Age | Commit message (Collapse) | Author | Files | Lines |
|
* add messages at start-up and to the VTY
* users must explicitly confirm they want to run osmo-nitb
Change-Id: I5d5c0ff386dbc2e7b7dd02d6c33d1f9fec70707b
|
|
Make build and external tests work with python3, so we can drop
the python2 dependency.
This should be merged shortly after osmo-python-tests was migrated to
python3, and the jenkins build slaves were (automatically) updated to
have the new osmo-python-tests installed.
Related: OS#2819
Depends: osmo-python-tests I3ffc3519bf6c22536a49dad7a966188ddad351a7
Change-Id: Id7d006f892198bb8a7c0d4a8a8ea00b8d0e62df4
|
|
According to documentation (and personal experience), AM_PATH_PYTHON
selects the highest version of python, no matter if major version is
different, which means if both python2 and 3 are available, 3 will be
chosen an PYTHON will point to "/.../python" which is python3. Apparently,
the macro cannot be easily used to pick highest python2 version.
chosen an PYTHON will point to "/.../python" which is python3. Apparently,
the macro cannot be easily used to pick highest python2 version.
As {vty,ctrl}_test_runner.py require python2 and are incompatible with
python3, let's instead rely on the system having a "python2" binary
available, which is the case in most distros.
cherry-picked from: osmo-bsc.git 7e78681f0f740bd68ed5255b506a1efa08a231b1.
Change-Id: Icc147c8457116ad551d166313f3a79e1c2107a22
|
|
Change-Id: I536d78a2a1962240e5e369cda9927d8c9955ab86
|
|
ipa_ccm_idtag_parse_off is broken, and can only be used with
len_offset=1 on ID Request messages, otherwise won't work correctly.
Modify ipa_ccm_idtag_parse to at least parse those correctly, and
document the limitations.
Those two functions are already deprecated and only used in openbsc by 3
callers:
* ipa_ccm_idtag_parse in ussd_read_cb(): Broken, that function can only
work for Requests and it's used to parse a Response.
* ipa_ccm_idtag_parse_off in forward_sccp_to_msc (NAT): Broken, it can
only be used to parse Requests and it's used to parse a Response.
Furthermore, len_offset=2 is passed which makes no sense and most
probably it fails always, or can even make the program crash.
* ipa_ccm_idtag_parse_off in (answer_challenge): This one is fine and
could actually be replaced with ipa_ccm_id_get_parse after libosmocore
commit (see below) is merged.
See libosmocore I6efc852dfc041192f554e41a58290a0f63298021 for more information.
As a consequence of the fixes, osmo-bsc-nat now parses messages sent
from VTY test correctly and thus it goes into processing them instead of
silently dropping them. As a result, some VTY tests fail because they
are sending incorrect format (missing NULL char in unit id strings) and
osmo-bsc-nat closses its connection (due to bad auth).
Change-Id: I3b995f8ef0b48c0a5b3375e42926641934359cd2
|
|
Change-Id: I080ae6a4c4f92dd8df055efd25e308f8a3377d34
|
|
This is to avoid naming conflicts with the new osmo-bsc, which resides
in its own git repository (osmo-bsc.git) and which uses libosmo-sigtran
and implements (primarily) 3GPP AoIP.
Change-Id: If10d1599b62d010726336134091a4e855c380d93
|
|
The GPRS related programs osmo-sgsn, osmo-gtphub and osmo-gbproxy
have been split off into the separate osmo-sgsn repository, which
can be found at
git://git.osmocom.org/osmo-sgsn.git
http://git.osmocom.org/osmo-sgsn/
This is technically unrelated but conceptually part of the larger
NITB-split activities.
I did a brief log of all changes in src/gprs and couldn't find any
commits that we might have applied here but which are missing from
osmo-sgsn.git.
Change-Id: If60e28b23f5cfb2c4eb354951363a2bb63f3e0de
|
|
Fix four instances of VTY tests working because it used to include implicit
'exit' commands to the parent node.
Since libosmocore change-id Id73cba2dd34676bad8a130e9c45e67a272f19588 = commit
d64b6aed235f6e4d84a2cb8e84b32c3179260254, we no longer do this implicit-exit in
interactive VTY shells.
*) the nitb node lacked the default command set (including 'end' and 'exit'),
so it was impossible to leave the nitb node. This hit in
testSubscriberCreateDelete. Add vty_install_default(NITB_NODE).
*) in testPingPongConfiguration, the intention is to enter the /msc 0 node.
