </command>
+ <command id='bts <0-255> oml class <0-255> instance <0-255> <0-255> <0-255>'>
+ <params>
+ <param name='bts' doc='BTS related commands' />
+ <param name='<0-255>' doc='BTS Number' />
+ <param name='oml' doc='Manipulate the OML managed objects' />
+ <param name='class' doc='Object Class' />
+ <param name='<0-255>' doc='Object Class' />
+ <param name='instance' doc='Object Instance' />
+ <param name='<0-255>' doc='BTS Number' />
+ <param name='<0-255>' doc='TRX Number' />
+ <param name='<0-255>' doc='TS Number' />
+ </params>
+ </command>
+ <command id='bts <0-255> om2000 class (trxc|ts|tf|is|con|dp|cf|tx|rx) <0-255> <0-255> <0-255>'>
+ <params>
+ <param name='bts' doc='BTS related commands' />
+ <param name='<0-255>' doc='BTS Number' />
+ <param name='om2000' doc='Manipulate the OM2000 managed objects' />
+ <param name='class' doc='Object Class' />
+ <param name='trxc' doc='TRX Controller' />
+ <param name='ts' doc='Timeslot' />
+ <param name='tf' doc='Timing Function' />
+ <param name='is' doc='Interface Switch' />
+ <param name='con' doc='Abis Concentrator' />
+ <param name='dp' doc='Digital Path' />
+ <param name='cf' doc='Central Function' />
+ <param name='tx' doc='Transmitter' />
+ <param name='rx' doc='Receiver' />
+ <param name='<0-255>' doc='BTS Number' />
+ <param name='<0-255>' doc='Associated SO Instance' />
+ <param name='<0-255>' doc='Instance Number' />
+ </params>
+ </command>
+ <command id='bts <0-255> om2000 class <0-255> <0-255> <0-255> <0-255>'>
+ <params>
+ <param name='bts' doc='BTS related commands' />
+ <param name='<0-255>' doc='BTS Number' />
+ <param name='om2000' doc='Manipulate the OML managed objects' />
+ <param name='class' doc='Object Class' />
+ <param name='<0-255>' doc='Object Class' />
+ <param name='<0-255>' doc='BTS Number' />
+ <param name='<0-255>' doc='Associated SO Instance' />
+ <param name='<0-255>' doc='Instance Number' />
+ </params>
+ </command>
+ <command id='show e1_driver'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='e1_driver' doc='Display information about available E1 drivers' />
+ </params>
+ </command>
+ <command id='show e1_line [line_nr] [stats]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='e1_line' doc='Display information about a E1 line' />
+ <param name='[line_nr]' doc='E1 Line Number' />
+ <param name='[stats]' doc='Include statistics' />
+ </params>
+ </command>
+ <command id='show e1_timeslot [line_nr] [ts_nr]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='e1_timeslot' doc='Display information about a E1 timeslot' />
+ <param name='[line_nr]' doc='E1 Line Number' />
+ <param name='[ts_nr]' doc='E1 Timeslot Number' />
+ </params>
+ </command>
+ <command id='show statistics'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='statistics' doc='Statistics about the BSC' />
+ </params>
+ </command>
+ <command id='show mscs'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='mscs' doc='MSC Connections and State' />
+ </params>
+ </command>
+ <command id='show position'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='position' doc='Position information of the BTS' />
+ </params>
+ </command>
+ <command id='generate-location-state-trap <0-255>'>
+ <params>
+ <param name='generate-location-state-trap' doc='Generate location state report' />
+ <param name='<0-255>' doc='BTS to report' />
+ </params>
+ </command>
+ </node>
+ <node id='4'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='hostname WORD'>
+ <params>
+ <param name='hostname' doc='Set system's network name' />
+ <param name='WORD' doc='This system's network name' />
+ </params>
+ </command>
+ <command id='no hostname [HOSTNAME]'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='hostname' doc='Reset system's network name' />
+ <param name='[HOSTNAME]' doc='Host name of this router' />
+ </params>
+ </command>
+ <command id='password (8|) WORD'>
+ <params>
+ <param name='password' doc='Assign the terminal connection password' />
+ <param name='8' doc='Specifies a HIDDEN password will follow' />
+ <param name='' doc='dummy string ' />
+ <param name='WORD' doc='The HIDDEN line password string' />
+ </params>
+ </command>
+ <command id='password LINE'>
+ <params>
+ <param name='password' doc='Assign the terminal connection password' />
+ <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
+ </params>
+ </command>
+ <command id='enable password (8|) WORD'>
+ <params>
+ <param name='enable' doc='Modify enable password parameters' />
+ <param name='password' doc='Assign the privileged level password' />
+ <param name='8' doc='Specifies a HIDDEN password will follow' />
+ <param name='' doc='dummy string ' />
+ <param name='WORD' doc='The HIDDEN 'enable' password string' />
+ </params>
+ </command>
+ <command id='enable password LINE'>
+ <params>
+ <param name='enable' doc='Modify enable password parameters' />
+ <param name='password' doc='Assign the privileged level password' />
+ <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
+ </params>
+ </command>
+ <command id='no enable password'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='enable' doc='Modify enable password parameters' />
+ <param name='password' doc='Assign the privileged level password' />
+ </params>
+ </command>
+ <command id='banner motd default'>
+ <params>
+ <param name='banner' doc='Set banner string' />
+ <param name='motd' doc='Strings for motd' />
+ <param name='default' doc='Default string' />
+ </params>
+ </command>
+ <command id='banner motd file [FILE]'>
+ <params>
+ <param name='banner' doc='Set banner' />
+ <param name='motd' doc='Banner for motd' />
+ <param name='file' doc='Banner from a file' />
+ <param name='[FILE]' doc='Filename' />
+ </params>
+ </command>
+ <command id='no banner motd'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='banner' doc='Set banner string' />
+ <param name='motd' doc='Strings for motd' />
+ </params>
+ </command>
+ <command id='service terminal-length <0-512>'>
+ <params>
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='terminal-length' doc='System wide terminal length configuration' />
+ <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
+ </params>
+ </command>
+ <command id='no service terminal-length [<0-512>]'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='terminal-length' doc='System wide terminal length configuration' />
+ <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
+ </params>
+ </command>
+ <command id='line vty'>
+ <params>
+ <param name='line' doc='Configure a terminal line' />
+ <param name='vty' doc='Virtual terminal' />
+ </params>
+ </command>
+ <command id='service advanced-vty'>
+ <params>
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='advanced-vty' doc='Enable advanced mode vty interface' />
+ </params>
+ </command>
+ <command id='no service advanced-vty'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='advanced-vty' doc='Enable advanced mode vty interface' />
+ </params>
+ </command>
+ <command id='show history'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='history' doc='Display the session command history' />
+ </params>
+ </command>
+ <command id='log stderr'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='stderr' doc='Logging via STDERR of the process' />
+ </params>
+ </command>
+ <command id='no log stderr'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='stderr' doc='Logging via STDERR of the process' />
+ </params>
+ </command>
+ <command id='log file .FILENAME'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='file' doc='Logging to text file' />
+ <param name='.FILENAME' doc='Filename' />
+ </params>
+ </command>
+ <command id='no log file .FILENAME'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='file' doc='Logging to text file' />
+ <param name='.FILENAME' doc='Filename' />
+ </params>
+ </command>
+ <command id='log alarms <2-32700>'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='alarms' doc='Logging alarms to osmo_strrb' />
+ <param name='<2-32700>' doc='Maximum number of messages to log' />
+ </params>
+ </command>
+ <command id='no log alarms'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='alarms' doc='Logging alarms to osmo_strrb' />
+ </params>
+ </command>
+ <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='syslog' doc='Logging via syslog' />
+ <param name='authpriv' doc='Security/authorization messages facility' />
+ <param name='cron' doc='Clock daemon (cron/at) facility' />
+ <param name='daemon' doc='General system daemon facility' />
+ <param name='ftp' doc='Ftp daemon facility' />
+ <param name='lpr' doc='Line printer facility' />
+ <param name='mail' doc='Mail facility' />
+ <param name='news' doc='News facility' />
+ <param name='user' doc='Generic facility' />
