diff options
| author | Kévin Redon <kredon@sysmocom.de> | 2018-12-11 17:43:40 +0100 |
|---|---|---|
| committer | Kévin Redon <kredon@sysmocom.de> | 2019-01-09 15:33:36 +0100 |
| commit | 8476b94ab008805db1e91d74fc47b1619953f48b (patch) | |
| tree | aed8d9f0aaab2a07dc5c3c7d1bf7fae8ff396ead /config | |
use USB CDC Echo example project
this is the USB CDC Echo example project source code,
for the Microchip SAM E54 Xplained Pro development board,
based on the ATSAME54P20A micro-controller,
exported from the Atmel START website,
using the ASFv4 library.
Change-Id: Ic0e58e42d1a4076bc84a0a8d3509ec4b09a37f46
Diffstat (limited to 'config')
| -rw-r--r-- | config/hpl_cmcc_config.h | 54 | ||||
| -rw-r--r-- | config/hpl_dmac_config.h | 7277 | ||||
| -rw-r--r-- | config/hpl_gclk_config.h | 920 | ||||
| -rw-r--r-- | config/hpl_mclk_config.h | 104 | ||||
| -rw-r--r-- | config/hpl_osc32kctrl_config.h | 165 | ||||
| -rw-r--r-- | config/hpl_oscctrl_config.h | 634 | ||||
| -rw-r--r-- | config/hpl_port_config.h | 522 | ||||
| -rw-r--r-- | config/hpl_usb_config.h | 355 | ||||
| -rw-r--r-- | config/peripheral_clk_config.h | 58 | ||||
| -rw-r--r-- | config/usbd_config.h | 342 |
10 files changed, 10431 insertions, 0 deletions
diff --git a/config/hpl_cmcc_config.h b/config/hpl_cmcc_config.h new file mode 100644 index 0000000..8590736 --- /dev/null +++ b/config/hpl_cmcc_config.h @@ -0,0 +1,54 @@ +/* Auto-generated config file hpl_cmcc_config.h */ +#ifndef HPL_CMCC_CONFIG_H +#define HPL_CMCC_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// <h> Basic Configuration + +// <q> Cache enable +//<i> Defines the cache should be enabled or not. +// <id> cmcc_enable +#ifndef CONF_CMCC_ENABLE +#define CONF_CMCC_ENABLE 0x0 +#endif + +// <o> Cache Size +//<i> Defines the cache memory size to be configured. +// <0x0=>1 KB +// <0x1=>2 KB +// <0x2=>4 KB +// <id> cache_size +#ifndef CONF_CMCC_CACHE_SIZE +#define CONF_CMCC_CACHE_SIZE 0x2 +#endif + +// <e> Advanced Configuration +// <id> cmcc_advanced_configuration +// <q> Data cache disable +//<i> Defines the data cache should be disabled or not. +// <id> cmcc_data_cache_disable +#ifndef CONF_CMCC_DATA_CACHE_DISABLE +#define CONF_CMCC_DATA_CACHE_DISABLE 0x0 +#endif + +// <q> Instruction cache disable +//<i> Defines the Instruction cache should be disabled or not. +// <id> cmcc_inst_cache_disable +#ifndef CONF_CMCC_INST_CACHE_DISABLE +#define CONF_CMCC_INST_CACHE_DISABLE 0x0 +#endif + +// <q> Clock Gating disable +//<i> Defines the clock gating should be disabled or not. +// <id> cmcc_clock_gating_disable +#ifndef CONF_CMCC_CLK_GATING_DISABLE +#define CONF_CMCC_CLK_GATING_DISABLE 0x0 +#endif + +// </e> +// </h> + +// <<< end of configuration section >>> + +#endif // HPL_CMCC_CONFIG_H diff --git a/config/hpl_dmac_config.h b/config/hpl_dmac_config.h new file mode 100644 index 0000000..90499fc --- /dev/null +++ b/config/hpl_dmac_config.h @@ -0,0 +1,7277 @@ +/* Auto-generated config file hpl_dmac_config.h */ +#ifndef HPL_DMAC_CONFIG_H +#define HPL_DMAC_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// <e> DMAC enable +// <i> Indicates whether dmac is enabled or not +// <id> dmac_enable +#ifndef CONF_DMAC_ENABLE +#define CONF_DMAC_ENABLE 0 +#endif + +// <q> Priority Level 0 +// <i> Indicates whether Priority Level 0 is enabled or not +// <id> dmac_lvlen0 +#ifndef CONF_DMAC_LVLEN0 +#define CONF_DMAC_LVLEN0 1 +#endif + +// <o> Level 0 Round-Robin Arbitration +// <0=> Static arbitration scheme for channel with priority 0 +// <1=> Round-robin arbitration scheme for channel with priority 0 +// <i> Defines Level 0 Arbitration for DMA channels +// <id> dmac_rrlvlen0 +#ifndef CONF_DMAC_RRLVLEN0 +#define CONF_DMAC_RRLVLEN0 0 +#endif + +// <o> Level 0 Channel Priority Number <0x00-0xFF> +// <id> dmac_lvlpri0 +#ifndef CONF_DMAC_LVLPRI0 +#define CONF_DMAC_LVLPRI0 0 +#endif +// <q> Priority Level 1 +// <i> Indicates whether Priority Level 1 is enabled or not +// <id> dmac_lvlen1 +#ifndef CONF_DMAC_LVLEN1 +#define CONF_DMAC_LVLEN1 1 +#endif + +// <o> Level 1 Round-Robin Arbitration +// <0=> Static arbitration scheme for channel with priority 1 +// <1=> Round-robin arbitration scheme for channel with priority 1 +// <i> Defines Level 1 Arbitration for DMA channels +// <id> dmac_rrlvlen1 +#ifndef CONF_DMAC_RRLVLEN1 +#define CONF_DMAC_RRLVLEN1 0 +#endif + +// <o> Level 1 Channel Priority Number <0x00-0xFF> +// <id> dmac_lvlpri1 +#ifndef CONF_DMAC_LVLPRI1 +#define CONF_DMAC_LVLPRI1 0 +#endif +// <q> Priority Level 2 +// <i> Indicates whether Priority Level 2 is enabled or not +// <id> dmac_lvlen2 +#ifndef CONF_DMAC_LVLEN2 +#define CONF_DMAC_LVLEN2 1 +#endif + +// <o> Level 2 Round-Robin Arbitration +// <0=> Static arbitration scheme for channel with priority 2 +// <1=> Round-robin arbitration scheme for channel with priority 2 +// <i> Defines Level 2 Arbitration for DMA channels +// <id> dmac_rrlvlen2 +#ifndef CONF_DMAC_RRLVLEN2 +#define CONF_DMAC_RRLVLEN2 0 +#endif + +// <o> Level 2 Channel Priority Number <0x00-0xFF> +// <id> dmac_lvlpri2 +#ifndef CONF_DMAC_LVLPRI2 +#define CONF_DMAC_LVLPRI2 0 +#endif +// <q> Priority Level 3 +// <i> Indicates whether Priority Level 3 is enabled or not +// <id> dmac_lvlen3 +#ifndef CONF_DMAC_LVLEN3 +#define CONF_DMAC_LVLEN3 1 +#endif + +// <o> Level 3 Round-Robin Arbitration +// <0=> Static arbitration scheme for channel with priority 3 +// <1=> Round-robin arbitration scheme for channel with priority 3 +// <i> Defines Level 3 Arbitration for DMA channels +// <id> dmac_rrlvlen3 +#ifndef CONF_DMAC_RRLVLEN3 +#define CONF_DMAC_RRLVLEN3 0 +#endif + +// <o> Level 3 Channel Priority Number <0x00-0xFF> +// <id> dmac_lvlpri3 +#ifndef CONF_DMAC_LVLPRI3 +#define CONF_DMAC_LVLPRI3 0 +#endif +// <q> Debug Run +// <i> Indicates whether Debug Run is enabled or not +// <id> dmac_dbgrun +#ifndef CONF_DMAC_DBGRUN +#define CONF_DMAC_DBGRUN 0 +#endif + +// <e> Channel 0 settings +// <id> dmac_channel_0_settings +#ifndef CONF_DMAC_CHANNEL_0_SETTINGS +#define CONF_DMAC_CHANNEL_0_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 0 is running in standby mode or not +// <id> dmac_runstdby_0 +#ifndef CONF_DMAC_RUNSTDBY_0 +#define CONF_DMAC_RUNSTDBY_0 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_0 +#ifndef CONF_DMAC_TRIGACT_0 +#define CONF_DMAC_TRIGACT_0 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_0 +#ifndef CONF_DMAC_TRIGSRC_0 +#define CONF_DMAC_TRIGSRC_0 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_0 +#ifndef CONF_DMAC_LVL_0 +#define CONF_DMAC_LVL_0 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_0 +#ifndef CONF_DMAC_EVOE_0 +#define CONF_DMAC_EVOE_0 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_0 +#ifndef CONF_DMAC_EVIE_0 +#define CONF_DMAC_EVIE_0 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_0 +#ifndef CONF_DMAC_EVACT_0 +#define CONF_DMAC_EVACT_0 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_0 +#ifndef CONF_DMAC_STEPSIZE_0 +#define CONF_DMAC_STEPSIZE_0 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_0 +#ifndef CONF_DMAC_STEPSEL_0 +#define CONF_DMAC_STEPSEL_0 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_0 +#ifndef CONF_DMAC_SRCINC_0 +#define CONF_DMAC_SRCINC_0 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_0 +#ifndef CONF_DMAC_DSTINC_0 +#define CONF_DMAC_DSTINC_0 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_0 +#ifndef CONF_DMAC_BEATSIZE_0 +#define CONF_DMAC_BEATSIZE_0 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_0 +#ifndef CONF_DMAC_BLOCKACT_0 +#define CONF_DMAC_BLOCKACT_0 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_0 +#ifndef CONF_DMAC_EVOSEL_0 +#define CONF_DMAC_EVOSEL_0 0 +#endif +// </e> + +// <e> Channel 1 settings +// <id> dmac_channel_1_settings +#ifndef CONF_DMAC_CHANNEL_1_SETTINGS +#define CONF_DMAC_CHANNEL_1_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 1 is running in standby mode or not +// <id> dmac_runstdby_1 +#ifndef CONF_DMAC_RUNSTDBY_1 +#define CONF_DMAC_RUNSTDBY_1 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_1 +#ifndef CONF_DMAC_TRIGACT_1 +#define CONF_DMAC_TRIGACT_1 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_1 +#ifndef CONF_DMAC_TRIGSRC_1 +#define CONF_DMAC_TRIGSRC_1 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_1 +#ifndef CONF_DMAC_LVL_1 +#define CONF_DMAC_LVL_1 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_1 +#ifndef CONF_DMAC_EVOE_1 +#define CONF_DMAC_EVOE_1 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_1 +#ifndef CONF_DMAC_EVIE_1 +#define CONF_DMAC_EVIE_1 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_1 +#ifndef CONF_DMAC_EVACT_1 +#define CONF_DMAC_EVACT_1 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_1 +#ifndef CONF_DMAC_STEPSIZE_1 +#define CONF_DMAC_STEPSIZE_1 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_1 +#ifndef CONF_DMAC_STEPSEL_1 +#define CONF_DMAC_STEPSEL_1 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_1 +#ifndef CONF_DMAC_SRCINC_1 +#define CONF_DMAC_SRCINC_1 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_1 +#ifndef CONF_DMAC_DSTINC_1 +#define CONF_DMAC_DSTINC_1 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_1 +#ifndef CONF_DMAC_BEATSIZE_1 +#define CONF_DMAC_BEATSIZE_1 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_1 +#ifndef CONF_DMAC_BLOCKACT_1 +#define CONF_DMAC_BLOCKACT_1 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_1 +#ifndef CONF_DMAC_EVOSEL_1 +#define CONF_DMAC_EVOSEL_1 0 +#endif +// </e> + +// <e> Channel 2 settings +// <id> dmac_channel_2_settings +#ifndef CONF_DMAC_CHANNEL_2_SETTINGS +#define CONF_DMAC_CHANNEL_2_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 2 is running in standby mode or not +// <id> dmac_runstdby_2 +#ifndef CONF_DMAC_RUNSTDBY_2 +#define CONF_DMAC_RUNSTDBY_2 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_2 +#ifndef CONF_DMAC_TRIGACT_2 +#define CONF_DMAC_TRIGACT_2 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_2 +#ifndef CONF_DMAC_TRIGSRC_2 +#define CONF_DMAC_TRIGSRC_2 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_2 +#ifndef CONF_DMAC_LVL_2 +#define CONF_DMAC_LVL_2 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_2 +#ifndef CONF_DMAC_EVOE_2 +#define CONF_DMAC_EVOE_2 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_2 +#ifndef CONF_DMAC_EVIE_2 +#define CONF_DMAC_EVIE_2 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_2 +#ifndef CONF_DMAC_EVACT_2 +#define CONF_DMAC_EVACT_2 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_2 +#ifndef CONF_DMAC_STEPSIZE_2 +#define CONF_DMAC_STEPSIZE_2 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_2 +#ifndef CONF_DMAC_STEPSEL_2 +#define CONF_DMAC_STEPSEL_2 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_2 +#ifndef CONF_DMAC_SRCINC_2 +#define CONF_DMAC_SRCINC_2 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_2 +#ifndef CONF_DMAC_DSTINC_2 +#define CONF_DMAC_DSTINC_2 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_2 +#ifndef CONF_DMAC_BEATSIZE_2 +#define CONF_DMAC_BEATSIZE_2 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_2 +#ifndef CONF_DMAC_BLOCKACT_2 +#define CONF_DMAC_BLOCKACT_2 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_2 +#ifndef CONF_DMAC_EVOSEL_2 +#define CONF_DMAC_EVOSEL_2 0 +#endif +// </e> + +// <e> Channel 3 settings +// <id> dmac_channel_3_settings +#ifndef CONF_DMAC_CHANNEL_3_SETTINGS +#define CONF_DMAC_CHANNEL_3_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 3 is running in standby mode or not +// <id> dmac_runstdby_3 +#ifndef CONF_DMAC_RUNSTDBY_3 +#define CONF_DMAC_RUNSTDBY_3 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_3 +#ifndef CONF_DMAC_TRIGACT_3 +#define CONF_DMAC_TRIGACT_3 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_3 +#ifndef CONF_DMAC_TRIGSRC_3 +#define CONF_DMAC_TRIGSRC_3 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_3 +#ifndef CONF_DMAC_LVL_3 +#define CONF_DMAC_LVL_3 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_3 +#ifndef CONF_DMAC_EVOE_3 +#define CONF_DMAC_EVOE_3 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_3 +#ifndef CONF_DMAC_EVIE_3 +#define CONF_DMAC_EVIE_3 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_3 +#ifndef CONF_DMAC_EVACT_3 +#define CONF_DMAC_EVACT_3 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_3 +#ifndef CONF_DMAC_STEPSIZE_3 +#define CONF_DMAC_STEPSIZE_3 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_3 +#ifndef CONF_DMAC_STEPSEL_3 +#define CONF_DMAC_STEPSEL_3 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_3 +#ifndef CONF_DMAC_SRCINC_3 +#define CONF_DMAC_SRCINC_3 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_3 +#ifndef CONF_DMAC_DSTINC_3 +#define CONF_DMAC_DSTINC_3 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_3 +#ifndef CONF_DMAC_BEATSIZE_3 +#define CONF_DMAC_BEATSIZE_3 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_3 +#ifndef CONF_DMAC_BLOCKACT_3 +#define CONF_DMAC_BLOCKACT_3 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_3 +#ifndef CONF_DMAC_EVOSEL_3 +#define CONF_DMAC_EVOSEL_3 0 +#endif +// </e> + +// <e> Channel 4 settings +// <id> dmac_channel_4_settings +#ifndef CONF_DMAC_CHANNEL_4_SETTINGS +#define CONF_DMAC_CHANNEL_4_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 4 is running in standby mode or not +// <id> dmac_runstdby_4 +#ifndef CONF_DMAC_RUNSTDBY_4 +#define CONF_DMAC_RUNSTDBY_4 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_4 +#ifndef CONF_DMAC_TRIGACT_4 +#define CONF_DMAC_TRIGACT_4 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_4 +#ifndef CONF_DMAC_TRIGSRC_4 +#define CONF_DMAC_TRIGSRC_4 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_4 +#ifndef CONF_DMAC_LVL_4 +#define CONF_DMAC_LVL_4 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_4 +#ifndef CONF_DMAC_EVOE_4 +#define CONF_DMAC_EVOE_4 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_4 +#ifndef CONF_DMAC_EVIE_4 +#define CONF_DMAC_EVIE_4 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_4 +#ifndef CONF_DMAC_EVACT_4 +#define CONF_DMAC_EVACT_4 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_4 +#ifndef CONF_DMAC_STEPSIZE_4 +#define CONF_DMAC_STEPSIZE_4 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_4 +#ifndef CONF_DMAC_STEPSEL_4 +#define CONF_DMAC_STEPSEL_4 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_4 +#ifndef CONF_DMAC_SRCINC_4 +#define CONF_DMAC_SRCINC_4 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_4 +#ifndef CONF_DMAC_DSTINC_4 +#define CONF_DMAC_DSTINC_4 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_4 +#ifndef CONF_DMAC_BEATSIZE_4 +#define CONF_DMAC_BEATSIZE_4 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_4 +#ifndef CONF_DMAC_BLOCKACT_4 +#define CONF_DMAC_BLOCKACT_4 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_4 +#ifndef CONF_DMAC_EVOSEL_4 +#define CONF_DMAC_EVOSEL_4 0 +#endif +// </e> + +// <e> Channel 5 settings +// <id> dmac_channel_5_settings +#ifndef CONF_DMAC_CHANNEL_5_SETTINGS +#define CONF_DMAC_CHANNEL_5_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 5 is running in standby mode or not +// <id> dmac_runstdby_5 +#ifndef CONF_DMAC_RUNSTDBY_5 +#define CONF_DMAC_RUNSTDBY_5 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_5 +#ifndef CONF_DMAC_TRIGACT_5 +#define CONF_DMAC_TRIGACT_5 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_5 +#ifndef CONF_DMAC_TRIGSRC_5 +#define CONF_DMAC_TRIGSRC_5 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_5 +#ifndef CONF_DMAC_LVL_5 +#define CONF_DMAC_LVL_5 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_5 +#ifndef CONF_DMAC_EVOE_5 +#define CONF_DMAC_EVOE_5 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_5 +#ifndef CONF_DMAC_EVIE_5 +#define CONF_DMAC_EVIE_5 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_5 +#ifndef CONF_DMAC_EVACT_5 +#define CONF_DMAC_EVACT_5 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_5 +#ifndef CONF_DMAC_STEPSIZE_5 +#define CONF_DMAC_STEPSIZE_5 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_5 +#ifndef CONF_DMAC_STEPSEL_5 +#define CONF_DMAC_STEPSEL_5 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_5 +#ifndef CONF_DMAC_SRCINC_5 +#define CONF_DMAC_SRCINC_5 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_5 +#ifndef CONF_DMAC_DSTINC_5 +#define CONF_DMAC_DSTINC_5 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_5 +#ifndef CONF_DMAC_BEATSIZE_5 +#define CONF_DMAC_BEATSIZE_5 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_5 +#ifndef CONF_DMAC_BLOCKACT_5 +#define CONF_DMAC_BLOCKACT_5 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_5 +#ifndef CONF_DMAC_EVOSEL_5 +#define CONF_DMAC_EVOSEL_5 0 +#endif +// </e> + +// <e> Channel 6 settings +// <id> dmac_channel_6_settings +#ifndef CONF_DMAC_CHANNEL_6_SETTINGS +#define CONF_DMAC_CHANNEL_6_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 6 is running in standby mode or not +// <id> dmac_runstdby_6 +#ifndef CONF_DMAC_RUNSTDBY_6 +#define CONF_DMAC_RUNSTDBY_6 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_6 +#ifndef CONF_DMAC_TRIGACT_6 +#define CONF_DMAC_TRIGACT_6 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_6 +#ifndef CONF_DMAC_TRIGSRC_6 +#define CONF_DMAC_TRIGSRC_6 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_6 +#ifndef CONF_DMAC_LVL_6 +#define CONF_DMAC_LVL_6 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_6 +#ifndef CONF_DMAC_EVOE_6 +#define CONF_DMAC_EVOE_6 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_6 +#ifndef CONF_DMAC_EVIE_6 +#define CONF_DMAC_EVIE_6 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_6 +#ifndef CONF_DMAC_EVACT_6 +#define CONF_DMAC_EVACT_6 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_6 +#ifndef CONF_DMAC_STEPSIZE_6 +#define CONF_DMAC_STEPSIZE_6 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_6 +#ifndef CONF_DMAC_STEPSEL_6 +#define CONF_DMAC_STEPSEL_6 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_6 +#ifndef CONF_DMAC_SRCINC_6 +#define CONF_DMAC_SRCINC_6 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_6 +#ifndef CONF_DMAC_DSTINC_6 +#define CONF_DMAC_DSTINC_6 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_6 +#ifndef CONF_DMAC_BEATSIZE_6 +#define CONF_DMAC_BEATSIZE_6 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_6 +#ifndef CONF_DMAC_BLOCKACT_6 +#define CONF_DMAC_BLOCKACT_6 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_6 +#ifndef CONF_DMAC_EVOSEL_6 +#define CONF_DMAC_EVOSEL_6 0 +#endif +// </e> + +// <e> Channel 7 settings +// <id> dmac_channel_7_settings +#ifndef CONF_DMAC_CHANNEL_7_SETTINGS +#define CONF_DMAC_CHANNEL_7_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 7 is running in standby mode or not +// <id> dmac_runstdby_7 +#ifndef CONF_DMAC_RUNSTDBY_7 +#define CONF_DMAC_RUNSTDBY_7 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_7 +#ifndef CONF_DMAC_TRIGACT_7 +#define CONF_DMAC_TRIGACT_7 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_7 +#ifndef CONF_DMAC_TRIGSRC_7 +#define CONF_DMAC_TRIGSRC_7 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_7 +#ifndef CONF_DMAC_LVL_7 +#define CONF_DMAC_LVL_7 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_7 +#ifndef CONF_DMAC_EVOE_7 +#define CONF_DMAC_EVOE_7 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_7 +#ifndef CONF_DMAC_EVIE_7 +#define CONF_DMAC_EVIE_7 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_7 +#ifndef CONF_DMAC_EVACT_7 +#define CONF_DMAC_EVACT_7 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_7 +#ifndef CONF_DMAC_STEPSIZE_7 +#define CONF_DMAC_STEPSIZE_7 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_7 +#ifndef