diff options
Diffstat (limited to 'include/instance/sercom4.h')
| -rw-r--r-- | include/instance/sercom4.h | 181 |
1 files changed, 181 insertions, 0 deletions
diff --git a/include/instance/sercom4.h b/include/instance/sercom4.h new file mode 100644 index 0000000..8806404 --- /dev/null +++ b/include/instance/sercom4.h @@ -0,0 +1,181 @@ +/** + * \file + * + * \brief Instance description for SERCOM4 + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + +#ifndef _SAME54_SERCOM4_INSTANCE_ +#define _SAME54_SERCOM4_INSTANCE_ + +/* ========== Register definition for SERCOM4 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_SERCOM4_I2CM_CTRLA (0x43000000) /**< \brief (SERCOM4) I2CM Control A */ +#define REG_SERCOM4_I2CM_CTRLB (0x43000004) /**< \brief (SERCOM4) I2CM Control B */ +#define REG_SERCOM4_I2CM_CTRLC (0x43000008) /**< \brief (SERCOM4) I2CM Control C */ +#define REG_SERCOM4_I2CM_BAUD (0x4300000C) /**< \brief (SERCOM4) I2CM Baud Rate */ +#define REG_SERCOM4_I2CM_INTENCLR (0x43000014) /**< \brief (SERCOM4) I2CM Interrupt Enable Clear */ +#define REG_SERCOM4_I2CM_INTENSET (0x43000016) /**< \brief (SERCOM4) I2CM Interrupt Enable Set */ +#define REG_SERCOM4_I2CM_INTFLAG (0x43000018) /**< \brief (SERCOM4) I2CM Interrupt Flag Status and Clear */ +#define REG_SERCOM4_I2CM_STATUS (0x4300001A) /**< \brief (SERCOM4) I2CM Status */ +#define REG_SERCOM4_I2CM_SYNCBUSY (0x4300001C) /**< \brief (SERCOM4) I2CM Synchronization Busy */ +#define REG_SERCOM4_I2CM_ADDR (0x43000024) /**< \brief (SERCOM4) I2CM Address */ +#define REG_SERCOM4_I2CM_DATA (0x43000028) /**< \brief (SERCOM4) I2CM Data */ +#define REG_SERCOM4_I2CM_DBGCTRL (0x43000030) /**< \brief (SERCOM4) I2CM Debug Control */ +#define REG_SERCOM4_I2CS_CTRLA (0x43000000) /**< \brief (SERCOM4) I2CS Control A */ +#define REG_SERCOM4_I2CS_CTRLB (0x43000004) /**< \brief (SERCOM4) I2CS Control B */ +#define REG_SERCOM4_I2CS_CTRLC (0x43000008) /**< \brief (SERCOM4) I2CS Control C */ +#define REG_SERCOM4_I2CS_INTENCLR (0x43000014) /**< \brief (SERCOM4) I2CS Interrupt Enable Clear */ +#define REG_SERCOM4_I2CS_INTENSET (0x43000016) /**< \brief (SERCOM4) I2CS Interrupt Enable Set */ +#define REG_SERCOM4_I2CS_INTFLAG (0x43000018) /**< \brief (SERCOM4) I2CS Interrupt Flag Status and Clear */ +#define REG_SERCOM4_I2CS_STATUS (0x4300001A) /**< \brief (SERCOM4) I2CS Status */ +#define REG_SERCOM4_I2CS_SYNCBUSY (0x4300001C) /**< \brief (SERCOM4) I2CS Synchronization Busy */ +#define REG_SERCOM4_I2CS_LENGTH (0x43000022) /**< \brief (SERCOM4) I2CS Length */ +#define REG_SERCOM4_I2CS_ADDR (0x43000024) /**< \brief (SERCOM4) I2CS Address */ +#define REG_SERCOM4_I2CS_DATA (0x43000028) /**< \brief (SERCOM4) I2CS Data */ +#define REG_SERCOM4_SPI_CTRLA (0x43000000) /**< \brief (SERCOM4) SPI Control A */ +#define REG_SERCOM4_SPI_CTRLB (0x43000004) /**< \brief (SERCOM4) SPI Control B */ +#define REG_SERCOM4_SPI_CTRLC (0x43000008) /**< \brief (SERCOM4) SPI Control C */ +#define REG_SERCOM4_SPI_BAUD (0x4300000C) /**< \brief (SERCOM4) SPI Baud Rate */ +#define REG_SERCOM4_SPI_INTENCLR (0x43000014) /**< \brief (SERCOM4) SPI Interrupt Enable Clear */ +#define REG_SERCOM4_SPI_INTENSET (0x43000016) /**< \brief (SERCOM4) SPI Interrupt Enable Set */ +#define REG_SERCOM4_SPI_INTFLAG (0x43000018) /**< \brief (SERCOM4) SPI Interrupt Flag Status and Clear */ +#define REG_SERCOM4_SPI_STATUS (0x4300001A) /**< \brief (SERCOM4) SPI Status */ +#define REG_SERCOM4_SPI_SYNCBUSY (0x4300001C) /**< \brief (SERCOM4) SPI Synchronization Busy */ +#define REG_SERCOM4_SPI_LENGTH (0x43000022) /**< \brief (SERCOM4) SPI Length */ +#define REG_SERCOM4_SPI_ADDR (0x43000024) /**< \brief (SERCOM4) SPI Address */ +#define REG_SERCOM4_SPI_DATA (0x43000028) /**< \brief (SERCOM4) SPI Data */ +#define REG_SERCOM4_SPI_DBGCTRL (0x43000030) /**< \brief (SERCOM4) SPI Debug Control */ +#define REG_SERCOM4_USART_CTRLA (0x43000000) /**< \brief (SERCOM4) USART Control A */ +#define REG_SERCOM4_USART_CTRLB (0x43000004) /**< \brief (SERCOM4) USART Control B */ +#define REG_SERCOM4_USART_CTRLC (0x43000008) /**< \brief (SERCOM4) USART Control C */ +#define REG_SERCOM4_USART_BAUD (0x4300000C) /**< \brief (SERCOM4) USART Baud Rate */ +#define REG_SERCOM4_USART_RXPL (0x4300000E) /**< \brief (SERCOM4) USART Receive Pulse Length */ +#define REG_SERCOM4_USART_INTENCLR (0x43000014) /**< \brief (SERCOM4) USART Interrupt Enable Clear */ +#define REG_SERCOM4_USART_INTENSET (0x43000016) /**< \brief (SERCOM4) USART Interrupt Enable Set */ +#define REG_SERCOM4_USART_INTFLAG (0x43000018) /**< \brief (SERCOM4) USART Interrupt Flag Status and Clear */ +#define REG_SERCOM4_USART_STATUS (0x4300001A) /**< \brief (SERCOM4) USART Status */ +#define REG_SERCOM4_USART_SYNCBUSY (0x4300001C) /**< \brief (SERCOM4) USART Synchronization Busy */ +#define REG_SERCOM4_USART_RXERRCNT (0x43000020) /**< \brief (SERCOM4) USART Receive Error Count */ +#define REG_SERCOM4_USART_LENGTH (0x43000022) /**< \brief (SERCOM4) USART Length */ +#define REG_SERCOM4_USART_DATA (0x43000028) /**< \brief (SERCOM4) USART Data */ +#define REG_SERCOM4_USART_DBGCTRL (0x43000030) /**< \brief (SERCOM4) USART Debug Control */ +#else +#define REG_SERCOM4_I2CM_CTRLA (*(RwReg *)0x43000000UL) /**< \brief (SERCOM4) I2CM Control A */ +#define REG_SERCOM4_I2CM_CTRLB (*(RwReg *)0x43000004UL) /**< \brief (SERCOM4) I2CM Control B */ +#define REG_SERCOM4_I2CM_CTRLC (*(RwReg *)0x43000008UL) /**< \brief (SERCOM4) I2CM Control C */ +#define REG_SERCOM4_I2CM_BAUD (*(RwReg *)0x4300000CUL) /**< \brief (SERCOM4) I2CM Baud Rate */ +#define REG_SERCOM4_I2CM_INTENCLR (*(RwReg8 *)0x43000014UL) /**< \brief (SERCOM4) I2CM Interrupt Enable Clear */ +#define REG_SERCOM4_I2CM_INTENSET (*(RwReg8 *)0x43000016UL) /**< \brief (SERCOM4) I2CM Interrupt Enable Set */ +#define REG_SERCOM4_I2CM_INTFLAG (*(RwReg8 *)0x43000018UL) /**< \brief (SERCOM4) I2CM Interrupt Flag Status and Clear */ +#define REG_SERCOM4_I2CM_STATUS (*(RwReg16*)0x4300001AUL) /**< \brief (SERCOM4) I2CM Status */ +#define REG_SERCOM4_I2CM_SYNCBUSY (*(RoReg *)0x4300001CUL) /**< \brief (SERCOM4) I2CM Synchronization Busy */ +#define REG_SERCOM4_I2CM_ADDR (*(RwReg *)0x43000024UL) /**< \brief (SERCOM4) I2CM Address */ +#define REG_SERCOM4_I2CM_DATA (*(RwReg *)0x43000028UL) /**< \brief (SERCOM4) I2CM Data */ +#define REG_SERCOM4_I2CM_DBGCTRL (*(RwReg8 *)0x43000030UL) /**< \brief (SERCOM4) I2CM Debug Control */ +#define REG_SERCOM4_I2CS_CTRLA (*(RwReg *)0x43000000UL) /**< \brief (SERCOM4) I2CS Control A */ +#define REG_SERCOM4_I2CS_CTRLB (*(RwReg *)0x43000004UL) /**< \brief (SERCOM4) I2CS Control B */ +#define REG_SERCOM4_I2CS_CTRLC (*(RwReg *)0x43000008UL) /**< \brief (SERCOM4) I2CS Control C */ +#define REG_SERCOM4_I2CS_INTENCLR (*(RwReg8 *)0x43000014UL) /**< \brief (SERCOM4) I2CS Interrupt Enable Clear */ +#define REG_SERCOM4_I2CS_INTENSET (*(RwReg8 *)0x43000016UL) /**< \brief (SERCOM4) I2CS Interrupt Enable Set */ +#define REG_SERCOM4_I2CS_INTFLAG (*(RwReg8 *)0x43000018UL) /**< \brief (SERCOM4) I2CS Interrupt Flag Status and Clear */ +#define REG_SERCOM4_I2CS_STATUS (*(RwReg16*)0x4300001AUL) /**< \brief (SERCOM4) I2CS Status */ +#define REG_SERCOM4_I2CS_SYNCBUSY (*(RoReg *)0x4300001CUL) /**< \brief (SERCOM4) I2CS Synchronization Busy */ +#define REG_SERCOM4_I2CS_LENGTH (*(RwReg16*)0x43000022UL) /**< \brief (SERCOM4) I2CS Length */ +#define REG_SERCOM4_I2CS_ADDR (*(RwReg *)0x43000024UL) /**< \brief (SERCOM4) I2CS Address */ +#define REG_SERCOM4_I2CS_DATA (*(RwReg *)0x43000028UL) /**< \brief (SERCOM4) I2CS Data */ +#define REG_SERCOM4_SPI_CTRLA (*(RwReg *)0x43000000UL) /**< \brief (SERCOM4) SPI Control A */ +#define REG_SERCOM4_SPI_CTRLB (*(RwReg *)0x43000004UL) /**< \brief (SERCOM4) SPI Control B */ +#define REG_SERCOM4_SPI_CTRLC (*(RwReg *)0x43000008UL) /**< \brief (SERCOM4) SPI Control C */ +#define REG_SERCOM4_SPI_BAUD (*(RwReg8 *)0x4300000CUL) /**< \brief (SERCOM4) SPI Baud Rate */ +#define REG_SERCOM4_SPI_INTENCLR (*(RwReg8 *)0x43000014UL) /**< \brief (SERCOM4) SPI Interrupt Enable Clear */ +#define REG_SERCOM4_SPI_INTENSET (*(RwReg8 *)0x43000016UL) /**< \brief (SERCOM4) SPI Interrupt Enable Set */ +#define REG_SERCOM4_SPI_INTFLAG (*(RwReg8 *)0x43000018UL) /**< \brief (SERCOM4) SPI Interrupt Flag Status and Clear */ +#define REG_SERCOM4_SPI_STATUS (*(RwReg16*)0x4300001AUL) /**< \brief (SERCOM4) SPI Status */ +#define REG_SERCOM4_SPI_SYNCBUSY (*(RoReg *)0x4300001CUL) /**< \brief (SERCOM4) SPI Synchronization Busy */ +#define REG_SERCOM4_SPI_LENGTH (*(RwReg16*)0x43000022UL) /**< \brief (SERCOM4) SPI Length */ +#define REG_SERCOM4_SPI_ADDR (*(RwReg *)0x43000024UL) /**< \brief (SERCOM4) SPI Address */ +#define REG_SERCOM4_SPI_DATA (*(RwReg *)0x43000028UL) /**< \brief (SERCOM4) SPI Data */ +#define REG_SERCOM4_SPI_DBGCTRL (*(RwReg8 *)0x43000030UL) /**< \brief (SERCOM4) SPI Debug Control */ +#define REG_SERCOM4_USART_CTRLA (*(RwReg *)0x43000000UL) /**< \brief (SERCOM4) USART Control A */ +#define REG_SERCOM4_USART_CTRLB (*(RwReg *)0x43000004UL) /**< \brief (SERCOM4) USART Control B */ +#define REG_SERCOM4_USART_CTRLC (*(RwReg *)0x43000008UL) /**< \brief (SERCOM4) USART Control C */ +#define REG_SERCOM4_USART_BAUD (*(RwReg16*)0x4300000CUL) /**< \brief (SERCOM4) USART Baud Rate */ +#define REG_SERCOM4_USART_RXPL (*(RwReg8 *)0x4300000EUL) /**< \brief (SERCOM4) USART Receive Pulse Length */ +#define REG_SERCOM4_USART_INTENCLR (*(RwReg8 *)0x43000014UL) /**< \brief (SERCOM4) USART Interrupt Enable Clear */ +#define REG_SERCOM4_USART_INTENSET (*(RwReg8 *)0x43000016UL) /**< \brief (SERCOM4) USART Interrupt Enable Set */ +#define REG_SERCOM4_USART_INTFLAG (*(RwReg8 *)0x43000018UL) /**< \brief (SERCOM4) USART Interrupt Flag Status and Clear */ +#define REG_SERCOM4_USART_STATUS (*(RwReg16*)0x4300001AUL) /**< \brief (SERCOM4) USART Status */ +#define REG_SERCOM4_USART_SYNCBUSY (*(RoReg *)0x4300001CUL) /**< \brief (SERCOM4) USART Synchronization Busy */ +#define REG_SERCOM4_USART_RXERRCNT (*(RoReg8 *)0x43000020UL) /**< \brief (SERCOM4) USART Receive Error Count */ +#define REG_SERCOM4_USART_LENGTH (*(RwReg16*)0x43000022UL) /**< \brief (SERCOM4) USART Length */ +#define REG_SERCOM4_USART_DATA (*(RwReg *)0x43000028UL) /**< \brief (SERCOM4) USART Data */ +#define REG_SERCOM4_USART_DBGCTRL (*(RwReg8 *)0x43000030UL) /**< \brief (SERCOM4) USART Debug Control */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/* ========== Instance parameters for SERCOM4 peripheral ========== */ +#define SERCOM4_CLK_REDUCTION 