aboutsummaryrefslogtreecommitdiffstats
path: root/openbsc/tests/gsm0408
AgeCommit message (Collapse)AuthorFilesLines
2017-06-18mscsplit: various preparations to separate MSC from BSCNeels Hofmeyr1-2/+2
Disable large parts of the code that depend on BSC presence. Don't set msg->lchan nor msg->dst. Don't use lchan in libmsc. Decouple lac from bts. Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication: Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to different interfaces depending on the actual subscriber connection. While iu_tx() is going to be functional fairly soon, the a_tx() is going to be just a dummy for some time (see comment). Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer and an indicator for the Integrity Protection status on Iu (to be fully implemented in later commits). Add lac member to gsm_subscriber_connection, to allow decoupling from bts->location_area_code. The conn->lac will actually be set in iu.c in an upcoming commit ("add iucs.[hc]"). move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi(). libmsc: duplicate gsm0808 / gsm48 functions (towards BSC). In osmo-nitb, libmsc would directly call the functions on the BSC level, not always via the bsc_api. When separating libmsc from libbsc, some functions are missing from the linkage. Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also add a _tx to gsm0808_cipher_mode(): * add msc_gsm0808_tx_cipher_mode() (dummy/stub) * add msc_gsm48_tx_mm_serv_ack() * add msc_gsm48_tx_mm_serv_rej() Call these from libmsc instead of * gsm0808_cipher_mode() * gsm48_tx_mm_serv_ack() * gsm48_tx_mm_serv_rej() Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places. Temporarily disable all paging to be able to link libmsc without libbsc. Skip the paging part of channel_test because the paging is now disabled. In osmo-nitb, paging is done on BSC level and MSC level "at the same time". When the new MSC is fully operational, paging will be controlled separately on the MSC level, and the BSC (RNC) level will be instructed over an IuCS or A-interface to negotiate paging with the MS (UE). This MSC level paging does not yet exist and will be added in subsequent commits. msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values for return val, to avoid dependency on libbsc headers. Make callable from other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c add gsm_encr to subscr_conn move subscr_request to gsm_subscriber.h subscr_request_channel() -> subscr_request_conn() move to libmsc: osmo_stats_vty_add_cmds() gsm_04_08: remove apply_codec_restrictions() gsm0408_test: use NULL for root ctx move to libbsc: gsm_bts_neighbor() move to libbsc: lchan_next_meas_rep() move vty config for t3212 to network level (periodic lu) remove unneccessary linking from some tests remove handle_abisip_signal() abis_rsl.c: don't use libvlr from libbsc Change-Id: I9cf80f9c2c8a53a29e42f000029e680a9922cb41
2017-06-15Update SI data structures and generationMax2-28/+150
To support segmented SI2quater as per 3GPP TS 44.018 we'll have to support multiple SI messages (up to 16 for SI2q) for a given type in contrast to existing 1:1 mapping: * expand storage space to hold up to 16 SI messages (spec limit) * add assertions for budget calculations * generate multiple SI2q messages * adjust SI2q-related tests * use precise check for number of SIq messages instead of approximate estimation Change-Id: Ic516ec9f0b821557d9461ae9f1c0afdd786f3b05 Related: OS#1660
2017-06-15Move SI-related definesMax1-1/+1
* move SI2quater related defines to shared header * add define from OsmoBTS which checks for presence of a given SI message in gsm_bts struct. Rename it to avoid conflicts with OsmoBTS code and to match naming conventions of similar macros. Change-Id: I11432c93c772d1ead6d45a7bb0f1d13d492c82f1 Related: OS#1660
2017-05-15SI2quater: fix EARFCN inclusion checkMax2-32/+86
