diff options
-rw-r--r-- | doc/manuals/vty/bsc_vty_reference.xml | 174 |
1 files changed, 140 insertions, 34 deletions
diff --git a/doc/manuals/vty/bsc_vty_reference.xml b/doc/manuals/vty/bsc_vty_reference.xml index 6a3e4fb57..178e5b573 100644 --- a/doc/manuals/vty/bsc_vty_reference.xml +++ b/doc/manuals/vty/bsc_vty_reference.xml @@ -402,6 +402,56 @@ <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> </params> </command> + <command id='logp (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|cbs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'> + <params> + <param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' /> + <param name='rll' doc='A-bis Radio Link Layer (RLL)' /> + <param name='mm' doc='Layer3 Mobility Management (MM)' /> + <param name='rr' doc='Layer3 Radio Resource (RR)' /> + <param name='rsl' doc='A-bis Radio Signalling Link (RSL)' /> + <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> + <param name='pag' doc='Paging Subsystem' /> + <param name='meas' doc='Radio Measurement Processing' /> + <param name='msc' doc='Mobile Switching Center' /> + <param name='ho' doc='Hand-Over Process' /> + <param name='hodec' doc='Hand-Over Decision' /> + <param name='ref' doc='Reference Counting' /> + <param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> + <param name='ctrl' doc='Control interface' /> + <param name='filter' doc='BSC/NAT IMSI based filtering' /> + <param name='pcu' doc='PCU Interface' /> + <param name='lcls' doc='Local Call, Local Switch' /> + <param name='chan' doc='lchan FSM' /> + <param name='ts' doc='timeslot FSM' /> + <param name='as' doc='assignment FSM' /> + <param name='cbs' doc='Cell Broadcast System' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> + <param name='lrspro' doc='Remote SIM protocol' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + <param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' /> + </params> + </command> <command id='show logging vty'> <params> <param name='show' doc='Show running system information' /> @@ -1070,6 +1120,56 @@ <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> </params> </command> + <command id='logp (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|cbs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'> + <params> + <param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' /> + <param name='rll' doc='A-bis Radio Link Layer (RLL)' /> + <param name='mm' doc='Layer3 Mobility Management (MM)' /> + <param name='rr' doc='Layer3 Radio Resource (RR)' /> + <param name='rsl' doc='A-bis Radio Signalling Link (RSL)' /> + <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> + <param name='pag' doc='Paging Subsystem' /> + <param name='meas' doc='Radio Measurement Processing' /> + <param name='msc' doc='Mobile Switching Center' /> + <param name='ho' doc='Hand-Over Process' /> + <param name='hodec' doc='Hand-Over Decision' /> + <param name='ref' doc='Reference Counting' /> + <param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> + <param name='ctrl' doc='Control interface' /> + <param name='filter' doc='BSC/NAT IMSI based filtering' /> + <param name='pcu' doc='PCU Interface' /> + <param name='lcls' doc='Local Call, Local Switch' /> + <param name='chan' doc='lchan FSM' /> + <param name='ts' doc='timeslot FSM' /> + <param name='as' doc='assignment FSM' /> + <param name='cbs' doc='Cell Broadcast System' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> + <param name='lrspro' doc='Remote SIM protocol' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + <param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' /> + </params> + </command> <command id='show logging vty'> <params> <param name='show' doc='Show running system information' /> @@ -2602,7 +2702,7 @@ <param name='handover1' doc='Handover options for handover decision algorithm 1' /> <param name='window' doc='Measurement averaging settings' /> <param name='rxlev' doc='Received-Level averaging' /> - <param name='averaging' doc='How many RxLev measurements are used for averaging' /> + <param name='averaging' doc='How many RxLev measurements to use for averaging' /> <param name='<1-10>' doc='RxLev averaging: Number of values to average over' /> <param name='default' doc='Use default (10), remove explicit setting on this node' /> </params> @@ -2612,7 +2712,7 @@ <param name='handover1' doc='Handover options for handover decision algorithm 1' /> <param name='window' doc='Measurement averaging settings' /> <param name='rxqual' doc='Received-Quality averaging' /> - <param name='averaging' doc='How many RxQual measurements are used for averaging' /> + <param name='averaging' doc='How many RxQual measurements to use for averaging' /> <param name='<1-10>' doc='RxQual averaging: Number of values to average over' /> <param name='default' doc='Use default (1), remove explicit setting on this node' /> </params> @@ -2622,8 +2722,8 @@ <param name='handover1' doc='Handover options