1 // Reduce clock options to pin 1 for SPI and USART +#define SERCOM4_DLY_COMPENSATION 1 // Compensates for a fast DLY50 element. Assuming 20ns +#define SERCOM4_DMA 1 // DMA support implemented? +#define SERCOM4_DMAC_ID_RX 12 // Index of DMA RX trigger +#define SERCOM4_DMAC_ID_TX 13 // Index of DMA TX trigger +#define SERCOM4_FIFO_DEPTH_POWER 1 // 2^FIFO_DEPTH_POWER gives rx FIFO depth. +#define SERCOM4_GCLK_ID_CORE 34 +#define SERCOM4_GCLK_ID_SLOW 3 +#define SERCOM4_INT_MSB 6 +#define SERCOM4_PMSB 3 +#define SERCOM4_RETENTION_SUPPORT 0 // Retention supported? +#define SERCOM4_SE_CNT 1 // SE counter included? +#define SERCOM4_SPI 1 // SPI mode implemented? +#define SERCOM4_SPI_HW_SS_CTRL 1 // Master _SS hardware control implemented? +#define SERCOM4_SPI_ICSPACE_EXT 1 // SPI inter character space implemented? +#define SERCOM4_SPI_OZMO 0 // OZMO features implemented? +#define SERCOM4_SPI_WAKE_ON_SSL 1 // _SS low detect implemented? +#define SERCOM4_TTBIT_EXTENSION 1 // 32-bit extension implemented? +#define SERCOM4_TWIM 1 // TWI Master mode implemented? +#define SERCOM4_TWIS 1 // TWI Slave mode implemented? +#define SERCOM4_TWIS_AUTO_ACK 1 // TWI slave automatic acknowledge implemented? +#define SERCOM4_TWIS_GROUP_CMD 1 // TWI slave group command implemented? +#define SERCOM4_TWIS_SDASETUP_CNT_SIZE 8 // TWIS sda setup count size +#define SERCOM4_TWIS_SDASETUP_SIZE 4 // TWIS sda setup size +#define SERCOM4_TWIS_SUDAT 1 // TWI slave SDA setup implemented? +#define SERCOM4_TWI_FASTMP 1 // TWI fast mode plus implemented? +#define SERCOM4_TWI_HSMODE 1 // USART mode implemented? +#define SERCOM4_TWI_SCLSM_MODE 1 // TWI SCL clock stretch mode implemented? +#define SERCOM4_TWI_SMB_TIMEOUTS 1 // TWI SMBus timeouts implemented? +#define SERCOM4_TWI_TENBIT_ADR 1 // TWI ten bit enabled? +#define SERCOM4_USART 1 // USART mode implemented? +#define SERCOM4_USART_AUTOBAUD 1 // USART autobaud implemented? +#define SERCOM4_USART_COLDET 1 // USART collision detection implemented? +#define SERCOM4_USART_FLOW_CTRL 1 // USART flow control implemented? +#define SERCOM4_USART_FRAC_BAUD 1 // USART fractional BAUD implemented? +#define SERCOM4_USART_IRDA 1 // USART IrDA implemented? +#define SERCOM4_USART_ISO7816 1 // USART ISO7816 mode implemented? +#define SERCOM4_USART_LIN_MASTER 1 // USART LIN Master mode implemented? +#define SERCOM4_USART_RS485 1 // USART RS485 mode implemented? +#define SERCOM4_USART_SAMPA_EXT 1 // USART sample adjust implemented? +#define SERCOM4_USART_SAMPR_EXT 1 // USART oversampling adjustment implemented? + +#endif /* _SAME54_SERCOM4_INSTANCE_ */ |