Previously only the existance of bts->si_common.si2quater_neigh_list was checked but not the actual number of EARFCNs in it. Fix it by using si2q_earfcn_count() and adjust tests accordingly. While at it - reformat tests to include extra information. The correctness was checked manually by inspecting GSMTAP output. Change-Id: Ic4fb2a9e870db66cac58b1e8d113587b30d64ce2 Related: RT#8792
2017-05-15Restructure SI2quater generationMax2-52/+43
In preparation for extended SI2q messages: * add SI2q-specific accessor macro * add *_offset variables to gsm_bts struct * internalize memory check while generating rest octets - introduce budget concept (number of bits available in a given message) * internalize *arfcn_size() functions as they are not needed outside of si2q_num() anymore * change rest octets generation to work with gsm_bts struct directly * do not generate rest octets if no SI2q is necessary * adjust unit tests accordingly (cosmetic changes only to avoid regressions) Requires: I92e12e91605bdab9916a3f665705287572434f74 in libosmocore Change-Id: Ib554cf7ffc949a321571e1ae2ada1160e1b35fa6 Related: RT#8792
2017-04-28Prepare for extended SI2quater supportMax1-3/+2
Supporting SI2quater as per 3GPP TS 44.018 will require chnages to the way System Information is stored because it uses 1:n instead of 1:1 mapping between SI type and generated SI content. This should not affect other SI types though. To facilitate this transition: * convert the code to always use GSM_BTS_SI helper instead of accessing buffer directly * make helper more robust by adding extra parenthesis * add similar helper for gsm_lchan * add function estimating number of SI2quater message to hold configured number of (U|E)ARFCNs * add SI2q index/count fields and pass them to rest_octets generator explicitly * internalize buffer access in generate_si* functions Change-Id: I74e4e3cb86364cec869a1472a41b4a95af0d50dd Related: RT#8792
2017-01-23SI2q: add support for multiple UARFCNsMax2-2/+32
Support multiple UARFCNs with the same Scrambler Code. Fixes: RT#7379 Change-Id: If1c32e8b547a28325180faaaddd21f80c37f7337
2017-01-23Prevent segfault in range encodingMax2-0/+20
* Explicitly check when ARFCN array split is impossible and return gracefully instead of using negative index. * Separate range encoding into generic function and use it for all SI-related things. * Propagate the error into that function and to its callers. * Add separate test-case for the segfault previously triggered by this bug. Change-Id: I3e049ab2d7c1c4d6c791b148f37e10636a8e43e0 Related: RT#7379
2016-12-09gsm0408_test.c: Don't pass negative value to strerror()Harald Welte1-1/+1
Change-Id: I4fcf24ec1bc974a3189486d2372b9713d7fdab70 Fixes: Coverity CID 135192
2016-12-02tests: drop unused libmsc, unneeded duplicate libbsc linkingNeels Hofmeyr1-1/+0
Because of libcommon-cs, tests/gsm0408,subscr,trau no longer need libmsc. Change-Id: I9073eba41a1cd3136ed7a9def6fe8aaf282eaa18
2016-12-02sms_next_rp_msg_ref(): use direct pointer to next_rp_ref counterNeels Hofmeyr1-3/+3
libbsc and libmsc will have separate subscriber connection structs. Hence don't rely on gsm_subscriber_connection, but work on a direct pointer to the counter for the next RP reference. The only very thin function in gsm_04_11_helper.c thus becomes obsolete: drop the entire file. Change-Id: I2a2e9ba6a981a385d1f8f07acbe03536ffed0072
2016-11-24move to libcommon-cs: net init 3: actual moveNeels Hofmeyr1-0/+1
Reincarnate gsm_network_init() as the parts not specific to libbsc. Move from bsc_network_init() those bits that are not BSC specific (and useful for upcoming osmo-cscn). Add libcommon-cs to all linkages that use gsm_network_init(). Note: the only requirement to allow linking gsm_network_init() without libbsc is to keep the call to gsm_net_update_ctype() out of libcommon-cs. The other items are kept out of libcommon-cs because it makes sense semantically. But the separation is not strong in that the BSC specific data members are of course still omnipresent in struct gsm_network. If bsc_network_init() is not called, these are not initialized properly -- for now no users of uninitialized members exist. So this is just a first step towards a sensible split of the BSC and MSC gsm_network structs. The long term aim should be to have entirely separate structs with some common general items. Change-Id: If06316b97002390dc9a434686750cb96193ea63b
