diff options
Diffstat (limited to 'include/instance/adc0.h')
| -rw-r--r-- | include/instance/adc0.h | 99 |
1 files changed, 99 insertions, 0 deletions
diff --git a/include/instance/adc0.h b/include/instance/adc0.h new file mode 100644 index 0000000..aa28f05 --- /dev/null +++ b/include/instance/adc0.h @@ -0,0 +1,99 @@ +/** + * \file + * + * \brief Instance description for ADC0 + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + +#ifndef _SAME54_ADC0_INSTANCE_ +#define _SAME54_ADC0_INSTANCE_ + +/* ========== Register definition for ADC0 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_ADC0_CTRLA (0x43001C00) /**< \brief (ADC0) Control A */ +#define REG_ADC0_EVCTRL (0x43001C02) /**< \brief (ADC0) Event Control */ +#define REG_ADC0_DBGCTRL (0x43001C03) /**< \brief (ADC0) Debug Control */ +#define REG_ADC0_INPUTCTRL (0x43001C04) /**< \brief (ADC0) Input Control */ +#define REG_ADC0_CTRLB (0x43001C06) /**< \brief (ADC0) Control B */ +#define REG_ADC0_REFCTRL (0x43001C08) /**< \brief (ADC0) Reference Control */ +#define REG_ADC0_AVGCTRL (0x43001C0A) /**< \brief (ADC0) Average Control */ +#define REG_ADC0_SAMPCTRL (0x43001C0B) /**< \brief (ADC0) Sample Time Control */ +#define REG_ADC0_WINLT (0x43001C0C) /**< \brief (ADC0) Window Monitor Lower Threshold */ +#define REG_ADC0_WINUT (0x43001C0E) /**< \brief (ADC0) Window Monitor Upper Threshold */ +#define REG_ADC0_GAINCORR (0x43001C10) /**< \brief (ADC0) Gain Correction */ +#define REG_ADC0_OFFSETCORR (0x43001C12) /**< \brief (ADC0) Offset Correction */ +#define REG_ADC0_SWTRIG (0x43001C14) /**< \brief (ADC0) Software Trigger */ +#define REG_ADC0_INTENCLR (0x43001C2C) /**< \brief (ADC0) Interrupt Enable Clear */ +#define REG_ADC0_INTENSET (0x43001C2D) /**< \brief (ADC0) Interrupt Enable Set */ +#define REG_ADC0_INTFLAG (0x43001C2E) /**< \brief (ADC0) Interrupt Flag Status and Clear */ +#define REG_ADC0_STATUS (0x43001C2F) /**< \brief (ADC0) Status */ +#define REG_ADC0_SYNCBUSY (0x43001C30) /**< \brief (ADC0) Synchronization Busy */ +#define REG_ADC0_DSEQDATA (0x43001C34) /**< \brief (ADC0) DMA Sequencial Data */ +#define REG_ADC0_DSEQCTRL (0x43001C38) /**< \brief (ADC0) DMA Sequential Control */ +#define REG_ADC0_DSEQSTAT (0x43001C3C) /**< \brief (ADC0) DMA Sequencial Status */ +#define REG_ADC0_RESULT (0x43001C40) /**< \brief (ADC0) Result Conversion Value */ +#define REG_ADC0_RESS (0x43001C44) /**< \brief (ADC0) Last Sample Result */ +#define REG_ADC0_CALIB (0x43001C48) /**< \brief (ADC0) Calibration */ +#else +#define REG_ADC0_CTRLA (*(RwReg16*)0x43001C00UL) /**< \brief (ADC0) Control A */ +#define REG_ADC0_EVCTRL (*(RwReg8 *)0x43001C02UL) /**< \brief (ADC0) Event Control */ +#define REG_ADC0_DBGCTRL (*(RwReg8 *)0x43001C03UL) /**< \brief (ADC0) Debug Control */ +#define REG_ADC0_INPUTCTRL (*(RwReg16*)0x43001C04UL) /**< \brief (ADC0) Input Control */ +#define REG_ADC0_CTRLB (*(RwReg16*)0x43001C06UL) /**< \brief (ADC0) Control B */ +#define REG_ADC0_REFCTRL (*(RwReg8 *)0x43001C08UL) /**< \brief (ADC0) Reference Control */ +#define REG_ADC0_AVGCTRL (*(RwReg8 *)0x43001C0AUL) /**< \brief (ADC0) Average Control */ +#define REG_ADC0_SAMPCTRL (*(RwReg8 *)0x43001C0BUL) /**< \brief (ADC0) Sample Time Control */ +#define REG_ADC0_WINLT (*(RwReg16*)0x43001C0CUL) /**< \brief (ADC0) Window Monitor Lower Threshold */ +#define REG_ADC0_WINUT (*(RwReg16*)0x43001C0EUL) /**< \brief (ADC0) Window Monitor Upper Threshold */ +#define REG_ADC0_GAINCORR (*(RwReg16*)0x43001C10UL) /**< \brief (ADC0) Gain Correction */ +#define REG_ADC0_OFFSETCORR (*(RwReg16*)0x43001C12UL) /**< \brief (ADC0) Offset Correction */ +#define REG_ADC0_SWTRIG (*(RwReg8 *)0x43001C14UL) /**< \brief (ADC0) Software Trigger */ +#define REG_ADC0_INTENCLR (*(RwReg8 *)0x43001C2CUL) /**< \brief (ADC0) Interrupt Enable Clear */ +#define REG_ADC0_INTENSET (*(RwReg8 *)0x43001C2DUL) /**< \brief (ADC0) Interrupt Enable Set */ +#define REG_ADC0_INTFLAG (*(RwReg8 *)0x43001C2EUL) /**< \brief (ADC0) Interrupt Flag Status and Clear */ +#define REG_ADC0_STATUS (*(RoReg8 *)0x43001C2FUL) /**< \brief (ADC0) Status */ +#define REG_ADC0_SYNCBUSY (*(RoReg *)0x43001C30UL) /**< \brief (ADC0) Synchronization Busy */ +#define REG_ADC0_DSEQDATA (*(WoReg *)0x43001C34UL) /**< \brief (ADC0) DMA Sequencial Data */ +#define REG_ADC0_DSEQCTRL (*(RwReg *)0x43001C38UL) /**< \brief (ADC0) DMA Sequential Control */ +#define REG_ADC0_DSEQSTAT (*(RoReg *)0x43001C3CUL) /**< \brief (ADC0) DMA Sequencial Status */ +#define REG_ADC0_RESULT (*(RoReg16*)0x43001C40UL) /**< \brief (ADC0) Result Conversion Value */ +#define REG_ADC0_RESS (*(RoReg16*)0x43001C44UL) /**< \brief (ADC0) Last Sample Result */ +#define REG_ADC0_CALIB (*(RwReg16*)0x43001C48UL) /**< \brief (ADC0) Calibration */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/* ========== Instance parameters for ADC0 peripheral ========== */ +#define ADC0_BANDGAP 27 // MUXPOS value to select BANDGAP +#define ADC0_CTAT 29 // MUXPOS value to select CTAT +#define ADC0_DMAC_ID_RESRDY 68 // index of DMA RESRDY trigger +#define ADC0_DMAC_ID_SEQ 69 // Index of DMA SEQ trigger +#define ADC0_EXTCHANNEL_MSB 15 // Number of external channels +#define ADC0_GCLK_ID 40 // index of Generic Clock +#define ADC0_MASTER_SLAVE_MODE 1 // ADC Master/Slave Mode +#define ADC0_OPAMP2 0 // MUXPOS value to select OPAMP2 +#define ADC0_OPAMP01 0 // MUXPOS value to select OPAMP01 +#define ADC0_PTAT 28 // MUXPOS value to select PTAT +#define ADC0_TOUCH_IMPLEMENTED 1 // TOUCH implemented or not + +#endif /* _SAME54_ADC0_INSTANCE_ */ |