From fa0f71526c78e2f22a9a51907c40e1136e97d1e6 Mon Sep 17 00:00:00 2001 From: Neels Hofmeyr Date: Tue, 23 Feb 2016 14:09:38 +0100 Subject: enable telnet VTY bind address config for various programs Following the 'line vty'/'bind A.B.C.D' command added in libosmocore, use the configured address to set the telnet bind for the VTY line. It is now possible to publish the VTY on a specific local interface (including 0.0.0.0 aka "any"). Implement in all of: osmo-gbproxy osmo-gtphub osmo-sgsn osmo-bsc osmo-bsc_nat osmo-bsc_mgcp osmo-nitb In some of these main programs, move the telnet initialization below the configuration parsing. Historically, this was not a good idea for programs using bsc_init.c (aka bsc_bootstrap_network()), since they expected a gsm_network struct pointer in ((struct telnet_connection*)vty->priv)->priv, so that telnet had to be either initialized or replaced by a dummy struct. In the meantime, the gsm_network struct is not actually looked up in a priv pointer but in the static bsc_vty.c scope (bsc_gsmnet), so this limitation is mere legacy (even though said legacy is still there in an "#if 0" chunk). In the other binaries I have briefly looked at the init sequence dependencies and found no reason to initialize telnet above the config file parsing. In any case, I have tested every single one of abovementioned binaries to verify that they still parse the example config successfully and launch, allowing VTY connections on the configured address(es). I hope this suffices. In all of the above, log VTY address and port. LOGL_INFO is disabled by default in some of the logging scopes, and since it is a single log message right at program launch, I decided for the slightly more aggressive LOGL_NOTICE. --- openbsc/src/gprs/gb_proxy_main.c | 12 ++++++++---- openbsc/src/gprs/gtphub_main.c | 11 ++++++++--- openbsc/src/gprs/sgsn_main.c | 11 ++++++++--- openbsc/src/libbsc/bsc_init.c | 6 +++++- openbsc/src/osmo-bsc_mgcp/mgcp_main.c | 6 +++++- openbsc/src/osmo-bsc_nat/bsc_nat.c | 13 +++++++++---- 6 files changed, 43 insertions(+), 16 deletions(-) (limited to 'openbsc') diff --git a/openbsc/src/gprs/gb_proxy_main.c b/openbsc/src/gprs/gb_proxy_main.c index f82fb5b73..0c3cfbec4 100644 --- a/openbsc/src/gprs/gb_proxy_main.c +++ b/openbsc/src/gprs/gb_proxy_main.c @@ -252,10 +252,6 @@ int main(int argc, char **argv) rate_ctr_init(tall_bsc_ctx); osmo_stats_init(tall_bsc_ctx); - rc = telnet_init(tall_bsc_ctx, &dummy_network, OSMO_VTY_PORT_GBPROXY); - if (rc < 0) - exit(1); - bssgp_nsi = gprs_ns_instantiate(&proxy_ns_cb, tall_bsc_ctx); if (!bssgp_nsi) { LOGP(DGPRS, LOGL_ERROR, "Unable to instantiate NS\n"); @@ -274,6 +270,14 @@ int main(int argc, char **argv) exit(2); } + /* start telnet after reading config for vty_get_bind_addr() */ + LOGP(DGPRS, LOGL_NOTICE, "VTY at %s %d\n", + vty_get_bind_addr(), OSMO_VTY_PORT_GBPROXY); + rc = telnet_init_dynif(tall_bsc_ctx, &dummy_network, + vty_get_bind_addr(), OSMO_VTY_PORT_GBPROXY); + if (rc < 0) + exit(1); + if (!gprs_nsvc_by_nsei(gbcfg.nsi, gbcfg.nsip_sgsn_nsei)) { LOGP(DGPRS, LOGL_FATAL, "You cannot proxy to NSEI %u " "without creating that NSEI before\n", diff --git a/openbsc/src/gprs/gtphub_main.c b/openbsc/src/gprs/gtphub_main.c index f18710d3c..89582b1d5 100644 --- a/openbsc/src/gprs/gtphub_main.c +++ b/openbsc/src/gprs/gtphub_main.c @@ -314,9 +314,6 @@ int main(int argc, char **argv) gtphub_vty_init(hub, cfg); rate_ctr_init(osmo_gtphub_ctx); - rc = telnet_init(osmo_gtphub_ctx, 0, OSMO_VTY_PORT_GTPHUB); - if (rc < 0) - exit(1); handle_options(ccfg, argc, argv); @@ -327,6 +324,14 @@ int main(int argc, char **argv) exit(2); } + /* start telnet after reading config for vty_get_bind_addr() */ + LOGP(DGTPHUB, LOGL_NOTICE, "VTY at %s %d\n", + vty_get_bind_addr(), OSMO_VTY_PORT_GTPHUB); + rc = telnet_init_dynif(osmo_gtphub_ctx, 0, vty_get_bind_addr(), + OSMO_VTY_PORT_GTPHUB); + if (rc < 0) + exit(1); + if (gtphub_start(hub, cfg, next_restart_count(ccfg->restart_counter_file)) != 0) diff --git a/openbsc/src/gprs/sgsn_main.c b/openbsc/src/gprs/sgsn_main.c index 2d3a0e4a9..b10b0b37f 100644 --- a/openbsc/src/gprs/sgsn_main.c +++ b/openbsc/src/gprs/sgsn_main.c @@ -315,9 +315,6 @@ int main(int argc, char **argv) handle_options(argc, argv); rate_ctr_init(tall_bsc_ctx); - rc = telnet_init(tall_bsc_ctx, &dummy_network, OSMO_VTY_PORT_SGSN); - if (rc < 0) - exit(1); ctrl = sgsn_controlif_setup(NULL, OSMO_CTRL_PORT_SGSN); if (!ctrl) { @@ -357,6 +354,14 @@ int main(int argc, char **argv) exit(2); } + /* start telnet after reading config for vty_get_bind_addr() */ + LOGP(DGPRS, LOGL_NOTICE, "VTY at %s %d\n", + vty_get_bind_addr(), OSMO_VTY_PORT_SGSN); + rc = telnet_init_dynif(tall_bsc_ctx, &dummy_network, + vty_get_bind_addr(), OSMO_VTY_PORT_SGSN); + if (rc < 0) + exit(1); + rc = sgsn_gtp_init(&sgsn_inst); if (rc) { LOGP(DGPRS, LOGL_FATAL, "Cannot bind/listen on GTP socket\n"); diff --git a/openbsc/src/libbsc/bsc_init.c b/openbsc/src/libbsc/bsc_init.c index 743f4c155..859d9998f 100644 --- a/openbsc/src/libbsc/bsc_init.c +++ b/openbsc/src/libbsc/bsc_init.c @@ -495,7 +495,11 @@ int bsc_bootstrap_network(int (*mncc_recv)(struct gsm_network *, struct msgb *), return rc; } - rc = telnet_init(tall_bsc_ctx, bsc_gsmnet, OSMO_VTY_PORT_NITB_BSC); + /* start telnet after reading config for vty_get_bind_addr() */ + LOGP(DNM, LOGL_NOTICE, "VTY at %s %d\n", + vty_get_bind_addr(), OSMO_VTY_PORT_NITB_BSC); + rc = telnet_init_dynif(tall_bsc_ctx, bsc_gsmnet, vty_get_bind_addr(), + OSMO_VTY_PORT_NITB_BSC); if (rc < 0) return rc; diff --git a/openbsc/src/osmo-bsc_mgcp/mgcp_main.c b/openbsc/src/osmo-bsc_mgcp/mgcp_main.c index d755c906c..e226b02ad 100644 --- a/openbsc/src/osmo-bsc_mgcp/mgcp_main.c +++ b/openbsc/src/osmo-bsc_mgcp/mgcp_main.c @@ -232,7 +232,11 @@ int main(int argc, char **argv) if (rc < 0) return rc; - rc = telnet_init(tall_bsc_ctx, &dummy_network, OSMO_VTY_PORT_BSC_MGCP); + /* start telnet after reading config for vty_get_bind_addr() */ + LOGP(DMGCP, LOGL_NOTICE, "VTY at %s %d\n", + vty_get_bind_addr(), OSMO_VTY_PORT_BSC_MGCP); + rc = telnet_init_dynif(tall_bsc_ctx, &dummy_network, + vty_get_bind_addr(), OSMO_VTY_PORT_BSC_MGCP); if (rc < 0) return rc; diff --git a/openbsc/src/osmo-bsc_nat/bsc_nat.c b/openbsc/src/osmo-bsc_nat/bsc_nat.c index 2d4f2a801..04c12e33f 100644 --- a/openbsc/src/osmo-bsc_nat/bsc_nat.c +++ b/openbsc/src/osmo-bsc_nat/bsc_nat.c @@ -1628,15 +1628,20 @@ int main(int argc, char **argv) osmo_stats_init(tall_bsc_ctx); /* init vty and parse */ - if (telnet_init(tall_bsc_ctx, NULL, OSMO_VTY_PORT_BSC_NAT)) { - fprintf(stderr, "Creating VTY telnet line failed\n"); - return -5; - } if (mgcp_parse_config(config_file, nat->mgcp_cfg, MGCP_BSC_NAT) < 0) { fprintf(stderr, "Failed to parse the config file: '%s'\n", config_file); return -3; } + /* start telnet after reading config for vty_get_bind_addr() */ + LOGP(DNAT, LOGL_NOTICE, "VTY at %s %d\n", + vty_get_bind_addr(), OSMO_VTY_PORT_BSC_NAT); + if (telnet_init_dynif(tall_bsc_ctx, NULL, vty_get_bind_addr(), + OSMO_VTY_PORT_BSC_NAT)) { + fprintf(stderr, "Creating VTY telnet line failed\n"); + return -5; + } + /* over rule the VTY config for MSC IP */ if (msc_ip) bsc_nat_set_msc_ip(nat, msc_ip); -- cgit v1.2.3