2016-11-24move to libcommon-cs: net init 2: move bsc_network_init decl to new .hNeels Hofmeyr1-0/+1
bsc_network_init() is more fit to live in a BSC specific header, move it to new common_bsc.h. It will probably also absorb the BSC-specific part of gsm_network in the future. Adjust header includes across the board. Particularly, fix abis_nm.h by explicitly including gsm_data.h: it so far relied on other headers to do that, which now is no longer always given. Change-Id: I9edfb1e748bb1cb484fadd48b0406f5b3098e89b
2016-11-24move to libcommon-cs: net init 1: rename to bsc_network_initNeels Hofmeyr1-2/+2
The gsm_network_init() function initializes a whole lot of BSC specific stuff. Aiming to move some of it to libcommon-cs, first rename it to bsc_network_init(). This will retain the BSC specific stuff when the move is done. Adjust all callers. Future: osmo-cscn will call the more generic part and not the BSC specific part. Change-Id: I4816ae19374390fc5c64972f7cad2e9ec3d8bcc3
2016-09-26mscsplit: gsm_network_init(): add explicit root talloc ctxNeels Hofmeyr1-2/+2
Decouple the root talloc context from libbsc's global talloc_bsc_ctx. This allows to define the root talloc ctx from a main() scope, which in turn helps decouple libmsc from libbsc. Change-Id: I92f6b47b1eeea2e8f3fba66f25d7e708e5659f8a
2016-09-15Consistenly format variables in */Makefile.am filesAlexander Huemer1-12/+34
Change-Id: Ifa21513c007072314097b7bec188579972dc1694
2016-05-31Make si2q scheduling optionalMax2-18/+31
Previously si2quater SI messages were always scheduled. Check for neighbor configuration and only schedule si2q when necessary. Add corresponding unit test. Change-Id: Ibe997803ffb894133fd4d838410fe735791d414f Fixes: OS#1727 Reviewed-on: https://gerrit.osmocom.org/81 Tested-by: Jenkins Builder Reviewed-by: Holger Freyther <holger@freyther.de>
2016-05-22drop unneccessary duplicate linking: tests/gsm0408Neels Hofmeyr1-1/+0
Change-Id: I8b6fb27d1db0157cb7d61f18b03f33c4f3168946 Reviewed-on: https://gerrit.osmocom.org/90 Tested-by: Jenkins Builder Reviewed-by: Holger Freyther <holger@freyther.de>
2016-04-22Add vty check for max si2quater sizeMax2-33/+24
Explicitly check if added (U|E)ARFCN will fit into available si2quater message.
2016-04-22Add basic UARFCN supportMax2-21/+68
* add data structures, generation functions * vty interface for neightbor UARFCNs specific to SI2quater * vty test * unit test Fixes: OS#1666
2016-04-16Add basic SI2quater supportMax3-1/+79
* support for sending arbitrary static SI2quater. * vty interface for neightbor EARFCNs specific to SI2quater. * dynamic generation of SI2quater messages. * unit test for SI2quater messages. Fixes: OS#1630
2016-03-17Revert "move to hex TMSI representation"Harald Welte1-1/+1
This reverts commit 044fbe6568f82a12bf4e3addc7e3d6db529b6548.
2016-03-17move to hex TMSI representationVadim Yanitskiy1-1/+1
In OpenBSC, we traditionally displayed a TMSI in its integer representation, which is quite unusual in the telecom world. A TMSI is normally printed as a series of 8 hex digits. This patch aligns OpenBSC with the telecom industry standard. Signed-off-by: Vadim Yanitskiy <axilirator@gmail.com>
2015-08-0364bit: Fix compiler warnings in regard to 64bitHolger Hans Peter Freyther1-1/+1
vty_interface_layer3.c:584:4: warning: format '%d' expects argument of type 'int', but argument 3 has type 'long unsigned int' [-Wformat=] sizeof(subscr->extension)-1, VTY_NEWLINE);
2014-02-20sms: Increment the RP Message Reference for each transactionHolger Hans Peter Freyther2-0/+29
Each RP-DATA should have a unique msg reference. Currently 42 is used for all of these. Remember the last reference we used and increment it on the next SMS. Do not track if the reference is still in use a clash is a lot less likely now. First unless SMPP is used only one SMS is delivered at a time, second the transaction space is a lot smaller than the one for the reference.