+ <param name='uucp' doc='UUCP facility' />
+ </params>
+ </command>
+ <command id='log syslog local <0-7>'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='syslog' doc='Logging via syslog' />
+ <param name='local' doc='Syslog LOCAL facility' />
+ <param name='<0-7>' doc='Local facility number' />
+ </params>
+ </command>
+ <command id='no log syslog'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='syslog' doc='Logging via syslog' />
+ </params>
+ </command>
+ <command id='network'>
+ <params>
+ <param name='network' doc='Configure the GSM network' />
+ </params>
+ </command>
+ <command id='e1_input'>
+ <params>
+ <param name='e1_input' doc='Configure E1/T1/J1 TDM input' />
+ </params>
+ </command>
+ <command id='msc [<0-1000>]'>
+ <params>
+ <param name='msc' doc='Configure MSC details' />
+ <param name='[<0-1000>]' doc='MSC connection to configure' />
+ </params>
+ </command>
+ <command id='bsc'>
+ <params>
+ <param name='bsc' doc='Configure BSC' />
+ </params>
+ </command>
+ </node>
+ <node id='7'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='logging filter all (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='all' doc='Do you want to log all messages?' />
+ <param name='0' doc='Only print messages matched by other filters' />
+ <param name='1' doc='Bypass filter and print all messages' />
+ </params>
+ </command>
+ <command id='logging color (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='color' doc='Configure color-printing for log messages' />
+ <param name='0' doc='Don't use color for printing messages' />
+ <param name='1' doc='Use color for printing messages' />
+ </params>
+ </command>
+ <command id='logging timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp' />
+ </params>
+ </command>
+ <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='all' doc='Global setting for all subsystems' />
+ <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
+ <param name='cc' doc='Layer3 Call Control (CC)' />
+ <param name='mm' doc='Layer3 Mobility Management (MM)' />
+ <param name='rr' doc='Layer3 Radio Resource (RR)' />
+ <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
+ <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' />
+ <param name='mncc' doc='MNCC API for Call Control application' />
+ <param name='pag' doc='Paging Subsystem' />
+ <param name='meas' doc='Radio Measurement Processing' />
+ <param name='sccp' doc='SCCP Protocol' />
+ <param name='msc' doc='Mobile Switching Center' />
+ <param name='mgcp' doc='Media Gateway Control Protocol' />
+ <param name='ho' doc='Hand-Over' />
+ <param name='db' doc='Database Layer' />
+ <param name='ref' doc='Reference Counting' />
+ <param name='gprs' doc='GPRS Packet Service' />
+ <param name='ns' doc='GPRS Network Service (NS)' />
+ <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
+ <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
+ <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
+ <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
+ <param name='ctrl' doc='Control interface' />
+ <param name='smpp' doc='SMPP interface for external SMS apps' />
+ <param name='lglobal' doc='Library-internal global log family' />
+ <param name='llapd' doc='LAPD in libosmogsm' />
+ <param name='linp' doc='A-bis Intput Subsystem' />
+ <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+ <param name='lmi' doc='A-bis Input Driver for Signalling' />
+ <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+ <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+ <param name='everything' doc='Log simply everything' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels' />
+ <param name='notice' doc='Log noticable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='logging filter imsi IMSI'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='imsi' doc='Filter log messages by IMSI' />
+ <param name='IMSI' doc='IMSI to be used as filter' />
+ </params>
+ </command>
+ </node>
+ <node id='8'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='login'>
+ <params>
+ <param name='login' doc='Enable password checking' />
+ </params>
+ </command>
+ <command id='no login'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='login' doc='Enable password checking' />
+ </params>
+ </command>
+ </node>
+ <node id='9'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='e1_line <0-255> driver (misdn|misdn_lapd|dahdi|ipa)'>
+ <params>
+ <param name='e1_line' doc='Configure E1/T1/J1 Line' />
+ <param name='<0-255>' doc='Line Number' />
+ <param name='driver' doc='Set driver for this line' />
+ <param name='misdn' doc='mISDN supported E1 Card (kernel LAPD)' />
+ <param name='misdn_lapd' doc='mISDN supported E1 Card (userspace LAPD)' />
+ <param name='dahdi' doc='DAHDI supported E1/T1/J1 Card' />
+ <param name='ipa' doc='IPA TCP/IP input' />
+ </params>
+ </command>
+ <command id='e1_line <0-255> port <0-255>'>
+ <params>
+ <param name='e1_line' doc='Configure E1/T1/J1 Line' />
+ <param name='<0-255>' doc='Line Number' />
+ <param name='port' doc='Set physical port/span/card number' />
+ <param name='<0-255>' doc='E1/T1 Port/Span/Card number' />
+ </params>
+ </command>
+ <command id='e1_line <0-255> name .LINE'>
+ <params>
+ <param name='e1_line' doc='Configure E1/T1/J1 Line' />
+ <param name='<0-255>' doc='Line Number' />
+ <param name='name' doc='Set name for this line' />
+ <param name='.LINE' doc='Human readable name' />
+ </params>
+ </command>
+ <command id='e1_line <0-255> keepalive'>
+ <params>
+ <param name='e1_line' doc='Configure E1/T1/J1 Line' />
+ <param name='<0-255>' doc='Line Number' />
+ <param name='keepalive' doc='Enable keep-alive probing' />
+ </params>
+ </command>
+ <command id='e1_line <0-255> keepalive <1-300> <1-20> <1-300>'>
+ <params>
+ <param name='e1_line' doc='Configure E1/T1/J1 Line' />
+ <param name='<0-255>' doc='Line Number' />
+ <param name='keepalive' doc='Enable keep-alive probing' />
+ <param name='<1-300>' doc='Idle interval in seconds before probes are sent' />
+ <param name='<1-20>' doc='Number of probes to sent' />
+ <param name='<1-300>' doc='Delay between probe packets in seconds' />
+ </params>
+ </command>
+ <command id='no e1_line <0-255> keepalive'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='e1_line' doc='Configure E1/T1/J1 Line' />
+ <param name='<0-255>' doc='Line Number' />
+ <param name='keepalive' doc='Enable keep-alive probing' />
+ </params>
+ </command>
+ </node>
+ <node id='14'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='network country code <1-999>'>
+ <params>
+ <param name='network' doc='Set the GSM network country code' />
+ <param name='country' doc='Country commands' />
+ <param name='code' doc='Code commands' />
+ <param name='<1-999>' doc='Network Country Code to use' />
+ </params>
+ </command>
+ <command id='mobile network code <0-999>'>
+ <params>
+ <param name='mobile' doc='Set the GSM mobile network code' />
+ <param name='network' doc='Network Commands' />
+ <param name='code' doc='Code commands' />
+ <param name='<0-999>' doc='Mobile Network Code to use' />
+ </params>
+ </command>
+ <command id='short name NAME'>
+ <params>
+ <param name='short' doc='Set the short GSM network name' />
+ <param name='name' doc='Name Commands' />
+ <param name='NAME' doc='Name to use' />
+ </params>
+ </command>
+ <command id='long name NAME'>
+ <params>
+ <param name='long' doc='Set the long GSM network name' />
+ <param name='name' doc='Name Commands' />
+ <param name='NAME' doc='Name to use' />
+ </params>
+ </command>
+ <command id='auth policy (closed|accept-all|token)'>
+ <params>
+ <param name='auth' doc='Authentication (not cryptographic)' />
+ <param name='policy' doc='Set the GSM network authentication policy' />
+ <param name='closed' doc='Require the MS to be activated in HLR' />
+ <param name='accept-all' doc='Accept all MS, whether in HLR or not' />
+ <param name='token' doc='Use SMS-token based authentication' />
+ </params>
+ </command>
+ <command id='location updating reject cause <2-111>'>
+ <params>
+ <param name='location' doc='Set the reject cause of location updating reject' />
+ <param name='updating' doc='Set the reject cause of location updating reject' />
+ <param name='reject' doc='Set the reject cause of location updating reject' />
+ <param name='cause' doc='Set the reject cause of location updating reject' />
+ <param name='<2-111>' doc='Cause Value as Per GSM TS 04.08' />
+ </params>
+ </command>
+ <command id='encryption a5 (0|1|2|3)'>
+ <params>
+ <param name='encryption' doc='Encryption options' />
+ <param name='a5' doc='A5 encryption' />
+ <param name='0' doc='A5/0: No encryption' />
+ <param name='1' doc='A5/1: Encryption' />
+ <param name='2' doc='A5/2: Export-grade Encryption' />
+ <param name='3' doc='A5/3: 'New' Secure Encryption' />