Drop prior entry of the 'network' node, which looks like an oversight. So
far the 'msc 0' caused an implicit 'exit' and thus worked, now fails.
*) Two instances following comments "# Check searching for outer node's
commands", which look like they are intended to check for this implicit-exit
behavior. This is obsolete, drop those parts of the tests.
Change-Id: I77931d6a09c42c443c6936000592f22a7fd06cab
|
|
The VTY config allows above 32bit range extensions, but
db_subscriber_alloc_exten() was unable to generate extensions outside of 32bit.
Add VTY regression test and fix the problem by using proper 64bit types.
Related: OS#2253
Change-Id: I9afe6a8833004ecd2f3f936b2d5aa4de8e7dbcb0
|
|
Fix parsing of the 'subscriber-create-on-demand random' VTY: atoi() is not
enough to include the specified range of 1-9999999999.
Use atoll() instead to ensure a large enough number space also on 32bit
systems.
(Note: for me, atoll() truncates at 32 bit when <stdlib.h> is not included.)
Add a VTY regression test for this.
Related: OS#2253
Change-Id: I353e04481ec567adca383d6b51ba8fb865eed73e
|
|
The VTY tests assume that $top_builddir == $top_srcdir. Use the script's
location from sys.path[0] to find the correct locations of example configs even
when building in another directory.
Change-Id: I2731f361e3b72d0980968e6cf83594ea450db7c2
|
|
osmo-python-tests now includes code that retries connecting the VTY socket and
needs no external sleep()ing. This flies through most tests without any sleep()
at all.
See osmo-python-tests.git change-id Icc337f52a93d5fe31fc4ff235ccaf4e0fe75fa39
Change-Id: I42161d9716fe5bb0ef1c56e4bfb770bb99bbca7a
|
|
Change-Id: Ib64cf8690627803e1b4a8497ea63f1e766960478
|
|
Depends: osmo-python-tests change-id I92f90c334169f31920c63dd5c5ac8dac215065e6
Change-Id: I849455e0423e1a63d6890aef7f9c6075ad53a920
|
|
When running the testBSCreload test in close succession, I get a "Connection
refused" error because the socket is still in TIME_WAIT state. Passing the
SO_REUSEADDR flag allows reusing the addr despite a TIME_WAIT socket.
Change-Id: I941851b062999ab4b962430f7b27c19935993e0a
|
|
Change-Id: Id8eb70ddfdc1d0d9f90aa5343a4ea522042c34ee
|
|
Change-Id: I7361bb0ce5302d00ccb18dc04eeb75ee1f6844a8
|
|
Each running test would open up another socket without ever closing unused
ones. Close the sockets after each test is done.
Change-Id: Ie433c8560de54f9a9d05fa07c44bae3126d19b30
|
|
Change-Id: I4251a24eb7a57a354aa76de711547c3e76ebb846
|
|
'self' will not be accessible in that context, so this patch isn't
useful.
This reverts commit b39053ad6de50df5a2efcb4ec0c6551020b513e1.
Change-Id: Ic1a9ba5fdfd7bdc6c5cf0974e8c637ae23b81ece
|
|
Change-Id: I995b7aba9d0b51b0861a4281dbbca888f36e9e00
|
|
Change-Id: I3d833ddf8c62845fe68d1e5503332541a4a04a2d
|
|
Add verbose logging as well as three retries around the place that often
fails on our build server with a 'Broken Pipe' error.
Change-Id: I8851b76b2d7b87dd500ae40f47e6bea716ef3fc4
|
|
Replace hackish ipa_send_* routines with proper implementation from IPA
module thus making it part of extended tests.
Change-Id: If13ed7fd243ce3aeef505d2e8468e221aa62f79e
|
|
Time zone used to be configurable per-BTS. In the upcoming MSC-split, no BTS
structures will be available on the MSC level. To simplify, drop the ability to
manage several time zones in a core network and place the time zone config on
the network VTY level, i.e. in gsm_network. If we are going to re-add fine
grained time zone settings, it should probably be tied to the LAC.
Adjust time zone VTY config code (to be moved to libcommon-cs in subsequent commit).
Adjust time zone Ctrl Interface code.
Change-Id: I69848887d92990f3d6f969be80f6ef91f6bdbbe8
|
|
Most of this file uses four spaces of indenting. Replace all tabs with spaces.
Remove the erratic 'set' from the recently added vim comment at the bottom.