2014-01-17openbsc: Fix coverity issuesJacob Erlbeck1-3/+3
This patch (hopefully) fixes the new defects reported by coverity. Addresses: ** CID 1156986: Negative array index read (NEGATIVE_RETURNS) /tests/gsm0408/gsm0408_test.c: 419 in test_si_range_helpers() /tests/gsm0408/gsm0408_test.c: 423 in test_si_range_helpers() /tests/gsm0408/gsm0408_test.c: 427 in test_si_range_helpers() ** CID 1156987: Unchecked return value from library (CHECKED_RETURN) /src/libmgcp/mgcp_protocol.c: 1150 in mgcp_keepalive_timer_cb() ** CID 1156988: Unchecked return value from library (CHECKED_RETURN) /src/libmgcp/mgcp_protocol.c: 983 in handle_modify_con() Sponsored-by: On-Waves ehf
2014-01-16si: Implement range 128, 256, 1024 encodingJacob Erlbeck1-11/+6
This commit adds the implementation of these range formats to the encoder. In addition, the work-around that tried range 512 first is removed, so that the selection is primarily based on the max distance between frequencies. Ticket: OW#1061 Sponsored-by: On-Waves ehf
2014-01-16si: Fix range1024 encodingJacob Erlbeck1-12/+12
f0 is currently set to arfcns[0] in range_enc_determine_range(), while GSM 04.08 requires f0 to be ARFCN 0 in range1024 encoding. This patch modifies range_enc_determine_range() to force f0 to be 0 if this encoding is used. This way the case distinction in range_enc_filter_arfcns() is not longer necessary. Sponsored-by: On-Waves ehf
2014-01-16si: Fix range512 encodingJacob Erlbeck1-9/+2
This patch fixes a bug in the range encoder that leads to wrong encoding when 17 or more ARFCNs are encoded. Sponsored-by: On-Waves ehf
2014-01-16si/test: Merge si tests into gsm48 testsJacob Erlbeck2-0/+166
Currently tests covering features of the GSM 04.08 specification are spread over the si and gsm0408 subdirs in tests. This commit merges all tests from 'si' into 'gsm0408' and removes the 'si' test sub-directory. Sponsored-by: On-Waves ehf
2014-01-16si/test: Add tests for range encoding/decodingJacob Erlbeck3-0/+265
This commit adds test range encoding tests. They check the property decoding(encoding(L)) = L and optionally dump the results and encoded sequences to stdout. There a 2 test modes: - A list of fixed tests - A random number based test loop per ARFCN list size (only dumps the first failing test) Sponsored-by: On-Waves ehf
2013-06-12Makefile.am: Use AM_CPPFLAGSAlexander Huemer1-1/+1
Since automake 1.13 INCLUDES is depricates and causes a warning
2012-01-15abis: gsm_data_shared.h includes libosmo-abis header, add abis to cflagsHolger Hans Peter Freyther1-1/+1
gsm_data_shared.h includes e1_input.h of libosmo-abis, add the LIBOSMOABIS_CFLAGS to Makefile.am, remove AM_LDFLAGS at the same time as we only build .a archives.
2012-01-06tests: Introduce running tests with GNU autotest in OpenBSCHolger Hans Peter Freyther2-0/+7
The quality of the tests is of different value but it is good to get started and improve from here.