+ </params>
+ </command>
+ <command id='neci (0|1)'>
+ <params>
+ <param name='neci' doc='New Establish Cause Indication' />
+ <param name='0' doc='Don't set the NECI bit' />
+ <param name='1' doc='Set the NECI bit' />
+ </params>
+ </command>
+ <command id='rrlp mode (none|ms-based|ms-preferred|ass-preferred)'>
+ <params>
+ <param name='rrlp' doc='Radio Resource Location Protocol' />
+ <param name='mode' doc='Set the Radio Resource Location Protocol Mode' />
+ <param name='none' doc='Don't send RRLP request' />
+ <param name='ms-based' doc='Request MS-based location' />
+ <param name='ms-preferred' doc='Request any location, prefer MS-based' />
+ <param name='ass-preferred' doc='Request any location, prefer MS-assisted' />
+ </params>
+ </command>
+ <command id='mm info (0|1)'>
+ <params>
+ <param name='mm' doc='Mobility Management' />
+ <param name='info' doc='Send MM INFO after LOC UPD ACCEPT' />
+ <param name='0' doc='Disable' />
+ <param name='1' doc='Enable' />
+ </params>
+ </command>
+ <command id='handover (0|1)'>
+ <params>
+ <param name='handover' doc='Handover Options' />
+ <param name='0' doc='Don't perform in-call handover' />
+ <param name='1' doc='Perform in-call handover' />
+ </params>
+ </command>
+ <command id='handover window rxlev averaging <1-10>'>
+ <params>
+ <param name='handover' doc='Handover Options' />
+ <param name='window' doc='Measurement Window' />
+ <param name='rxlev' doc='Received Level Averaging' />
+ <param name='averaging' doc='How many RxLev measurements are used for averaging' />
+ <param name='<1-10>' doc='Amount to use for Averaging' />
+ </params>
+ </command>
+ <command id='handover window rxqual averaging <1-10>'>
+ <params>
+ <param name='handover' doc='Handover Options' />
+ <param name='window' doc='Measurement Window' />
+ <param name='rxqual' doc='Received Quality Averaging' />
+ <param name='averaging' doc='How many RxQual measurements are used for averaging' />
+ <param name='<1-10>' doc='Amount to use for Averaging' />
+ </params>
+ </command>
+ <command id='handover window rxlev neighbor averaging <1-10>'>
+ <params>
+ <param name='handover' doc='Handover Options' />
+ <param name='window' doc='Measurement Window' />
+ <param name='rxlev' doc='Received Level Averaging' />
+ <param name='neighbor' doc='Neighbor' />
+ <param name='averaging' doc='How many RxQual measurements are used for averaging' />
+ <param name='<1-10>' doc='Amount to use for Averaging' />
+ </params>
+ </command>
+ <command id='handover power budget interval <1-99>'>
+ <params>
+ <param name='handover' doc='Handover Options' />
+ <param name='power' doc='Power Budget' />
+ <param name='budget' doc='How often to check if we have a better cell (SACCH frames)' />
+ <param name='interval' doc='Interval' />
+ <param name='<1-99>' doc='Number' />
+ </params>
+ </command>
+ <command id='handover power budget hysteresis <0-999>'>
+ <params>
+ <param name='handover' doc='Handover Options' />
+ <param name='power' doc='Power Budget' />
+ <param name='budget' doc='How many dB does a neighbor to be stronger to become a HO candidate' />
+ <param name='hysteresis' doc='Hysteresis' />
+ <param name='<0-999>' doc='Number' />
+ </params>
+ </command>
+ <command id='handover maximum distance <0-9999>'>
+ <params>
+ <param name='handover' doc='Handover Options' />
+ <param name='maximum' doc='How big is the maximum timing advance before HO is forced' />
+ <param name='distance' doc='Distance' />
+ <param name='<0-9999>' doc='Number' />
+ </params>
+ </command>
+ <command id='timer t3101 <0-65535>'>
+ <params>
+ <param name='timer' doc='Configure GSM Timers' />
+ <param name='t3101' doc='Set the timeout value for IMMEDIATE ASSIGNMENT.' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='timer t3103 <0-65535>'>
+ <params>
+ <param name='timer' doc='Configure GSM Timers' />
+ <param name='t3103' doc='Set the timeout value for HANDOVER.' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='timer t3105 <0-65535>'>
+ <params>
+ <param name='timer' doc='Configure GSM Timers' />
+ <param name='t3105' doc='Set the timer for repetition of PHYSICAL INFORMATION.' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='timer t3107 <0-65535>'>
+ <params>
+ <param name='timer' doc='Configure GSM Timers' />
+ <param name='t3107' doc='Currently not used.' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='timer t3109 <0-65535>'>
+ <params>
+ <param name='timer' doc='Configure GSM Timers' />
+ <param name='t3109' doc='Set the RSL SACCH deactivation timeout.' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='timer t3111 <0-65535>'>
+ <params>
+ <param name='timer' doc='Configure GSM Timers' />
+ <param name='t3111' doc='Set the RSL timeout to wait before releasing the RF Channel.' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='timer t3113 <0-65535>'>
+ <params>
+ <param name='timer' doc='Configure GSM Timers' />
+ <param name='t3113' doc='Set the time to try paging a subscriber.' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='timer t3115 <0-65535>'>
+ <params>
+ <param name='timer' doc='Configure GSM Timers' />
+ <param name='t3115' doc='Currently not used.' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='timer t3117 <0-65535>'>
+ <params>
+ <param name='timer' doc='Configure GSM Timers' />
+ <param name='t3117' doc='Currently not used.' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='timer t3119 <0-65535>'>
+ <params>
+ <param name='timer' doc='Configure GSM Timers' />
+ <param name='t3119' doc='Currently not used.' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='timer t3122 <0-65535>'>
+ <params>
+ <param name='timer' doc='Configure GSM Timers' />
+ <param name='t3122' doc='Waiting time (seconds) after IMM ASS REJECT' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='timer t3141 <0-65535>'>
+ <params>
+ <param name='timer' doc='Configure GSM Timers' />
+ <param name='t3141' doc='Currently not used.' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='dtx-used (0|1)'>
+ <params>
+ <param name='dtx-used' doc='Enable the usage of DTX.' />
+ <param name='0' doc='DTX is disabled' />
+ <param name='1' doc='DTX is enabled' />
+ </params>
+ </command>
+ <command id='subscriber-keep-in-ram (0|1)'>
+ <params>
+ <param name='subscriber-keep-in-ram' doc='Keep unused subscribers in RAM.' />
+ <param name='0' doc='Delete unused subscribers' />
+ <param name='1' doc='Keep unused subscribers' />
+ </params>
+ </command>
+ <command id='paging any use tch (0|1)'>
+ <params>
+ <param name='paging' doc='Assign a TCH when receiving a Paging Any request' />
+ <param name='any' doc='Any Channel' />
+ <param name='use' doc='Use' />
+ <param name='tch' doc='TCH' />
+ <param name='0' doc='Do not use TCH for Paging Request Any' />
+ <param name='1' doc='Do use TCH for Paging Request Any' />
+ </params>
+ </command>
+ <command id='bts <0-255>'>
+ <params>
+ <param name='bts' doc='Select a BTS to configure' />
+ <param name='<0-255>' doc='BTS Number' />
+ </params>
+ </command>
+ </node>
+ <node id='15'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='type (unknown|bs11|nanobts|rbs2000|nokia_site|sysmobts)'>
+ <params>
+ <param name='type' doc='BTS Vendor/Type' />
+ <param name='unknown' doc='Unknown BTS Type' />
+ <param name='bs11' doc='Siemens BTS (BS-11 or compatible)' />
+ <param name='nanobts' doc='ip.access nanoBTS or compatible' />
+ <param name='rbs2000' doc='Ericsson RBS2000 Series' />
+ <param name='nokia_site' doc='Nokia {Metro,Ultra,In}Site' />
+ <param name='sysmobts' doc='sysmocom sysmoBTS' />
+ </params>
+ </command>
+ <command id='description .TEXT'>
+ <params>
+ <param name='description' doc='Save human-readable decription of the object' />
+ <param name='.TEXT' doc='Text until the end of the line' />
+ </params>
+ </command>
+ <command id='no description'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='description' doc='Remove description of the object' />
+ </params>
+ </command>
+ <command id='band BAND'>
+ <params>
+ <param name='band' doc='Set the frequency band of this BTS' />
+ <param name='BAND' doc='Frequency band' />
+ </params>
+ </command>
+ <command id='cell_identity <0-65535>'>
+ <params>
+ <param name='cell_identity' doc='Set the Cell identity of this BTS' />
+ <param name='<0-65535>' doc='Cell Identity' />
+ </params>
+ </command>
+ <command id='location_area_code <0-65535>'>
+ <params>
+ <param name='location_area_code' doc='Set the Location Area Code (LAC) of this BTS' />
+ <param name='<0-65535>' doc='LAC' />
+ </params>
+ </command>
+ <command id='training_sequence_code <0-7>'>
+ <params>
+ <param name='training_sequence_code' doc='Set the Training Sequence Code (TSC) of this BTS' />
+ <param name='<0-7>' doc='TSC' />
+ </params>