CONF_DMAC_STEPSEL_7 +#define CONF_DMAC_STEPSEL_7 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_7 +#ifndef CONF_DMAC_SRCINC_7 +#define CONF_DMAC_SRCINC_7 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_7 +#ifndef CONF_DMAC_DSTINC_7 +#define CONF_DMAC_DSTINC_7 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_7 +#ifndef CONF_DMAC_BEATSIZE_7 +#define CONF_DMAC_BEATSIZE_7 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_7 +#ifndef CONF_DMAC_BLOCKACT_7 +#define CONF_DMAC_BLOCKACT_7 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_7 +#ifndef CONF_DMAC_EVOSEL_7 +#define CONF_DMAC_EVOSEL_7 0 +#endif +// </e> + +// <e> Channel 8 settings +// <id> dmac_channel_8_settings +#ifndef CONF_DMAC_CHANNEL_8_SETTINGS +#define CONF_DMAC_CHANNEL_8_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 8 is running in standby mode or not +// <id> dmac_runstdby_8 +#ifndef CONF_DMAC_RUNSTDBY_8 +#define CONF_DMAC_RUNSTDBY_8 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_8 +#ifndef CONF_DMAC_TRIGACT_8 +#define CONF_DMAC_TRIGACT_8 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_8 +#ifndef CONF_DMAC_TRIGSRC_8 +#define CONF_DMAC_TRIGSRC_8 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_8 +#ifndef CONF_DMAC_LVL_8 +#define CONF_DMAC_LVL_8 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_8 +#ifndef CONF_DMAC_EVOE_8 +#define CONF_DMAC_EVOE_8 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_8 +#ifndef CONF_DMAC_EVIE_8 +#define CONF_DMAC_EVIE_8 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_8 +#ifndef CONF_DMAC_EVACT_8 +#define CONF_DMAC_EVACT_8 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_8 +#ifndef CONF_DMAC_STEPSIZE_8 +#define CONF_DMAC_STEPSIZE_8 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_8 +#ifndef CONF_DMAC_STEPSEL_8 +#define CONF_DMAC_STEPSEL_8 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_8 +#ifndef CONF_DMAC_SRCINC_8 +#define CONF_DMAC_SRCINC_8 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_8 +#ifndef CONF_DMAC_DSTINC_8 +#define CONF_DMAC_DSTINC_8 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_8 +#ifndef CONF_DMAC_BEATSIZE_8 +#define CONF_DMAC_BEATSIZE_8 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_8 +#ifndef CONF_DMAC_BLOCKACT_8 +#define CONF_DMAC_BLOCKACT_8 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_8 +#ifndef CONF_DMAC_EVOSEL_8 +#define CONF_DMAC_EVOSEL_8 0 +#endif +// </e> + +// <e> Channel 9 settings +// <id> dmac_channel_9_settings +#ifndef CONF_DMAC_CHANNEL_9_SETTINGS +#define CONF_DMAC_CHANNEL_9_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 9 is running in standby mode or not +// <id> dmac_runstdby_9 +#ifndef CONF_DMAC_RUNSTDBY_9 +#define CONF_DMAC_RUNSTDBY_9 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_9 +#ifndef CONF_DMAC_TRIGACT_9 +#define CONF_DMAC_TRIGACT_9 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_9 +#ifndef CONF_DMAC_TRIGSRC_9 +#define CONF_DMAC_TRIGSRC_9 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_9 +#ifndef CONF_DMAC_LVL_9 +#define CONF_DMAC_LVL_9 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_9 +#ifndef CONF_DMAC_EVOE_9 +#define CONF_DMAC_EVOE_9 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_9 +#ifndef CONF_DMAC_EVIE_9 +#define CONF_DMAC_EVIE_9 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_9 +#ifndef CONF_DMAC_EVACT_9 +#define CONF_DMAC_EVACT_9 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_9 +#ifndef CONF_DMAC_STEPSIZE_9 +#define CONF_DMAC_STEPSIZE_9 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_9 +#ifndef CONF_DMAC_STEPSEL_9 +#define CONF_DMAC_STEPSEL_9 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_9 +#ifndef CONF_DMAC_SRCINC_9 +#define CONF_DMAC_SRCINC_9 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_9 +#ifndef CONF_DMAC_DSTINC_9 +#define CONF_DMAC_DSTINC_9 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_9 +#ifndef CONF_DMAC_BEATSIZE_9 +#define CONF_DMAC_BEATSIZE_9 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_9 +#ifndef CONF_DMAC_BLOCKACT_9 +#define CONF_DMAC_BLOCKACT_9 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_9 +#ifndef CONF_DMAC_EVOSEL_9 +#define CONF_DMAC_EVOSEL_9 0 +#endif +// </e> + +// <e> Channel 10 settings +// <id> dmac_channel_10_settings +#ifndef CONF_DMAC_CHANNEL_10_SETTINGS +#define CONF_DMAC_CHANNEL_10_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 10 is running in standby mode or not +// <id> dmac_runstdby_10 +#ifndef CONF_DMAC_RUNSTDBY_10 +#define CONF_DMAC_RUNSTDBY_10 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_10 +#ifndef CONF_DMAC_TRIGACT_10 +#define CONF_DMAC_TRIGACT_10 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_10 +#ifndef CONF_DMAC_TRIGSRC_10 +#define CONF_DMAC_TRIGSRC_10 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_10 +#ifndef CONF_DMAC_LVL_10 +#define CONF_DMAC_LVL_10 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_10 +#ifndef CONF_DMAC_EVOE_10 +#define CONF_DMAC_EVOE_10 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_10 +#ifndef CONF_DMAC_EVIE_10 +#define CONF_DMAC_EVIE_10 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_10 +#ifndef CONF_DMAC_EVACT_10 +#define CONF_DMAC_EVACT_10 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_10 +#ifndef CONF_DMAC_STEPSIZE_10 +#define CONF_DMAC_STEPSIZE_10 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_10 +#ifndef CONF_DMAC_STEPSEL_10 +#define CONF_DMAC_STEPSEL_10 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_10 +#ifndef CONF_DMAC_SRCINC_10 +#define CONF_DMAC_SRCINC_10 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_10 +#ifndef CONF_DMAC_DSTINC_10 +#define CONF_DMAC_DSTINC_10 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_10 +#ifndef CONF_DMAC_BEATSIZE_10 +#define CONF_DMAC_BEATSIZE_10 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_10 +#ifndef CONF_DMAC_BLOCKACT_10 +#define CONF_DMAC_BLOCKACT_10 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_10 +#ifndef CONF_DMAC_EVOSEL_10 +#define CONF_DMAC_EVOSEL_10 0 +#endif +// </e> + +// <e> Channel 11 settings +// <id> dmac_channel_11_settings +#ifndef CONF_DMAC_CHANNEL_11_SETTINGS +#define CONF_DMAC_CHANNEL_11_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 11 is running in standby mode or not +// <id> dmac_runstdby_11 +#ifndef CONF_DMAC_RUNSTDBY_11 +#define CONF_DMAC_RUNSTDBY_11 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_11 +#ifndef CONF_DMAC_TRIGACT_11 +#define CONF_DMAC_TRIGACT_11 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_11 +#ifndef CONF_DMAC_TRIGSRC_11 +#define CONF_DMAC_TRIGSRC_11 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_11 +#ifndef CONF_DMAC_LVL_11 +#define CONF_DMAC_LVL_11 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_11 +#ifndef CONF_DMAC_EVOE_11 +#define CONF_DMAC_EVOE_11 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_11 +#ifndef CONF_DMAC_EVIE_11 +#define CONF_DMAC_EVIE_11 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_11 +#ifndef CONF_DMAC_EVACT_11 +#define CONF_DMAC_EVACT_11 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_11 +#ifndef CONF_DMAC_STEPSIZE_11 +#define CONF_DMAC_STEPSIZE_11 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_11 +#ifndef CONF_DMAC_STEPSEL_11 +#define CONF_DMAC_STEPSEL_11 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_11 +#ifndef CONF_DMAC_SRCINC_11 +#define CONF_DMAC_SRCINC_11 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_11 +#ifndef CONF_DMAC_DSTINC_11 +#define CONF_DMAC_DSTINC_11 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_11 +#ifndef CONF_DMAC_BEATSIZE_11 +#define CONF_DMAC_BEATSIZE_11 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_11 +#ifndef CONF_DMAC_BLOCKACT_11 +#define CONF_DMAC_BLOCKACT_11 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_11 +#ifndef CONF_DMAC_EVOSEL_11 +#define CONF_DMAC_EVOSEL_11 0 +#endif +// </e> + +// <e> Channel 12 settings +// <id> dmac_channel_12_settings +#ifndef CONF_DMAC_CHANNEL_12_SETTINGS +#define CONF_DMAC_CHANNEL_12_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 12 is running in standby mode or not +// <id> dmac_runstdby_12 +#ifndef CONF_DMAC_RUNSTDBY_12 +#define CONF_DMAC_RUNSTDBY_12 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_12 +#ifndef CONF_DMAC_TRIGACT_12 +#define CONF_DMAC_TRIGACT_12 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_12 +#ifndef CONF_DMAC_TRIGSRC_12 +#define CONF_DMAC_TRIGSRC_12 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_12 +#ifndef CONF_DMAC_LVL_12 +#define CONF_DMAC_LVL_12 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_12 +#ifndef CONF_DMAC_EVOE_12 +#define CONF_DMAC_EVOE_12 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_12 +#ifndef CONF_DMAC_EVIE_12 +#define CONF_DMAC_EVIE_12 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_12 +#ifndef CONF_DMAC_EVACT_12 +#define CONF_DMAC_EVACT_12 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_12 +#ifndef CONF_DMAC_STEPSIZE_12 +#define CONF_DMAC_STEPSIZE_12 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_12 +#ifndef CONF_DMAC_STEPSEL_12 +#define CONF_DMAC_STEPSEL_12 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_12 +#ifndef CONF_DMAC_SRCINC_12 +#define CONF_DMAC_SRCINC_12 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_12 +#ifndef CONF_DMAC_DSTINC_12 +#define CONF_DMAC_DSTINC_12 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_12 +#ifndef CONF_DMAC_BEATSIZE_12 +#define CONF_DMAC_BEATSIZE_12 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_12 +#ifndef CONF_DMAC_BLOCKACT_12 +#define CONF_DMAC_BLOCKACT_12 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_12 +#ifndef CONF_DMAC_EVOSEL_12 +#define CONF_DMAC_EVOSEL_12 0 +#endif +// </e> + +// <e> Channel 13 settings +// <id> dmac_channel_13_settings +#ifndef CONF_DMAC_CHANNEL_13_SETTINGS +#define CONF_DMAC_CHANNEL_13_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 13 is running in standby mode or not +// <id> dmac_runstdby_13 +#ifndef CONF_DMAC_RUNSTDBY_13 +#define CONF_DMAC_RUNSTDBY_13 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_13 +#ifndef CONF_DMAC_TRIGACT_13 +#define CONF_DMAC_TRIGACT_13 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_13 +#ifndef CONF_DMAC_TRIGSRC_13 +#define CONF_DMAC_TRIGSRC_13 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_13 +#ifndef CONF_DMAC_LVL_13 +#define CONF_DMAC_LVL_13 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_13 +#ifndef CONF_DMAC_EVOE_13 +#define CONF_DMAC_EVOE_13 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_13 +#ifndef CONF_DMAC_EVIE_13 +#define CONF_DMAC_EVIE_13 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_13 +#ifndef CONF_DMAC_EVACT_13 +#define CONF_DMAC_EVACT_13 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_13 +#ifndef CONF_DMAC_STEPSIZE_13 +#define CONF_DMAC_STEPSIZE_13 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_13 +#ifndef CONF_DMAC_STEPSEL_13 +#define CONF_DMAC_STEPSEL_13 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_13 +#ifndef CONF_DMAC_SRCINC_13 +#define CONF_DMAC_SRCINC_13 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_13 +#ifndef CONF_DMAC_DSTINC_13 +#define CONF_DMAC_DSTINC_13 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_13 +#ifndef CONF_DMAC_BEATSIZE_13 +#define CONF_DMAC_BEATSIZE_13 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_13 +#ifndef CONF_DMAC_BLOCKACT_13 +#define CONF_DMAC_BLOCKACT_13 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_13 +#ifndef CONF_DMAC_EVOSEL_13 +#define CONF_DMAC_EVOSEL_13 0 +#endif +// </e> + +// <e> Channel 14 settings +// <id> dmac_channel_14_settings +#ifndef CONF_DMAC_CHANNEL_14_SETTINGS +#define CONF_DMAC_CHANNEL_14_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 14 is running in standby mode or not +// <id> dmac_runstdby_14 +#ifndef CONF_DMAC_RUNSTDBY_14 +#define CONF_DMAC_RUNSTDBY_14 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_14 +#ifndef CONF_DMAC_TRIGACT_14 +#define CONF_DMAC_TRIGACT_14 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_14 +#ifndef CONF_DMAC_TRIGSRC_14 +#define CONF_DMAC_TRIGSRC_14 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_14 +#ifndef CONF_DMAC_LVL_14 +#define CONF_DMAC_LVL_14 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_14 +#ifndef CONF_DMAC_EVOE_14 +#define CONF_DMAC_EVOE_14 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_14 +#ifndef CONF_DMAC_EVIE_14 +#define CONF_DMAC_EVIE_14 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_14 +#ifndef CONF_DMAC_EVACT_14 +#define CONF_DMAC_EVACT_14 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_14 +#ifndef CONF_DMAC_STEPSIZE_14 +#define CONF_DMAC_STEPSIZE_14 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_14 +#ifndef CONF_DMAC_STEPSEL_14 +#define CONF_DMAC_STEPSEL_14 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_14 +#ifndef CONF_DMAC_SRCINC_14 +#define CONF_DMAC_SRCINC_14 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_14 +#ifndef CONF_DMAC_DSTINC_14 +#define CONF_DMAC_DSTINC_14 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_14 +#ifndef CONF_DMAC_BEATSIZE_14 +#define CONF_DMAC_BEATSIZE_14 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_14 +#ifndef CONF_DMAC_BLOCKACT_14 +#define CONF_DMAC_BLOCKACT_14 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_14 +#ifndef CONF_DMAC_EVOSEL_14 +#define CONF_DMAC_EVOSEL_14 0 +#endif +// </e> + +// <e> Channel 15 settings +// <id> dmac_channel_15_settings +#ifndef CONF_DMAC_CHANNEL_15_SETTINGS +#define CONF_DMAC_CHANNEL_15_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 15 is running in standby mode or not +// <id> dmac_runstdby_15 +#ifndef CONF_DMAC_RUNSTDBY_15 +#define CONF_DMAC_RUNSTDBY_15 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_15 +#ifndef CONF_DMAC_TRIGACT_15 +#define CONF_DMAC_TRIGACT_15 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_15 +#ifndef CONF_DMAC_TRIGSRC_15 +#define CONF_DMAC_TRIGSRC_15 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_15 +#ifndef CONF_DMAC_LVL_15 +#define CONF_DMAC_LVL_15 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_15 +#ifndef CONF_DMAC_EVOE_15 +#define CONF_DMAC_EVOE_15 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_15 +#ifndef CONF_DMAC_EVIE_15 +#define CONF_DMAC_EVIE_15 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_15 +#ifndef CONF_DMAC_EVACT_15 +#define CONF_DMAC_EVACT_15 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_15 +#ifndef CONF_DMAC_STEPSIZE_15 +#define CONF_DMAC_STEPSIZE_15 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_15 +#ifndef CONF_DMAC_STEPSEL_15 +#define CONF_DMAC_STEPSEL_15 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_15 +#ifndef CONF_DMAC_SRCINC_15 +#define CONF_DMAC_SRCINC_15 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_15 +#ifndef CONF_DMAC_DSTINC_15 +#define CONF_DMAC_DSTINC_15 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_15 +#ifndef CONF_DMAC_BEATSIZE_15 +#define CONF_DMAC_BEATSIZE_15 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_15 +#ifndef CONF_DMAC_BLOCKACT_15 +#define CONF_DMAC_BLOCKACT_15 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_15 +#ifndef CONF_DMAC_EVOSEL_15 +#define CONF_DMAC_EVOSEL_15 0 +#endif +// </e> + +// <e> Channel 16 settings +// <id> dmac_channel_16_settings +#ifndef CONF_DMAC_CHANNEL_16_SETTINGS +#define CONF_DMAC_CHANNEL_16_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 16 is running in standby mode or not +// <id> dmac_runstdby_16 +#ifndef CONF_DMAC_RUNSTDBY_16 +#define CONF_DMAC_RUNSTDBY_16 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_16 +#ifndef CONF_DMAC_TRIGACT_16 +#define CONF_DMAC_TRIGACT_16 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_16 +#ifndef CONF_DMAC_TRIGSRC_16 +#define CONF_DMAC_TRIGSRC_16 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_16 +#ifndef CONF_DMAC_LVL_16 +#define CONF_DMAC_LVL_16 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_16 +#ifndef CONF_DMAC_EVOE_16 +#define CONF_DMAC_EVOE_16 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_16 +#ifndef CONF_DMAC_EVIE_16 +#define CONF_DMAC_EVIE_16 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_16 +#ifndef CONF_DMAC_EVACT_16 +#define CONF_DMAC_EVACT_16 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_16 +#ifndef CONF_DMAC_STEPSIZE_16 +#define CONF_DMAC_STEPSIZE_16 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_16 +#ifndef CONF_DMAC_STEPSEL_16 +#define CONF_DMAC_STEPSEL_16 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_16 +#ifndef CONF_DMAC_SRCINC_16 +#define CONF_DMAC_SRCINC_16 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_16 +#ifndef CONF_DMAC_DSTINC_16 +#define CONF_DMAC_DSTINC_16 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_16 +#ifndef CONF_DMAC_BEATSIZE_16 +#define CONF_DMAC_BEATSIZE_16 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_16 +#ifndef CONF_DMAC_BLOCKACT_16 +#define CONF_DMAC_BLOCKACT_16 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_16 +#ifndef CONF_DMAC_EVOSEL_16 +#define CONF_DMAC_EVOSEL_16 0 +#endif +// </e> + +// <e> Channel 17 settings +// <id> dmac_channel_17_settings +#ifndef CONF_DMAC_CHANNEL_17_SETTINGS +#define CONF_DMAC_CHANNEL_17_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 17 is running in standby mode or not +// <id> dmac_runstdby_17 +#ifndef CONF_DMAC_RUNSTDBY_17 +#define CONF_DMAC_RUNSTDBY_17 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_17 +#ifndef CONF_DMAC_TRIGACT_17 +#define CONF_DMAC_TRIGACT_17 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_17 +#ifndef CONF_DMAC_TRIGSRC_17 +#define CONF_DMAC_TRIGSRC_17 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_17 +#ifndef CONF_DMAC_LVL_17 +#define CONF_DMAC_LVL_17 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_17 +#ifndef CONF_DMAC_EVOE_17 +#define CONF_DMAC_EVOE_17 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_17 +#ifndef CONF_DMAC_EVIE_17 +#define CONF_DMAC_EVIE_17 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_17 +#ifndef CONF_DMAC_EVACT_17 +#define CONF_DMAC_EVACT_17 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_17 +#ifndef CONF_DMAC_STEPSIZE_17 +#define CONF_DMAC_STEPSIZE_17 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_17 +#ifndef CONF_DMAC_STEPSEL_17 +#define CONF_DMAC_STEPSEL_17 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_17 +#ifndef CONF_DMAC_SRCINC_17 +#define CONF_DMAC_SRCINC_17 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_17 +#ifndef CONF_DMAC_DSTINC_17 +#define CONF_DMAC_DSTINC_17 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_17 +#ifndef CONF_DMAC_BEATSIZE_17 +#define CONF_DMAC_BEATSIZE_17 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_17 +#ifndef CONF_DMAC_BLOCKACT_17 +#define CONF_DMAC_BLOCKACT_17 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_17 +#ifndef CONF_DMAC_EVOSEL_17 +#define CONF_DMAC_EVOSEL_17 0 +#endif +// </e> + +// <e> Channel 18 settings +// <id> dmac_channel_18_settings +#ifndef CONF_DMAC_CHANNEL_18_SETTINGS +#define CONF_DMAC_CHANNEL_18_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 18 is running in standby mode or not +// <id> dmac_runstdby_18 +#ifndef CONF_DMAC_RUNSTDBY_18 +#define CONF_DMAC_RUNSTDBY_18 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_18 +#ifndef CONF_DMAC_TRIGACT_18 +#define CONF_DMAC_TRIGACT_18 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_18 +#ifndef CONF_DMAC_TRIGSRC_18 +#define CONF_DMAC_TRIGSRC_18 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_18 +#ifndef CONF_DMAC_LVL_18 +#define CONF_DMAC_LVL_18 