2012-01-06gsm0408: Print message when the test is doneHolger Hans Peter Freyther1-1/+2
2011-05-07src: use namespace prefix osmo_* for misc utilsPablo Neira Ayuso1-2/+2
Summary of changes: s/bcd2char/osmo_bcd2char/g s/char2bcd/osmo_char2bcd/g s/hexparse/osmo_hexparse/g s/hexdump/osmo_hexdump/g s/hexdump_nospc/osmo_hexdump_nospc/g s/ubit_dump/osmo_ubit_dump/g s/static_assert/osmo_static_assert/g
2011-04-18misc: Move from u_int to uint types of stdint.hHolger Hans Peter Freyther1-3/+3
This was done with sed on the files.
2011-03-23src: use new library libosmogsm and new path to headers in libosmocorePablo Neira Ayuso1-2/+2
libosmogsm is a new library that is distributed in the libosmocore. Now, openbsc depends on it. This patch gets openbsc with this change. This patch also rewrites all include path to the new osmocom/[gsm|core] Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
2011-03-04prefix sub-directories containing libraries with 'lib'Harald Welte1-1/+4
... and make sure tests work again after restructuring
2011-02-11[BSC] Move the BTS-type specific code from bcs_init.c to bts_*.cHarald Welte1-8/+0
bsc_init.c was a big mess even only for two supported BTS models, so before adding more BTS types, this needs a cleanup. All the BTS specific code from bsc_init.c has now moved into bts_{siemens_bs11,ipaccess_nanobts}.c This has required that input_event() and nm_state_event() get both converted to proper libosmocore signals instead of referencing external symbols.
2011-01-01License change: We are now AGPLv3+ instead of GPLv2+Harald Welte1-5/+4
The reason for this is quite simple: We want to make sure anyone running a customized version of OpenBSC to operate a network will have to release all custom modifiations to the source code.
2010-09-18janitor: Move the * to the variable nameHolger Hans Peter Freyther1-1/+1
2010-03-04move some gsm48 utility functions to libosmocoreHarald Welte1-2/+6
* gsm48_generate_lai() gsm48_generate_mid_from_tmsi() gsm48_generate_mid_from_imsi() * gsm48_cc_msg_names[]
2010-02-26[misc] Add LIBOSMOCORE_CFLAGS to the includesHolger Hans Peter Freyther1-0/+1
2010-02-20finish openbsc / libosmocore separationHarald Welte1-1/+1
* use pkg-config from openbsc to find header and library * move sms and timer tests to libosmocore itself * ensure "make distcheck" works on both packages
2010-02-09liblaf0rge: Make the other targets depend on the liblaforge...Holger Hans Peter Freyther1-1/+1
Everything is linking fine here.
2009-08-20[gsm48] Introduce a gsm48_generate_mid_from_imsi methodHolger Hans Peter Freyther1-2/+38
Prefix generate_mid_from_tmsi with a gsm48_, create a new method to binary encode the imsi. Add a unit test for parsing and decoding. The implementation can parse the data it generated and the last octet seems to be filled with the end mark.
2009-08-17[bsc] Move the GSM 04.08 helper functions to gsm_04_08_utils.cHolger Hans Peter Freyther1-1/+1
The existing gsm_04_08.c implementation is mixing BSC and MSC behavior. Move some simple parsing and generation functions over to gsm_04_08_utils.c to allow a different MSC to define the policy.
2009-08-17[msc] Move gsm_04_08.c, mncc and various others to libmscHolger Hans Peter Freyther1-1/+1
Currently we have circular dependencies from libbsc to libmsc and this requires to play some linker tricks. The problem will be solved in two ways, first we will get rid of the circular dependencies and second we can start using --start-group and --end-group of the linker to play the tricks for us.
2009-08-17[msc] Introduce a libmsc.a libraryHolger Hans Peter Freyther1-1/+1
Attempt to split up bsc/msc functionality according to the specs. The libbsc.a will be responsible for communicating with the BTS, configuring it, paging, channel allocation and passing layer3 messages in both ways. libmsc.a will implement the policy and such.
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-25 22:36:55 +0000