+ </command>
+ <command id='base_station_id_code <0-63>'>
+ <params>
+ <param name='base_station_id_code' doc='Set the Base Station Identity Code (BSIC) of this BTS' />
+ <param name='<0-63>' doc='BSIC of this BTS' />
+ </params>
+ </command>
+ <command id='ip.access unit_id <0-65534> <0-255>'>
+ <params>
+ <param name='ip.access' doc='Abis/IP specific options' />
+ <param name='unit_id' doc='Set the IPA BTS Unit ID' />
+ <param name='<0-65534>' doc='Unit ID (Site)' />
+ <param name='<0-255>' doc='Unit ID (BTS)' />
+ </params>
+ </command>
+ <command id='ip.access rsl-ip A.B.C.D'>
+ <params>
+ <param name='ip.access' doc='Abis/IP specific options' />
+ <param name='rsl-ip' doc='Set the IPA RSL IP Address of the BSC' />
+ <param name='A.B.C.D' doc='Destination IP address for RSL connection' />
+ </params>
+ </command>
+ <command id='timezone <-19-19> (0|15|30|45)'>
+ <params>
+ <param name='timezone' doc='Set the Timezone Offset of this BTS' />
+ <param name='<-19-19>' doc='Timezone offset (hours)' />
+ <param name='0' doc='Timezone offset (00 minutes)' />
+ <param name='15' doc='Timezone offset (15 minutes)' />
+ <param name='30' doc='Timezone offset (30 minutes)' />
+ <param name='45' doc='Timezone offset (45 minutes)' />
+ </params>
+ </command>
+ <command id='timezone <-19-19> (0|15|30|45) <0-2>'>
+ <params>
+ <param name='timezone' doc='Set the Timezone Offset of this BTS' />
+ <param name='<-19-19>' doc='Timezone offset (hours)' />
+ <param name='0' doc='Timezone offset (00 minutes)' />
+ <param name='15' doc='Timezone offset (15 minutes)' />
+ <param name='30' doc='Timezone offset (30 minutes)' />
+ <param name='45' doc='Timezone offset (45 minutes)' />
+ <param name='<0-2>' doc='DST offset (hours)' />
+ </params>
+ </command>
+ <command id='no timezone'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='timezone' doc='Disable BTS specific timezone' />
+ </params>
+ </command>
+ <command id='nokia_site skip-reset (0|1)'>
+ <params>
+ <param name='nokia_site' doc='Nokia *Site related commands' />
+ <param name='skip-reset' doc='Skip the reset step during bootstrap process of this BTS' />
+ <param name='0' doc='Do NOT skip the reset' />
+ <param name='1' doc='Skip the reset' />
+ </params>
+ </command>
+ <command id='nokia_site no-local-rel-conf (0|1)'>
+ <params>
+ <param name='nokia_site' doc='Nokia *Site related commands' />
+ <param name='no-local-rel-conf' doc='Do not wait for RELease CONFirm message when releasing channel locally' />
+ <param name='0' doc='Wait for RELease CONFirm' />
+ <param name='1' doc='Do not wait for RELease CONFirm' />
+ </params>
+ </command>
+ <command id='oml ip.access stream_id <0-255> line E1_LINE'>
+ <params>
+ <param name='oml' doc='Organization & Maintenance Link' />
+ <param name='ip.access' doc='A-bis/IP Specific Options' />
+ <param name='stream_id' doc='Set the ip.access Stream ID of the OML link of this BTS' />
+ <param name='<0-255>' doc='Stream Identifier' />
+ <param name='line' doc='Virtual E1 Line Number' />
+ <param name='E1_LINE' doc='Virtual E1 Line Number' />
+ </params>
+ </command>
+ <command id='oml e1 line E1_LINE timeslot <1-31> sub-slot (0|1|2|3|full)'>
+ <params>
+ <param name='oml' doc='Organization & Maintenance Link' />
+ <param name='e1' doc='OML E1/T1 Configuration' />
+ <param name='line' doc='E1/T1 line number to be used for OML' />
+ <param name='E1_LINE' doc='E1/T1 line number to be used for OML' />
+ <param name='timeslot' doc='E1/T1 timeslot to be used for OML' />
+ <param name='<1-31>' doc='E1/T1 timeslot to be used for OML' />
+ <param name='sub-slot' doc='E1/T1 sub-slot to be used for OML' />
+ <param name='0' doc='Use E1/T1 sub-slot 0' />
+ <param name='1' doc='Use E1/T1 sub-slot 1' />
+ <param name='2' doc='Use E1/T1 sub-slot 2' />
+ <param name='3' doc='Use E1/T1 sub-slot 3' />
+ <param name='full' doc='Use full E1 slot 3' />
+ </params>
+ </command>
+ <command id='oml e1 tei <0-63>'>
+ <params>
+ <param name='oml' doc='Organization & Maintenance Link' />
+ <param name='e1' doc='OML E1/T1 Configuration' />
+ <param name='tei' doc='Set the TEI to be used for OML' />
+ <param name='<0-63>' doc='TEI Number' />
+ </params>
+ </command>
+ <command id='channel allocator (ascending|descending)'>
+ <params>
+ <param name='channel' doc='Channnel Allocator' />
+ <param name='allocator' doc='Channel Allocator' />
+ <param name='ascending' doc='Allocate Timeslots and Transceivers in ascending order' />
+ <param name='descending' doc='Allocate Timeslots and Transceivers in descending order' />
+ </params>
+ </command>
+ <command id='rach tx integer <0-15>'>
+ <params>
+ <param name='rach' doc='Random Access Control Channel' />
+ <param name='tx' doc='Set the raw tx integer value in RACH Control parameters IE' />
+ <param name='integer' doc='Set the raw tx integer value in RACH Control parameters IE' />
+ <param name='<0-15>' doc='Raw tx integer value in RACH Control parameters IE' />
+ </params>
+ </command>
+ <command id='rach max transmission (1|2|4|7)'>
+ <params>
+ <param name='rach' doc='Random Access Control Channel' />
+ <param name='max' doc='Set the maximum number of RACH burst transmissions' />
+ <param name='transmission' doc='Set the maximum number of RACH burst transmissions' />
+ <param name='1' doc='Maximum number of 1 RACH burst transmissions' />
+ <param name='2' doc='Maximum number of 2 RACH burst transmissions' />
+ <param name='4' doc='Maximum number of 4 RACH burst transmissions' />
+ <param name='7' doc='Maximum number of 7 RACH burst transmissions' />
+ </params>
+ </command>
+ <command id='channel-descrption attach (0|1)'>
+ <params>
+ <param name='channel-descrption' doc='Channel Description' />
+ <param name='attach' doc='Set if attachment is required' />
+ <param name='0' doc='Attachment is NOT required' />
+ <param name='1' doc='Attachment is required (standard)' />
+ </params>
+ </command>
+ <command id='channel-descrption bs-pa-mfrms <2-9>'>
+ <params>
+ <param name='channel-descrption' doc='Channel Description' />
+ <param name='bs-pa-mfrms' doc='Set number of multiframe periods for paging groups' />
+ <param name='<2-9>' doc='Number of multiframe periods for paging groups' />
+ </params>
+ </command>
+ <command id='channel-descrption bs-ag-blks-res <0-7>'>
+ <params>
+ <param name='channel-descrption' doc='Channel Description' />
+ <param name='bs-ag-blks-res' doc='Set number of blocks reserved for access grant' />
+ <param name='<0-7>' doc='Number of blocks reserved for access grant' />
+ </params>
+ </command>
+ <command id='rach nm busy threshold <0-255>'>
+ <params>
+ <param name='rach' doc='Random Access Control Channel' />
+ <param name='nm' doc='Network Management' />
+ <param name='busy' doc='Set the NM Busy Threshold' />
+ <param name='threshold' doc='Set the NM Busy Threshold' />
+ <param name='<0-255>' doc='NM Busy Threshold in dB' />
+ </params>
+ </command>
+ <command id='rach nm load average <0-65535>'>
+ <params>
+ <param name='rach' doc='Random Access Control Channel' />
+ <param name='nm' doc='Network Management' />
+ <param name='load' doc='Set the NM Loadaverage Slots value' />
+ <param name='average' doc='Set the NM Loadaverage Slots value' />
+ <param name='<0-65535>' doc='NM Loadaverage Slots value' />
+ </params>
+ </command>
+ <command id='cell barred (0|1)'>
+ <params>
+ <param name='cell' doc='Should this cell be barred from access?' />
+ <param name='barred' doc='Should this cell be barred from access?' />
+ <param name='0' doc='Cell should NOT be barred' />
+ <param name='1' doc='Cell should be barred' />
+ </params>
+ </command>
+ <command id='rach emergency call allowed (0|1)'>
+ <params>
+ <param name='rach' doc='Random Access Control Channel' />
+ <param name='emergency' doc='Should this cell allow emergency calls?' />
+ <param name='call' doc='Should this cell allow emergency calls?' />
+ <param name='allowed' doc='Should this cell allow emergency calls?' />
+ <param name='0' doc='Do NOT allow emergency calls' />
+ <param name='1' doc='Allow emergency calls' />
+ </params>
+ </command>
+ <command id='rach access-control-class (0|1|2|3|4|5|6|7|8|9|11|12|13|14|15) (barred|allowed)'>
+ <params>
+ <param name='rach' doc='Random Access Control Channel' />
+ <param name='access-control-class' doc='Set access control class' />
+ <param name='0' doc='Access control class 0' />
+ <param name='1' doc='Access control class 1' />
+ <param name='2' doc='Access control class 2' />
+ <param name='3' doc='Access control class 3' />
+ <param name='4' doc='Access control class 4' />
+ <param name='5' doc='Access control class 5' />
+ <param name='6' doc='Access control class 6' />
+ <param name='7' doc='Access control class 7' />
+ <param name='8' doc='Access control class 8' />
