diff options
author | Vadim Yanitskiy <vyanitskiy@sysmocom.de> | 2020-12-24 14:52:03 +0100 |
---|---|---|
committer | laforge <laforge@osmocom.org> | 2021-01-12 08:27:52 +0000 |
commit | 0a2541c3c30bed97ce6bd269e540b6fc7c6a1ddf (patch) | |
tree | 22f44c9647e7959db9f71098b6313e7f062c2765 /doc/manuals/chapters/power_control.adoc | |
parent | c52a1b7d80d862bec115cf245e8e9109f7548c5e (diff) |
power_control: add increase / reduce step size recommendations
Change-Id: I82e762c0c2b5e0dd739850ee494ab0a798e353de
Related: SYS#4918
Diffstat (limited to 'doc/manuals/chapters/power_control.adoc')
-rw-r--r-- | doc/manuals/chapters/power_control.adoc | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/doc/manuals/chapters/power_control.adoc b/doc/manuals/chapters/power_control.adoc index 0cf7d89a0..5de2b9ca6 100644 --- a/doc/manuals/chapters/power_control.adoc +++ b/doc/manuals/chapters/power_control.adoc @@ -201,6 +201,11 @@ in the tolerance window. In the example above, RxQual=3 would not trigger the control loop to increase BS power, as well as RxLev=38 (-72 dBm) would not trigger power reduction. +TIP: It's recommended to harmonize the increase step size with the RxLev threshold +window in a way that the former is less or equal than/to the later. For example, +if the RxLev threshold is 32 .. 36 (-78 .. -74 dBm), then the window size is 4 dB, +and thus the increase step should be less or equal (e.g. 2 or 4 dB). + In 3GPP TS 45.008, lower and upper RxLev thresholds are referred as `L_RXLEV_XX_P` and `U_RXLEV_XX_P`, while the RxQual thresholds are referred as `L_RXQUAL_XX_P` and `U_RXQUAL_XX_P`, where the `XX` is either `DL` (Downlink) or `UL` (Uplink). |