Change-Id: I4273b3314defb1e5b31b509c2ac7d7c6cd6834cf
|
|
Add option to TextTestRunner that shows print output on stdout.
It's better to see everything in our jenkins runs and not hide test output.
Change-Id: If4be1ad1c81c9ed4ab9b208b4c6d1e4b2cc8fdd5
|
|
In nat_msc_test(), upon socket timeout, retry up to six times. Reduce the
timeout between retries. This should get rid of sporadic test failures that
we've been seeing a lot on jenkins lately.
Raise an exception upon unexpected vty response.
Print more detail to stdout. Since we would actually want as much output as we
can get in a test suite, remove the 'if (verbose)' and just always print the
connection source. unittest is keeping all stdout silent by default anyway.
Change-Id: I2f83eef55592778e54164a90e1eabeb80fb918da
|
|
Instead of below error, raise an exception to describe what's happening.
Seen in a jenkins run on https://gerrit.osmocom.org/#/c/945/2:
ERROR: testBSCreload (__main__.TestVTYNAT)
----------------------------------------------------------------------
Traceback (most recent call last):
File "./vty_test_runner.py", line 787, in testBSCreload
msc = nat_msc_test(self, ip, port)
File "./vty_test_runner.py", line 1251, in nat_msc_test
return conn
UnboundLocalError: local variable 'conn' referenced before assignment
Change-Id: Iae26e7345267a21aed0b108b089453832889c9fa
|
|
Change-Id: I61a0476a0317b011432bb4f6f593cfdcaf1c072b
|
|
Previously it was possible to start osmo-sgsn with "auth-policy remote"
but without "gsup remote-*" which resulted in broken setup: no MS could
perform GPRS ATTACH. Add consistency check to vty code to fix this.
Related: OS#1582
Change-Id: Ie4296e7d99d7833f7d828b0196435ea81097cf6e
|
|
Previously if subscriber was automatically created it got assigned
random MSISDN number. Make it optional (defaulting to previous behavior)
by adding following:
* new optional no-extension argument for subscriber-create-on-demand vty
command
* db unit tests
* vty test
Note: using the db made with new code might result in subscribers with
empty extension. Such subscribers cannot be deleted using old
code. Make sure not to mix db versions or manually fix it by editing
sqlite with external program.
Fixes: OS#1658
Change-Id: Ibbc2e88e4722b08854ebc631485f19ed56443cbb
|
|
Use correct vty command for subscriber deletion, adjust assertions
accordingly. The error was cause by inconsistent syntax of vty commands
for subscriber creation and deletion.
Change-Id: I9b9376b4ac0ec066000545167de312ca4460493b
|
|
Previously if subscriber was automatically created it got assigned
random MSISDN number between 20000 and 49999. Make it configurable with
new vty command "subscriber-create-on-demand random" and expand vty
tests to check it.
Change-Id: I040a1d227b0c7a1601dc7c33eccb0007941408a6
Related: OS#1658
|
|
* extend "auth policy" vty command with new option "regexp"
* add vty command "authorized-regexp" for setting arbitrary POSIX
regular expression
* add basic vty test
* add optional "regexp" argument to subscriber-create-on-demand vty
command
With those in place we can now set the regexp against which MS's IMSI
will be matched.
If IMSI match the regexp than MS is allowed to access the network. If
subscriber is already marked as authorized in HLR than it'll be allowed
regardless of IMSI matching.
The same way we can decide whether to create subscribers on-demand
basesd on IMSI regexp match. Similar to authorization this restriction
can be overridden by manually creating subscriber via vty, ctrl
interface or directly in HLR.
Change-Id: I525f4b80676de47d1d422686da2ca012301b0129
Fixes: OS#1647
|
|
* add data structures, generation functions
* vty interface for neightbor UARFCNs specific to SI2quater
* vty test
* unit test
Fixes: OS#1666
|
|
* fix typo in arg index
* fix sign in error reporting
* add vty test
|
|
Use the simpler approach and just call encode('hex') on the str and
then convert it to lower case to keep the tests working.