+ <param name='9' doc='Access control class 9' />
+ <param name='11' doc='Access control class 11 for PLMN use' />
+ <param name='12' doc='Access control class 12 for security services' />
+ <param name='13' doc='Access control class 13 for public utilities (e.g. water/gas suppliers)' />
+ <param name='14' doc='Access control class 14 for emergency services' />
+ <param name='15' doc='Access control class 15 for PLMN staff' />
+ <param name='barred' doc='barred to use access control class' />
+ <param name='allowed' doc='allowed to use access control class' />
+ </params>
+ </command>
+ <command id='ms max power <0-40>'>
+ <params>
+ <param name='ms' doc='MS Options' />
+ <param name='max' doc='Maximum transmit power of the MS' />
+ <param name='power' doc='Maximum transmit power of the MS' />
+ <param name='<0-40>' doc='Maximum transmit power of the MS in dBm' />
+ </params>
+ </command>
+ <command id='periodic location update <6-1530>'>
+ <params>
+ <param name='periodic' doc='Periodic Location Updating Interval' />
+ <param name='location' doc='Periodic Location Updating Interval' />
+ <param name='update' doc='Periodic Location Updating Interval' />
+ <param name='<6-1530>' doc='Periodic Location Updating Interval in Minutes' />
+ </params>
+ </command>
+ <command id='no periodic location update'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='periodic' doc='Periodic Location Updating Interval' />
+ <param name='location' doc='Periodic Location Updating Interval' />
+ <param name='update' doc='Periodic Location Updating Interval' />
+ </params>
+ </command>
+ <command id='cell reselection hysteresis <0-14>'>
+ <params>
+ <param name='cell' doc='Cell Parameters' />
+ <param name='reselection' doc='Cell re-selection parameters' />
+ <param name='hysteresis' doc='Cell Re-Selection Hysteresis in dB' />
+ <param name='<0-14>' doc='Cell Re-Selection Hysteresis in dB' />
+ </params>
+ </command>
+ <command id='rxlev access min <0-63>'>
+ <params>
+ <param name='rxlev' doc='Minimum RxLev needed for cell access' />
+ <param name='access' doc='Minimum RxLev needed for cell access' />
+ <param name='min' doc='Minimum RxLev needed for cell access' />
+ <param name='<0-63>' doc='Minimum RxLev needed for cell access (better than -110dBm)' />
+ </params>
+ </command>
+ <command id='cell bar qualify (0|1)'>
+ <params>
+ <param name='cell' doc='Cell Parameters' />
+ <param name='bar' doc='Cell Bar Qualify' />
+ <param name='qualify' doc='Cell Bar Qualify' />
+ <param name='0' doc='Set CBQ to 0' />
+ <param name='1' doc='Set CBQ to 1' />
+ </params>
+ </command>
+ <command id='cell reselection offset <0-126>'>
+ <params>
+ <param name='cell' doc='Cell Parameters' />
+ <param name='reselection' doc='Cell Re-Selection Parameters' />
+ <param name='offset' doc='Cell Re-Selection Offset (CRO) in dB' />
+ <param name='<0-126>' doc='Cell Re-Selection Offset (CRO) in dB' />
+ </params>
+ </command>
+ <command id='temporary offset <0-60>'>
+ <params>
+ <param name='temporary' doc='Cell selection temporary negative offset' />
+ <param name='offset' doc='Cell selection temporary negative offset' />
+ <param name='<0-60>' doc='Cell selection temporary negative offset in dB' />
+ </params>
+ </command>
+ <command id='temporary offset infinite'>
+ <params>
+ <param name='temporary' doc='Cell selection temporary negative offset' />
+ <param name='offset' doc='Cell selection temporary negative offset' />
+ <param name='infinite' doc='Sets cell selection temporary negative offset to infinity' />
+ </params>
+ </command>
+ <command id='penalty time <20-620>'>
+ <params>
+ <param name='penalty' doc='Cell selection penalty time' />
+ <param name='time' doc='Cell selection penalty time' />
+ <param name='<20-620>' doc='Cell selection penalty time in seconds (by 20s increments)' />
+ </params>
+ </command>
+ <command id='penalty time reserved'>
+ <params>
+ <param name='penalty' doc='Cell selection penalty time' />
+ <param name='time' doc='Cell selection penalty time' />
+ <param name='reserved' doc='Set cell selection penalty time to reserved value 31, (indicate that CELL_RESELECT_OFFSET is subtracted from C2 and TEMPORARY_OFFSET is ignored)' />
+ </params>
+ </command>
+ <command id='gprs mode (none|gprs|egprs)'>
+ <params>
+ <param name='gprs' doc='GPRS Packet Network' />
+ <param name='mode' doc='GPRS Mode for this BTS' />
+ <param name='none' doc='GPRS Disabled on this BTS' />
+ <param name='gprs' doc='GPRS Enabled on this BTS' />
+ <param name='egprs' doc='EGPRS (EDGE) Enabled on this BTS' />
+ </params>
+ </command>
+ <command id='gprs ns timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries) <0-255>'>
+ <params>
+ <param name='gprs' doc='GPRS Packet Network' />
+ <param name='ns' doc='Network Service' />
+ <param name='timer' doc='Network Service Timer' />
+ <param name='tns-block' doc='(un)blocking Timer (Tns-block) timeout' />
+ <param name='tns-block-retries' doc='(un)blocking Timer (Tns-block) number of retries' />
+ <param name='tns-reset' doc='Reset Timer (Tns-reset) timeout' />
+ <param name='tns-reset-retries' doc='Reset Timer (Tns-reset) number of retries' />
+ <param name='tns-test' doc='Test Timer (Tns-test) timeout' />
+ <param name='tns-alive' doc='Alive Timer (Tns-alive) timeout' />
+ <param name='tns-alive-retries' doc='Alive Timer (Tns-alive) number of retries' />
+ <param name='<0-255>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='gprs routing area <0-255>'>
+ <params>
+ <param name='gprs' doc='GPRS Packet Network' />
+ <param name='routing' doc='GPRS Routing Area Code' />
+ <param name='area' doc='GPRS Routing Area Code' />
+ <param name='<0-255>' doc='GPRS Routing Area Code' />
+ </params>
+ </command>
+ <command id='gprs network-control-order (nc0|nc1|nc2)'>
+ <params>
+ <param name='gprs' doc='GPRS Packet Network' />
+ <param name='network-control-order' doc='GPRS Network Control Order' />
+ <param name='nc0' doc='MS controlled cell re-selection, no measurement reporting' />
+ <param name='nc1' doc='MS controlled cell re-selection, MS sends measurement reports' />
+ <param name='nc2' doc='Network controlled cell re-selection, MS sends measurement reports' />
+ </params>
+ </command>
+ <command id='gprs cell bvci <2-65535>'>
+ <params>
+ <param name='gprs' doc='GPRS Packet Network' />
+ <param name='cell' doc='GPRS Cell Settings' />
+ <param name='bvci' doc='GPRS BSSGP VC Identifier' />
+ <param name='<2-65535>' doc='GPRS BSSGP VC Identifier' />
+ </params>
+ </command>
+ <command id='gprs cell timer (blocking-timer|blocking-retries|unblocking-retries|reset-timer|reset-retries|suspend-timer|suspend-retries|resume-timer|resume-retries|capability-update-timer|capability-update-retries) <0-255>'>
+ <params>
+ <param name='gprs' doc='GPRS Packet Network' />
+ <param name='cell' doc='Cell / BSSGP' />
+ <param name='timer' doc='Cell/BSSGP Timer' />
+ <param name='blocking-timer' doc='Tbvc-block timeout' />
+ <param name='blocking-retries' doc='Tbvc-block retries' />
+ <param name='unblocking-retries' doc='Tbvc-unblock retries' />
+ <param name='reset-timer' doc='Tbvcc-reset timeout' />
+ <param name='reset-retries' doc='Tbvc-reset retries' />
+ <param name='suspend-timer' doc='Tbvc-suspend timeout' />
+ <param name='suspend-retries' doc='Tbvc-suspend retries' />
+ <param name='resume-timer' doc='Tbvc-resume timeout' />
+ <param name='resume-retries' doc='Tbvc-resume retries' />
+ <param name='capability-update-timer' doc='Tbvc-capa-update timeout' />
+ <param name='capability-update-retries' doc='Tbvc-capa-update retries' />
+ <param name='<0-255>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='gprs nsei <0-65535>'>
+ <params>
+ <param name='gprs' doc='GPRS Packet Network' />
+ <param name='nsei' doc='GPRS NS Entity Identifier' />
+ <param name='<0-65535>' doc='GPRS NS Entity Identifier' />
+ </params>
+ </command>
+ <command id='gprs nsvc <0-1> nsvci <0-65535>'>
+ <params>
+ <param name='gprs' doc='GPRS Packet Network' />
+ <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' />
+ <param name='<0-1>' doc='NSVC Logical Number' />
+ <param name='nsvci' doc='NS Virtual Connection Identifier' />
+ <param name='<0-65535>' doc='GPRS NS VC Identifier' />
+ </params>
+ </command>
+ <command id='gprs nsvc <0-1> local udp port <0-65535>'>
+ <params>
+ <param name='gprs' doc='GPRS Packet Network' />
+ <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' />
+ <param name='<0-1>' doc='NSVC Logical Number' />
+ <param name='local' doc='GPRS NS Local UDP Port' />
+ <param name='udp' doc='GPRS NS Local UDP Port' />
+ <param name='port' doc='GPRS NS Local UDP Port' />
+ <param name='<0-65535>' doc='GPRS NS Local UDP Port Number' />
+ </params>
+ </command>
+ <command id='gprs nsvc <0-1> remote udp port <0-65535>'>