for handover decision algorithm 1' /> <param name='window' doc='Measurement averaging settings' /> <param name='rxlev' doc='Received-Level averaging' /> - <param name='neighbor' doc='How many Neighbor RxLev measurements are used for averaging' /> - <param name='averaging' doc='How many Neighbor RxLev measurements are used for averaging' /> + <param name='neighbor' doc='How many Neighbor RxLev measurements to use for averaging' /> + <param name='averaging' doc='How many Neighbor RxLev measurements to use for averaging' /> <param name='<1-10>' doc='Neighbor RxLev averaging: Number of values to average over' /> <param name='default' doc='Use default (10), remove explicit setting on this node' /> </params> @@ -2662,7 +2762,7 @@ <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='window' doc='Measurement averaging settings' /> <param name='rxlev' doc='Received-Level averaging' /> - <param name='averaging' doc='How many RxLev measurements are used for averaging' /> + <param name='averaging' doc='How many RxLev measurements to use for averaging' /> <param name='<1-10>' doc='RxLev averaging: Number of values to average over' /> <param name='default' doc='Use default (10), remove explicit setting on this node' /> </params> @@ -2672,7 +2772,7 @@ <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='window' doc='Measurement averaging settings' /> <param name='rxqual' doc='Received-Quality averaging' /> - <param name='averaging' doc='How many RxQual measurements are used for averaging' /> + <param name='averaging' doc='How many RxQual measurements to use for averaging' /> <param name='<1-10>' doc='RxQual averaging: Number of values to average over' /> <param name='default' doc='Use default (1), remove explicit setting on this node' /> </params> @@ -2682,8 +2782,8 @@ <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='window' doc='Measurement averaging settings' /> <param name='rxlev' doc='Received-Level averaging' /> - <param name='neighbor' doc='How many Neighbor RxLev measurements are used for averaging' /> - <param name='averaging' doc='How many Neighbor RxLev measurements are used for averaging' /> + <param name='neighbor' doc='How many Neighbor RxLev measurements to use for averaging' /> + <param name='averaging' doc='How many Neighbor RxLev measurements to use for averaging' /> <param name='<1-10>' doc='Neighbor RxLev averaging: Number of values to average over' /> <param name='default' doc='Use default (10), remove explicit setting on this node' /> </params> @@ -2720,7 +2820,7 @@ <command id='handover2 assignment (0|1|default)'> <params> <param name='handover2' doc='Handover options for handover decision algorithm 2' /> - <param name='assignment' doc='Enable or disable in-call channel re-assignment' /> + <param name='assignment' doc='Enable or disable in-call channel re-assignment within the same cell' /> <param name='0' doc='Disable in-call assignment' /> <param name='1' doc='Enable in-call assignment' /> <param name='default' doc='Use default (0), remove explicit setting on this node' /> @@ -2740,7 +2840,7 @@ <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='min' doc='Minimum Level/Quality thresholds before triggering HO' /> <param name='rxlev' doc='How weak may RxLev of an MS become before triggering HO' /> - <param name='<-110--50>' doc='minimum RxLev (dBm)' /> + <param name='<-110--50>' doc='minimum RxLev (dBm; note: negative values)' /> <param name='default' doc='Use default (-100), remove explicit setting on this node' /> </params> </command> @@ -2801,7 +2901,7 @@ <params> <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /> - <param name='max-distance' doc='Time to suspend handovers after leaving this cell due to exceeding max distance' /> + <param name='max-distance' doc='Time to suspend handover for a subscriber after leaving this cell due to exceeding max distance; see also 'handover2 retries'' /> <param name='<0-99999>' doc='Seconds' /> <param name='default' doc='Use default (300), remove explicit setting on this node' /> </params> @@ -2810,7 +2910,7 @@ <params> <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /> - <param name='failed-ho' doc='Time to suspend handovers after handover failure to this cell' /> + <param name='failed-ho' doc='Time to suspend handover for a subscriber after a failed handover into this cell; see also 'handover2 retries'' /> <param name='<0-99999>' doc='Seconds' /> <param name='default' doc='Use default (60), remove explicit setting on this node' /> </params> @@ -2819,7 +2919,7 @@ <params> <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /> - <param name='failed-assignment' doc='Time to suspend handovers after assignment failure in this cell' /> + <param name='failed-assignment' doc='Time to suspend handover for a subscriber after a failed re-assignment within this cell; see also 'handover2 retries'' /> <param name='<0-99999>' doc='Seconds' /> <param name='default' doc='Use