diff options
| author | Philipp Maier <pmaier@sysmocom.de> | 2021-10-27 10:57:41 +0200 |
|---|---|---|
| committer | laforge <laforge@osmocom.org> | 2021-11-03 17:25:28 +0000 |
| commit | 085a92584fa95da2694052237f6c43a6909dc397 (patch) | |
| tree | f7884ed6d830461d21b0785b2bd8ab266210b6f4 /doc | |
| parent | 554e16978465dbad5002ffb4724b42d408ae7927 (diff) | |
heighbor_ident: add/del neighbor cells via ctrl interface
The VTY allows flexible control over the neighbor cell information via
the neighbor command, which can be found in the configure terminal under
the bts node. Lets add pendant of this command on the control interface
as well.
Change-Id: I343a40e18fa9b91e6c381912c0426a002841e079
Related: SYS#5641
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/manuals/chapters/control.adoc | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/doc/manuals/chapters/control.adoc b/doc/manuals/chapters/control.adoc index c2d7a8299..091cdc632 100644 --- a/doc/manuals/chapters/control.adoc +++ b/doc/manuals/chapters/control.adoc @@ -120,4 +120,29 @@ RF Ctrl is enabled in the BSC Configuration. Set/Get the value of maximum power reduction. Even values between 0 and 22 are accepted. +=== add/del neighbor cell + +The control interface allows for editing the neighbor cell configuration. Neighbor +cells can be added or removed during runtime. It is also possible to clear the +entire neighbor list if necessary. + +.Variables available over control interface +[options="header",width="100%",cols="20%,5%,5%,50%,20%"] +|=== +|Name|Access|Trap|Value|Comment +|bts.N.neighbor-bts.add|WO|No|"<num>"|Add neighbor cell by local BTS number. +|bts.N.neighbor-bts.del|WO|No|"<num>"|Delete neighbor cell by local BTS number. +|bts.N.neighbor-lac.add|WO|No|"<lac>[-<arfcn>-<bsic>]"|Add neighbor cell by LAC. +|bts.N.neighbor-lac.del|WO|No|"<lac>[-<arfcn>-<bsic>]"|Delete neighbor cell by LAC. +|bts.N.neighbor-lac-ci.add|WO|No|"<lac>-<ci>[-<arfcn>-<bsic>]"|Add neighbor cell by LAC and CI. +|bts.N.neighbor-lac-ci.del|WO|No|"<lac>-<ci>[-<arfcn>-<bsic>]"|Delete neighbor cell by LAC and CI. +|bts.N.neighbor-cgi.add|WO|No|"<mcc>-<mnc>-<lac>-<ci>[-<arfcn>-<bsic>]"|Add neighbor cell by cgi. +|bts.N.neighbor-cgi.del|WO|No|"<mcc>-<mnc>-<lac>-<ci>[-<arfcn>-<bsic>]"|Delete neighbor cell by cgi. +|bts.N.neighbor-cgi-ps.add|WO|No|"<mcc>-<mnc>-<lac>-<rac>-<ci>[-<arfcn>-<bsic>]"|Add neighbor cell by cgi (Packet Switched, with RAC) +|bts.N.neighbor-cgi-ps.del|WO|No|"<mcc>-<mnc>-<lac>-<rac>-<ci>[-<arfcn>-<bsic>]"|Delete neighbor cell by cgi (Packet Switched, with RAC). +|bts.N.neighbor-clear|WO|No|Ignored|Delete all neighbor cells. +|=== + +NOTE: The bsic-number (<bsic>) can also be set to "any" if no explcit bsic shall be given + FIXME: add variables defined in src/ctrl/control_if.c? |