+ <params>
+ <param name='gprs' doc='GPRS Packet Network' />
+ <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' />
+ <param name='<0-1>' doc='NSVC Logical Number' />
+ <param name='remote' doc='GPRS NS Remote UDP Port' />
+ <param name='udp' doc='GPRS NS Remote UDP Port' />
+ <param name='port' doc='GPRS NS Remote UDP Port' />
+ <param name='<0-65535>' doc='GPRS NS Remote UDP Port Number' />
+ </params>
+ </command>
+ <command id='gprs nsvc <0-1> remote ip A.B.C.D'>
+ <params>
+ <param name='gprs' doc='GPRS Packet Network' />
+ <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' />
+ <param name='<0-1>' doc='NSVC Logical Number' />
+ <param name='remote' doc='GPRS NS Remote IP Address' />
+ <param name='ip' doc='GPRS NS Remote IP Address' />
+ <param name='A.B.C.D' doc='GPRS NS Remote IP Address' />
+ </params>
+ </command>
+ <command id='paging free <-1-1024>'>
+ <params>
+ <param name='paging' doc='Paging options' />
+ <param name='free' doc='Only page when having a certain amount of free slots' />
+ <param name='<-1-1024>' doc='amount of required free paging slots. -1 to disable' />
+ </params>
+ </command>
+ <command id='system-information (1|2|3|4|5|6|7|8|9|10|13|16|17|18|19|20|2bis|2ter|2quater|5bis|5ter) mode (static|computed)'>
+ <params>
+ <param name='system-information' doc='System Information Messages' />
+ <param name='1' doc='System Information Type 1' />
+ <param name='2' doc='System Information Type 2' />
+ <param name='3' doc='System Information Type 3' />
+ <param name='4' doc='System Information Type 4' />
+ <param name='5' doc='System Information Type 5' />
+ <param name='6' doc='System Information Type 6' />
+ <param name='7' doc='System Information Type 7' />
+ <param name='8' doc='System Information Type 8' />
+ <param name='9' doc='System Information Type 9' />
+ <param name='10' doc='System Information Type 10' />
+ <param name='13' doc='System Information Type 13' />
+ <param name='16' doc='System Information Type 16' />
+ <param name='17' doc='System Information Type 17' />
+ <param name='18' doc='System Information Type 18' />
+ <param name='19' doc='System Information Type 19' />
+ <param name='20' doc='System Information Type 20' />
+ <param name='2bis' doc='System Information Type 2bis' />
+ <param name='2ter' doc='System Information Type 2ter' />
+ <param name='2quater' doc='System Information Type 2quater' />
+ <param name='5bis' doc='System Information Type 5bis' />
+ <param name='5ter' doc='System Information Type 5ter' />
+ <param name='mode' doc='System Information Mode' />
+ <param name='static' doc='Static user-specified' />
+ <param name='computed' doc='Dynamic, BSC-computed' />
+ </params>
+ </command>
+ <command id='system-information (1|2|3|4|5|6|7|8|9|10|13|16|17|18|19|20|2bis|2ter|2quater|5bis|5ter) static HEXSTRING'>
+ <params>
+ <param name='system-information' doc='System Information Messages' />
+ <param name='1' doc='System Information Type 1' />
+ <param name='2' doc='System Information Type 2' />
+ <param name='3' doc='System Information Type 3' />
+ <param name='4' doc='System Information Type 4' />
+ <param name='5' doc='System Information Type 5' />
+ <param name='6' doc='System Information Type 6' />
+ <param name='7' doc='System Information Type 7' />
+ <param name='8' doc='System Information Type 8' />
+ <param name='9' doc='System Information Type 9' />
+ <param name='10' doc='System Information Type 10' />
+ <param name='13' doc='System Information Type 13' />
+ <param name='16' doc='System Information Type 16' />
+ <param name='17' doc='System Information Type 17' />
+ <param name='18' doc='System Information Type 18' />
+ <param name='19' doc='System Information Type 19' />
+ <param name='20' doc='System Information Type 20' />
+ <param name='2bis' doc='System Information Type 2bis' />
+ <param name='2ter' doc='System Information Type 2ter' />
+ <param name='2quater' doc='System Information Type 2quater' />
+ <param name='5bis' doc='System Information Type 5bis' />
+ <param name='5ter' doc='System Information Type 5ter' />
+ <param name='static' doc='Static System Information filling' />
+ <param name='HEXSTRING' doc='Static user-specified SI content in HEX notation' />
+ </params>
+ </command>
+ <command id='neighbor-list mode (automatic|manual|manual-si5)'>
+ <params>
+ <param name='neighbor-list' doc='Neighbor List' />
+ <param name='mode' doc='Mode of Neighbor List generation' />
+ <param name='automatic' doc='Automatically from all BTS in this OpenBSC' />
+ <param name='manual' doc='Manual' />
+ <param name='manual-si5' doc='Manual with different lists for SI2 and SI5' />
+ </params>
+ </command>
+ <command id='neighbor-list (add|del) arfcn <0-1023>'>
+ <params>
+ <param name='neighbor-list' doc='Neighbor List' />
+ <param name='add' doc='Add to manual neighbor list' />
+ <param name='del' doc='Delete from manual neighbor list' />
+ <param name='arfcn' doc='ARFCN of neighbor' />
+ <param name='<0-1023>' doc='ARFCN of neighbor' />
+ </params>
+ </command>
+ <command id='si5 neighbor-list (add|del) arfcn <0-1023>'>
+ <params>
+ <param name='si5' doc='SI5 Neighbor List' />
+ <param name='neighbor-list' doc='SI5 Neighbor List' />
+ <param name='add' doc='Add to manual SI5 neighbor list' />
+ <param name='del' doc='Delete from SI5 manual neighbor list' />
+ <param name='arfcn' doc='ARFCN of neighbor' />
+ <param name='<0-1023>' doc='ARFCN of neighbor' />
+ </params>
+ </command>
+ <command id='rf-lock-exclude'>
+ <params>
+ <param name='rf-lock-exclude' doc='Exclude this BTS from the global RF Lock' />
+ </params>
+ </command>
+ <command id='no rf-lock-exclude'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='rf-lock-exclude' doc='Exclude this BTS from the global RF Lock' />
+ </params>
+ </command>
+ <command id='force-combined-si'>
+ <params>
+ <param name='force-combined-si' doc='Force the generation of a single SI (no ter/bis)' />
+ </params>
+ </command>
+ <command id='no force-combined-si'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='force-combined-si' doc='Force the generation of a single SI (no ter/bis)' />
+ </params>
+ </command>
+ <command id='codec-support fr'>
+ <params>
+ <param name='codec-support' doc='Codec Support settings' />
+ <param name='fr' doc='Fullrate' />
+ </params>
+ </command>
+ <command id='codec-support fr (hr|efr|amr)'>
+ <params>
+ <param name='codec-support' doc='Codec Support settings' />
+ <param name='fr' doc='Fullrate' />
+ <param name='hr' doc='Half Rate' />
+ <param name='efr' doc='Enhanced Full Rate' />
+ <param name='amr' doc='Adaptive Multirate' />
+ </params>
+ </command>
+ <command id='codec-support fr (hr|efr|amr) (hr|efr|amr)'>
+ <params>
+ <param name='codec-support' doc='Codec Support settings' />
+ <param name='fr' doc='Fullrate' />
+ <param name='hr' doc='Half Rate' />
+ <param name='efr' doc='Enhanced Full Rate' />
+ <param name='amr' doc='Adaptive Multirate' />
+ <param name='hr' doc='Half Rate' />
+ <param name='efr' doc='Enhanced Full Rate' />
+ <param name='amr' doc='Adaptive Multirate' />
+ </params>
+ </command>
+ <command id='codec-support fr (hr|efr|amr) (hr|efr|amr) (hr|efr|amr)'>
+ <params>
+ <param name='codec-support' doc='Codec Support settings' />
+ <param name='fr' doc='Fullrate' />
+ <param name='hr' doc='Half Rate' />
+ <param name='efr' doc='Enhanced Full Rate' />
+ <param name='amr' doc='Adaptive Multirate' />
+ <param name='hr' doc='Half Rate' />
+ <param name='efr' doc='Enhanced Full Rate' />
+ <param name='amr' doc='Adaptive Multirate' />
+ <param name='hr' doc='Half Rate' />
+ <param name='efr' doc='Enhanced Full Rate' />
+ <param name='amr' doc='Adaptive Multirate' />
+ </params>
+ </command>
+ <command id='codec-support fr (hr|efr|amr) (hr|efr|amr) (hr|efr|amr) (hr|efr|amr)'>
+ <params>
+ <param name='codec-support' doc='Codec Support settings' />
+ <param name='fr' doc='Fullrate' />
+ <param name='hr' doc='Half Rate' />
+ <param name='efr' doc='Enhanced Full Rate' />
+ <param name='amr' doc='Adaptive Multirate' />
+ <param name='hr' doc='Half Rate' />
+ <param name='efr' doc='Enhanced Full Rate' />
+ <param name='amr' doc='Adaptive Multirate' />
+ <param name='hr' doc='Half Rate' />
+ <param name='efr' doc='Enhanced Full Rate' />
+ <param name='amr' doc='Adaptive Multirate' />
+ <param name='hr' doc='Half Rate' />
+ <param name='efr' doc='Enhanced Full Rate' />
+ <param name='amr' doc='Adaptive Multirate' />
+ </params>
+ </command>
+ <command id='trx <0-255>'>
+ <params>
+ <param name='trx' doc='Radio Transceiver' />
+ <param name='<0-255>' doc='Select a TRX to configure' />
+ </params>
+ </command>
+ <command id='is-connection-list (add|del) <0-2047> <0-2047> <0-255>'>
+ <params>
+ <param name='is-connection-list' doc='Interface Switch Connnection List' />