default (60), remove explicit setting on this node' /> </params> @@ -2827,7 +2927,7 @@ <command id='handover2 retries (<0-9>|default)'> <params> <param name='handover2' doc='Handover options for handover decision algorithm 2' /> - <param name='retries' doc='Immediately retry on handover/assignment failure' /> + <param name='retries' doc='Number of times to immediately retry a failed handover/assignment, before a penalty time is applied' /> <param name='<0-9>' doc='Number of retries' /> <param name='default' doc='Use default (0), remove explicit setting on this node' /> </params> @@ -2836,7 +2936,7 @@ <params> <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='congestion-check' doc='Configure congestion check interval' /> - <param name='disabled' doc='Disable congestion checking, do not handover based on cell overload' /> + <param name='disabled' doc='Disable congestion checking, do not handover based on cell load. Note: there is one global congestion check interval, i.e. contrary to other handover2 settings, this is not configurable per individual cell.' /> <param name='<1-999>' doc='Congestion check interval in seconds (default 10)' /> <param name='now' doc='Manually trigger a congestion check to run right now' /> </params> @@ -2920,15 +3020,15 @@ </command> <command id='ipa unit-id <0-65534> <0-255>'> <params> - <param name='ip.access' doc='Abis/IP specific options' /> - <param name='unit_id' doc='Set the IPA BTS Unit ID' /> + <param name='ipa' doc='Abis/IP specific options' /> + <param name='unit-id' doc='Set the IPA BTS Unit ID' /> <param name='<0-65534>' doc='Unit ID (Site)' /> <param name='<0-255>' doc='Unit ID (BTS)' /> </params> </command> <command id='ipa rsl-ip A.B.C.D'> <params> - <param name='ip.access' doc='Abis/IP specific options' /> + <param name='ipa' doc='Abis/IP specific options' /> <param name='rsl-ip' doc='Set the IPA RSL IP Address of the BSC' /> <param name='A.B.C.D' doc='Destination IP address for RSL connection' /> </params> @@ -2959,8 +3059,8 @@ <command id='oml ipa stream-id <0-255> line E1_LINE'> <params> <param name='oml' doc='Organization & Maintenance Link' /> - <param name='ip.access' doc='A-bis/IP Specific Options' /> - <param name='stream_id' doc='Set the ip.access Stream ID of the OML link of this BTS' /> + <param name='ipa' doc='A-bis/IP Specific Options' /> + <param name='stream-id' doc='Set the ipa Stream ID of the OML link of this BTS' /> <param name='<0-255>' doc='Stream Identifier' /> <param name='line' doc='Virtual E1 Line Number' /> <param name='E1_LINE' doc='Virtual E1 Line Number' /> @@ -4072,6 +4172,12 @@ <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /> </params> </command> + <command id='no neighbors'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='neighbors' doc='Remove all local and remote-BSS neighbor config for this cell. Note that this falls back to the legacy behavior of regarding all local cells as neighbors.' /> + </params> + </command> <command id='trx <0-255>'> <params> <param name='trx' doc='Radio Transceiver' /> @@ -4129,7 +4235,7 @@ <param name='handover1' doc='Handover options for handover decision algorithm 1' /> <param name='window' doc='Measurement averaging settings' /> <param name='rxlev' doc='Received-Level averaging' /> - <param name='averaging' doc='How many RxLev measurements are used for averaging' /> + <param name='averaging' doc='How many RxLev measurements to use for averaging' /> <param name='<1-10>' doc='RxLev averaging: Number of values to average over' /> <param name='default' doc='Use default (10), remove explicit setting on this node' /> </params> @@ -4139,7 +4245,7 @@ <param name='handover1' doc='Handover options for handover decision algorithm 1' /> <param name='window' doc='Measurement averaging settings' /> <param name='rxqual' doc='Received-Quality averaging' /> - <param name='averaging' doc='How many RxQual measurements are used for averaging' /> + <param name='averaging' doc='How many RxQual measurements to use for averaging' /> <param name='<1-10>' doc='RxQual averaging: Number of values to average over' /> <param name='default' doc='Use default (1), remove explicit setting on this node' /> </params> @@ -4149,8 +4255,8 @@ <param name='handover1' doc='Handover options for handover decision algorithm 1' /> <param name='window' doc='Measurement averaging settings' /> <param name='rxlev' doc='Received-Level averaging' /> - <param name='neighbor' doc='How many Neighbor RxLev measurements are used for averaging' /> - <param name='averaging' doc='How many Neighbor RxLev measurements are used for averaging' /> + <param name='neighbor' doc='How many Neighbor RxLev measurements to use for averaging' /> + <param name='averaging' doc='How many Neighbor RxLev measurements to use for averaging' /> <param name='<1-10>' doc='Neighbor RxLev averaging: Number of values to average over' /> <param name='default' doc='Use default (10), remove explicit