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_18 +#ifndef CONF_DMAC_EVOE_18 +#define CONF_DMAC_EVOE_18 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_18 +#ifndef CONF_DMAC_EVIE_18 +#define CONF_DMAC_EVIE_18 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_18 +#ifndef CONF_DMAC_EVACT_18 +#define CONF_DMAC_EVACT_18 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_18 +#ifndef CONF_DMAC_STEPSIZE_18 +#define CONF_DMAC_STEPSIZE_18 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_18 +#ifndef CONF_DMAC_STEPSEL_18 +#define CONF_DMAC_STEPSEL_18 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_18 +#ifndef CONF_DMAC_SRCINC_18 +#define CONF_DMAC_SRCINC_18 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_18 +#ifndef CONF_DMAC_DSTINC_18 +#define CONF_DMAC_DSTINC_18 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_18 +#ifndef CONF_DMAC_BEATSIZE_18 +#define CONF_DMAC_BEATSIZE_18 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_18 +#ifndef CONF_DMAC_BLOCKACT_18 +#define CONF_DMAC_BLOCKACT_18 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_18 +#ifndef CONF_DMAC_EVOSEL_18 +#define CONF_DMAC_EVOSEL_18 0 +#endif +// </e> + +// <e> Channel 19 settings +// <id> dmac_channel_19_settings +#ifndef CONF_DMAC_CHANNEL_19_SETTINGS +#define CONF_DMAC_CHANNEL_19_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 19 is running in standby mode or not +// <id> dmac_runstdby_19 +#ifndef CONF_DMAC_RUNSTDBY_19 +#define CONF_DMAC_RUNSTDBY_19 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_19 +#ifndef CONF_DMAC_TRIGACT_19 +#define CONF_DMAC_TRIGACT_19 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_19 +#ifndef CONF_DMAC_TRIGSRC_19 +#define CONF_DMAC_TRIGSRC_19 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_19 +#ifndef CONF_DMAC_LVL_19 +#define CONF_DMAC_LVL_19 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_19 +#ifndef CONF_DMAC_EVOE_19 +#define CONF_DMAC_EVOE_19 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_19 +#ifndef CONF_DMAC_EVIE_19 +#define CONF_DMAC_EVIE_19 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_19 +#ifndef CONF_DMAC_EVACT_19 +#define CONF_DMAC_EVACT_19 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_19 +#ifndef CONF_DMAC_STEPSIZE_19 +#define CONF_DMAC_STEPSIZE_19 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_19 +#ifndef CONF_DMAC_STEPSEL_19 +#define CONF_DMAC_STEPSEL_19 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_19 +#ifndef CONF_DMAC_SRCINC_19 +#define CONF_DMAC_SRCINC_19 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_19 +#ifndef CONF_DMAC_DSTINC_19 +#define CONF_DMAC_DSTINC_19 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_19 +#ifndef CONF_DMAC_BEATSIZE_19 +#define CONF_DMAC_BEATSIZE_19 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_19 +#ifndef CONF_DMAC_BLOCKACT_19 +#define CONF_DMAC_BLOCKACT_19 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_19 +#ifndef CONF_DMAC_EVOSEL_19 +#define CONF_DMAC_EVOSEL_19 0 +#endif +// </e> + +// <e> Channel 20 settings +// <id> dmac_channel_20_settings +#ifndef CONF_DMAC_CHANNEL_20_SETTINGS +#define CONF_DMAC_CHANNEL_20_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 20 is running in standby mode or not +// <id> dmac_runstdby_20 +#ifndef CONF_DMAC_RUNSTDBY_20 +#define CONF_DMAC_RUNSTDBY_20 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_20 +#ifndef CONF_DMAC_TRIGACT_20 +#define CONF_DMAC_TRIGACT_20 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_20 +#ifndef CONF_DMAC_TRIGSRC_20 +#define CONF_DMAC_TRIGSRC_20 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_20 +#ifndef CONF_DMAC_LVL_20 +#define CONF_DMAC_LVL_20 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_20 +#ifndef CONF_DMAC_EVOE_20 +#define CONF_DMAC_EVOE_20 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_20 +#ifndef CONF_DMAC_EVIE_20 +#define CONF_DMAC_EVIE_20 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_20 +#ifndef CONF_DMAC_EVACT_20 +#define CONF_DMAC_EVACT_20 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_20 +#ifndef CONF_DMAC_STEPSIZE_20 +#define CONF_DMAC_STEPSIZE_20 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_20 +#ifndef CONF_DMAC_STEPSEL_20 +#define CONF_DMAC_STEPSEL_20 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_20 +#ifndef CONF_DMAC_SRCINC_20 +#define CONF_DMAC_SRCINC_20 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_20 +#ifndef CONF_DMAC_DSTINC_20 +#define CONF_DMAC_DSTINC_20 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_20 +#ifndef CONF_DMAC_BEATSIZE_20 +#define CONF_DMAC_BEATSIZE_20 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_20 +#ifndef CONF_DMAC_BLOCKACT_20 +#define CONF_DMAC_BLOCKACT_20 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_20 +#ifndef CONF_DMAC_EVOSEL_20 +#define CONF_DMAC_EVOSEL_20 0 +#endif +// </e> + +// <e> Channel 21 settings +// <id> dmac_channel_21_settings +#ifndef CONF_DMAC_CHANNEL_21_SETTINGS +#define CONF_DMAC_CHANNEL_21_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 21 is running in standby mode or not +// <id> dmac_runstdby_21 +#ifndef CONF_DMAC_RUNSTDBY_21 +#define CONF_DMAC_RUNSTDBY_21 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_21 +#ifndef CONF_DMAC_TRIGACT_21 +#define CONF_DMAC_TRIGACT_21 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_21 +#ifndef CONF_DMAC_TRIGSRC_21 +#define CONF_DMAC_TRIGSRC_21 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_21 +#ifndef CONF_DMAC_LVL_21 +#define CONF_DMAC_LVL_21 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_21 +#ifndef CONF_DMAC_EVOE_21 +#define CONF_DMAC_EVOE_21 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_21 +#ifndef CONF_DMAC_EVIE_21 +#define CONF_DMAC_EVIE_21 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_21 +#ifndef CONF_DMAC_EVACT_21 +#define CONF_DMAC_EVACT_21 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_21 +#ifndef CONF_DMAC_STEPSIZE_21 +#define CONF_DMAC_STEPSIZE_21 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_21 +#ifndef CONF_DMAC_STEPSEL_21 +#define CONF_DMAC_STEPSEL_21 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_21 +#ifndef CONF_DMAC_SRCINC_21 +#define CONF_DMAC_SRCINC_21 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_21 +#ifndef CONF_DMAC_DSTINC_21 +#define CONF_DMAC_DSTINC_21 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_21 +#ifndef CONF_DMAC_BEATSIZE_21 +#define CONF_DMAC_BEATSIZE_21 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_21 +#ifndef CONF_DMAC_BLOCKACT_21 +#define CONF_DMAC_BLOCKACT_21 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_21 +#ifndef CONF_DMAC_EVOSEL_21 +#define CONF_DMAC_EVOSEL_21 0 +#endif +// </e> + +// <e> Channel 22 settings +// <id> dmac_channel_22_settings +#ifndef CONF_DMAC_CHANNEL_22_SETTINGS +#define CONF_DMAC_CHANNEL_22_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 22 is running in standby mode or not +// <id> dmac_runstdby_22 +#ifndef CONF_DMAC_RUNSTDBY_22 +#define CONF_DMAC_RUNSTDBY_22 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_22 +#ifndef CONF_DMAC_TRIGACT_22 +#define CONF_DMAC_TRIGACT_22 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_22 +#ifndef CONF_DMAC_TRIGSRC_22 +#define CONF_DMAC_TRIGSRC_22 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_22 +#ifndef CONF_DMAC_LVL_22 +#define CONF_DMAC_LVL_22 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_22 +#ifndef CONF_DMAC_EVOE_22 +#define CONF_DMAC_EVOE_22 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_22 +#ifndef CONF_DMAC_EVIE_22 +#define CONF_DMAC_EVIE_22 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_22 +#ifndef CONF_DMAC_EVACT_22 +#define CONF_DMAC_EVACT_22 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_22 +#ifndef CONF_DMAC_STEPSIZE_22 +#define CONF_DMAC_STEPSIZE_22 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_22 +#ifndef CONF_DMAC_STEPSEL_22 +#define CONF_DMAC_STEPSEL_22 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_22 +#ifndef CONF_DMAC_SRCINC_22 +#define CONF_DMAC_SRCINC_22 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_22 +#ifndef CONF_DMAC_DSTINC_22 +#define CONF_DMAC_DSTINC_22 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_22 +#ifndef CONF_DMAC_BEATSIZE_22 +#define CONF_DMAC_BEATSIZE_22 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_22 +#ifndef CONF_DMAC_BLOCKACT_22 +#define CONF_DMAC_BLOCKACT_22 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_22 +#ifndef CONF_DMAC_EVOSEL_22 +#define CONF_DMAC_EVOSEL_22 0 +#endif +// </e> + +// <e> Channel 23 settings +// <id> dmac_channel_23_settings +#ifndef CONF_DMAC_CHANNEL_23_SETTINGS +#define CONF_DMAC_CHANNEL_23_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 23 is running in standby mode or not +// <id> dmac_runstdby_23 +#ifndef CONF_DMAC_RUNSTDBY_23 +#define CONF_DMAC_RUNSTDBY_23 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_23 +#ifndef CONF_DMAC_TRIGACT_23 +#define CONF_DMAC_TRIGACT_23 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_23 +#ifndef CONF_DMAC_TRIGSRC_23 +#define CONF_DMAC_TRIGSRC_23 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_23 +#ifndef CONF_DMAC_LVL_23 +#define CONF_DMAC_LVL_23 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_23 +#ifndef CONF_DMAC_EVOE_23 +#define CONF_DMAC_EVOE_23 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_23 +#ifndef CONF_DMAC_EVIE_23 +#define CONF_DMAC_EVIE_23 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_23 +#ifndef CONF_DMAC_EVACT_23 +#define CONF_DMAC_EVACT_23 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_23 +#ifndef CONF_DMAC_STEPSIZE_23 +#define CONF_DMAC_STEPSIZE_23 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_23 +#ifndef CONF_DMAC_STEPSEL_23 +#define CONF_DMAC_STEPSEL_23 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_23 +#ifndef CONF_DMAC_SRCINC_23 +#define CONF_DMAC_SRCINC_23 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_23 +#ifndef CONF_DMAC_DSTINC_23 +#define CONF_DMAC_DSTINC_23 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_23 +#ifndef CONF_DMAC_BEATSIZE_23 +#define CONF_DMAC_BEATSIZE_23 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_23 +#ifndef CONF_DMAC_BLOCKACT_23 +#define CONF_DMAC_BLOCKACT_23 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_23 +#ifndef CONF_DMAC_EVOSEL_23 +#define CONF_DMAC_EVOSEL_23 0 +#endif +// </e> + +// <e> Channel 24 settings +// <id> dmac_channel_24_settings +#ifndef CONF_DMAC_CHANNEL_24_SETTINGS +#define CONF_DMAC_CHANNEL_24_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 24 is running in standby mode or not +// <id> dmac_runstdby_24 +#ifndef CONF_DMAC_RUNSTDBY_24 +#define CONF_DMAC_RUNSTDBY_24 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_24 +#ifndef CONF_DMAC_TRIGACT_24 +#define CONF_DMAC_TRIGACT_24 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_24 +#ifndef CONF_DMAC_TRIGSRC_24 +#define CONF_DMAC_TRIGSRC_24 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_24 +#ifndef CONF_DMAC_LVL_24 +#define CONF_DMAC_LVL_24 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_24 +#ifndef CONF_DMAC_EVOE_24 +#define CONF_DMAC_EVOE_24 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_24 +#ifndef CONF_DMAC_EVIE_24 +#define CONF_DMAC_EVIE_24 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_24 +#ifndef CONF_DMAC_EVACT_24 +#define CONF_DMAC_EVACT_24 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_24 +#ifndef CONF_DMAC_STEPSIZE_24 +#define CONF_DMAC_STEPSIZE_24 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_24 +#ifndef CONF_DMAC_STEPSEL_24 +#define CONF_DMAC_STEPSEL_24 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_24 +#ifndef CONF_DMAC_SRCINC_24 +#define CONF_DMAC_SRCINC_24 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_24 +#ifndef CONF_DMAC_DSTINC_24 +#define CONF_DMAC_DSTINC_24 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_24 +#ifndef CONF_DMAC_BEATSIZE_24 +#define CONF_DMAC_BEATSIZE_24 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_24 +#ifndef CONF_DMAC_BLOCKACT_24 +#define CONF_DMAC_BLOCKACT_24 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_24 +#ifndef CONF_DMAC_EVOSEL_24 +#define CONF_DMAC_EVOSEL_24 0 +#endif +// </e> + +// <e> Channel 25 settings +// <id> dmac_channel_25_settings +#ifndef CONF_DMAC_CHANNEL_25_SETTINGS +#define CONF_DMAC_CHANNEL_25_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 25 is running in standby mode or not +// <id> dmac_runstdby_25 +#ifndef CONF_DMAC_RUNSTDBY_25 +#define CONF_DMAC_RUNSTDBY_25 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_25 +#ifndef CONF_DMAC_TRIGACT_25 +#define CONF_DMAC_TRIGACT_25 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_25 +#ifndef CONF_DMAC_TRIGSRC_25 +#define CONF_DMAC_TRIGSRC_25 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_25 +#ifndef CONF_DMAC_LVL_25 +#define CONF_DMAC_LVL_25 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_25 +#ifndef CONF_DMAC_EVOE_25 +#define CONF_DMAC_EVOE_25 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_25 +#ifndef CONF_DMAC_EVIE_25 +#define CONF_DMAC_EVIE_25 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_25 +#ifndef CONF_DMAC_EVACT_25 +#define CONF_DMAC_EVACT_25 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_25 +#ifndef CONF_DMAC_STEPSIZE_25 +#define CONF_DMAC_STEPSIZE_25 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_25 +#ifndef CONF_DMAC_STEPSEL_25 +#define CONF_DMAC_STEPSEL_25 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_25 +#ifndef CONF_DMAC_SRCINC_25 +#define CONF_DMAC_SRCINC_25 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_25 +#ifndef CONF_DMAC_DSTINC_25 +#define CONF_DMAC_DSTINC_25 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_25 +#ifndef CONF_DMAC_BEATSIZE_25 +#define CONF_DMAC_BEATSIZE_25 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_25 +#ifndef CONF_DMAC_BLOCKACT_25 +#define CONF_DMAC_BLOCKACT_25 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_25 +#ifndef CONF_DMAC_EVOSEL_25 +#define CONF_DMAC_EVOSEL_25 0 +#endif +// </e> + +// <e> Channel 26 settings +// <id> dmac_channel_26_settings +#ifndef CONF_DMAC_CHANNEL_26_SETTINGS +#define CONF_DMAC_CHANNEL_26_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 26 is running in standby mode or not +// <id> dmac_runstdby_26 +#ifndef CONF_DMAC_RUNSTDBY_26 +#define CONF_DMAC_RUNSTDBY_26 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_26 +#ifndef CONF_DMAC_TRIGACT_26 +#define CONF_DMAC_TRIGACT_26 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_26 +#ifndef CONF_DMAC_TRIGSRC_26 +#define CONF_DMAC_TRIGSRC_26 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_26 +#ifndef CONF_DMAC_LVL_26 +#define CONF_DMAC_LVL_26 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_26 +#ifndef CONF_DMAC_EVOE_26 +#define CONF_DMAC_EVOE_26 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_26 +#ifndef CONF_DMAC_EVIE_26 +#define CONF_DMAC_EVIE_26 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_26 +#ifndef CONF_DMAC_EVACT_26 +#define CONF_DMAC_EVACT_26 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_26 +#ifndef CONF_DMAC_STEPSIZE_26 +#define CONF_DMAC_STEPSIZE_26 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_26 +#ifndef CONF_DMAC_STEPSEL_26 +#define CONF_DMAC_STEPSEL_26 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_26 +#ifndef CONF_DMAC_SRCINC_26 +#define CONF_DMAC_SRCINC_26 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_26 +#ifndef CONF_DMAC_DSTINC_26 +#define CONF_DMAC_DSTINC_26 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_26 +#ifndef CONF_DMAC_BEATSIZE_26 +#define CONF_DMAC_BEATSIZE_26 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_26 +#ifndef CONF_DMAC_BLOCKACT_26 +#define CONF_DMAC_BLOCKACT_26 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_26 +#ifndef CONF_DMAC_EVOSEL_26 +#define CONF_DMAC_EVOSEL_26 0 +#endif +// </e> + +// <e> Channel 27 settings +// <id> dmac_channel_27_settings +#ifndef CONF_DMAC_CHANNEL_27_SETTINGS +#define CONF_DMAC_CHANNEL_27_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 27 is running in standby mode or not +// <id> dmac_runstdby_27 +#ifndef CONF_DMAC_RUNSTDBY_27 +#define CONF_DMAC_RUNSTDBY_27 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_27 +#ifndef CONF_DMAC_TRIGACT_27 +#define CONF_DMAC_TRIGACT_27 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_27 +#ifndef CONF_DMAC_TRIGSRC_27 +#define CONF_DMAC_TRIGSRC_27 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_27 +#ifndef CONF_DMAC_LVL_27 +#define CONF_DMAC_LVL_27 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_27 +#ifndef CONF_DMAC_EVOE_27 +#define CONF_DMAC_EVOE_27 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_27 +#ifndef CONF_DMAC_EVIE_27 +#define CONF_DMAC_EVIE_27 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_27 +#ifndef CONF_DMAC_EVACT_27 +#define CONF_DMAC_EVACT_27 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_27 +#ifndef CONF_DMAC_STEPSIZE_27 +#define CONF_DMAC_STEPSIZE_27 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_27 +#ifndef CONF_DMAC_STEPSEL_27 +#define CONF_DMAC_STEPSEL_27 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_27 +#ifndef CONF_DMAC_SRCINC_27 +#define CONF_DMAC_SRCINC_27 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_27 +#ifndef CONF_DMAC_DSTINC_27 +#define CONF_DMAC_DSTINC_27 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_27 +#ifndef CONF_DMAC_BEATSIZE_27 +#define CONF_DMAC_BEATSIZE_27 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_27 +#ifndef CONF_DMAC_BLOCKACT_27 +#define CONF_DMAC_BLOCKACT_27 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_27 +#ifndef CONF_DMAC_EVOSEL_27 +#define CONF_DMAC_EVOSEL_27 0 +#endif +// </e> + +// <e> Channel 28 settings +// <id> dmac_channel_28_settings +#ifndef CONF_DMAC_CHANNEL_28_SETTINGS +#define CONF_DMAC_CHANNEL_28_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 28 is running in standby mode or not +// <id> dmac_runstdby_28 +#ifndef CONF_DMAC_RUNSTDBY_28 +#define CONF_DMAC_RUNSTDBY_28 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_28 +#ifndef CONF_DMAC_TRIGACT_28 +#define CONF_DMAC_TRIGACT_28 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_28 +#ifndef CONF_DMAC_TRIGSRC_28 +#define CONF_DMAC_TRIGSRC_28 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_28 +#ifndef CONF_DMAC_LVL_28 +#define CONF_DMAC_LVL_28 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_28 +#ifndef CONF_DMAC_EVOE_28 +#define CONF_DMAC_EVOE_28 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_28 +#ifndef CONF_DMAC_EVIE_28 +#define CONF_DMAC_EVIE_28 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_28 +#ifndef CONF_DMAC_EVACT_28 +#define CONF_DMAC_EVACT_28 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_28 +#ifndef CONF_DMAC_STEPSIZE_28 +#define CONF_DMAC_STEPSIZE_28 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_28 +#ifndef CONF_DMAC_STEPSEL_28 +#define CONF_DMAC_STEPSEL_28 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_28 +#ifndef CONF_DMAC_SRCINC_28 +#define CONF_DMAC_SRCINC_28 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_28 +#ifndef CONF_DMAC_DSTINC_28 +#define CONF_DMAC_DSTINC_28 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_28 +#ifndef CONF_DMAC_BEATSIZE_28 +#define CONF_DMAC_BEATSIZE_28 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_28 +#ifndef CONF_DMAC_BLOCKACT_28 +#define CONF_DMAC_BLOCKACT_28 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_28 +#ifndef CONF_DMAC_EVOSEL_28 +#define CONF_DMAC_EVOSEL_28 0 +#endif +// </e> + +// <e> Channel 29 settings +// <id> dmac_channel_29_settings +#ifndef CONF_DMAC_CHANNEL_29_SETTINGS +#define CONF_DMAC_CHANNEL_29_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 29 is running in standby mode or not +// <id> dmac_runstdby_29 +#ifndef CONF_DMAC_RUNSTDBY_29 +#define CONF_DMAC_RUNSTDBY_29 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_29 +#ifndef CONF_DMAC_TRIGACT_29 +#define CONF_DMAC_TRIGACT_29 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_29 +#ifndef CONF_DMAC_TRIGSRC_29 +#define CONF_DMAC_TRIGSRC_29 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_29 +#ifndef CONF_DMAC_LVL_29 +#define CONF_DMAC_LVL_29 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_29 +#ifndef CONF_DMAC_EVOE_29 +#define CONF_DMAC_EVOE_29 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_29 +#ifndef CONF_DMAC_EVIE_29 +#define CONF_DMAC_EVIE_29 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_29 +#ifndef CONF_DMAC_EVACT_29 +#define CONF_DMAC_EVACT_29 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_29 +#ifndef CONF_DMAC_STEPSIZE_29 +#define CONF_DMAC_STEPSIZE_29 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_29 +#ifndef CONF_DMAC_STEPSEL_29 +#define CONF_DMAC_STEPSEL_29 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_29 +#ifndef CONF_DMAC_SRCINC_29 +#define CONF_DMAC_SRCINC_29 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_29 +#ifndef CONF_DMAC_DSTINC_29 +#define CONF_DMAC_DSTINC_29 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_29 +#ifndef CONF_DMAC_BEATSIZE_29 +#define CONF_DMAC_BEATSIZE_29 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_29 +#ifndef CONF_DMAC_BLOCKACT_29 +#define CONF_DMAC_BLOCKACT_29 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_29 +#ifndef CONF_DMAC_EVOSEL_29 +#define CONF_DMAC_EVOSEL_29 0 +#endif +// </e> + +// <e> Channel 30 settings +// <id> dmac_channel_30_settings +#ifndef CONF_DMAC_CHANNEL_30_SETTINGS +#define CONF_DMAC_CHANNEL_30_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 30 is running in standby mode or not +// <id> dmac_runstdby_30 +#ifndef CONF_DMAC_RUNSTDBY_30 +#define CONF_DMAC_RUNSTDBY_30 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_30 +#ifndef CONF_DMAC_TRIGACT_30 +#define CONF_DMAC_TRIGACT_30 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_30 +#ifndef CONF_DMAC_TRIGSRC_30 +#define CONF_DMAC_TRIGSRC_30 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_30 +#ifndef CONF_DMAC_LVL_30 +#define CONF_DMAC_LVL_30 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_30 +#ifndef CONF_DMAC_EVOE_30 +#define CONF_DMAC_EVOE_30 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_30 +#ifndef CONF_DMAC_EVIE_30 +#define CONF_DMAC_EVIE_30 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_30 +#ifndef CONF_DMAC_EVACT_30 +#define CONF_DMAC_EVACT_30 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_30 +#ifndef CONF_DMAC_STEPSIZE_30 +#define CONF_DMAC_STEPSIZE_30 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_30 +#ifndef CONF_DMAC_STEPSEL_30 +#define CONF_DMAC_STEPSEL_30 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_30 +#ifndef CONF_DMAC_SRCINC_30 +#define CONF_DMAC_SRCINC_30 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_30 +#ifndef CONF_DMAC_DSTINC_30 +#define CONF_DMAC_DSTINC_30 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_30 +#ifndef CONF_DMAC_BEATSIZE_30 +#define CONF_DMAC_BEATSIZE_30 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_30 +#ifndef CONF_DMAC_BLOCKACT_30 +#define CONF_DMAC_BLOCKACT_30 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_30 +#ifndef CONF_DMAC_EVOSEL_30 +#define CONF_DMAC_EVOSEL_30 0 +#endif +// </e> + +// <e> Channel 31 settings +// <id> dmac_channel_31_settings +#ifndef CONF_DMAC_CHANNEL_31_SETTINGS +#define CONF_DMAC_CHANNEL_31_SETTINGS 0 +#endif + +// <q> Channel Run in Standby +// <i> Indicates whether channel 31 is running in standby mode or not +// <id> dmac_runstdby_31 +#ifndef CONF_DMAC_RUNSTDBY_31 +#define CONF_DMAC_RUNSTDBY_31 0 +#endif + +// <o> Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// <i> Defines the trigger action used for a transfer +// <id> dmac_trigact_31 +#ifndef CONF_DMAC_TRIGACT_31 +#define CONF_DMAC_TRIGACT_31 0 +#endif + +// <o> Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Time Stamp Trigger +// <0x02=> DSU Debug Communication Channel 0 Trigger +// <0x03=> DSU Debug Communication Channel 1 Trigger +// <0x04=> SERCOM0 RX Trigger +// <0x05=> SERCOM0 TX Trigger +// <0x06=> SERCOM1 RX Trigger +// <0x07=> SERCOM1 TX Trigger +// <0x08=> SERCOM2 RX Trigger +// <0x09=> SERCOM2 TX Trigger +// <0x0A=> SERCOM3 RX Trigger +// <0x0B=> SERCOM3 TX Trigger +// <0x0C=> SERCOM4 RX Trigger +// <0x0D=> SERCOM4 TX Trigger +// <0x0E=> SERCOM5 RX Trigger +// <0x0F=> SERCOM5 TX Trigger +// <0x10=> SERCOM6 RX Trigger +// <0x11=> SERCOM6 TX Trigger +// <0x12=> SERCOM7 RX Trigger +// <0x13=> SERCOM7 TX Trigger +// <0x14=> CAN0 DEBUG Trigger +// <0x15=> CAN1 DEBUG Trigger +// <0x16=> TCC0 Overflow Trigger Trigger +// <0x17=> TCC0 Match/Compare 0 Trigger Trigger +// <0x18=> TCC0 Match/Compare 1 Trigger Trigger +// <0x19=> TCC0 Match/Compare 2 Trigger Trigger +// <0x1A=> TCC0 Match/Compare 3 Trigger Trigger +// <0x1B=> TCC0 Match/Compare 4 Trigger Trigger +// <0x1C=> TCC0 Match/Compare 5 Trigger Trigger +// <0x1D=> TCC1 Overflow Trigger Trigger +// <0x1E=> TCC1 Match/Compare 0 Trigger Trigger +// <0x1F=> TCC1 Match/Compare 1 Trigger Trigger +// <0x20=> TCC1 Match/Compare 2 Trigger Trigger +// <0x21=> TCC1 Match/Compare 3 Trigger Trigger +// <0x22=> TCC2 Overflow Trigger Trigger +// <0x23=> TCC2 Match/Compare 0 Trigger Trigger +// <0x24=> TCC2 Match/Compare 1 Trigger Trigger +// <0x25=> TCC2 Match/Compare 2 Trigger Trigger +// <0x26=> TCC3 Overflow Trigger Trigger +// <0x27=> TCC3 Match/Compare 0 Trigger Trigger +// <0x28=> TCC3 Match/Compare 1 Trigger Trigger +// <0x29=> TCC4 Overflow Trigger Trigger +// <0x2A=> TCC4 Match/Compare 0 Trigger Trigger +// <0x2B=> TCC4 Match/Compare 1 Trigger Trigger +// <0x2C=> TC0 Overflow Trigger +// <0x2D=> TC0 Match/Compare 0 Trigger +// <0x2E=> TC0 Match/Compare 1 Trigger +// <0x2F=> TC1 Overflow Trigger +// <0x30=> TC1 Match/Compare 0 Trigger +// <0x31=> TC1 Match/Compare 1 Trigger +// <0x32=> TC2 Overflow Trigger +// <0x33=> TC2 Match/Compare 0 Trigger +// <0x34=> TC2 Match/Compare 1 Trigger +// <0x35=> TC3 Overflow Trigger +// <0x36=> TC3 Match/Compare 0 Trigger +// <0x37=> TC3 Match/Compare 1 Trigger +// <0x38=> TC4 Overflow Trigger +// <0x39=> TC4 Match/Compare 0 Trigger +// <0x3A=> TC4 Match/Compare 1 Trigger +// <0x3B=> TC5 Overflow Trigger +// <0x3C=> TC5 Match/Compare 0 Trigger +// <0x3D=> TC5 Match/Compare 1 Trigger +// <0x3E=> TC6 Overflow Trigger +// <0x3F=> TC6 Match/Compare 0 Trigger +// <0x40=> TC6 Match/Compare 1 Trigger +// <0x41=> TC7 Overflow Trigger +// <0x42=> TC7 Match/Compare 0 Trigger +// <0x43=> TC7 Match/Compare 1 Trigger +// <0x44=> ADC0 Result Ready Trigger +// <0x45=> ADC0 Sequencing Trigger +// <0x46=> ADC1 Result Ready Trigger +// <0x47=> ADC1 Sequencing Trigger +// <0x48=> DAC Empty 0 Trigger +// <0x49=> DAC Empty 1 Trigger +// <0x4A=> DAC Result Ready 0 Trigger +// <0x4B=> DAC Result Ready 1 Trigger +// <0x4C=> I2S Rx 0 Trigger +// <0x4D=> I2S Rx 1 Trigger +// <0x4E=> I2S Tx 0 Trigger +// <0x4F=> I2S Tx 1 Trigger +// <0x50=> PCC RX Trigger +// <0x51=> AES Write Trigger +// <0x52=> AES Read Trigger +// <0x53=> QSPI Rx Trigger +// <0x54=> QSPI Tx Trigger +// <i> Defines the peripheral trigger which is source of the transfer +// <id> dmac_trifsrc_31 +#ifndef CONF_DMAC_TRIGSRC_31 +#define CONF_DMAC_TRIGSRC_31 0 +#endif + +// <o> Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// <i> Defines the arbitration level for this channel +// <id> dmac_lvl_31 +#ifndef CONF_DMAC_LVL_31 +#define CONF_DMAC_LVL_31 0 +#endif + +// <q> Channel Event Output +// <i> Indicates whether channel event generation is enabled or not +// <id> dmac_evoe_31 +#ifndef CONF_DMAC_EVOE_31 +#define CONF_DMAC_EVOE_31 0 +#endif + +// <q> Channel Event Input +// <i> Indicates whether channel event reception is enabled or not +// <id> dmac_evie_31 +#ifndef CONF_DMAC_EVIE_31 +#define CONF_DMAC_EVIE_31 0 +#endif + +// <o> Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// <i> Defines the event input action +// <id> dmac_evact_31 +#ifndef CONF_DMAC_EVACT_31 +#define CONF_DMAC_EVACT_31 0 +#endif + +// <o> Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// <i> Defines the address increment step size, applies to source or destination address +// <id> dmac_stepsize_31 +#ifndef CONF_DMAC_STEPSIZE_31 +#define CONF_DMAC_STEPSIZE_31 0 +#endif + +// <o> Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// <i> Defines whether source or destination addresses are using the step size settings +// <id> dmac_stepsel_31 +#ifndef CONF_DMAC_STEPSEL_31 +#define CONF_DMAC_STEPSEL_31 0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incrementation is enabled or not +// <id> dmac_srcinc_31 +#ifndef CONF_DMAC_SRCINC_31 +#define CONF_DMAC_SRCINC_31 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incrementation is enabled or not +// <id> dmac_dstinc_31 +#ifndef CONF_DMAC_DSTINC_31 +#define CONF_DMAC_DSTINC_31 0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_31 +#ifndef CONF_DMAC_BEATSIZE_31 +#define CONF_DMAC_BEATSIZE_31 0 +#endif + +// <o> Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// <i> Defines the the DMAC should take after a block transfer has completed +// <id> dmac_blockact_31 +#ifndef CONF_DMAC_BLOCKACT_31 +#define CONF_DMAC_BLOCKACT_31 0 +#endif + +// <o> Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// <i> Defines the event output selection +// <id> dmac_evosel_31 +#ifndef CONF_DMAC_EVOSEL_31 +#define CONF_DMAC_EVOSEL_31 0 +#endif +// </e> + +// </e> + +// <<< end of configuration section >>> + +#endif // HPL_DMAC_CONFIG_H diff --git a/config/hpl_gclk_config.h b/config/hpl_gclk_config.h new file mode 100644 index 0000000..306d90e --- /dev/null +++ b/config/hpl_gclk_config.h @@ -0,0 +1,920 @@ +/* Auto-generated config file hpl_gclk_config.h */ +#ifndef HPL_GCLK_CONFIG_H +#define HPL_GCLK_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// <e> Generic clock generator 0 configuration +// <i> Indicates whether generic clock 0 configuration is enabled or not +// <id> enable_gclk_gen_0 +#ifndef CONF_GCLK_GENERATOR_0_CONFIG +#define CONF_GCLK_GENERATOR_0_CONFIG 1 +#endif + +// <h> Generic Clock Generator Control +// <y> Generic clock generator 0 source +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_GENCTRL_SRC_GCLKIN"> Generic clock generator input pad +// <GCLK_GENCTRL_SRC_GCLKGEN1"> Generic clock generator 1 +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_DFLL"> Digital Frequency Locked Loop (DFLL48M) +// <GCLK_GENCTRL_SRC_DPLL0"> Digital Phase Locked Loop (DPLL0) +// <GCLK_GENCTRL_SRC_DPLL1"> Digital Phase Locked Loop (DPLL1) +// <i> This defines the clock source for generic clock generator 0 +// <id> gclk_gen_0_oscillator +#ifndef CONF_GCLK_GEN_0_SOURCE +#define CONF_GCLK_GEN_0_SOURCE GCLK_GENCTRL_SRC_XOSC1 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> gclk_arch_gen_0_runstdby +#ifndef CONF_GCLK_GEN_0_RUNSTDBY +#define CONF_GCLK_GEN_0_RUNSTDBY 0 +#endif + +// <q> Divide Selection +// <i> Indicates whether Divide Selection is enabled or not +//<id> gclk_gen_0_div_sel +#ifndef CONF_GCLK_GEN_0_DIVSEL +#define CONF_GCLK_GEN_0_DIVSEL 0 +#endif + +// <q> Output Enable +// <i> Indicates whether Output Enable is enabled or not +// <id> gclk_arch_gen_0_oe +#ifndef CONF_GCLK_GEN_0_OE +#define CONF_GCLK_GEN_0_OE 0 +#endif + +// <q> Output Off Value +// <i> Indicates whether Output Off Value is enabled or not +// <id> gclk_arch_gen_0_oov +#ifndef CONF_GCLK_GEN_0_OOV +#define CONF_GCLK_GEN_0_OOV 0 +#endif + +// <q> Improve Duty Cycle +// <i> Indicates whether Improve Duty Cycle is enabled or not +// <id> gclk_arch_gen_0_idc +#ifndef CONF_GCLK_GEN_0_IDC +#define CONF_GCLK_GEN_0_IDC 0 +#endif + +// <q> Generic Clock Generator Enable +// <i> Indicates whether Generic Clock Generator Enable is enabled or not +// <id> gclk_arch_gen_0_enable +#ifndef CONF_GCLK_GEN_0_GENEN +#define CONF_GCLK_GEN_0_GENEN 1 +#endif +// </h> + +//<h> Generic Clock Generator Division +//<o> Generic clock generator 0 division <0x0000-0xFFFF> +// <id> gclk_gen_0_div +#ifndef CONF_GCLK_GEN_0_DIV +#define CONF_GCLK_GEN_0_DIV 1 +#endif +// </h> +// </e> + +// <e> Generic clock generator 1 configuration +// <i> Indicates whether generic clock 1 configuration is enabled or not +// <id> enable_gclk_gen_1 +#ifndef CONF_GCLK_GENERATOR_1_CONFIG +#define CONF_GCLK_GENERATOR_1_CONFIG 1 +#endif + +// <h> Generic Clock Generator Control +// <y> Generic clock generator 1 source +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_GENCTRL_SRC_GCLKIN"> Generic clock generator input pad +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_DFLL"> Digital Frequency Locked Loop (DFLL48M) +// <GCLK_GENCTRL_SRC_DPLL0"> Digital Phase Locked Loop (DPLL0) +// <GCLK_GENCTRL_SRC_DPLL1"> Digital Phase Locked Loop (DPLL1) +// <i> This defines the clock source for generic clock generator 1 +// <id> gclk_gen_1_oscillator +#ifndef CONF_GCLK_GEN_1_SOURCE +#define CONF_GCLK_GEN_1_SOURCE GCLK_GENCTRL_SRC_DFLL +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> gclk_arch_gen_1_runstdby +#ifndef CONF_GCLK_GEN_1_RUNSTDBY +#define CONF_GCLK_GEN_1_RUNSTDBY 0 +#endif + +// <q> Divide Selection +// <i> Indicates whether Divide Selection is enabled or not +//<id> gclk_gen_1_div_sel +#ifndef CONF_GCLK_GEN_1_DIVSEL +#define CONF_GCLK_GEN_1_DIVSEL 0 +#endif + +// <q> Output Enable +// <i> Indicates whether Output Enable is enabled or not +// <id> gclk_arch_gen_1_oe +#ifndef CONF_GCLK_GEN_1_OE +#define CONF_GCLK_GEN_1_OE 0 +#endif + +// <q> Output Off Value +// <i> Indicates whether Output Off Value is enabled or not +// <id> gclk_arch_gen_1_oov +#ifndef CONF_GCLK_GEN_1_OOV +#define CONF_GCLK_GEN_1_OOV 0 +#endif + +// <q> Improve Duty Cycle +// <i> Indicates whether Improve Duty Cycle is enabled or not +// <id> gclk_arch_gen_1_idc +#ifndef CONF_GCLK_GEN_1_IDC +#define CONF_GCLK_GEN_1_IDC 0 +#endif + +// <q> Generic Clock Generator Enable +// <i> Indicates whether Generic Clock Generator Enable is enabled or not +// <id> gclk_arch_gen_1_enable +#ifndef CONF_GCLK_GEN_1_GENEN +#define CONF_GCLK_GEN_1_GENEN 1 +#endif +// </h> + +//<h> Generic Clock Generator Division +//<o> Generic clock generator 1 division <0x0000-0xFFFF> +// <id> gclk_gen_1_div +#ifndef CONF_GCLK_GEN_1_DIV +#define CONF_GCLK_GEN_1_DIV 1 +#endif +// </h> +// </e> + +// <e> Generic clock generator 2 configuration +// <i> Indicates whether generic clock 2 configuration is enabled or not +// <id> enable_gclk_gen_2 +#ifndef CONF_GCLK_GENERATOR_2_CONFIG +#define CONF_GCLK_GENERATOR_2_CONFIG 0 +#endif + +// <h> Generic Clock Generator Control +// <y> Generic clock generator 2 source +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_GENCTRL_SRC_GCLKIN"> Generic clock generator input pad +// <GCLK_GENCTRL_SRC_GCLKGEN1"> Generic clock generator 1 +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_DFLL"> Digital Frequency Locked Loop (DFLL48M) +// <GCLK_GENCTRL_SRC_DPLL0"> Digital Phase Locked Loop (DPLL0) +// <GCLK_GENCTRL_SRC_DPLL1"> Digital Phase Locked Loop (DPLL1) +// <i> This defines the clock source for generic clock generator 2 +// <id> gclk_gen_2_oscillator +#ifndef CONF_GCLK_GEN_2_SOURCE +#define CONF_GCLK_GEN_2_SOURCE GCLK_GENCTRL_SRC_XOSC0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> gclk_arch_gen_2_runstdby +#ifndef CONF_GCLK_GEN_2_RUNSTDBY +#define CONF_GCLK_GEN_2_RUNSTDBY 0 +#endif + +// <q> Divide Selection +// <i> Indicates whether Divide Selection is enabled or not +//<id> gclk_gen_2_div_sel +#ifndef CONF_GCLK_GEN_2_DIVSEL +#define CONF_GCLK_GEN_2_DIVSEL 1 +#endif + +// <q> Output Enable +// <i> Indicates whether Output Enable is enabled or not +// <id> gclk_arch_gen_2_oe +#ifndef CONF_GCLK_GEN_2_OE +#define CONF_GCLK_GEN_2_OE 0 +#endif + +// <q> Output Off Value +// <i> Indicates whether Output Off Value is enabled or not +// <id> gclk_arch_gen_2_oov +#ifndef CONF_GCLK_GEN_2_OOV +#define CONF_GCLK_GEN_2_OOV 0 +#endif + +// <q> Improve Duty Cycle +// <i> Indicates whether Improve Duty Cycle is enabled or not +// <id> gclk_arch_gen_2_idc +#ifndef CONF_GCLK_GEN_2_IDC +#define CONF_GCLK_GEN_2_IDC 0 +#endif + +// <q> Generic Clock Generator Enable +// <i> Indicates whether Generic Clock Generator Enable is enabled or not +// <id> gclk_arch_gen_2_enable +#ifndef CONF_GCLK_GEN_2_GENEN +#define CONF_GCLK_GEN_2_GENEN 0 +#endif +// </h> + +//<h> Generic Clock Generator Division +//<o> Generic clock generator 2 division <0x0000-0xFFFF> +// <id> gclk_gen_2_div +#ifndef CONF_GCLK_GEN_2_DIV +#define CONF_GCLK_GEN_2_DIV 1 +#endif +// </h> +// </e> + +// <e> Generic clock generator 3 configuration +// <i> Indicates whether generic clock 3 configuration is enabled or not +// <id> enable_gclk_gen_3 +#ifndef CONF_GCLK_GENERATOR_3_CONFIG +#define CONF_GCLK_GENERATOR_3_CONFIG 1 +#endif + +// <h> Generic Clock Generator Control +// <y> Generic clock generator 3 source +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_GENCTRL_SRC_GCLKIN"> Generic clock generator input pad +// <GCLK_GENCTRL_SRC_GCLKGEN1"> Generic clock generator 1 +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_DFLL"> Digital Frequency Locked Loop (DFLL48M) +// <GCLK_GENCTRL_SRC_DPLL0"> Digital Phase Locked Loop (DPLL0) +// <GCLK_GENCTRL_SRC_DPLL1"> Digital Phase Locked Loop (DPLL1) +// <i> This defines the clock source for generic clock generator 3 +// <id> gclk_gen_3_oscillator +#ifndef CONF_GCLK_GEN_3_SOURCE +#define CONF_GCLK_GEN_3_SOURCE GCLK_GENCTRL_SRC_XOSC32K +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> gclk_arch_gen_3_runstdby +#ifndef CONF_GCLK_GEN_3_RUNSTDBY +#define CONF_GCLK_GEN_3_RUNSTDBY 0 +#endif + +// <q> Divide Selection +// <i> Indicates whether Divide Selection is enabled or not +//<id> gclk_gen_3_div_sel +#ifndef CONF_GCLK_GEN_3_DIVSEL +#define CONF_GCLK_GEN_3_DIVSEL 0 +#endif + +// <q> Output Enable +// <i> Indicates whether Output Enable is enabled or not +// <id> gclk_arch_gen_3_oe +#ifndef CONF_GCLK_GEN_3_OE +#define CONF_GCLK_GEN_3_OE 0 +#endif + +// <q> Output Off Value +// <i> Indicates whether Output Off Value is enabled or not +// <id> gclk_arch_gen_3_oov +#ifndef CONF_GCLK_GEN_3_OOV +#define CONF_GCLK_GEN_3_OOV 0 +#endif + +// <q> Improve Duty Cycle +// <i> Indicates whether Improve Duty Cycle is enabled or not +// <id> gclk_arch_gen_3_idc +#ifndef CONF_GCLK_GEN_3_IDC +#define CONF_GCLK_GEN_3_IDC 0 +#endif + +// <q> Generic Clock Generator Enable +// <i> Indicates whether Generic Clock Generator Enable is enabled or not +// <id> gclk_arch_gen_3_enable +#ifndef CONF_GCLK_GEN_3_GENEN +#define CONF_GCLK_GEN_3_GENEN 1 +#endif +// </h> + +//<h> Generic Clock Generator Division +//<o> Generic clock generator 3 division <0x0000-0xFFFF> +// <id> gclk_gen_3_div +#ifndef CONF_GCLK_GEN_3_DIV +#define CONF_GCLK_GEN_3_DIV 1 +#endif +// </h> +// </e> + +// <e> Generic clock generator 4 configuration +// <i> Indicates whether generic clock 4 configuration is enabled or not +// <id> enable_gclk_gen_4 +#ifndef CONF_GCLK_GENERATOR_4_CONFIG +#define CONF_GCLK_GENERATOR_4_CONFIG 0 +#endif + +// <h> Generic Clock Generator Control +// <y> Generic clock generator 4 source +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_GENCTRL_SRC_GCLKIN"> Generic clock generator