reproduce:
Python 2.6.6 (r266:84292, Dec 27 2010, 00:02:40)
[GCC 4.4.5] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> d = '\0\0'
>>> d
'\x00\x00'
>>> "".join("{:02x}".format(ord(c)) for c in d)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "<stdin>", line 1, in <genexpr>
ValueError: zero length field name in format
fixes:
======================================================================
ERROR: testBSCreload (__main__.TestVTYNAT)
----------------------------------------------------------------------
Traceback (most recent call last):
File "./vty_test_runner.py", line 658, in testBSCreload
b0 = nat_bsc_sock_test(0, "lol")
File "./vty_test_runner.py", line 1150, in nat_bsc_sock_test
ipa_handle_small(bsc, verbose)
File "./vty_test_runner.py", line 1116, in ipa_handle_small
s = data2str(x.recv(4))
File "./vty_test_runner.py", line 1100, in data2str
return "".join("{:02x}".format(ord(c)) for c in d)
File "./vty_test_runner.py", line 1100, in <genexpr>
return "".join("{:02x}".format(ord(c)) for c in d)
ValueError: zero length field name in format
----------------------------------------------------------------------
|
|
If we want to separate the BSCs we should separate based on
the source port and not the source ip (at least in the current
test setup).
Fixes:
======================================================================
ERROR: testBSCreload (__main__.TestVTYNAT)
----------------------------------------------------------------------
Traceback (most recent call last):
File "./vty_test_runner.py", line 658, in testBSCreload
b0 = nat_bsc_sock_test(0, "lol")
File "./vty_test_runner.py", line 1145, in nat_bsc_sock_test
bsc.bind(('127.0.0.1' + str(nr), 0))
File "<string>", line 1, in bind
error: [Errno 99] Cannot assign requested address
----------------------------------------------------------------------
|
|
|
|
======================================================================
ERROR: testBSCreload (__main__.TestVTYNAT)
----------------------------------------------------------------------
Traceback (most recent call last):
File "./vty_test_runner.py", line 656, in testBSCreload
nat_msc_ip(self, ip, port)
File "./vty_test_runner.py", line 1096, in nat_msc_ip
x.vty.command("msc port " + port)
TypeError: cannot concatenate 'str' and 'int' objects
----------------------------------------------------------------------
|
|
Update the comment to reflect that the NAT itself will bind to port
5000 and then the mock MSC will fail to bind to it. Try to move the
mock MSC to another port.
Could fix:
======================================================================
ERROR: testBSCreload (__main__.TestVTYNAT)
----------------------------------------------------------------------
Traceback (most recent call last):
File "./vty_test_runner.py", line 654, in testBSCreload
msc = nat_msc_test(self, ip)
File "./vty_test_runner.py", line 1101, in nat_msc_test
msc.bind((ip, 5000))
File "<string>", line 1, in bind
error: [Errno 98] Address already in use
----------------------------------------------------------------------
|
|
Don't assume that one can just bind to a local address that has
not been configured. Remove the unspecific comment as I don't know
to which other tests it is referred to.
This should fix:
======================================================================
ERROR: testBSCreload (__main__.TestVTYNAT)
----------------------------------------------------------------------
Traceback (most recent call last):
File "./vty_test_runner.py", line 655, in testBSCreload
msc = nat_msc_test(self, ip)
File "./vty_test_runner.py", line 1102, in nat_msc_test
msc.bind((ip, 5000))
File "<string>", line 1, in bind
error: [Errno 99] Cannot assign requested address
----------------------------------------------------------------------
|
|
Add vty tests for BSC configuration reloading.
Load BSCs configuration on bscs-config-file command:
* remove all runtime configured BSC not in the config file
* close connections to all BSC with updated token value
Fixes: OS#1670
Sponsored-by: On-Waves ehf
|
|
Factor out 2, add 3 functions. Those functions are simple wrappers
around hex strings specific to IPA protocol. Not all of them are
utilized at the moment but they were checked with wireshark while
working on the tests. It might come in handy if we'd like to further
expand related test harness in future. The same goes for optional
verbosity argument which is not used right now but will be handy for
future debugging.
|
|
Add testcase to issue the subscriber create twice. db_create_subscriber
in db.c will first try to find the subscriber and if it exists, it will
update the "updated" column in the database.
Related: OS Issue #1657
|
|
When using multiple interfaces on a system one can now configure
which will be served for the BTS ports and which will be served
for the network. The direct usage of source_addr is now only to
initialize the MGCP receiving port itself.
|
|
List needs to be executed from within the right configuration
node to see if it is available or not. list on the toplevel
will uncoditionally show "smpp" as part of the logging config.
|
|
default-route would only be looked at after there has been
no subscriber in the local database. Depending on the setup
this is not what one wants. This has been discussed at the
OsmoDevCon and there have been hacks in some branches. Let's
introduce a VTY command to select if SMPP should be consulted
first and then fallback to the current behavior.
|