+ <param name='add' doc='Add to IS list' />
+ <param name='del' doc='Delete from IS list' />
+ <param name='<0-2047>' doc='ICP1' />
+ <param name='<0-2047>' doc='ICP2' />
+ <param name='<0-255>' doc='Contiguity Index' />
+ </params>
+ </command>
+ </node>
+ <node id='16'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='arfcn <0-1023>'>
+ <params>
+ <param name='arfcn' doc='Set the ARFCN for this TRX' />
+ <param name='<0-1023>' doc='Absolute Radio Frequency Channel Number' />
+ </params>
+ </command>
+ <command id='description .TEXT'>
+ <params>
+ <param name='description' doc='Save human-readable decription of the object' />
+ <param name='.TEXT' doc='Text until the end of the line' />
+ </params>
+ </command>
+ <command id='no description'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='description' doc='Remove description of the object' />
+ </params>
+ </command>
+ <command id='nominal power <0-100>'>
+ <params>
+ <param name='nominal' doc='Nominal TRX RF Power in dBm' />
+ <param name='power' doc='Nominal TRX RF Power in dBm' />
+ <param name='<0-100>' doc='Nominal TRX RF Power in dBm' />
+ </params>
+ </command>
+ <command id='max_power_red <0-100>'>
+ <params>
+ <param name='max_power_red' doc='Reduction of maximum BS RF Power (relative to nominal power)' />
+ <param name='<0-100>' doc='Reduction of maximum BS RF Power in dB' />
+ </params>
+ </command>
+ <command id='rsl e1 line E1_LINE timeslot <1-31> sub-slot (0|1|2|3|full)'>
+ <params>
+ <param name='rsl' doc='RSL Parameters' />
+ <param name='e1' doc='E1/T1 interface to be used for RSL' />
+ <param name='line' doc='E1/T1 interface to be used for RSL' />
+ <param name='E1_LINE' doc='E1/T1 Line Number to be used for RSL' />
+ <param name='timeslot' doc='E1/T1 Timeslot to be used for RSL' />
+ <param name='<1-31>' doc='E1/T1 Timeslot to be used for RSL' />
+ <param name='sub-slot' doc='E1/T1 Sub-slot to be used for RSL' />
+ <param name='0' doc='E1/T1 Sub-slot 0 is to be used for RSL' />
+ <param name='1' doc='E1/T1 Sub-slot 1 is to be used for RSL' />
+ <param name='2' doc='E1/T1 Sub-slot 2 is to be used for RSL' />
+ <param name='3' doc='E1/T1 Sub-slot 3 is to be used for RSL' />
+ <param name='full' doc='E1/T1 full timeslot is to be used for RSL' />
+ </params>
+ </command>
+ <command id='rsl e1 tei <0-63>'>
+ <params>
+ <param name='rsl' doc='RSL Parameters' />
+ <param name='e1' doc='Set the TEI to be used for RSL' />
+ <param name='tei' doc='Set the TEI to be used for RSL' />
+ <param name='<0-63>' doc='TEI to be used for RSL' />
+ </params>
+ </command>
+ <command id='rf_locked (0|1)'>
+ <params>
+ <param name='rf_locked' doc='Set or unset the RF Locking (Turn off RF of the TRX)' />
+ <param name='0' doc='TRX is NOT RF locked (active)' />
+ <param name='1' doc='TRX is RF locked (turned off)' />
+ </params>
+ </command>
+ <command id='timeslot <0-7>'>
+ <params>
+ <param name='timeslot' doc='Select a Timeslot to configure' />
+ <param name='<0-7>' doc='Timeslot number' />
+ </params>
+ </command>
+ </node>
+ <node id='17'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='phys_chan_config (none|ccch|ccch+sdcch4|tch/f|tch/h|sdcch8|pdch|tch/f_pdch|unknown)'>
+ <params>
+ <param name='phys_chan_config' doc='Physical Channel Combination' />
+ <param name='none' doc='Physical Channel not configured' />
+ <param name='ccch' doc='FCCH + SCH + BCCH + CCCH (Comb. IV)' />
+ <param name='ccch+sdcch4' doc='FCCH + SCH + BCCH + CCCH + 4 SDCCH + 2 SACCH (Comb. V)' />
+ <param name='tch/f' doc='TCH/F + FACCH/F + SACCH (Comb. I)' />
+ <param name='tch/h' doc='2 TCH/H + 2 FACCH/H + 2 SACCH (Comb. II)' />
+ <param name='sdcch8' doc='8 SDCCH + 4 SACCH (Comb. VII)' />
+ <param name='pdch' doc='Packet Data Channel for GPRS/EDGE' />
+ <param name='tch/f_pdch' doc='Dynamic TCH/F or GPRS PDCH' />
+ <param name='unknown' doc='Unknown / Unsupported channel combination' />
+ </params>
+ </command>
+ <command id='phys_chan_config PCHAN'>
+ <params>
+ <param name='phys_chan_config' doc='Physical Channel configuration (TCH/SDCCH/...)' />
+ <param name='PCHAN' doc='Physical Channel' />
+ </params>
+ </command>
+ <command id='training_sequence_code <0-7>'>
+ <params>
+ <param name='training_sequence_code' doc='Training Sequence Code of the Timeslot' />
+ <param name='<0-7>' doc='TSC' />
+ </params>
+ </command>
+ <command id='hopping enabled (0|1)'>
+ <params>
+ <param name='hopping' doc='Configure frequency hopping' />
+ <param name='enabled' doc='Enable or disable frequency hopping' />
+ <param name='0' doc='Disable frequency hopping' />
+ <param name='1' doc='Enable frequency hopping' />
+ </params>
+ </command>
+ <command id='hopping sequence-number <0-63>'>
+ <params>
+ <param name='hopping' doc='Configure frequency hopping' />
+ <param name='sequence-number' doc='Which hopping sequence to use for this channel' />
+ <param name='<0-63>' doc='Hopping Sequence Number (HSN)' />
+ </params>
+ </command>
+ <command id='hopping maio <0-63>'>
+ <params>
+ <param name='hopping' doc='Configure frequency hopping' />
+ <param name='maio' doc='Which hopping MAIO to use for this channel' />
+ <param name='<0-63>' doc='Mobile Allocation Index Offset (MAIO)' />
+ </params>
+ </command>
+ <command id='hopping arfcn add <0-1023>'>
+ <params>
+ <param name='hopping' doc='Configure frequency hopping' />
+ <param name='arfcn' doc='Configure hopping ARFCN list' />
+ <param name='add' doc='Add an entry to the hopping ARFCN list' />
+ <param name='<0-1023>' doc='ARFCN' />
+ </params>
+ </command>
+ <command id='hopping arfcn del <0-1023>'>
+ <params>
+ <param name='hopping' doc='Configure frequency hopping' />
+ <param name='arfcn' doc='Configure hopping ARFCN list' />
+ <param name='del' doc='Delete an entry to the hopping ARFCN list' />
+ <param name='<0-1023>' doc='ARFCN' />
+ </params>
+ </command>
+ <command id='e1 line E1_LINE timeslot <1-31> sub-slot (0|1|2|3|full)'>
+ <params>
+ <param name='e1' doc='E1/T1 channel connected to this on-air timeslot' />
+ <param name='line' doc='E1/T1 channel connected to this on-air timeslot' />
+ <param name='E1_LINE' doc='E1/T1 line connected to this on-air timeslot' />
+ <param name='timeslot' doc='E1/T1 timeslot connected to this on-air timeslot' />
+ <param name='<1-31>' doc='E1/T1 timeslot connected to this on-air timeslot' />
+ <param name='sub-slot' doc='E1/T1 sub-slot connected to this on-air timeslot' />
+ <param name='0' doc='E1/T1 sub-slot 0 connected to this on-air timeslot' />
+ <param name='1' doc='E1/T1 sub-slot 1 connected to this on-air timeslot' />
+ <param name='2' doc='E1/T1 sub-slot 2 connected to this on-air timeslot' />
+ <param name='3' doc='E1/T1 sub-slot 3 connected to this on-air timeslot' />
+ <param name='full' doc='Full E1/T1 timeslot connected to this on-air timeslot' />
+ </params>
+ </command>
+ </node>
+ <node id='22'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='change-adm-state (locked|unlocked|shutdown|null)'>
+ <params>
+ <param name='change-adm-state' doc='Change the Administrative State' />
+ <param name='locked' doc='Locked' />
+ <param name='unlocked' doc='Unlocked' />
+ <param name='shutdown' doc='Shutdown' />
+ <param name='null' doc='NULL' />
+ </params>
+ </command>
+ <command id='opstart'>
+ <params>
+ <param name='opstart' doc='Send an OPSTART message to the object' />
+ </params>
+ </command>
+ </node>
+ <node id='25'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='token TOKEN'>
+ <params>
+ <param name='token' doc='A token for the BSC to be sent to the MSC' />
+ <param name='TOKEN' doc='A token' />
+ </params>
+ </command>
+ <command id='core-mobile-network-code <1-999>'>
+ <params>
+ <param name='core-mobile-network-code' doc='Use this network code for the backbone' />
+ <param name='<1-999>' doc='NCC value' />
+ </params>
+ </command>
+ <command id='core-mobile-country-code <1-999>'>
+ <params>
+ <param name='core-mobile-country-code' doc='Use this country code for the backbone' />
+ <param name='<1-999>' doc='MCC value' />
+ </params>
+ </command>
+ <command id='ip.access rtp-base <1-65000>'>
+ <params>
+ <param name='ip.access' doc='IP.ACCESS specific' />
+ <param name='rtp-base' doc='Set the rtp-base port for the RTP stream' />
+ <param name='<1-65000>' doc='Port number' />
+ </params>
+ </command>
+ <command id='codec-list .LIST'>
+ <params>
+ <param name='codec-list' doc='Set the allowed audio codecs' />
+ <param name='.LIST' doc='List of audio codecs' />
+ </params>
+ </command>
+ <command id='dest A.B.C.D <1-65000> <0-255>'>
+ <params>
+ <param name='dest' doc='Add a destination to a MUX/MSC' />
+ <param name='A.B.C.D' doc='IP Address' />
+ <param name='<1-65000>' doc='Port' />
+ <param name='<0-255>' doc='DSCP' />
+ </params>
+ </command>