input pad +// <GCLK_GENCTRL_SRC_GCLKGEN1"> Generic clock generator 1 +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_DFLL"> Digital Frequency Locked Loop (DFLL48M) +// <GCLK_GENCTRL_SRC_DPLL0"> Digital Phase Locked Loop (DPLL0) +// <GCLK_GENCTRL_SRC_DPLL1"> Digital Phase Locked Loop (DPLL1) +// <i> This defines the clock source for generic clock generator 4 +// <id> gclk_gen_4_oscillator +#ifndef CONF_GCLK_GEN_4_SOURCE +#define CONF_GCLK_GEN_4_SOURCE GCLK_GENCTRL_SRC_XOSC0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> gclk_arch_gen_4_runstdby +#ifndef CONF_GCLK_GEN_4_RUNSTDBY +#define CONF_GCLK_GEN_4_RUNSTDBY 0 +#endif + +// <q> Divide Selection +// <i> Indicates whether Divide Selection is enabled or not +//<id> gclk_gen_4_div_sel +#ifndef CONF_GCLK_GEN_4_DIVSEL +#define CONF_GCLK_GEN_4_DIVSEL 0 +#endif + +// <q> Output Enable +// <i> Indicates whether Output Enable is enabled or not +// <id> gclk_arch_gen_4_oe +#ifndef CONF_GCLK_GEN_4_OE +#define CONF_GCLK_GEN_4_OE 0 +#endif + +// <q> Output Off Value +// <i> Indicates whether Output Off Value is enabled or not +// <id> gclk_arch_gen_4_oov +#ifndef CONF_GCLK_GEN_4_OOV +#define CONF_GCLK_GEN_4_OOV 0 +#endif + +// <q> Improve Duty Cycle +// <i> Indicates whether Improve Duty Cycle is enabled or not +// <id> gclk_arch_gen_4_idc +#ifndef CONF_GCLK_GEN_4_IDC +#define CONF_GCLK_GEN_4_IDC 0 +#endif + +// <q> Generic Clock Generator Enable +// <i> Indicates whether Generic Clock Generator Enable is enabled or not +// <id> gclk_arch_gen_4_enable +#ifndef CONF_GCLK_GEN_4_GENEN +#define CONF_GCLK_GEN_4_GENEN 0 +#endif +// </h> + +//<h> Generic Clock Generator Division +//<o> Generic clock generator 4 division <0x0000-0xFFFF> +// <id> gclk_gen_4_div +#ifndef CONF_GCLK_GEN_4_DIV +#define CONF_GCLK_GEN_4_DIV 1 +#endif +// </h> +// </e> + +// <e> Generic clock generator 5 configuration +// <i> Indicates whether generic clock 5 configuration is enabled or not +// <id> enable_gclk_gen_5 +#ifndef CONF_GCLK_GENERATOR_5_CONFIG +#define CONF_GCLK_GENERATOR_5_CONFIG 0 +#endif + +// <h> Generic Clock Generator Control +// <y> Generic clock generator 5 source +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_GENCTRL_SRC_GCLKIN"> Generic clock generator input pad +// <GCLK_GENCTRL_SRC_GCLKGEN1"> Generic clock generator 1 +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_DFLL"> Digital Frequency Locked Loop (DFLL48M) +// <GCLK_GENCTRL_SRC_DPLL0"> Digital Phase Locked Loop (DPLL0) +// <GCLK_GENCTRL_SRC_DPLL1"> Digital Phase Locked Loop (DPLL1) +// <i> This defines the clock source for generic clock generator 5 +// <id> gclk_gen_5_oscillator +#ifndef CONF_GCLK_GEN_5_SOURCE +#define CONF_GCLK_GEN_5_SOURCE GCLK_GENCTRL_SRC_XOSC0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> gclk_arch_gen_5_runstdby +#ifndef CONF_GCLK_GEN_5_RUNSTDBY +#define CONF_GCLK_GEN_5_RUNSTDBY 0 +#endif + +// <q> Divide Selection +// <i> Indicates whether Divide Selection is enabled or not +//<id> gclk_gen_5_div_sel +#ifndef CONF_GCLK_GEN_5_DIVSEL +#define CONF_GCLK_GEN_5_DIVSEL 0 +#endif + +// <q> Output Enable +// <i> Indicates whether Output Enable is enabled or not +// <id> gclk_arch_gen_5_oe +#ifndef CONF_GCLK_GEN_5_OE +#define CONF_GCLK_GEN_5_OE 0 +#endif + +// <q> Output Off Value +// <i> Indicates whether Output Off Value is enabled or not +// <id> gclk_arch_gen_5_oov +#ifndef CONF_GCLK_GEN_5_OOV +#define CONF_GCLK_GEN_5_OOV 0 +#endif + +// <q> Improve Duty Cycle +// <i> Indicates whether Improve Duty Cycle is enabled or not +// <id> gclk_arch_gen_5_idc +#ifndef CONF_GCLK_GEN_5_IDC +#define CONF_GCLK_GEN_5_IDC 0 +#endif + +// <q> Generic Clock Generator Enable +// <i> Indicates whether Generic Clock Generator Enable is enabled or not +// <id> gclk_arch_gen_5_enable +#ifndef CONF_GCLK_GEN_5_GENEN +#define CONF_GCLK_GEN_5_GENEN 0 +#endif +// </h> + +//<h> Generic Clock Generator Division +//<o> Generic clock generator 5 division <0x0000-0xFFFF> +// <id> gclk_gen_5_div +#ifndef CONF_GCLK_GEN_5_DIV +#define CONF_GCLK_GEN_5_DIV 1 +#endif +// </h> +// </e> + +// <e> Generic clock generator 6 configuration +// <i> Indicates whether generic clock 6 configuration is enabled or not +// <id> enable_gclk_gen_6 +#ifndef CONF_GCLK_GENERATOR_6_CONFIG +#define CONF_GCLK_GENERATOR_6_CONFIG 0 +#endif + +// <h> Generic Clock Generator Control +// <y> Generic clock generator 6 source +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_GENCTRL_SRC_GCLKIN"> Generic clock generator input pad +// <GCLK_GENCTRL_SRC_GCLKGEN1"> Generic clock generator 1 +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_DFLL"> Digital Frequency Locked Loop (DFLL48M) +// <GCLK_GENCTRL_SRC_DPLL0"> Digital Phase Locked Loop (DPLL0) +// <GCLK_GENCTRL_SRC_DPLL1"> Digital Phase Locked Loop (DPLL1) +// <i> This defines the clock source for generic clock generator 6 +// <id> gclk_gen_6_oscillator +#ifndef CONF_GCLK_GEN_6_SOURCE +#define CONF_GCLK_GEN_6_SOURCE GCLK_GENCTRL_SRC_XOSC0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> gclk_arch_gen_6_runstdby +#ifndef CONF_GCLK_GEN_6_RUNSTDBY +#define CONF_GCLK_GEN_6_RUNSTDBY 0 +#endif + +// <q> Divide Selection +// <i> Indicates whether Divide Selection is enabled or not +//<id> gclk_gen_6_div_sel +#ifndef CONF_GCLK_GEN_6_DIVSEL +#define CONF_GCLK_GEN_6_DIVSEL 0 +#endif + +// <q> Output Enable +// <i> Indicates whether Output Enable is enabled or not +// <id> gclk_arch_gen_6_oe +#ifndef CONF_GCLK_GEN_6_OE +#define CONF_GCLK_GEN_6_OE 0 +#endif + +// <q> Output Off Value +// <i> Indicates whether Output Off Value is enabled or not +// <id> gclk_arch_gen_6_oov +#ifndef CONF_GCLK_GEN_6_OOV +#define CONF_GCLK_GEN_6_OOV 0 +#endif + +// <q> Improve Duty Cycle +// <i> Indicates whether Improve Duty Cycle is enabled or not +// <id> gclk_arch_gen_6_idc +#ifndef CONF_GCLK_GEN_6_IDC +#define CONF_GCLK_GEN_6_IDC 0 +#endif + +// <q> Generic Clock Generator Enable +// <i> Indicates whether Generic Clock Generator Enable is enabled or not +// <id> gclk_arch_gen_6_enable +#ifndef CONF_GCLK_GEN_6_GENEN +#define CONF_GCLK_GEN_6_GENEN 0 +#endif +// </h> + +//<h> Generic Clock Generator Division +//<o> Generic clock generator 6 division <0x0000-0xFFFF> +// <id> gclk_gen_6_div +#ifndef CONF_GCLK_GEN_6_DIV +#define CONF_GCLK_GEN_6_DIV 1 +#endif +// </h> +// </e> + +// <e> Generic clock generator 7 configuration +// <i> Indicates whether generic clock 7 configuration is enabled or not +// <id> enable_gclk_gen_7 +#ifndef CONF_GCLK_GENERATOR_7_CONFIG +#define CONF_GCLK_GENERATOR_7_CONFIG 0 +#endif + +// <h> Generic Clock Generator Control +// <y> Generic clock generator 7 source +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_GENCTRL_SRC_GCLKIN"> Generic clock generator input pad +// <GCLK_GENCTRL_SRC_GCLKGEN1"> Generic clock generator 1 +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_DFLL"> Digital Frequency Locked Loop (DFLL48M) +// <GCLK_GENCTRL_SRC_DPLL0"> Digital Phase Locked Loop (DPLL0) +// <GCLK_GENCTRL_SRC_DPLL1"> Digital Phase Locked Loop (DPLL1) +// <i> This defines the clock source for generic clock generator 7 +// <id> gclk_gen_7_oscillator +#ifndef CONF_GCLK_GEN_7_SOURCE +#define CONF_GCLK_GEN_7_SOURCE GCLK_GENCTRL_SRC_XOSC0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> gclk_arch_gen_7_runstdby +#ifndef CONF_GCLK_GEN_7_RUNSTDBY +#define CONF_GCLK_GEN_7_RUNSTDBY 0 +#endif + +// <q> Divide Selection +// <i> Indicates whether Divide Selection is enabled or not +//<id> gclk_gen_7_div_sel +#ifndef CONF_GCLK_GEN_7_DIVSEL +#define CONF_GCLK_GEN_7_DIVSEL 0 +#endif + +// <q> Output Enable +// <i> Indicates whether Output Enable is enabled or not +// <id> gclk_arch_gen_7_oe +#ifndef CONF_GCLK_GEN_7_OE +#define CONF_GCLK_GEN_7_OE 0 +#endif + +// <q> Output Off Value +// <i> Indicates whether Output Off Value is enabled or not +// <id> gclk_arch_gen_7_oov +#ifndef CONF_GCLK_GEN_7_OOV +#define CONF_GCLK_GEN_7_OOV 0 +#endif + +// <q> Improve Duty Cycle +// <i> Indicates whether Improve Duty Cycle is enabled or not +// <id> gclk_arch_gen_7_idc +#ifndef CONF_GCLK_GEN_7_IDC +#define CONF_GCLK_GEN_7_IDC 0 +#endif + +// <q> Generic Clock Generator Enable +// <i> Indicates whether Generic Clock Generator Enable is enabled or not +// <id> gclk_arch_gen_7_enable +#ifndef CONF_GCLK_GEN_7_GENEN +#define CONF_GCLK_GEN_7_GENEN 0 +#endif +// </h> + +//<h> Generic Clock Generator Division +//<o> Generic clock generator 7 division <0x0000-0xFFFF> +// <id> gclk_gen_7_div +#ifndef CONF_GCLK_GEN_7_DIV +#define CONF_GCLK_GEN_7_DIV 1 +#endif +// </h> +// </e> + +// <e> Generic clock generator 8 configuration +// <i> Indicates whether generic clock 8 configuration is enabled or not +// <id> enable_gclk_gen_8 +#ifndef CONF_GCLK_GENERATOR_8_CONFIG +#define CONF_GCLK_GENERATOR_8_CONFIG 0 +#endif + +// <h> Generic Clock Generator Control +// <y> Generic clock generator 8 source +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_GENCTRL_SRC_GCLKIN"> Generic clock generator input pad +// <GCLK_GENCTRL_SRC_GCLKGEN1"> Generic clock generator 1 +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_DFLL"> Digital Frequency Locked Loop (DFLL48M) +// <GCLK_GENCTRL_SRC_DPLL0"> Digital Phase Locked Loop (DPLL0) +// <GCLK_GENCTRL_SRC_DPLL1"> Digital Phase Locked Loop (DPLL1) +// <i> This defines the clock source for generic clock generator 8 +// <id> gclk_gen_8_oscillator +#ifndef CONF_GCLK_GEN_8_SOURCE +#define CONF_GCLK_GEN_8_SOURCE GCLK_GENCTRL_SRC_XOSC0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> gclk_arch_gen_8_runstdby +#ifndef CONF_GCLK_GEN_8_RUNSTDBY +#define CONF_GCLK_GEN_8_RUNSTDBY 0 +#endif + +// <q> Divide Selection +// <i> Indicates whether Divide Selection is enabled or not +//<id> gclk_gen_8_div_sel +#ifndef CONF_GCLK_GEN_8_DIVSEL +#define CONF_GCLK_GEN_8_DIVSEL 0 +#endif + +// <q> Output Enable +// <i> Indicates whether Output Enable is enabled or not +// <id> gclk_arch_gen_8_oe +#ifndef CONF_GCLK_GEN_8_OE +#define CONF_GCLK_GEN_8_OE 0 +#endif + +// <q> Output Off Value +// <i> Indicates whether Output Off Value is enabled or not +// <id> gclk_arch_gen_8_oov +#ifndef CONF_GCLK_GEN_8_OOV +#define CONF_GCLK_GEN_8_OOV 0 +#endif + +// <q> Improve Duty Cycle +// <i> Indicates whether Improve Duty Cycle is enabled or not +// <id> gclk_arch_gen_8_idc +#ifndef CONF_GCLK_GEN_8_IDC +#define CONF_GCLK_GEN_8_IDC 0 +#endif + +// <q> Generic Clock Generator Enable +// <i> Indicates whether Generic Clock Generator Enable is enabled or not +// <id> gclk_arch_gen_8_enable +#ifndef CONF_GCLK_GEN_8_GENEN +#define CONF_GCLK_GEN_8_GENEN 0 +#endif +// </h> + +//<h> Generic Clock Generator Division +//<o> Generic clock generator 8 division <0x0000-0xFFFF> +// <id> gclk_gen_8_div +#ifndef CONF_GCLK_GEN_8_DIV +#define CONF_GCLK_GEN_8_DIV 1 +#endif +// </h> +// </e> + +// <e> Generic clock generator 9 configuration +// <i> Indicates whether generic clock 9 configuration is enabled or not +// <id> enable_gclk_gen_9 +#ifndef CONF_GCLK_GENERATOR_9_CONFIG +#define CONF_GCLK_GENERATOR_9_CONFIG 0 +#endif + +// <h> Generic Clock Generator Control +// <y> Generic clock generator 9 source +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_GENCTRL_SRC_GCLKIN"> Generic clock generator input pad +// <GCLK_GENCTRL_SRC_GCLKGEN1"> Generic clock generator 1 +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_DFLL"> Digital Frequency Locked Loop (DFLL48M) +// <GCLK_GENCTRL_SRC_DPLL0"> Digital Phase Locked Loop (DPLL0) +// <GCLK_GENCTRL_SRC_DPLL1"> Digital Phase Locked Loop (DPLL1) +// <i> This defines the clock source for generic clock generator 9 +// <id> gclk_gen_9_oscillator +#ifndef CONF_GCLK_GEN_9_SOURCE +#define CONF_GCLK_GEN_9_SOURCE GCLK_GENCTRL_SRC_XOSC0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> gclk_arch_gen_9_runstdby +#ifndef CONF_GCLK_GEN_9_RUNSTDBY +#define CONF_GCLK_GEN_9_RUNSTDBY 0 +#endif + +// <q> Divide Selection +// <i> Indicates whether Divide Selection is enabled or not +//<id> gclk_gen_9_div_sel +#ifndef CONF_GCLK_GEN_9_DIVSEL +#define CONF_GCLK_GEN_9_DIVSEL 0 +#endif + +// <q> Output Enable +// <i> Indicates whether Output Enable is enabled or not +// <id> gclk_arch_gen_9_oe +#ifndef CONF_GCLK_GEN_9_OE +#define CONF_GCLK_GEN_9_OE 0 +#endif + +// <q> Output Off Value +// <i> Indicates whether Output Off Value is enabled or not +// <id> gclk_arch_gen_9_oov +#ifndef CONF_GCLK_GEN_9_OOV +#define CONF_GCLK_GEN_9_OOV 0 +#endif + +// <q> Improve Duty Cycle +// <i> Indicates whether Improve Duty Cycle is enabled or not +// <id> gclk_arch_gen_9_idc +#ifndef CONF_GCLK_GEN_9_IDC +#define CONF_GCLK_GEN_9_IDC 0 +#endif + +// <q> Generic Clock Generator Enable +// <i> Indicates whether Generic Clock Generator Enable is enabled or not +// <id> gclk_arch_gen_9_enable +#ifndef CONF_GCLK_GEN_9_GENEN +#define CONF_GCLK_GEN_9_GENEN 0 +#endif +// </h> + +//<h> Generic Clock Generator Division +//<o> Generic clock generator 9 division <0x0000-0xFFFF> +// <id> gclk_gen_9_div +#ifndef CONF_GCLK_GEN_9_DIV +#define CONF_GCLK_GEN_9_DIV 1 +#endif +// </h> +// </e> + +// <e> Generic clock generator 10 configuration +// <i> Indicates whether generic clock 10 configuration is enabled or not +// <id> enable_gclk_gen_10 +#ifndef CONF_GCLK_GENERATOR_10_CONFIG +#define CONF_GCLK_GENERATOR_10_CONFIG 0 +#endif + +// <h> Generic Clock Generator Control +// <y> Generic clock generator 10 source +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_GENCTRL_SRC_GCLKIN"> Generic clock generator input pad +// <GCLK_GENCTRL_SRC_GCLKGEN1"> Generic clock generator 1 +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_DFLL"> Digital Frequency Locked Loop (DFLL48M) +// <GCLK_GENCTRL_SRC_DPLL0"> Digital Phase Locked Loop (DPLL0) +// <GCLK_GENCTRL_SRC_DPLL1"> Digital Phase Locked Loop (DPLL1) +// <i> This defines the clock source for generic clock generator 10 +// <id> gclk_gen_10_oscillator +#ifndef CONF_GCLK_GEN_10_SOURCE +#define CONF_GCLK_GEN_10_SOURCE GCLK_GENCTRL_SRC_XOSC0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> gclk_arch_gen_10_runstdby +#ifndef CONF_GCLK_GEN_10_RUNSTDBY +#define CONF_GCLK_GEN_10_RUNSTDBY 0 +#endif + +// <q> Divide Selection +// <i> Indicates whether Divide Selection is enabled or not +//<id> gclk_gen_10_div_sel +#ifndef CONF_GCLK_GEN_10_DIVSEL +#define CONF_GCLK_GEN_10_DIVSEL 0 +#endif + +// <q> Output Enable +// <i> Indicates whether Output Enable is enabled or not +// <id> gclk_arch_gen_10_oe +#ifndef CONF_GCLK_GEN_10_OE +#define CONF_GCLK_GEN_10_OE 0 +#endif + +// <q> Output Off Value +// <i> Indicates whether Output Off Value is enabled or not +// <id> gclk_arch_gen_10_oov +#ifndef CONF_GCLK_GEN_10_OOV +#define CONF_GCLK_GEN_10_OOV 0 +#endif + +// <q> Improve Duty Cycle +// <i> Indicates whether Improve Duty Cycle is enabled or not +// <id> gclk_arch_gen_10_idc +#ifndef CONF_GCLK_GEN_10_IDC +#define CONF_GCLK_GEN_10_IDC 0 +#endif + +// <q> Generic Clock Generator Enable +// <i> Indicates whether Generic Clock Generator Enable is enabled or not +// <id> gclk_arch_gen_10_enable +#ifndef CONF_GCLK_GEN_10_GENEN +#define CONF_GCLK_GEN_10_GENEN 0 +#endif +// </h> + +//<h> Generic Clock Generator Division +//<o> Generic clock generator 10 division <0x0000-0xFFFF> +// <id> gclk_gen_10_div +#ifndef CONF_GCLK_GEN_10_DIV +#define CONF_GCLK_GEN_10_DIV 1 +#endif +// </h> +// </e> + +// <e> Generic clock generator 11 configuration +// <i> Indicates whether generic clock 11 configuration is enabled or not +// <id> enable_gclk_gen_11 +#ifndef CONF_GCLK_GENERATOR_11_CONFIG +#define CONF_GCLK_GENERATOR_11_CONFIG 0 +#endif + +// <h> Generic Clock Generator Control +// <y> Generic clock generator 11 source +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_GENCTRL_SRC_GCLKIN"> Generic clock generator input pad +// <GCLK_GENCTRL_SRC_GCLKGEN1"> Generic clock generator 1 +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_DFLL"> Digital Frequency Locked Loop (DFLL48M) +// <GCLK_GENCTRL_SRC_DPLL0"> Digital Phase Locked Loop (DPLL0) +// <GCLK_GENCTRL_SRC_DPLL1"> Digital Phase Locked Loop (DPLL1) +// <i> This defines the clock source for generic clock generator 11 +// <id> gclk_gen_11_oscillator +#ifndef CONF_GCLK_GEN_11_SOURCE +#define CONF_GCLK_GEN_11_SOURCE GCLK_GENCTRL_SRC_XOSC0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> gclk_arch_gen_11_runstdby +#ifndef CONF_GCLK_GEN_11_RUNSTDBY +#define CONF_GCLK_GEN_11_RUNSTDBY 0 +#endif + +// <q> Divide Selection +// <i> Indicates whether Divide Selection is enabled or not +//<id> gclk_gen_11_div_sel +#ifndef CONF_GCLK_GEN_11_DIVSEL +#define CONF_GCLK_GEN_11_DIVSEL 0 +#endif + +// <q> Output Enable +// <i> Indicates whether Output Enable is enabled or not +// <id> gclk_arch_gen_11_oe +#ifndef CONF_GCLK_GEN_11_OE +#define CONF_GCLK_GEN_11_OE 0 +#endif + +// <q> Output Off Value +// <i> Indicates whether Output Off Value is enabled or not +// <id> gclk_arch_gen_11_oov +#ifndef CONF_GCLK_GEN_11_OOV +#define CONF_GCLK_GEN_11_OOV 0 +#endif + +// <q> Improve Duty Cycle +// <i> Indicates whether Improve Duty Cycle is enabled or not +// <id> gclk_arch_gen_11_idc +#ifndef CONF_GCLK_GEN_11_IDC +#define CONF_GCLK_GEN_11_IDC 0 +#endif + +// <q> Generic Clock Generator Enable +// <i> Indicates whether Generic Clock Generator Enable is enabled or not +// <id> gclk_arch_gen_11_enable +#ifndef CONF_GCLK_GEN_11_GENEN +#define CONF_GCLK_GEN_11_GENEN 0 +#endif +// </h> + +//<h> Generic Clock Generator Division +//<o> Generic clock generator 11 division <0x0000-0xFFFF> +// <id> gclk_gen_11_div +#ifndef CONF_GCLK_GEN_11_DIV +#define CONF_GCLK_GEN_11_DIV 1 +#endif +// </h> +// </e> + +// <<< end of configuration section >>> + +#endif // HPL_GCLK_CONFIG_H diff --git a/config/hpl_mclk_config.h b/config/hpl_mclk_config.h new file mode 100644 index 0000000..a5a7de5 --- /dev/null +++ b/config/hpl_mclk_config.h @@ -0,0 +1,104 @@ +/* Auto-generated config file hpl_mclk_config.h */ +#ifndef HPL_MCLK_CONFIG_H +#define HPL_MCLK_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#include <peripheral_clk_config.h> + +// <e> System Configuration +// <i> Indicates whether configuration for system is enabled or not +// <id> enable_cpu_clock +#ifndef CONF_SYSTEM_CONFIG +#define CONF_SYSTEM_CONFIG 1 +#endif + +// <h> Basic settings +// <y> CPU Clock source +// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0 +// <i> This defines the clock source for the CPU +// <id> cpu_clock_source +#ifndef CONF_CPU_SRC +#define CONF_CPU_SRC GCLK_PCHCTRL_GEN_GCLK0_Val +#endif + +// <y> CPU Clock Division Factor +// <MCLK_CPUDIV_DIV_DIV1_Val"> 1 +// <MCLK_CPUDIV_DIV_DIV2_Val"> 2 +// <MCLK_CPUDIV_DIV_DIV4_Val"> 4 +// <MCLK_CPUDIV_DIV_DIV8_Val"> 8 +// <MCLK_CPUDIV_DIV_DIV16_Val"> 16 +// <MCLK_CPUDIV_DIV_DIV32_Val"> 32 +// <MCLK_CPUDIV_DIV_DIV64_Val"> 64 +// <MCLK_CPUDIV_DIV_DIV128_Val"> 128 +// <i> Prescalar for CPU clock +// <id> cpu_div +#ifndef CONF_MCLK_CPUDIV +#define CONF_MCLK_CPUDIV MCLK_CPUDIV_DIV_DIV1_Val +#endif +// <y> Low Power Clock Division +// <MCLK_LPDIV_LPDIV_DIV1_Val"> Divide by 1 +// <MCLK_LPDIV_LPDIV_DIV2_Val"> Divide by 2 +// <MCLK_LPDIV_LPDIV_DIV4_Val"> Divide by 4 +// <MCLK_LPDIV_LPDIV_DIV8_Val"> Divide by 8 +// <MCLK_LPDIV_LPDIV_DIV16_Val"> Divide by 16 +// <MCLK_LPDIV_LPDIV_DIV32_Val"> Divide by 32 +// <MCLK_LPDIV_LPDIV_DIV64_Val"> Divide by 64 +// <MCLK_LPDIV_LPDIV_DIV128_Val"> Divide by 128 +// <id> mclk_arch_lpdiv +#ifndef CONF_MCLK_LPDIV +#define CONF_MCLK_LPDIV MCLK_LPDIV_LPDIV_DIV4_Val +#endif + +// <y> Backup Clock Division +// <MCLK_BUPDIV_BUPDIV_DIV1_Val"> Divide