setting on this node' /> </params> @@ -4189,7 +4295,7 @@ <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='window' doc='Measurement averaging settings' /> <param name='rxlev' doc='Received-Level averaging' /> - <param name='averaging' doc='How many RxLev measurements are used for averaging' /> + <param name='averaging' doc='How many RxLev measurements to use for averaging' /> <param name='<1-10>' doc='RxLev averaging: Number of values to average over' /> <param name='default' doc='Use default (10), remove explicit setting on this node' /> </params> @@ -4199,7 +4305,7 @@ <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='window' doc='Measurement averaging settings' /> <param name='rxqual' doc='Received-Quality averaging' /> - <param name='averaging' doc='How many RxQual measurements are used for averaging' /> + <param name='averaging' doc='How many RxQual measurements to use for averaging' /> <param name='<1-10>' doc='RxQual averaging: Number of values to average over' /> <param name='default' doc='Use default (1), remove explicit setting on this node' /> </params> @@ -4209,8 +4315,8 @@ <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='window' doc='Measurement averaging settings' /> <param name='rxlev' doc='Received-Level averaging' /> - <param name='neighbor' doc='How many Neighbor RxLev measurements are used for averaging' /> - <param name='averaging' doc='How many Neighbor RxLev measurements are used for averaging' /> + <param name='neighbor' doc='How many Neighbor RxLev measurements to use for averaging' /> + <param name='averaging' doc='How many Neighbor RxLev measurements to use for averaging' /> <param name='<1-10>' doc='Neighbor RxLev averaging: Number of values to average over' /> <param name='default' doc='Use default (10), remove explicit setting on this node' /> </params> @@ -4247,7 +4353,7 @@ <command id='handover2 assignment (0|1|default)'> <params> <param name='handover2' doc='Handover options for handover decision algorithm 2' /> - <param name='assignment' doc='Enable or disable in-call channel re-assignment' /> + <param name='assignment' doc='Enable or disable in-call channel re-assignment within the same cell' /> <param name='0' doc='Disable in-call assignment' /> <param name='1' doc='Enable in-call assignment' /> <param name='default' doc='Use default (0), remove explicit setting on this node' /> @@ -4267,7 +4373,7 @@ <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='min' doc='Minimum Level/Quality thresholds before triggering HO' /> <param name='rxlev' doc='How weak may RxLev of an MS become before triggering HO' /> - <param name='<-110--50>' doc='minimum RxLev (dBm)' /> + <param name='<-110--50>' doc='minimum RxLev (dBm; note: negative values)' /> <param name='default' doc='Use default (-100), remove explicit setting on this node' /> </params> </command> @@ -4328,7 +4434,7 @@ <params> <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /> - <param name='max-distance' doc='Time to suspend handovers after leaving this cell due to exceeding max distance' /> + <param name='max-distance' doc='Time to suspend handover for a subscriber after leaving this cell due to exceeding max distance; see also 'handover2 retries'' /> <param name='<0-99999>' doc='Seconds' /> <param name='default' doc='Use default (300), remove explicit setting on this node' /> </params> @@ -4337,7 +4443,7 @@ <params> <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /> - <param name='failed-ho' doc='Time to suspend handovers after handover failure to this cell' /> + <param name='failed-ho' doc='Time to suspend handover for a subscriber after a failed handover into this cell; see also 'handover2 retries'' /> <param name='<0-99999>' doc='Seconds' /> <param name='default' doc='Use default (60), remove explicit setting on this node' /> </params> @@ -4346,7 +4452,7 @@ <params> <param name='handover2' doc='Handover options for handover decision algorithm 2' /> <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /> - <param name='failed-assignment' doc='Time to suspend handovers after assignment failure in this cell' /> + <param name='failed-assignment' doc='Time to suspend handover for a subscriber after a failed re-assignment within this cell; see also 'handover2 retries'' /> <param name='<0-99999>' doc='Seconds' /> <param name='default' doc='Use default (60), remove explicit setting on this node' /> </params> @@ -4354,7 +4460,7 @@ <command id='handover2 retries (<0-9>|default)'> <params> <param name='handover2' doc='Handover options for handover decision algorithm 2' /> - <param name='retries' doc='Immediately retry on handover/assignment failure' /> + <param name='retries' doc='Number of times to immediately retry a failed handover/assignment, before a penalty time is applied' /> <param name='<0-9>' doc='Number of retries' /> <param name='default' doc='Use default (0), remove explicit setting on this node' /> </params> |