+ <command id='no dest A.B.C.D <1-65000> <0-255>'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='dest' doc='Remove a destination to a MUX/MSC' />
+ <param name='A.B.C.D' doc='IP Address' />
+ <param name='<1-65000>' doc='Port' />
+ <param name='<0-255>' doc='DSCP' />
+ </params>
+ </command>
+ <command id='timeout-ping NR'>
+ <params>
+ <param name='timeout-ping' doc='Set the PING interval, negative for not sending PING' />
+ <param name='NR' doc='Timeout in seconds' />
+ </params>
+ </command>
+ <command id='timeout-pong NR'>
+ <params>
+ <param name='timeout-pong' doc='Set the time to wait for a PONG' />
+ <param name='NR' doc='Timeout in seconds' />
+ </params>
+ </command>
+ <command id='bsc-welcome-text .TEXT'>
+ <params>
+ <param name='bsc-welcome-text' doc='Set the USSD notification to be sent' />
+ <param name='.TEXT' doc='Text to be sent' />
+ </params>
+ </command>
+ <command id='no bsc-welcome-text'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='bsc-welcome-text' doc='Clear the USSD notification to be sent' />
+ </params>
+ </command>
+ <command id='bsc-msc-lost-text .TEXT'>
+ <params>
+ <param name='bsc-msc-lost-text' doc='Set the USSD notification to be sent on MSC connection loss' />
+ <param name='.TEXT' doc='Text to be sent' />
+ </params>
+ </command>
+ <command id='no bsc-msc-lost-text'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='bsc-msc-lost-text' doc='Clear the USSD notification to be sent on MSC connection loss' />
+ </params>
+ </command>
+ <command id='bsc-grace-text .TEXT'>
+ <params>
+ <param name='bsc-grace-text' doc='Set the USSD notification to be sent when the MSC has entered the grace period' />
+ <param name='.TEXT' doc='Text to be sent' />
+ </params>
+ </command>
+ <command id='no bsc-grace-text'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='bsc-grace-text' doc='Clear the USSD notification to be sent when the MSC has entered the grace period' />
+ </params>
+ </command>
+ <command id='type (normal|local)'>
+ <params>
+ <param name='type' doc='Select the MSC type' />
+ <param name='normal' doc='Plain GSM MSC' />
+ <param name='local' doc='Special MSC for local call routing' />
+ </params>
+ </command>
+ <command id='allow-emergency (allow|deny)'>
+ <params>
+ <param name='allow-emergency' doc='Allow CM ServiceRequests with type emergency' />
+ <param name='allow' doc='Allow' />
+ <param name='deny' doc='Deny' />
+ </params>
+ </command>
+ <command id='local-prefix REGEXP'>
+ <params>
+ <param name='local-prefix' doc='Prefix for local numbers' />
+ <param name='REGEXP' doc='REGEXP used' />
+ </params>
+ </command>
+ <command id='amr-config 12_2k (allowed|forbidden)'>
+ <params>
+ <param name='amr-config' doc='AMR Multirate Configuration' />
+ <param name='12_2k' doc='Bitrate' />
+ <param name='allowed' doc='Allowed' />
+ <param name='forbidden' doc='Forbidden' />
+ </params>
+ </command>
+ <command id='amr-config 10_2k (allowed|forbidden)'>
+ <params>
+ <param name='amr-config' doc='AMR Multirate Configuration' />
+ <param name='10_2k' doc='Bitrate' />
+ <param name='allowed' doc='Allowed' />
+ <param name='forbidden' doc='Forbidden' />
+ </params>
+ </command>
+ <command id='amr-config 7_95k (allowed|forbidden)'>
+ <params>
+ <param name='amr-config' doc='AMR Multirate Configuration' />
+ <param name='7_95k' doc='Bitrate' />
+ <param name='allowed' doc='Allowed' />
+ <param name='forbidden' doc='Forbidden' />
+ </params>
+ </command>
+ <command id='amr-config 7_40k (allowed|forbidden)'>
+ <params>
+ <param name='amr-config' doc='AMR Multirate Configuration' />
+ <param name='7_40k' doc='Bitrate' />
+ <param name='allowed' doc='Allowed' />
+ <param name='forbidden' doc='Forbidden' />
+ </params>
+ </command>
+ <command id='amr-config 6_70k (allowed|forbidden)'>
+ <params>
+ <param name='amr-config' doc='AMR Multirate Configuration' />
+ <param name='6_70k' doc='Bitrate' />
+ <param name='allowed' doc='Allowed' />
+ <param name='forbidden' doc='Forbidden' />
+ </params>
+ </command>
+ <command id='amr-config 5_90k (allowed|forbidden)'>
+ <params>
+ <param name='amr-config' doc='AMR Multirate Configuration' />
+ <param name='5_90k' doc='Bitrate' />
+ <param name='allowed' doc='Allowed' />
+ <param name='forbidden' doc='Forbidden' />
+ </params>
+ </command>
+ <command id='amr-config 5_15k (allowed|forbidden)'>
+ <params>
+ <param name='amr-config' doc='AMR Multirate Configuration' />
+ <param name='5_15k' doc='Bitrate' />
+ <param name='allowed' doc='Allowed' />
+ <param name='forbidden' doc='Forbidden' />
+ </params>
+ </command>
+ <command id='amr-config 4_75k (allowed|forbidden)'>
+ <params>
+ <param name='amr-config' doc='AMR Multirate Configuration' />
+ <param name='4_75k' doc='Bitrate' />
+ <param name='allowed' doc='Allowed' />
+ <param name='forbidden' doc='Forbidden' />
+ </params>
+ </command>
+ </node>
+ <node id='26'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='reset-command'>
+ <params>
+ <param name='reset-command' doc='Reset the MO' />
+ </params>
+ </command>
+ <command id='start-request'>
+ <params>
+ <param name='start-request' doc='Start the MO' />
+ </params>
+ </command>
+ <command id='status-request'>
+ <params>
+ <param name='status-request' doc='Get the MO Status' />
+ </params>
+ </command>
+ <command id='connect-command'>
+ <params>
+ <param name='connect-command' doc='Connect the MO' />
+ </params>
+ </command>
+ <command id='disconnect-command'>
+ <params>
+ <param name='disconnect-command' doc='Disconnect the MO' />
+ </params>
+ </command>
+ <command id='enable-request'>
+ <params>
+ <param name='enable-request' doc='Enable the MO' />
+ </params>
+ </command>
+ <command id='disable-request'>
+ <params>
+ <param name='disable-request' doc='Disable the MO' />
+ </params>
+ </command>
+ <command id='operational-info <0-1>'>
+ <params>
+ <param name='operational-info' doc='Set operational information' />
+ <param name='<0-1>' doc='Set operational info to 0 or 1' />
+ </params>
+ </command>
+ <command id='test-request'>
+ <params>
+ <param name='test-request' doc='Test the MO' />
+ </params>
+ </command>
+ <command id='configuration-request'>
+ <params>
+ <param name='configuration-request' doc='Send the configuration request for current MO' />
+ </params>
+ </command>
+ <command id='con-connection-list (add|del) <1-255> <0-1023> deconcentrated'>
+ <params>
+ <param name='con-connection-list' doc='CON connetiton list' />
+ <param name='add' doc='Add entry to CON list' />
+ <param name='del' doc='Delete entry from CON list' />
+ <param name='<1-255>' doc='Connection Group Number' />
+ <param name='<0-1023>' doc='CON Connection Point' />
+ <param name='deconcentrated' doc='De-concentrated in/outlet' />
+ </params>
+ </command>
+ <command id='con-connection-list (add|del) <1-255> <0-1023> tei <0-63>'>
+ <params>
+ <param name='con-connection-list' doc='CON connetiton list' />
+ <param name='add' doc='Add entry to CON list' />
+ <param name='del' doc='Delete entry from CON list' />
+ <param name='<1-255>' doc='Connection Group Number' />
+ <param name='<0-1023>' doc='CON Connection Point' />
+ <param name='tei' doc='Concentrated in/outlet with TEI' />
+ <param name='<0-63>' doc='TEI Number' />
+ </params>
+ </command>
+ </node>
+ <node id='30'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='mid-call-text .TEXT'>
+ <params>
+ <param name='mid-call-text' doc='Set the USSD notifcation to be send.' />
+ <param name='.TEXT' doc='Text to be sent' />
+ </params>
+ </command>
+ <command id='mid-call-timeout NR'>
+ <params>
+ <param name='mid-call-timeout' doc='Switch from Grace to Off in NR seconds.' />
+ <param name='NR' doc='Timeout in seconds' />
+ </params>
+ </command>
+ <command id='bsc-rf-socket PATH'>
+ <params>
+ <param name='bsc-rf-socket' doc='Set the filename for the RF control interface.' />
+ <param name='PATH' doc='RF Control path' />
+ </params>
+ </command>
+ <command id='bsc-auto-rf-off <1-65000>'>
+ <params>
+ <param name='bsc-auto-rf-off' doc='Disable RF on MSC Connection' />
+ <param name='<1-65000>' doc='Timeout' />
+ </params>
+ </command>
+ <command id='no bsc-auto-rf-off'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='bsc-auto-rf-off' doc='Disable RF on MSC Connection' />
+ </params>
+ </command>
+ <command id='missing-msc-text .TEXT'>
+ <params>
+ <param name='missing-msc-text' doc='Set the USSD notification to be send when a MSC has not been found.' />
+ <param name='.TEXT' doc='Text to be sent' />
+ </params>
+ </command>
+ <command id='no missing-msc-text'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='missing-msc-text' doc='Clear the USSD notification to be send when a MSC has not been found.' />
+ </params>
+ </command>
+ </node>
+</vtydoc>
\ No newline at end of file |