by 1 +// <MCLK_BUPDIV_BUPDIV_DIV2_Val"> Divide by 2 +// <MCLK_BUPDIV_BUPDIV_DIV4_Val"> Divide by 4 +// <MCLK_BUPDIV_BUPDIV_DIV8_Val"> Divide by 8 +// <MCLK_BUPDIV_BUPDIV_DIV16_Val"> Divide by 16 +// <MCLK_BUPDIV_BUPDIV_DIV32_Val"> Divide by 32 +// <MCLK_BUPDIV_BUPDIV_DIV64_Val"> Divide by 64 +// <MCLK_BUPDIV_BUPDIV_DIV128_Val"> Divide by 128 +// <id> mclk_arch_bupdiv +#ifndef CONF_MCLK_BUPDIV +#define CONF_MCLK_BUPDIV MCLK_BUPDIV_BUPDIV_DIV8_Val +#endif +// <y> High-Speed Clock Division +// <MCLK_HSDIV_DIV_DIV1_Val"> Divide by 1 +// <id> mclk_arch_hsdiv +#ifndef CONF_MCLK_HSDIV +#define CONF_MCLK_HSDIV MCLK_HSDIV_DIV_DIV1_Val +#endif +// </h> + +// <h> NVM Settings +// <o> NVM Wait States +// <i> These bits select the number of wait states for a read operation. +// <0=> 0 +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 +// <8=> 8 +// <9=> 9 +// <10=> 10 +// <11=> 11 +// <12=> 12 +// <13=> 13 +// <14=> 14 +// <15=> 15 +// <id> nvm_wait_states +#ifndef CONF_NVM_WAIT_STATE +#define CONF_NVM_WAIT_STATE 0 +#endif + +// </h> + +// </e> + +// <<< end of configuration section >>> + +#endif // HPL_MCLK_CONFIG_H diff --git a/config/hpl_osc32kctrl_config.h b/config/hpl_osc32kctrl_config.h new file mode 100644 index 0000000..d0b0d34 --- /dev/null +++ b/config/hpl_osc32kctrl_config.h @@ -0,0 +1,165 @@ +/* Auto-generated config file hpl_osc32kctrl_config.h */ +#ifndef HPL_OSC32KCTRL_CONFIG_H +#define HPL_OSC32KCTRL_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// <e> RTC Source configuration +// <id> enable_rtc_source +#ifndef CONF_RTCCTRL_CONFIG +#define CONF_RTCCTRL_CONFIG 0 +#endif + +// <h> RTC source control +// <y> RTC Clock Source Selection +// <GCLK_GENCTRL_SRC_OSCULP32K"> 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <i> This defines the clock source for RTC +// <id> rtc_source_oscillator +#ifndef CONF_RTCCTRL_SRC +#define CONF_RTCCTRL_SRC GCLK_GENCTRL_SRC_OSCULP32K +#endif + +// <q> Use 1 kHz output +// <id> rtc_1khz_selection +#ifndef CONF_RTCCTRL_1KHZ + +#define CONF_RTCCTRL_1KHZ 1 + +#endif + +#if CONF_RTCCTRL_SRC == GCLK_GENCTRL_SRC_OSCULP32K +#define CONF_RTCCTRL (CONF_RTCCTRL_1KHZ ? OSC32KCTRL_RTCCTRL_RTCSEL_ULP1K_Val : OSC32KCTRL_RTCCTRL_RTCSEL_ULP32K_Val) +#elif CONF_RTCCTRL_SRC == GCLK_GENCTRL_SRC_XOSC32K +#define CONF_RTCCTRL (CONF_RTCCTRL_1KHZ ? OSC32KCTRL_RTCCTRL_RTCSEL_XOSC1K_Val : OSC32KCTRL_RTCCTRL_RTCSEL_XOSC32K_Val) +#else +#error unexpected CONF_RTCCTRL_SRC +#endif + +// </h> +// </e> + +// <e> 32kHz External Crystal Oscillator Configuration +// <i> Indicates whether configuration for External 32K Osc is enabled or not +// <id> enable_xosc32k +#ifndef CONF_XOSC32K_CONFIG +#define CONF_XOSC32K_CONFIG 1 +#endif + +// <h> 32kHz External Crystal Oscillator Control +// <q> Oscillator enable +// <i> Indicates whether 32kHz External Crystal Oscillator is enabled or not +// <id> xosc32k_arch_enable +#ifndef CONF_XOSC32K_ENABLE +#define CONF_XOSC32K_ENABLE 1 +#endif + +// <o> Start-Up Time +// <0x0=>62592us +// <0x1=>125092us +// <0x2=>500092us +// <0x3=>1000092us +// <0x4=>2000092us +// <0x5=>4000092us +// <0x6=>8000092us +// <id> xosc32k_arch_startup +#ifndef CONF_XOSC32K_STARTUP +#define CONF_XOSC32K_STARTUP 0x0 +#endif + +// <q> On Demand Control +// <i> Indicates whether On Demand Control is enabled or not +// <id> xosc32k_arch_ondemand +#ifndef CONF_XOSC32K_ONDEMAND +#define CONF_XOSC32K_ONDEMAND 1 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> xosc32k_arch_runstdby +#ifndef CONF_XOSC32K_RUNSTDBY +#define CONF_XOSC32K_RUNSTDBY 0 +#endif + +// <q> 1kHz Output Enable +// <i> Indicates whether 1kHz Output is enabled or not +// <id> xosc32k_arch_en1k +#ifndef CONF_XOSC32K_EN1K +#define CONF_XOSC32K_EN1K 0 +#endif + +// <q> 32kHz Output Enable +// <i> Indicates whether 32kHz Output is enabled or not +// <id> xosc32k_arch_en32k +#ifndef CONF_XOSC32K_EN32K +#define CONF_XOSC32K_EN32K 1 +#endif + +// <q> Clock Switch Back +// <i> Indicates whether Clock Switch Back is enabled or not +// <id> xosc32k_arch_swben +#ifndef CONF_XOSC32K_SWBEN +#define CONF_XOSC32K_SWBEN 0 +#endif + +// <q> Clock Failure Detector +// <i> Indicates whether Clock Failure Detector is enabled or not +// <id> xosc32k_arch_cfden +#ifndef CONF_XOSC32K_CFDEN +#define CONF_XOSC32K_CFDEN 0 +#endif + +// <q> Clock Failure Detector Event Out +// <i> Indicates whether Clock Failure Detector Event Out is enabled or not +// <id> xosc32k_arch_cfdeo +#ifndef CONF_XOSC32K_CFDEO +#define CONF_XOSC32K_CFDEO 0 +#endif + +// <q> Crystal connected to XIN32/XOUT32 Enable +// <i> Indicates whether the connections between the I/O pads and the external clock or crystal oscillator is enabled or not +// <id> xosc32k_arch_xtalen +#ifndef CONF_XOSC32K_XTALEN +#define CONF_XOSC32K_XTALEN 1 +#endif + +// <o> Control Gain Mode +// <0x0=>Low Power mode +// <0x1=>Standard mode +// <0x2=>High Speed mode +// <id> xosc32k_arch_cgm +#ifndef CONF_XOSC32K_CGM +#define CONF_XOSC32K_CGM 0x1 +#endif + +// </h> +// </e> + +// <e> 32kHz Ultra Low Power Internal Oscillator Configuration +// <i> Indicates whether configuration for OSCULP32K is enabled or not +// <id> enable_osculp32k +#ifndef CONF_OSCULP32K_CONFIG +#define CONF_OSCULP32K_CONFIG 1 +#endif + +// <h> 32kHz Ultra Low Power Internal Oscillator Control + +// <q> Oscillator Calibration Control +// <i> Indicates whether Oscillator Calibration is enabled or not +// <id> osculp32k_calib_enable +#ifndef CONF_OSCULP32K_CALIB_ENABLE +#define CONF_OSCULP32K_CALIB_ENABLE 0 +#endif + +// <o> Oscillator Calibration <0x0-0x3F> +// <id> osculp32k_calib +#ifndef CONF_OSCULP32K_CALIB +#define CONF_OSCULP32K_CALIB 0x0 +#endif + +// </h> +// </e> + +// <<< end of configuration section >>> + +#endif // HPL_OSC32KCTRL_CONFIG_H diff --git a/config/hpl_oscctrl_config.h b/config/hpl_oscctrl_config.h new file mode 100644 index 0000000..11e4a24 --- /dev/null +++ b/config/hpl_oscctrl_config.h @@ -0,0 +1,634 @@ +/* Auto-generated config file hpl_oscctrl_config.h */ +#ifndef HPL_OSCCTRL_CONFIG_H +#define HPL_OSCCTRL_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// <e> External Multipurpose Crystal Oscillator Configuration +// <i> Indicates whether configuration for XOSC0 is enabled or not +// <id> enable_xosc0 +#ifndef CONF_XOSC0_CONFIG +#define CONF_XOSC0_CONFIG 0 +#endif + +// <o> Frequency <8000000-48000000> +// <i> Oscillation frequency of the resonator connected to the External Multipurpose Crystal Oscillator. +// <id> xosc0_frequency +#ifndef CONF_XOSC_FREQUENCY +#define CONF_XOSC0_FREQUENCY 12000000 +#endif + +// <h> External Multipurpose Crystal Oscillator Control +// <q> Oscillator enable +// <i> Indicates whether External Multipurpose Crystal Oscillator is enabled or not +// <id> xosc0_arch_enable +#ifndef CONF_XOSC0_ENABLE +#define CONF_XOSC0_ENABLE 0 +#endif + +// <o> Start-Up Time +// <0x0=>31us +// <0x1=>61us +// <0x2=>122us +// <0x3=>244us +// <0x4=>488us +// <0x5=>977us +// <0x6=>1953us +// <0x7=>3906us +// <0x8=>7813us +// <0x9=>15625us +// <0xA=>31250us +// <0xB=>62500us +// <0xC=>125000us +// <0xD=>250000us +// <0xE=>500000us +// <0xF=>1000000us +// <id> xosc0_arch_startup +#ifndef CONF_XOSC0_STARTUP +#define CONF_XOSC0_STARTUP 0 +#endif + +// <q> Clock Switch Back +// <i> Indicates whether Clock Switch Back is enabled or not +// <id> xosc0_arch_swben +#ifndef CONF_XOSC0_SWBEN +#define CONF_XOSC0_SWBEN 0 +#endif + +// <q> Clock Failure Detector +// <i> Indicates whether Clock Failure Detector is enabled or not +// <id> xosc0_arch_cfden +#ifndef CONF_XOSC0_CFDEN +#define CONF_XOSC0_CFDEN 0 +#endif + +// <q> Automatic Loop Control Enable +// <i> Indicates whether Automatic Loop Control is enabled or not +// <id> xosc0_arch_enalc +#ifndef CONF_XOSC0_ENALC +#define CONF_XOSC0_ENALC 0 +#endif + +// <q> Low Buffer Gain Enable +// <i> Indicates whether Low Buffer Gain is enabled or not +// <id> xosc0_arch_lowbufgain +#ifndef CONF_XOSC0_LOWBUFGAIN +#define CONF_XOSC0_LOWBUFGAIN 0 +#endif + +// <q> On Demand Control +// <i> Indicates whether On Demand Control is enabled or not +// <id> xosc0_arch_ondemand +#ifndef CONF_XOSC0_ONDEMAND +#define CONF_XOSC0_ONDEMAND 0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> xosc0_arch_runstdby +#ifndef CONF_XOSC0_RUNSTDBY +#define CONF_XOSC0_RUNSTDBY 0 +#endif + +// <q> Crystal connected to XIN/XOUT Enable +// <i> Indicates whether the connections between the I/O pads and the external clock or crystal oscillator is enabled or not +// <id> xosc0_arch_xtalen +#ifndef CONF_XOSC0_XTALEN +#define CONF_XOSC0_XTALEN 0 +#endif +//</h> +//</e> + +#if CONF_XOSC0_FREQUENCY >= 32000000 +#define CONF_XOSC0_CFDPRESC 0x0 +#define CONF_XOSC0_IMULT 0x7 +#define CONF_XOSC0_IPTAT 0x3 +#elif CONF_XOSC0_FREQUENCY >= 24000000 +#define CONF_XOSC0_CFDPRESC 0x1 +#define CONF_XOSC0_IMULT 0x6 +#define CONF_XOSC0_IPTAT 0x3 +#elif CONF_XOSC0_FREQUENCY >= 16000000 +#define CONF_XOSC0_CFDPRESC 0x2 +#define CONF_XOSC0_IMULT 0x5 +#define CONF_XOSC0_IPTAT 0x3 +#elif CONF_XOSC0_FREQUENCY >= 8000000 +#define CONF_XOSC0_CFDPRESC 0x3 +#define CONF_XOSC0_IMULT 0x4 +#define CONF_XOSC0_IPTAT 0x3 +#endif + +// <e> External Multipurpose Crystal Oscillator Configuration +// <i> Indicates whether configuration for XOSC1 is enabled or not +// <id> enable_xosc1 +#ifndef CONF_XOSC1_CONFIG +#define CONF_XOSC1_CONFIG 1 +#endif + +// <o> Frequency <8000000-48000000> +// <i> Oscillation frequency of the resonator connected to the External Multipurpose Crystal Oscillator. +// <id> xosc1_frequency +#ifndef CONF_XOSC_FREQUENCY +#define CONF_XOSC1_FREQUENCY 12000000 +#endif + +// <h> External Multipurpose Crystal Oscillator Control +// <q> Oscillator enable +// <i> Indicates whether External Multipurpose Crystal Oscillator is enabled or not +// <id> xosc1_arch_enable +#ifndef CONF_XOSC1_ENABLE +#define CONF_XOSC1_ENABLE 1 +#endif + +// <o> Start-Up Time +// <0x0=>31us +// <0x1=>61us +// <0x2=>122us +// <0x3=>244us +// <0x4=>488us +// <0x5=>977us +// <0x6=>1953us +// <0x7=>3906us +// <0x8=>7813us +// <0x9=>15625us +// <0xA=>31250us +// <0xB=>62500us +// <0xC=>125000us +// <0xD=>250000us +// <0xE=>500000us +// <0xF=>1000000us +// <id> xosc1_arch_startup +#ifndef CONF_XOSC1_STARTUP +#define CONF_XOSC1_STARTUP 0 +#endif + +// <q> Clock Switch Back +// <i> Indicates whether Clock Switch Back is enabled or not +// <id> xosc1_arch_swben +#ifndef CONF_XOSC1_SWBEN +#define CONF_XOSC1_SWBEN 0 +#endif + +// <q> Clock Failure Detector +// <i> Indicates whether Clock Failure Detector is enabled or not +// <id> xosc1_arch_cfden +#ifndef CONF_XOSC1_CFDEN +#define CONF_XOSC1_CFDEN 0 +#endif + +// <q> Automatic Loop Control Enable +// <i> Indicates whether Automatic Loop Control is enabled or not +// <id> xosc1_arch_enalc +#ifndef CONF_XOSC1_ENALC +#define CONF_XOSC1_ENALC 0 +#endif + +// <q> Low Buffer Gain Enable +// <i> Indicates whether Low Buffer Gain is enabled or not +// <id> xosc1_arch_lowbufgain +#ifndef CONF_XOSC1_LOWBUFGAIN +#define CONF_XOSC1_LOWBUFGAIN 0 +#endif + +// <q> On Demand Control +// <i> Indicates whether On Demand Control is enabled or not +// <id> xosc1_arch_ondemand +#ifndef CONF_XOSC1_ONDEMAND +#define CONF_XOSC1_ONDEMAND 0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> xosc1_arch_runstdby +#ifndef CONF_XOSC1_RUNSTDBY +#define CONF_XOSC1_RUNSTDBY 0 +#endif + +// <q> Crystal connected to XIN/XOUT Enable +// <i> Indicates whether the connections between the I/O pads and the external clock or crystal oscillator is enabled or not +// <id> xosc1_arch_xtalen +#ifndef CONF_XOSC1_XTALEN +#define CONF_XOSC1_XTALEN 1 +#endif +//</h> +//</e> + +#if CONF_XOSC1_FREQUENCY >= 32000000 +#define CONF_XOSC1_CFDPRESC 0x0 +#define CONF_XOSC1_IMULT 0x7 +#define CONF_XOSC1_IPTAT 0x3 +#elif CONF_XOSC1_FREQUENCY >= 24000000 +#define CONF_XOSC1_CFDPRESC 0x1 +#define CONF_XOSC1_IMULT 0x6 +#define CONF_XOSC1_IPTAT 0x3 +#elif CONF_XOSC1_FREQUENCY >= 16000000 +#define CONF_XOSC1_CFDPRESC 0x2 +#define CONF_XOSC1_IMULT 0x5 +#define CONF_XOSC1_IPTAT 0x3 +#elif CONF_XOSC1_FREQUENCY >= 8000000 +#define CONF_XOSC1_CFDPRESC 0x3 +#define CONF_XOSC1_IMULT 0x4 +#define CONF_XOSC1_IPTAT 0x3 +#endif + +// <e> DFLL Configuration +// <i> Indicates whether configuration for DFLL is enabled or not +// <id> enable_dfll +#ifndef CONF_DFLL_CONFIG +#define CONF_DFLL_CONFIG 1 +#endif + +// <y> Reference Clock Source +// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0 +// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1 +// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2 +// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3 +// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4 +// <GCLK_PCHCTRL_GEN_GCLK5_Val"> Generic clock generator 5 +// <GCLK_PCHCTRL_GEN_GCLK6_Val"> Generic clock generator 6 +// <GCLK_PCHCTRL_GEN_GCLK7_Val"> Generic clock generator 7 +// <GCLK_PCHCTRL_GEN_GCLK8_Val"> Generic clock generator 8 +// <GCLK_PCHCTRL_GEN_GCLK9_Val"> Generic clock generator 9 +// <GCLK_PCHCTRL_GEN_GCLK10_Val"> Generic clock generator 10 +// <GCLK_PCHCTRL_GEN_GCLK11_Val"> Generic clock generator 11 +// <i> Select the clock source +// <id> dfll_ref_clock +#ifndef CONF_DFLL_GCLK +#define CONF_DFLL_GCLK GCLK_PCHCTRL_GEN_GCLK3_Val +#endif + +// <h> Digital Frequency Locked Loop Control +// <q> DFLL Enable +// <i> Indicates whether DFLL is enabled or not +// <id> dfll_arch_enable +#ifndef CONF_DFLL_ENABLE +#define CONF_DFLL_ENABLE 1 +#endif + +// <q> On Demand Control +// <i> Indicates whether On Demand Control is enabled or not +// <id> dfll_arch_ondemand +#ifndef CONF_DFLL_ONDEMAND +#define CONF_DFLL_ONDEMAND 0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> dfll_arch_runstdby +#ifndef CONF_DFLL_RUNSTDBY +#define CONF_DFLL_RUNSTDBY 0 +#endif + +// <q> USB Clock Recovery Mode +// <i> Indicates whether USB Clock Recovery Mode is enabled or not +// <id> dfll_arch_usbcrm +#ifndef CONF_DFLL_USBCRM +#define CONF_DFLL_USBCRM 1 +#endif + +// <q> Wait Lock +// <i> Indicates whether Wait Lock is enabled or not +// <id> dfll_arch_waitlock +#ifndef CONF_DFLL_WAITLOCK +#define CONF_DFLL_WAITLOCK 0 +#endif + +// <q> Bypass Coarse Lock +// <i> Indicates whether Bypass Coarse Lock is enabled or not +// <id> dfll_arch_bplckc +#ifndef CONF_DFLL_BPLCKC +#define CONF_DFLL_BPLCKC 0 +#endif + +// <q> Quick Lock Disable +// <i> Indicates whether Quick Lock Disable is enabled or not +// <id> dfll_arch_qldis +#ifndef CONF_DFLL_QLDIS +#define CONF_DFLL_QLDIS 0 +#endif + +// <q> Chill Cycle Disable +// <i> Indicates whether Chill Cycle Disable is enabled or not +// <id> dfll_arch_ccdis +#ifndef CONF_DFLL_CCDIS +#define CONF_DFLL_CCDIS 1 +#endif + +// <q> Lose Lock After Wake +// <i> Indicates whether Lose Lock After Wake is enabled or not +// <id> dfll_arch_llaw +#ifndef CONF_DFLL_LLAW +#define CONF_DFLL_LLAW 0 +#endif + +// <q> Stable DFLL Frequency +// <i> Indicates whether Stable DFLL Frequency is enabled or not +// <id> dfll_arch_stable +#ifndef CONF_DFLL_STABLE +#define CONF_DFLL_STABLE 0 +#endif + +// <o> Operating Mode Selection +// <0=>Open Loop Mode +// <1=>Closed Loop Mode +// <id> dfll_mode +#ifndef CONF_DFLL_MODE +#define CONF_DFLL_MODE 0x1 +#endif + +// <o> Coarse Maximum Step <0x0-0x1F> +// <id> dfll_arch_cstep +#ifndef CONF_DFLL_CSTEP +#define CONF_DFLL_CSTEP 0x1 +#endif + +// <o> Fine Maximum Step <0x0-0xFF> +// <id> dfll_arch_fstep +#ifndef CONF_DFLL_FSTEP +#define CONF_DFLL_FSTEP 0x1 +#endif + +// <o> DFLL Multiply Factor <0x0-0xFFFF> +// <id> dfll_mul +#ifndef CONF_DFLL_MUL +#define CONF_DFLL_MUL 0xbb80 +#endif + +// <e> DFLL Calibration Overwrite +// <i> Indicates whether Overwrite Calibration value of DFLL +// <id> dfll_arch_calibration +#ifndef CONF_DFLL_OVERWRITE_CALIBRATION +#define CONF_DFLL_OVERWRITE_CALIBRATION 0 +#endif + +// <o> Coarse Value <0x0-0x3F> +// <id> dfll_arch_coarse +#ifndef CONF_DFLL_COARSE +#define CONF_DFLL_COARSE (0x1f / 4) +#endif + +// <o> Fine Value <0x0-0xFF> +// <id> dfll_arch_fine +#ifndef CONF_DFLL_FINE +#define CONF_DFLL_FINE (0x80) +#endif + +//</e> + +//</h> + +//</e> + +// <e> FDPLL0 Configuration +// <i> Indicates whether configuration for FDPLL0 is enabled or not +// <id> enable_fdpll0 +#ifndef CONF_FDPLL0_CONFIG +#define CONF_FDPLL0_CONFIG 0 +#endif + +// <y> Reference Clock Source +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0 +// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1 +// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2 +// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3 +// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4 +// <GCLK_PCHCTRL_GEN_GCLK5_Val"> Generic clock generator 5 +// <GCLK_PCHCTRL_GEN_GCLK6_Val"> Generic clock generator 6 +// <GCLK_PCHCTRL_GEN_GCLK7_Val"> Generic clock generator 7 +// <GCLK_PCHCTRL_GEN_GCLK8_Val"> Generic clock generator 8 +// <GCLK_PCHCTRL_GEN_GCLK9_Val"> Generic clock generator 9 +// <GCLK_PCHCTRL_GEN_GCLK10_Val"> Generic clock generator 10 +// <GCLK_PCHCTRL_GEN_GCLK11_Val"> Generic clock generator 11 +// <i> Select the clock source. +// <id> fdpll0_ref_clock +#ifndef CONF_FDPLL0_GCLK +#define CONF_FDPLL0_GCLK GCLK_GENCTRL_SRC_XOSC32K +#endif + +// <h> Digital Phase Locked Loop Control +// <q> Enable +// <i> Indicates whether Digital Phase Locked Loop is enabled or not +// <id> fdpll0_arch_enable +#ifndef CONF_FDPLL0_ENABLE +#define CONF_FDPLL0_ENABLE 0 +#endif + +// <q> On Demand Control +// <i> Indicates whether On Demand Control is enabled or not +// <id> fdpll0_arch_ondemand +#ifndef CONF_FDPLL0_ONDEMAND +#define CONF_FDPLL0_ONDEMAND 0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> fdpll0_arch_runstdby +#ifndef CONF_FDPLL0_RUNSTDBY +#define CONF_FDPLL0_RUNSTDBY 0 +#endif + +// <o> Loop Divider Ratio Fractional Part <0x0-0x1F> +// <id> fdpll0_ldrfrac +#ifndef CONF_FDPLL0_LDRFRAC +#define CONF_FDPLL0_LDRFRAC 0xd +#endif + +// <o> Loop Divider Ratio Integer Part <0x0-0x1FFF> +// <id> fdpll0_ldr +#ifndef CONF_FDPLL0_LDR +#define CONF_FDPLL0_LDR 0x5b7 +#endif + +// <o> Clock Divider <0x0-0x7FF> +// <id> fdpll0_clock_div +#ifndef CONF_FDPLL0_DIV +#define CONF_FDPLL0_DIV 0x0 +#endif + +// <q> DCO Filter Enable +// <i> Indicates whether DCO Filter Enable is enabled or not +// <id> fdpll0_arch_dcoen +#ifndef CONF_FDPLL0_DCOEN +#define CONF_FDPLL0_DCOEN 0 +#endif + +// <o> Sigma-Delta DCO Filter Selection <0x0-0x7> +// <id> fdpll0_clock_dcofilter +#ifndef CONF_FDPLL0_DCOFILTER +#define CONF_FDPLL0_DCOFILTER 0x0 +#endif + +// <q> Lock Bypass +// <i> Indicates whether Lock Bypass is enabled or not +// <id> fdpll0_arch_lbypass +#ifndef CONF_FDPLL0_LBYPASS +#define CONF_FDPLL0_LBYPASS 0 +#endif + +// <o> Lock Time +// <0x0=>No time-out, automatic lock +// <0x4=>The Time-out if no lock within 800 us +// <0x5=>The Time-out if no lock within 900 us +// <0x6=>The Time-out if no lock within 1 ms +// <0x7=>The Time-out if no lock within 11 ms +// <id> fdpll0_arch_ltime +#ifndef CONF_FDPLL0_LTIME +#define CONF_FDPLL0_LTIME 0x0 +#endif + +// <o> Reference Clock Selection +// <0x0=>GCLK clock reference +// <0x1=>XOSC32K clock reference +// <0x2=>XOSC0 clock reference +// <0x3=>XOSC1 clock reference +// <id> fdpll0_arch_refclk +#ifndef CONF_FDPLL0_REFCLK +#define CONF_FDPLL0_REFCLK 0x1 +#endif + +// <q> Wake Up Fast +// <i> Indicates whether Wake Up Fast is enabled or not +// <id> fdpll0_arch_wuf +#ifndef CONF_FDPLL0_WUF +#define CONF_FDPLL0_WUF 0 +#endif + +// <o> Proportional Integral Filter Selection <0x0-0xF> +// <id> fdpll0_arch_filter +#ifndef CONF_FDPLL0_FILTER +#define CONF_FDPLL0_FILTER 0x0 +#endif + +//</h> +//</e> +// <e> FDPLL1 Configuration +// <i> Indicates whether configuration for FDPLL1 is enabled or not +// <id> enable_fdpll1 +#ifndef CONF_FDPLL1_CONFIG +#define CONF_FDPLL1_CONFIG 0 +#endif + +// <y> Reference Clock Source +// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) +// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0) +// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1) +// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0 +// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1 +// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2 +// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3 +// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4 +// <GCLK_PCHCTRL_GEN_GCLK5_Val"> Generic clock generator 5 +// <GCLK_PCHCTRL_GEN_GCLK6_Val"> Generic clock generator 6 +// <GCLK_PCHCTRL_GEN_GCLK7_Val"> Generic clock generator 7 +// <GCLK_PCHCTRL_GEN_GCLK8_Val"> Generic clock generator 8 +// <GCLK_PCHCTRL_GEN_GCLK9_Val"> Generic clock generator 9 +// <GCLK_PCHCTRL_GEN_GCLK10_Val"> Generic clock generator 10 +// <GCLK_PCHCTRL_GEN_GCLK11_Val"> Generic clock generator 11 +// <i> Select the clock source. +// <id> fdpll1_ref_clock +#ifndef CONF_FDPLL1_GCLK +#define CONF_FDPLL1_GCLK GCLK_GENCTRL_SRC_XOSC32K +#endif + +// <h> Digital Phase Locked Loop Control +// <q> Enable +// <i> Indicates whether Digital Phase Locked Loop is enabled or not +// <id> fdpll1_arch_enable +#ifndef CONF_FDPLL1_ENABLE +#define CONF_FDPLL1_ENABLE 0 +#endif + +// <q> On Demand Control +// <i> Indicates whether On Demand Control is enabled or not +// <id> fdpll1_arch_ondemand +#ifndef CONF_FDPLL1_ONDEMAND +#define CONF_FDPLL1_ONDEMAND 0 +#endif + +// <q> Run in Standby +// <i> Indicates whether Run in Standby is enabled or not +// <id> fdpll1_arch_runstdby +#ifndef CONF_FDPLL1_RUNSTDBY +#define CONF_FDPLL1_RUNSTDBY 0 +#endif + +// <o> Loop Divider Ratio Fractional Part <0x0-0x1F> +// <id> fdpll1_ldrfrac +#ifndef CONF_FDPLL1_LDRFRAC +#define CONF_FDPLL1_LDRFRAC 0xd +#endif + +// <o> Loop Divider Ratio Integer Part <0x0-0x1FFF> +// <id> fdpll1_ldr +#ifndef CONF_FDPLL1_LDR +#define CONF_FDPLL1_LDR 0x5b7 +#endif + +// <o> Clock Divider <0x0-0x7FF> +// <id> fdpll1_clock_div +#ifndef CONF_FDPLL1_DIV +#define CONF_FDPLL1_DIV 0x0 +#endif + +// <q> DCO Filter Enable +// <i> Indicates whether DCO Filter Enable is enabled or not +// <id> fdpll1_arch_dcoen +#ifndef CONF_FDPLL1_DCOEN +#define CONF_FDPLL1_DCOEN 0 +#endif + +// <o> Sigma-Delta DCO Filter Selection <0x0-0x7> +// <id> fdpll1_clock_dcofilter +#ifndef CONF_FDPLL1_DCOFILTER +#define CONF_FDPLL1_DCOFILTER 0x0 +#endif + +// <q> Lock Bypass +// <i> Indicates whether Lock Bypass is enabled or not +// <id> fdpll1_arch_lbypass +#ifndef CONF_FDPLL1_LBYPASS +#define CONF_FDPLL1_LBYPASS 0 +#endif + +// <o> Lock Time +// <0x0=>No time-out, automatic lock +// <0x4=>The Time-out if no lock within 800 us +// <0x5=>The Time-out if no lock within 900 us +// <0x6=>The Time-out if no lock within 1 ms +// <0x7=>The Time-out if no lock within 11 ms +// <id> fdpll1_arch_ltime +#ifndef CONF_FDPLL1_LTIME +#define CONF_FDPLL1_LTIME 0x0 +#endif + +// <o> Reference Clock Selection +// <0x0=>GCLK clock reference +// <0x1=>XOSC32K clock reference +// <0x2=>XOSC0 clock reference +// <0x3=>XOSC1 clock reference +// <id> fdpll1_arch_refclk +#ifndef CONF_FDPLL1_REFCLK +#define CONF_FDPLL1_REFCLK 0x1 +#endif + +// <q> Wake Up Fast +// <i> Indicates whether Wake Up Fast is enabled or not +// <id> fdpll1_arch_wuf +#ifndef CONF_FDPLL1_WUF +#define CONF_FDPLL1_WUF 0 +#endif + +// <o> Proportional Integral Filter Selection <0x0-0xF> +// <id> fdpll1_arch_filter +#ifndef CONF_FDPLL1_FILTER +#define CONF_FDPLL1_FILTER 0x0 +#endif + +//</h> +//</e> + +// <<< end of configuration section >>> + +#endif // HPL_OSCCTRL_CONFIG_H diff --git a/config/hpl_port_config.h b/config/hpl_port_config.h new file mode 100644 index 0000000..b5315f0 --- /dev/null +++ b/config/hpl_port_config.h @@ -0,0 +1,522 @@ +/* Auto-generated config file hpl_port_config.h */ +#ifndef HPL_PORT_CONFIG_H +#define HPL_PORT_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// <e> PORT Input Event 0 configuration +// <id> enable_port_input_event_0 +#ifndef CONF_PORT_EVCTRL_PORT_0 +#define CONF_PORT_EVCTRL_PORT_0 0 +#endif + +// <h> PORT Input Event 0 configuration on PORT A + +// <q> PORTA Input Event 0 Enable +// <i> The event action will be triggered on any incoming event if PORT A Input Event 0 configuration is enabled +// <id> porta_input_event_enable_0 +#ifndef CONF_PORTA_EVCTRL_PORTEI_0 +#define CONF_PORTA_EVCTRL_PORTEI_0 0x0 +#endif + +// <o> PORTA Event 0 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port A on which the event action will be performed +// <id> porta_event_pin_identifier_0 +#ifndef CONF_PORTA_EVCTRL_PID_0 +#define CONF_PORTA_EVCTRL_PID_0 0x0 +#endif + +// <o> PORTA Event 0 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT A will perform on event input 0 +// <id> porta_event_action_0 +#ifndef CONF_PORTA_EVCTRL_EVACT_0 +#define CONF_PORTA_EVCTRL_EVACT_0 0 +#endif + +// </h> +// <h> PORT Input Event 0 configuration on PORT B + +// <q> PORTB Input Event 0 Enable +// <i> The event action will be triggered on any incoming event if PORT B Input Event 0 configuration is enabled +// <id> portb_input_event_enable_0 +#ifndef CONF_PORTB_EVCTRL_PORTEI_0 +#define CONF_PORTB_EVCTRL_PORTEI_0 0x0 +#endif + +// <o> PORTB Event 0 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port B on which the event action will be performed +// <id> portb_event_pin_identifier_0 +#ifndef CONF_PORTB_EVCTRL_PID_0 +#define CONF_PORTB_EVCTRL_PID_0 0x0 +#endif + +// <o> PORTB Event 0 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT B will perform on event input 0 +// <id> portb_event_action_0 +#ifndef CONF_PORTB_EVCTRL_EVACT_0 +#define CONF_PORTB_EVCTRL_EVACT_0 0 +#endif + +// </h> +// <h> PORT Input Event 0 configuration on PORT C + +// <q> PORTC Input Event 0 Enable +// <i> The event action will be triggered on any incoming event if PORT C Input Event 0 configuration is enabled +// <id> portc_input_event_enable_0 +#ifndef CONF_PORTC_EVCTRL_PORTEI_0 +#define CONF_PORTC_EVCTRL_PORTEI_0 0x0 +#endif + +// <o> PORTC Event 0 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port C on which the event action will be performed +// <id> portc_event_pin_identifier_0 +#ifndef CONF_PORTC_EVCTRL_PID_0 +#define CONF_PORTC_EVCTRL_PID_0 0x0 +#endif + +// <o> PORTC Event 0 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT C will perform on event input 0 +// <id> portc_event_action_0 +#ifndef CONF_PORTC_EVCTRL_EVACT_0 +#define CONF_PORTC_EVCTRL_EVACT_0 0 +#endif + +// </h> +// <h> PORT Input Event 0 configuration on PORT D + +// <q> PORTD Input Event 0 Enable +// <i> The event action will be triggered on any incoming event if PORT D Input Event 0 configuration is enabled +// <id> portd_input_event_enable_0 +#ifndef CONF_PORTD_EVCTRL_PORTEI_0 +#define CONF_PORTD_EVCTRL_PORTEI_0 0x0 +#endif + +// <o> PORTD Event 0 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port D on which the event action will be performed +// <id> portd_event_pin_identifier_0 +#ifndef CONF_PORTD_EVCTRL_PID_0 +#define CONF_PORTD_EVCTRL_PID_0 0x0 +#endif + +// <o> PORTD Event 0 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT D will perform on event input 0 +// <id> portd_event_action_0 +#ifndef CONF_PORTD_EVCTRL_EVACT_0 +#define CONF_PORTD_EVCTRL_EVACT_0 0 +#endif + +// </h> + +// </e> + +// <e> PORT Input Event 1 configuration +// <id> enable_port_input_event_1 +#ifndef CONF_PORT_EVCTRL_PORT_1 +#define CONF_PORT_EVCTRL_PORT_1 0 +#endif + +// <h> PORT Input Event 1 configuration on PORT A + +// <q> PORTA Input Event 1 Enable +// <i> The event action will be triggered on any incoming event if PORT A Input Event 1 configuration is enabled +// <id> porta_input_event_enable_1 +#ifndef CONF_PORTA_EVCTRL_PORTEI_1 +#define CONF_PORTA_EVCTRL_PORTEI_1 0x0 +#endif + +// <o> PORTA Event 1 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port A on which the event action will be performed +// <id> porta_event_pin_identifier_1 +#ifndef CONF_PORTA_EVCTRL_PID_1 +#define CONF_PORTA_EVCTRL_PID_1 0x0 +#endif + +// <o> PORTA Event 1 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT A will perform on event input 1 +// <id> porta_event_action_1 +#ifndef CONF_PORTA_EVCTRL_EVACT_1 +#define CONF_PORTA_EVCTRL_EVACT_1 0 +#endif + +// </h> +// <h> PORT Input Event 1 configuration on PORT B + +// <q> PORTB Input Event 1 Enable +// <i> The event action will be triggered on any incoming event if PORT B Input Event 1 configuration is enabled +// <id> portb_input_event_enable_1 +#ifndef CONF_PORTB_EVCTRL_PORTEI_1 +#define CONF_PORTB_EVCTRL_PORTEI_1 0x0 +#endif + +// <o> PORTB Event 1 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port B on which the event action will be performed +// <id> portb_event_pin_identifier_1 +#ifndef CONF_PORTB_EVCTRL_PID_1 +#define CONF_PORTB_EVCTRL_PID_1 0x0 +#endif + +// <o> PORTB Event 1 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT B will perform on event input 1 +// <id> portb_event_action_1 +#ifndef CONF_PORTB_EVCTRL_EVACT_1 +#define CONF_PORTB_EVCTRL_EVACT_1 0 +#endif + +// </h> +// <h> PORT Input Event 1 configuration on PORT C + +// <q> PORTC Input Event 1 Enable +// <i> The event action will be triggered on any incoming event if PORT C Input Event 1 configuration is enabled +// <id> portc_input_event_enable_1 +#ifndef CONF_PORTC_EVCTRL_PORTEI_1 +#define CONF_PORTC_EVCTRL_PORTEI_1 0x0 +#endif + +// <o> PORTC Event 1 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port C on which the event action will be performed +// <id> portc_event_pin_identifier_1 +#ifndef CONF_PORTC_EVCTRL_PID_1 +#define CONF_PORTC_EVCTRL_PID_1 0x0 +#endif + +// <o> PORTC Event 1 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT C will perform on event input 1 +// <id> portc_event_action_1 +#ifndef CONF_PORTC_EVCTRL_EVACT_1 +#define CONF_PORTC_EVCTRL_EVACT_1 0 +#endif + +// </h> +// <h> PORT Input Event 1 configuration on PORT D + +// <q> PORTD Input Event 1 Enable +// <i> The event action will be triggered on any incoming event if PORT D Input Event 1 configuration is enabled +// <id> portd_input_event_enable_1 +#ifndef CONF_PORTD_EVCTRL_PORTEI_1 +#define CONF_PORTD_EVCTRL_PORTEI_1 0x0 +#endif + +// <o> PORTD Event 1 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port D on which the event action will be performed +// <id> portd_event_pin_identifier_1 +#ifndef CONF_PORTD_EVCTRL_PID_1 +#define CONF_PORTD_EVCTRL_PID_1 0x0 +#endif + +// <o> PORTD Event 1 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT D will perform on event input 1 +// <id> portd_event_action_1 +#ifndef CONF_PORTD_EVCTRL_EVACT_1 +#define CONF_PORTD_EVCTRL_EVACT_1 0 +#endif + +// </h> + +// </e> + +// <e> PORT Input Event 2 configuration +// <id> enable_port_input_event_2 +#ifndef CONF_PORT_EVCTRL_PORT_2 +#define CONF_PORT_EVCTRL_PORT_2 0 +#endif + +// <h> PORT Input Event 2 configuration on PORT A + +// <q> PORTA Input Event 2 Enable +// <i> The event action will be triggered on any incoming event if PORT A Input Event 2 configuration is enabled +// <id> porta_input_event_enable_2 +#ifndef CONF_PORTA_EVCTRL_PORTEI_2 +#define CONF_PORTA_EVCTRL_PORTEI_2 0x0 +#endif + +// <o> PORTA Event 2 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port A on which the event action will be performed +// <id> porta_event_pin_identifier_2 +#ifndef CONF_PORTA_EVCTRL_PID_2 +#define CONF_PORTA_EVCTRL_PID_2 0x0 +#endif + +// <o> PORTA Event 2 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT A will perform on event input 2 +// <id> porta_event_action_2 +#ifndef CONF_PORTA_EVCTRL_EVACT_2 +#define CONF_PORTA_EVCTRL_EVACT_2 0 +#endif + +// </h> +// <h> PORT Input Event 2 configuration on PORT B + +// <q> PORTB Input Event 2 Enable +// <i> The event action will be triggered on any incoming event if PORT B Input Event 2 configuration is enabled +// <id> portb_input_event_enable_2 +#ifndef CONF_PORTB_EVCTRL_PORTEI_2 +#define CONF_PORTB_EVCTRL_PORTEI_2 0x0 +#endif + +// <o> PORTB Event 2 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port B on which the event action will be performed +// <id> portb_event_pin_identifier_2 +#ifndef CONF_PORTB_EVCTRL_PID_2 +#define CONF_PORTB_EVCTRL_PID_2 0x0 +#endif + +// <o> PORTB Event 2 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT B will perform on event input 2 +// <id> portb_event_action_2 +#ifndef CONF_PORTB_EVCTRL_EVACT_2 +#define CONF_PORTB_EVCTRL_EVACT_2 0 +#endif + +// </h> +// <h> PORT Input Event 2 configuration on PORT C + +// <q> PORTC Input Event 2 Enable +// <i> The event action will be triggered on any incoming event if PORT C Input Event 2 configuration is enabled +// <id> portc_input_event_enable_2 +#ifndef CONF_PORTC_EVCTRL_PORTEI_2 +#define CONF_PORTC_EVCTRL_PORTEI_2 0x0 +#endif + +// <o> PORTC Event 2 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port C on which the event action will be performed +// <id> portc_event_pin_identifier_2 +#ifndef CONF_PORTC_EVCTRL_PID_2 +#define CONF_PORTC_EVCTRL_PID_2 0x0 +#endif + +// <o> PORTC Event 2 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT C will perform on event input 2 +// <id> portc_event_action_2 +#ifndef CONF_PORTC_EVCTRL_EVACT_2 +#define CONF_PORTC_EVCTRL_EVACT_2 0 +#endif + +// </h> +// <h> PORT Input Event 2 configuration on PORT D + +// <q> PORTD Input Event 2 Enable +// <i> The event action will be triggered on any incoming event if PORT D Input Event 2 configuration is enabled +// <id> portd_input_event_enable_2 +#ifndef CONF_PORTD_EVCTRL_PORTEI_2 +#define CONF_PORTD_EVCTRL_PORTEI_2 0x0 +#endif + +// <o> PORTD Event 2 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port D on which the event action will be performed +// <id> portd_event_pin_identifier_2 +#ifndef CONF_PORTD_EVCTRL_PID_2 +#define CONF_PORTD_EVCTRL_PID_2 0x0 +#endif + +// <o> PORTD Event 2 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT D will perform on event input 2 +// <id> portd_event_action_2 +#ifndef CONF_PORTD_EVCTRL_EVACT_2 +#define CONF_PORTD_EVCTRL_EVACT_2 0 +#endif + +// </h> + +// </e> + +// <e> PORT Input Event 3 configuration +// <id> enable_port_input_event_3 +#ifndef CONF_PORT_EVCTRL_PORT_3 +#define CONF_PORT_EVCTRL_PORT_3 0 +#endif + +// <h> PORT Input Event 3 configuration on PORT A + +// <q> PORTA Input Event 3 Enable +// <i> The event action will be triggered on any incoming event if PORT A Input Event 3 configuration is enabled +// <id> porta_input_event_enable_3 +#ifndef CONF_PORTA_EVCTRL_PORTEI_3 +#define CONF_PORTA_EVCTRL_PORTEI_3 0x0 +#endif + +// <o> PORTA Event 3 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port A on which the event action will be performed +// <id> porta_event_pin_identifier_3 +#ifndef CONF_PORTA_EVCTRL_PID_3 +#define CONF_PORTA_EVCTRL_PID_3 0x0 +#endif + +// <o> PORTA Event 3 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT A will perform on event input 3 +// <id> porta_event_action_3 +#ifndef CONF_PORTA_EVCTRL_EVACT_3 +#define CONF_PORTA_EVCTRL_EVACT_3 0 +#endif + +// </h> +// <h> PORT Input Event 3 configuration on PORT B + +// <q> PORTB Input Event 3 Enable +// <i> The event action will be triggered on any incoming event if PORT B Input Event 3 configuration is enabled +// <id> portb_input_event_enable_3 +#ifndef CONF_PORTB_EVCTRL_PORTEI_3 +#define CONF_PORTB_EVCTRL_PORTEI_3 0x0 +#endif + +// <o> PORTB Event 3 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port B on which the event action will be performed +// <id> portb_event_pin_identifier_3 +#ifndef CONF_PORTB_EVCTRL_PID_3 +#define CONF_PORTB_EVCTRL_PID_3 0x0 +#endif + +// <o> PORTB Event 3 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT B will perform on event input 3 +// <id> portb_event_action_3 +#ifndef CONF_PORTB_EVCTRL_EVACT_3 +#define CONF_PORTB_EVCTRL_EVACT_3 0 +#endif + +// </h> +// <h> PORT Input Event 3 configuration on PORT C + +// <q> PORTC Input Event 3 Enable +// <i> The event action will be triggered on any incoming event if PORT C Input Event 3 configuration is enabled +// <id> portc_input_event_enable_3 +#ifndef CONF_PORTC_EVCTRL_PORTEI_3 +#define CONF_PORTC_EVCTRL_PORTEI_3 0x0 +#endif + +// <o> PORTC Event 3 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port C on which the event action will be performed +// <id> portc_event_pin_identifier_3 +#ifndef CONF_PORTC_EVCTRL_PID_3 +#define CONF_PORTC_EVCTRL_PID_3 0x0 +#endif + +// <o> PORTC Event 3 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT C will perform on event input 3 +// <id> portc_event_action_3 +#ifndef CONF_PORTC_EVCTRL_EVACT_3 +#define CONF_PORTC_EVCTRL_EVACT_3 0 +#endif + +// </h> +// <h> PORT Input Event 3 configuration on PORT D + +// <q> PORTD Input Event 3 Enable +// <i> The event action will be triggered on any incoming event if PORT D Input Event 3 configuration is enabled +// <id> portd_input_event_enable_3 +#ifndef CONF_PORTD_EVCTRL_PORTEI_3 +#define CONF_PORTD_EVCTRL_PORTEI_3 0x0 +#endif + +// <o> PORTD Event 3 Pin Identifier <0x00-0x1F> +// <i> These bits define the I/O pin from port D on which the event action will be performed +// <id> portd_event_pin_identifier_3 +#ifndef CONF_PORTD_EVCTRL_PID_3 +#define CONF_PORTD_EVCTRL_PID_3 0x0 +#endif + +// <o> PORTD Event 3 Action +// <0=> Output register of pin will be set to level of event +// <1=> Set output register of pin on event +// <2=> Clear output register of pin on event +// <3=> Toggle output register of pin on event +// <i> These bits define the event action the PORT D will perform on event input 3 +// <id> portd_event_action_3 +#ifndef CONF_PORTD_EVCTRL_EVACT_3 +#define CONF_PORTD_EVCTRL_EVACT_3 0 +#endif + +// </h> + +// </e> + +#define CONF_PORTA_EVCTRL \ + (0 | PORT_EVCTRL_EVACT0(CONF_PORTA_EVCTRL_EVACT_0) | CONF_PORTA_EVCTRL_PORTEI_0 << PORT_EVCTRL_PORTEI0_Pos \ + | PORT_EVCTRL_PID0(CONF_PORTA_EVCTRL_PID_0) | PORT_EVCTRL_EVACT1(CONF_PORTA_EVCTRL_EVACT_1) \ + | CONF_PORTA_EVCTRL_PORTEI_1 << PORT_EVCTRL_PORTEI1_Pos | PORT_EVCTRL_PID1(CONF_PORTA_EVCTRL_PID_1) \ + | PORT_EVCTRL_EVACT2(CONF_PORTA_EVCTRL_EVACT_2) | CONF_PORTA_EVCTRL_PORTEI_2 << PORT_EVCTRL_PORTEI2_Pos \ + | PORT_EVCTRL_PID2(CONF_PORTA_EVCTRL_PID_2) | PORT_EVCTRL_EVACT3(CONF_PORTA_EVCTRL_EVACT_3) \ + | CONF_PORTA_EVCTRL_PORTEI_3 << PORT_EVCTRL_PORTEI3_Pos | PORT_EVCTRL_PID3(CONF_PORTA_EVCTRL_PID_3)) +#define CONF_PORTB_EVCTRL \ + (0 | PORT_EVCTRL_EVACT0(CONF_PORTB_EVCTRL_EVACT_0) | CONF_PORTB_EVCTRL_PORTEI_0 << PORT_EVCTRL_PORTEI0_Pos \ + | PORT_EVCTRL_PID0(CONF_PORTB_EVCTRL_PID_0) | PORT_EVCTRL_EVACT1(CONF_PORTB_EVCTRL_EVACT_1) \ + | CONF_PORTB_EVCTRL_PORTEI_1 << PORT_EVCTRL_PORTEI1_Pos | PORT_EVCTRL_PID1(CONF_PORTB_EVCTRL_PID_1) \ + | PORT_EVCTRL_EVACT2(CONF_PORTB_EVCTRL_EVACT_2) | CONF_PORTB_EVCTRL_PORTEI_2 << PORT_EVCTRL_PORTEI2_Pos \ + | PORT_EVCTRL_PID2(CONF_PORTB_EVCTRL_PID_2) | PORT_EVCTRL_EVACT3(CONF_PORTB_EVCTRL_EVACT_3) \ + | CONF_PORTB_EVCTRL_PORTEI_3 << PORT_EVCTRL_PORTEI3_Pos | PORT_EVCTRL_PID3(CONF_PORTB_EVCTRL_PID_3)) +#define CONF_PORTC_EVCTRL \ + (0 | PORT_EVCTRL_EVACT0(CONF_PORTC_EVCTRL_EVACT_0) | CONF_PORTC_EVCTRL_PORTEI_0 << PORT_EVCTRL_PORTEI0_Pos \ + | PORT_EVCTRL_PID0(CONF_PORTC_EVCTRL_PID_0) | PORT_EVCTRL_EVACT1(CONF_PORTC_EVCTRL_EVACT_1) \ + | CONF_PORTC_EVCTRL_PORTEI_1 << PORT_EVCTRL_PORTEI1_Pos | PORT_EVCTRL_PID1(CONF_PORTC_EVCTRL_PID_1) \ + | PORT_EVCTRL_EVACT2(CONF_PORTC_EVCTRL_EVACT_2) | CONF_PORTC_EVCTRL_PORTEI_2 << PORT_EVCTRL_PORTEI2_Pos \ + | PORT_EVCTRL_PID2(CONF_PORTC_EVCTRL_PID_2) | PORT_EVCTRL_EVACT3(CONF_PORTC_EVCTRL_EVACT_3) \ + | CONF_PORTC_EVCTRL_PORTEI_3 << PORT_EVCTRL_PORTEI3_Pos | PORT_EVCTRL_PID3(CONF_PORTC_EVCTRL_PID_3)) +#define CONF_PORTD_EVCTRL \ + (0 | PORT_EVCTRL_EVACT0(CONF_PORTD_EVCTRL_EVACT_0) | CONF_PORTD_EVCTRL_PORTEI_0 << PORT_EVCTRL_PORTEI0_Pos \ + | PORT_EVCTRL_PID0(CONF_PORTD_EVCTRL_PID_0) | PORT_EVCTRL_EVACT1(CONF_PORTD_EVCTRL_EVACT_1) \ + | CONF_PORTD_EVCTRL_PORTEI_1 << PORT_EVCTRL_PORTEI1_Pos | PORT_EVCTRL_PID1(CONF_PORTD_EVCTRL_PID_1) \ + | PORT_EVCTRL_EVACT2(CONF_PORTD_EVCTRL_EVACT_2) | CONF_PORTD_EVCTRL_PORTEI_2 << PORT_EVCTRL_PORTEI2_Pos \ + | PORT_EVCTRL_PID2(CONF_PORTD_EVCTRL_PID_2) | PORT_EVCTRL_EVACT3(CONF_PORTD_EVCTRL_EVACT_3) \ + | CONF_PORTD_EVCTRL_PORTEI_3 << PORT_EVCTRL_PORTEI3_Pos | PORT_EVCTRL_PID3(CONF_PORTD_EVCTRL_PID_3)) + +// <<< end of configuration section >>> + +#endif // HPL_PORT_CONFIG_H diff --git a/config/hpl_usb_config.h b/config/hpl_usb_config.h new file mode 100644 index 0000000..02439a3 --- /dev/null +++ b/config/hpl_usb_config.h @@ -0,0 +1,355 @@ +/* Auto-generated config file hpl_usb_config.h */ +#ifndef HPL_USB_CONFIG_H +#define HPL_USB_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#define CONF_USB_N_0 0 +#define CONF_USB_N_1 1 +#define CONF_USB_N_2 2 +#define CONF_USB_N_3 3 +#define CONF_USB_N_4 4 +#define CONF_USB_N_5 5 +#define CONF_USB_N_6 6 +#define CONF_USB_N_7 7 +#define CONF_USB_N_8 8 +#define CONF_USB_N_9 9 +#define CONF_USB_N_10 10 +#define CONF_USB_N_11 11 +#define CONF_USB_N_12 12 +#define CONF_USB_N_13 13 +#define CONF_USB_N_14 14 +#define CONF_USB_N_15 15 + +#define CONF_USB_D_EP_N_MAX (USB_EPT_NUM - 1) +#define CONF_USB_D_N_EP_MAX (CONF_USB_D_EP_N_MAX * 2 - 1) + +// <h> USB Device HAL Configuration + +// <y> Max number of endpoints supported +// <i> Limits the number of endpoints (described by EP address) can be used in app. +// <CONF_USB_N_1"> 1 (EP0 only) +// <CONF_USB_N_2"> 2 (EP0 + 1 endpoint) +// <CONF_USB_N_3"> 3 (EP0 + 2 endpoints) +// <CONF_USB_N_4"> 4 (EP0 + 3 endpoints) +// <CONF_USB_N_5"> 5 (EP0 + 4 endpoints) +// <CONF_USB_N_6"> 6 (EP0 + 5 endpoints) +// <CONF_USB_N_7"> 7 (EP0 + 6 endpoints) +// <CONF_USB_N_8"> 8 (EP0 + 7 endpoints) +// <CONF_USB_D_N_EP_MAX"> Max possible (by "Max Endpoint Number" config) +// <id> usbd_num_ep_sp +#ifndef CONF_USB_D_NUM_EP_SP +#define CONF_USB_D_NUM_EP_SP CONF_USB_D_N_EP_MAX +#endif + +// </h> + +// <y> Max Endpoint Number supported +// <i> Limits the max endpoint number. +// <i> USB endpoint address is constructed by direction and endpoint number. Bit 8 of address set indicates the direction is IN. E.g., EP0x81 and EP0x01 have the same endpoint number, 1. +// <i> Reduce the value according to specific device design, to cut-off memory usage. +// <CONF_USB_N_0"> 0 (only EP0) +// <CONF_USB_N_1"> 1 (EP 0x81 or 0x01) +// <CONF_USB_N_2"> 2 (EP 0x82 or 0x02) +// <CONF_USB_N_3"> 3 (EP 0x83 or 0x03) +// <CONF_USB_N_4"> 4 (EP 0x84 or 0x04) +// <CONF_USB_N_5"> 5 (EP 0x85 or 0x05) +// <CONF_USB_N_6"> 6 (EP 0x86 or 0x06) +// <CONF_USB_N_7"> 7 (EP 0x87 or 0x07) +// <CONF_USB_EP_N_MAX"> Max possible (by HW) +// <i> The number of physical endpoints - 1 +// <id> usbd_arch_max_ep_n +#ifndef CONF_USB_D_MAX_EP_N +#define CONF_USB_D_MAX_EP_N CONF_USB_N_2 +#endif + +// <y> USB Speed Limit +// <i> Limits the working speed of the device. +// <USB_SPEED_FS"> Full speed +// <USB_SPEED_LS"> Low Speed +// <id> usbd_arch_speed +#ifndef CONF_USB_D_SPEED +#define CONF_USB_D_SPEED USB_SPEED_FS +#endif + +// <o> Cache buffer size for EP0 +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> EP0 is default control endpoint, so cache must be used to be able to receive SETUP packet at any time. +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <id> usb_arch_ep0_cache +#ifndef CONF_USB_EP0_CACHE +#define CONF_USB_EP0_CACHE 64 +#endif + +// <h> Cache configuration EP1 +// <o> Cache buffer size for EP1 OUT +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_arch_ep1_cache +#ifndef CONF_USB_EP1_CACHE +#define CONF_USB_EP1_CACHE 64 +#endif + +// <o> Cache buffer size for EP1 IN +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must not be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_ep1_I_CACHE +#ifndef CONF_USB_EP1_I_CACHE +#define CONF_USB_EP1_I_CACHE 0 +#endif +// </h> + +// <h> Cache configuration EP2 +// <o> Cache buffer size for EP2 OUT +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_arch_ep2_cache +#ifndef CONF_USB_EP2_CACHE +#define CONF_USB_EP2_CACHE 64 +#endif + +// <o> Cache buffer size for EP2 IN +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must not be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_ep2_I_CACHE +#ifndef CONF_USB_EP2_I_CACHE +#define CONF_USB_EP2_I_CACHE 0 +#endif +// </h> + +// <h> Cache configuration EP3 +// <o> Cache buffer size for EP3 OUT +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_arch_ep3_cache +#ifndef CONF_USB_EP3_CACHE +#define CONF_USB_EP3_CACHE 64 +#endif + +// <o> Cache buffer size for EP3 IN +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must not be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_ep3_I_CACHE +#ifndef CONF_USB_EP3_I_CACHE +#define CONF_USB_EP3_I_CACHE 0 +#endif +// </h> + +// <h> Cache configuration EP4 +// <o> Cache buffer size for EP4 OUT +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_arch_ep4_cache +#ifndef CONF_USB_EP4_CACHE +#define CONF_USB_EP4_CACHE 64 +#endif + +// <o> Cache buffer size for EP4 IN +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must not be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_ep4_I_CACHE +#ifndef CONF_USB_EP4_I_CACHE +#define CONF_USB_EP4_I_CACHE 0 +#endif +// </h> + +// <h> Cache configuration EP5 +// <o> Cache buffer size for EP5 OUT +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_arch_ep5_cache +#ifndef CONF_USB_EP5_CACHE +#define CONF_USB_EP5_CACHE 64 +#endif + +// <o> Cache buffer size for EP5 IN +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must not be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_ep5_I_CACHE +#ifndef CONF_USB_EP5_I_CACHE +#define CONF_USB_EP5_I_CACHE 0 +#endif +// </h> + +// <h> Cache configuration EP6 +// <o> Cache buffer size for EP6 OUT +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_arch_ep6_cache +#ifndef CONF_USB_EP6_CACHE +#define CONF_USB_EP6_CACHE 64 +#endif + +// <o> Cache buffer size for EP6 IN +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must not be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_ep6_I_CACHE +#ifndef CONF_USB_EP6_I_CACHE +#define CONF_USB_EP6_I_CACHE 0 +#endif +// </h> + +// <h> Cache configuration EP7 +// <o> Cache buffer size for EP7 OUT +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_arch_ep7_cache +#ifndef CONF_USB_EP7_CACHE +#define CONF_USB_EP7_CACHE 64 +#endif + +// <o> Cache buffer size for EP7 IN +// <i> Cache is used because the USB hardware always uses DMA which requires specific memory feature. +// <i> This cache must not be allocated if you plan to use the endpoint as control endpoint. +// <i> No cache means IN transaction not support data buffer outside of RAM, OUT transaction not support unaligned buffer and buffer size less than endpoint max packet size +// <0=> No cache +// <8=> Cached by 8 bytes buffer +// <16=> Cached by 16 bytes buffer +// <32=> Cached by 32 bytes buffer +// <64=> Cached by 64 bytes buffer +// <128=> Cached by 128 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <256=> Cached by 256 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <512=> Cached by 512 bytes buffer (HS Bulk or interrupt or isochronous EP) +// <1024=> Cached by 1024 bytes buffer (interrupt or isochronous EP) +// <id> usb_ep7_I_CACHE +#ifndef CONF_USB_EP7_I_CACHE +#define CONF_USB_EP7_I_CACHE 0 +#endif +// </h> + +// <<< end of configuration section >>> + +#endif // HPL_USB_CONFIG_H diff --git a/config/peripheral_clk_config.h b/config/peripheral_clk_config.h new file mode 100644 index 0000000..9a9c30f --- /dev/null +++ b/config/peripheral_clk_config.h @@ -0,0 +1,58 @@ +/* Auto-generated config file peripheral_clk_config.h */ +#ifndef PERIPHERAL_CLK_CONFIG_H +#define PERIPHERAL_CLK_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +/** + * \def CONF_CPU_FREQUENCY + * \brief CPU's Clock frequency + */ +#ifndef CONF_CPU_FREQUENCY +#define CONF_CPU_FREQUENCY 12000000 +#endif + +// <y> USB Clock Source +// <id> usb_gclk_selection + +// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0 + +// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1 + +// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2 + +// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3 + +// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4 + +// <GCLK_PCHCTRL_GEN_GCLK5_Val"> Generic clock generator 5 + +// <GCLK_PCHCTRL_GEN_GCLK6_Val"> Generic clock generator 6 + +// <GCLK_PCHCTRL_GEN_GCLK7_Val"> Generic clock generator 7 + +// <GCLK_PCHCTRL_GEN_GCLK8_Val"> Generic clock generator 8 + +// <GCLK_PCHCTRL_GEN_GCLK9_Val"> Generic clock generator 9 + +// <GCLK_PCHCTRL_GEN_GCLK10_Val"> Generic clock generator 10 + +// <GCLK_PCHCTRL_GEN_GCLK11_Val"> Generic clock generator 11 + +// <i> Select the clock source for USB. +#ifndef CONF_GCLK_USB_SRC +#define CONF_GCLK_USB_SRC GCLK_PCHCTRL_GEN_GCLK1_Val + +#endif + +/** + * \def CONF_GCLK_USB_FREQUENCY + * \brief USB's Clock frequency + */ +#ifndef CONF_GCLK_USB_FREQUENCY +#define CONF_GCLK_USB_FREQUENCY 48000000 +#endif + +// <<< end of configuration section >>> + +#endif // PERIPHERAL_CLK_CONFIG_H diff --git a/config/usbd_config.h b/config/usbd_config.h new file mode 100644 index 0000000..e8334ec --- /dev/null +++ b/config/usbd_config.h @@ -0,0 +1,342 @@ +/* Auto-generated config file usbd_config.h */ +#ifndef USBD_CONFIG_H +#define USBD_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// ---- USB Device Stack Core Options ---- + +// <q> High Speed Support +// <i> Enable high speed specific descriptors support, e.g., DeviceQualifierDescriptor and OtherSpeedConfiguration Descriptor. +// <i> High speed support require descriptors description array on start, for LS/FS and HS support in first and second place. +// <id> usbd_hs_sp +#ifndef CONF_USBD_HS_SP +#define CONF_USBD_HS_SP 0 +#endif + +// ---- USB Device Stack CDC ACM Options ---- + +// <e> Enable String Descriptors +// <id> usb_cdcd_acm_str_en +#ifndef CONF_USB_CDCD_ACM_STR_EN +#define CONF_USB_CDCD_ACM_STR_EN 0 +#endif +// <s> Language IDs +// <i> Language IDs in c format, split by comma (E.g., 0x0409 ...) +// <id> usb_cdcd_acm_langid +#ifndef CONF_USB_CDCD_ACM_LANGID +#define CONF_USB_CDCD_ACM_LANGID "0x0409" +#endif + +#ifndef CONF_USB_CDCD_ACM_LANGID_DESC +#define CONF_USB_CDCD_ACM_LANGID_DESC +#endif +// </e> + +// <h> CDC ACM Device Descriptor + +// <o> bcdUSB +// <0x0200=> USB 2.0 version +// <0x0210=> USB 2.1 version +// <id> usb_cdcd_acm_bcdusb +#ifndef CONF_USB_CDCD_ACM_BCDUSB +#define CONF_USB_CDCD_ACM_BCDUSB 0x200 +#endif + +// <o> bMaxPackeSize0 +// <0x0008=> 8 bytes +// <0x0010=> 16 bytes +// <0x0020=> 32 bytes +// <0x0040=> 64 bytes +// <id> usb_cdcd_acm_bmaxpksz0 +#ifndef CONF_USB_CDCD_ACM_BMAXPKSZ0 +#define CONF_USB_CDCD_ACM_BMAXPKSZ0 0x40 +#endif + +// <o> idVender <0x0000-0xFFFF> +// <id> usb_cdcd_acm_idvender +#ifndef CONF_USB_CDCD_ACM_IDVENDER +#define CONF_USB_CDCD_ACM_IDVENDER 0x3eb +#endif + +// <o> idProduct <0x0000-0xFFFF> +// <id> usb_cdcd_acm_idproduct +#ifndef CONF_USB_CDCD_ACM_IDPRODUCT +#define CONF_USB_CDCD_ACM_IDPRODUCT 0x2404 +#endif + +// <o> bcdDevice <0x0000-0xFFFF> +// <id> usb_cdcd_acm_bcddevice +#ifndef CONF_USB_CDCD_ACM_BCDDEVICE +#define CONF_USB_CDCD_ACM_BCDDEVICE 0x100 +#endif + +// <e> Enable string descriptor of iManufact +// <id> usb_cdcd_acm_imanufact_en +#ifndef CONF_USB_CDCD_ACM_IMANUFACT_EN +#define CONF_USB_CDCD_ACM_IMANUFACT_EN 0 +#endif + +#ifndef CONF_USB_CDCD_ACM_IMANUFACT +#define CONF_USB_CDCD_ACM_IMANUFACT (CONF_USB_CDCD_ACM_IMANUFACT_EN * (CONF_USB_CDCD_ACM_IMANUFACT_EN)) +#endif + +// <s> Unicode string of iManufact +// <id> usb_cdcd_acm_imanufact_str +#ifndef CONF_USB_CDCD_ACM_IMANUFACT_STR +#define CONF_USB_CDCD_ACM_IMANUFACT_STR "Atmel" +#endif + +#ifndef CONF_USB_CDCD_ACM_IMANUFACT_STR_DESC +#define CONF_USB_CDCD_ACM_IMANUFACT_STR_DESC +#endif + +// </e> + +// <e> Enable string descriptor of iProduct +// <id> usb_cdcd_acm_iproduct_en +#ifndef CONF_USB_CDCD_ACM_IPRODUCT_EN +#define CONF_USB_CDCD_ACM_IPRODUCT_EN 0 +#endif + +#ifndef CONF_USB_CDCD_ACM_IPRODUCT +#define CONF_USB_CDCD_ACM_IPRODUCT \ + (CONF_USB_CDCD_ACM_IPRODUCT_EN * (CONF_USB_CDCD_ACM_IMANUFACT_EN + CONF_USB_CDCD_ACM_IPRODUCT_EN)) +#endif + +// <s> Unicode string of iProduct +// <id> usb_cdcd_acm_iproduct_str +#ifndef CONF_USB_CDCD_ACM_IPRODUCT_STR +#define CONF_USB_CDCD_ACM_IPRODUCT_STR "CDC ACM Serial Bridge Demo" +#endif + +#ifndef CONF_USB_CDCD_ACM_IPRODUCT_STR_DESC +#define CONF_USB_CDCD_ACM_IPRODUCT_STR_DESC +#endif + +// </e> + +// <e> Enable string descriptor of iSerialNum +// <id> usb_cdcd_acm_iserialnum_en +#ifndef CONF_USB_CDCD_ACM_ISERIALNUM_EN +#define CONF_USB_CDCD_ACM_ISERIALNUM_EN 0 +#endif + +#ifndef CONF_USB_CDCD_ACM_ISERIALNUM +#define CONF_USB_CDCD_ACM_ISERIALNUM \ + (CONF_USB_CDCD_ACM_ISERIALNUM_EN \ + * (CONF_USB_CDCD_ACM_IMANUFACT_EN + CONF_USB_CDCD_ACM_IPRODUCT_EN + CONF_USB_CDCD_ACM_ISERIALNUM_EN)) +#endif + +// <s> Unicode string of iSerialNum +// <id> usb_cdcd_acm_iserialnum_str +#ifndef CONF_USB_CDCD_ACM_ISERIALNUM_STR +#define CONF_USB_CDCD_ACM_ISERIALNUM_STR "123456789ABCDEF" +#endif + +#ifndef CONF_USB_CDCD_ACM_ISERIALNUM_STR_DESC +#define CONF_USB_CDCD_ACM_ISERIALNUM_STR_DESC +#endif + +// </e> + +// <o> bNumConfigurations <0x01-0xFF> +// <id> usb_cdcd_acm_bnumconfig +#ifndef CONF_USB_CDCD_ACM_BNUMCONFIG +#define CONF_USB_CDCD_ACM_BNUMCONFIG 0x1 +#endif + +// </h> + +// <h> CDC ACM Configuration Descriptor +// <o> bConfigurationValue <0x01-0xFF> +// <id> usb_cdcd_acm_bconfigval +#ifndef CONF_USB_CDCD_ACM_BCONFIGVAL +#define CONF_USB_CDCD_ACM_BCONFIGVAL 0x1 +#endif +// <e> Enable string descriptor of iConfig +// <id> usb_cdcd_acm_iconfig_en +#ifndef CONF_USB_CDCD_ACM_ICONFIG_EN +#define CONF_USB_CDCD_ACM_ICONFIG_EN 0 +#endif + +#ifndef CONF_USB_CDCD_ACM_ICONFIG +#define CONF_USB_CDCD_ACM_ICONFIG \ + (CONF_USB_CDCD_ACM_ICONFIG_EN \ + * (CONF_USB_CDCD_ACM_IMANUFACT_EN + CONF_USB_CDCD_ACM_IPRODUCT_EN + CONF_USB_CDCD_ACM_ISERIALNUM_EN \ + + CONF_USB_CDCD_ACM_ICONFIG_EN)) +#endif + +// <s> Unicode string of iConfig +// <id> usb_cdcd_acm_iconfig_str +#ifndef CONF_USB_CDCD_ACM_ICONFIG_STR +#define CONF_USB_CDCD_ACM_ICONFIG_STR "" +#endif + +#ifndef CONF_USB_CDCD_ACM_ICONFIG_STR_DESC +#define CONF_USB_CDCD_ACM_ICONFIG_STR_DESC +#endif + +// </e> + +// <o> bmAttributes +// <0x80=> Bus power supply, not support for remote wakeup +// <0xA0=> Bus power supply, support for remote wakeup +// <0xC0=> Self powered, not support for remote wakeup +// <0xE0=> Self powered, support for remote wakeup +// <id> usb_cdcd_acm_bmattri +#ifndef CONF_USB_CDCD_ACM_BMATTRI +#define CONF_USB_CDCD_ACM_BMATTRI 0x80 +#endif + +// <o> bMaxPower <0x00-0xFF> +// <id> usb_cdcd_acm_bmaxpower +#ifndef CONF_USB_CDCD_ACM_BMAXPOWER +#define CONF_USB_CDCD_ACM_BMAXPOWER 0x32 +#endif +// </h> + +// <h> CDC ACM Communication Interface Descriptor + +// <o> bInterfaceNumber <0x00-0xFF> +// <id> usb_cdcd_acm_comm_bifcnum +#ifndef CONF_USB_CDCD_ACM_COMM_BIFCNUM +#define CONF_USB_CDCD_ACM_COMM_BIFCNUM 0x0 +#endif +// <o> bAlternateSetting <0x00-0xFF> +// <id> usb_cdcd_acm_comm_baltset +#ifndef CONF_USB_CDCD_ACM_COMM_BALTSET +#define CONF_USB_CDCD_ACM_COMM_BALTSET 0x0 +#endif + +// <o> iInterface <0x00-0xFF> +// <id> usb_cdcd_acm_comm_iifc +#ifndef CONF_USB_CDCD_ACM_COMM_IIFC +#define CONF_USB_CDCD_ACM_COMM_IIFC 0x0 +#endif + +// <o> Interrupt IN Endpoint Address +// <0x81=> EndpointAddress = 0x81 +// <0x82=> EndpointAddress = 0x82 +// <0x83=> EndpointAddress = 0x83 +// <0x84=> EndpointAddress = 0x84 +// <0x85=> EndpointAddress = 0x85 +// <0x86=> EndpointAddress = 0x86 +// <0x87=> EndpointAddress = 0x87 +// <id> usb_cdcd_acm_epaddr +#ifndef CONF_USB_CDCD_ACM_COMM_INT_EPADDR +#define CONF_USB_CDCD_ACM_COMM_INT_EPADDR 0x82 +#endif + +// <o> Interrupt IN Endpoint wMaxPacketSize +// <0x0008=> 8 bytes +// <0x0010=> 16 bytes +// <0x0020=> 32 bytes +// <0x0040=> 64 bytes +// <id> usb_cdcd_acm_comm_int_maxpksz +#ifndef CONF_USB_CDCD_ACM_COMM_INT_MAXPKSZ +#define CONF_USB_CDCD_ACM_COMM_INT_MAXPKSZ 0x40 +#endif + +// <o> Interrupt IN Endpoint Interval <0x00-0xFF> +// <id> usb_cdcd_acm_comm_int_interval +#ifndef CONF_USB_CDCD_ACM_COMM_INT_INTERVAL +#define CONF_USB_CDCD_ACM_COMM_INT_INTERVAL 0xa +#endif +// </h> + +// <h> CDC ACM Data Interface Descriptor + +// <o> bInterfaceNumber <0x00-0xFF> +// <id> usb_cdcd_acm_data_bifcnum +#ifndef CONF_USB_CDCD_ACM_DATA_BIFCNUM +#define CONF_USB_CDCD_ACM_DATA_BIFCNUM 0x1 +#endif +// <o> bAlternateSetting <0x00-0xFF> +// <id> usb_cdcd_acm_data_baltset +#ifndef CONF_USB_CDCD_ACM_DATA_BALTSET +#define CONF_USB_CDCD_ACM_DATA_BALTSET 0x0 +#endif + +// <o> iInterface <0x00-0xFF> +// <id> usb_cdcd_acm_data_iifc +#ifndef CONF_USB_CDCD_ACM_DATA_IIFC +#define CONF_USB_CDCD_ACM_DATA_IIFC 0x0 +#endif + +// <o> BULK IN Endpoint Address +// <0x81=> EndpointAddress = 0x81 +// <0x82=> EndpointAddress = 0x82 +// <0x83=> EndpointAddress = 0x83 +// <0x84=> EndpointAddress = 0x84 +// <0x85=> EndpointAddress = 0x85 +// <0x86=> EndpointAddress = 0x86 +// <0x87=> EndpointAddress = 0x87 +// <id> usb_cdcd_acm_data_bulkin_epaddr +#ifndef CONF_USB_CDCD_ACM_DATA_BULKIN_EPADDR +#define CONF_USB_CDCD_ACM_DATA_BULKIN_EPADDR 0x81 +#endif + +// <o> BULK IN Endpoint wMaxPacketSize +// <0x0008=> 8 bytes +// <0x0010=> 16 bytes +// <0x0020=> 32 bytes +// <0x0040=> 64 bytes +// <id> usb_cdcd_acm_data_builin_maxpksz +#ifndef CONF_USB_CDCD_ACM_DATA_BULKIN_MAXPKSZ +#define CONF_USB_CDCD_ACM_DATA_BULKIN_MAXPKSZ 0x40 +#endif + +// <o> BULK IN Endpoint wMaxPacketSize for High Speed +// <0x0008=> 8 bytes +// <0x0010=> 16 bytes +// <0x0020=> 32 bytes +// <0x0040=> 64 bytes +// <0x0080=> 128 bytes +// <0x0100=> 256 bytes +// <0x0200=> 512 bytes +// <id> usb_cdcd_acm_data_builin_maxpksz_hs +#ifndef CONF_USB_CDCD_ACM_DATA_BULKIN_MAXPKSZ_HS +#define CONF_USB_CDCD_ACM_DATA_BULKIN_MAXPKSZ_HS 0x200 +#endif + +// <o> BULK OUT Endpoint Address +// <0x01=> EndpointAddress = 0x01 +// <0x02=> EndpointAddress = 0x02 +// <0x03=> EndpointAddress = 0x03 +// <0x04=> EndpointAddress = 0x04 +// <0x05=> EndpointAddress = 0x05 +// <0x06=> EndpointAddress = 0x06 +// <0x07=> EndpointAddress = 0x07 +// <id> usb_cdcd_acm_data_bulkout_epaddr +#ifndef CONF_USB_CDCD_ACM_DATA_BULKOUT_EPADDR +#define CONF_USB_CDCD_ACM_DATA_BULKOUT_EPADDR 0x1 +#endif + +// <o> BULK OUT Endpoint wMaxPacketSize +// <0x0008=> 8 bytes +// <0x0010=> 16 bytes +// <0x0020=> 32 bytes +// <0x0040=> 64 bytes +// <id> usb_cdcd_acm_data_buckout_maxpksz +#ifndef CONF_USB_CDCD_ACM_DATA_BULKOUT_MAXPKSZ +#define CONF_USB_CDCD_ACM_DATA_BULKOUT_MAXPKSZ 0x40 +#endif + +// <o> BULK OUT Endpoint wMaxPacketSize for High Speed +// <0x0008=> 8 bytes +// <0x0010=> 16 bytes +// <0x0020=> 32 bytes +// <0x0040=> 64 bytes +// <0x0080=> 128 bytes +// <0x0100=> 256 bytes +// <0x0200=> 512 bytes +// <id> usb_cdcd_acm_data_buckout_maxpksz_hs +#ifndef CONF_USB_CDCD_ACM_DATA_BULKOUT_MAXPKSZ_HS +#define CONF_USB_CDCD_ACM_DATA_BULKOUT_MAXPKSZ_HS 0x200 +#endif +// </h> + +// <<< end of configuration section >>> + +#endif // USBD_CONFIG_H |