From 720372e4e8998d2979a423afebdfa742edbea27b Mon Sep 17 00:00:00 2001 From: Neels Hofmeyr Date: Mon, 14 Dec 2015 11:29:55 +0100 Subject: gtphub VTY test: use only 127.0.0.1. Add a second example config file for gtphub so that the VTY test can use nonstandard ports. --- .../examples/osmo-gtphub/osmo-gtphub-1iface.cfg | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 openbsc/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg (limited to 'openbsc/doc/examples') diff --git a/openbsc/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg b/openbsc/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg new file mode 100644 index 000000000..3913d2c3c --- /dev/null +++ b/openbsc/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg @@ -0,0 +1,25 @@ +! +! Osmocom gtphub configuration +! +! This file is used for VTY tests, referenced by openbsc/osmoappdesc.py +! For the test, try to use most config commands. +! + +line vty + no login + +gtphub + ! Local addresses to listen on and send from, both on one interface. + ! The side towards SGSN uses nonstandard ports. + bind-to-sgsns ctrl 127.0.0.1 12123 user 127.0.0.1 12153 + ! The GGSN side with standard ports. + bind-to-ggsns 127.0.0.1 + + ! Proxy: unconditionally direct all traffic to... + sgsn-proxy 127.0.0.4 + + ! Proxy with nonstandard ports or separate IPs: + ggsn-proxy ctrl 127.0.0.3 2123 user 127.0.0.5 2152 + + ! Add a name server for GGSN resolution + grx-dns-add 192.168.0.1 -- cgit v1.2.3