Age | Commit message (Collapse) | Author | Files | Lines |
|
This is to avoid naming conflicts with the new osmo-bsc, which resides
in its own git repository (osmo-bsc.git) and which uses libosmo-sigtran
and implements (primarily) 3GPP AoIP.
Change-Id: If10d1599b62d010726336134091a4e855c380d93
|
|
The GPRS related programs osmo-sgsn, osmo-gtphub and osmo-gbproxy
have been split off into the separate osmo-sgsn repository, which
can be found at
git://git.osmocom.org/osmo-sgsn.git
http://git.osmocom.org/osmo-sgsn/
This is technically unrelated but conceptually part of the larger
NITB-split activities.
I did a brief log of all changes in src/gprs and couldn't find any
commits that we might have applied here but which are missing from
osmo-sgsn.git.
Change-Id: If60e28b23f5cfb2c4eb354951363a2bb63f3e0de
|
|
The library code for rate counter initialization, which is called
from the descendants of bsc_network_alloc() might already want to
log something (particularly after Change-Id
Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56 in libosmocore), so the
logging framework must be initialized before.
Change-Id: I1e893c97e023e63489fe8c46539b5e507d3cec8f
|
|
* log administrative state transitions
* log what's caused it
* while at it, mark boolean variable as such
Cherry-picked from osmo-bsc be356ed32fbd28dc8d1460371d9e47511b20ac63
Change-Id: I3e25a19fac4d0b4886d825c9876771b1f66efe58
Related: SYS#3864
|
|
unsigned long can be 32 bits on some arch/OS, while "current" field is
always 64 bit because it's a uint64_t.
Change-Id: I9719c69ef661bb46d8bb43cf8d6537c3e8d47826
|
|
Related: OW#3893
Program terminated with signal SIGSEGV, Segmentation fault.
0 gsm_lchan_name (lchan=lchan@entry=0x0) at gsm_data_shared.c:342
(gdb) bt
0 gsm_lchan_name (lchan=lchan@entry=0x0) at gsm_data_shared.c:342
1 0x0805ab80 in lchan_release (lchan=0x0, sacch_deact=sacch_deact@entry=0, mode=mode@entry=RSL_REL_LOCAL_END)
at chan_alloc.c:410
2 0x0805c1dd in handle_ass_fail (msg=0x94142b8, conn=0x9251048) at bsc_api.c:459
3 dispatch_dtap (msg=0x94142b8, link_id=0 '\000', conn=0x9251048) at bsc_api.c:598
4 gsm0408_rcvmsg (msg=msg@entry=0x94142b8, link_id=0 '\000') at bsc_api.c:658
5 0x08058ca2 in abis_rsl_rx_rll (msg=0x94142b8) at abis_rsl.c:1686
6 abis_rsl_rcvmsg (msg=0x94142b8) at abis_rsl.c:2097
7 0xb7e8cf9a in handle_ts1_read (bfd=0x94e8e08) at input/ipaccess.c:271
8 ipaccess_fd_cb (bfd=0x94e8e08, what=1) at input/ipaccess.c:386
9 0xb7ee8434 in osmo_select_main (polling=polling@entry=0) at select.c:158
10 0x0804bd7c in main (argc=6, argv=0xbfc27144) at osmo_bsc_main.c:272
(gdb) print lchan
$2 = (const struct gsm_lchan *) 0x0
Possible scenario in which this crash can appear:
1- gsm0808_assign_req() calls handle_new_assignment() which sends an CHAN
ACTIVATE msg and arms T10 timer.
2- ACTIVATE ACK is received (handle_chan_ack), which calls
gsm48_send_rr_ass_cmd() which sends an ASSIGNMENT CMD, and doesn't
disable/modify T10 timer.
3- T10 timeout is triggered (assignment_t10_timeout()), which sets
conn->secondary_lchan = NULL
4- Immediately after, the ASSIGNMENT FAILURE message (which might have been
already queued) is processed in handle_ass_fail, and then the crash occurs.
This race condition is not an issue for handle_ass_compl() path because there's
this check there which would trigger most probably if secondary_lchan is NULL:
"if (conn->secondary_lchan != msg->lchan)"
Change-Id: Ied5bd90b9c06f27135a2e3c46e40d49d27d9a387
|
|
In masurement reports sent by the MS, this can then be used to correlate
if a given measurement report was in response to a BCCH/neighbor list
received on BCCH (SI2xxx) or on dowlink SACCH (SI5xxx).
Closes: OS#2525
Change-Id: I1cd0dc51026dcd0e508e63eea4e333e6b184787a
|
|
Change-Id: I5afc6e6a5a1d6b6a8ee73fdb60cc28074cf8585b
|
|
Save the time when OML link to BTS was established and show it in
vty. That's useful when troubleshooting issues like periodic/sporadic
BTS restart.
Related: SYS#3889
Change-Id: I9e4e8504afe8ca467b68d41826f61654e24d9600
|
|
Remove trivial functions by using more specific defines for CTRL
commands.
Change-Id: I719b75b6ca1e9372ea11e7e9ff7896021f357035
|
|
This patch just makes the log match chronologically what
is happening. We receive the deliver_sm_resp before we send
the RP ACK to the MS.
Change-Id: I29270652957f58093be8bf7f2e898b0b4933bd93
|
|
If smpp_first is set off and there is a local receiver for this sms,
then return 0. Without this patch, we return 'rc' which is uninitialized
in the scenario that I'm describing above.
Change-Id: I0c0bcd919cc3275d491995d17c6a32bb61c6afe1
|
|
Fix four instances of VTY tests working because it used to include implicit
'exit' commands to the parent node.
Since libosmocore change-id Id73cba2dd34676bad8a130e9c45e67a272f19588 = commit
d64b6aed235f6e4d84a2cb8e84b32c3179260254, we no longer do this implicit-exit in
interactive VTY shells.
*) the nitb node lacked the default command set (including 'end' and 'exit'),
so it was impossible to leave the nitb node. This hit in
testSubscriberCreateDelete. Add vty_install_default(NITB_NODE).
*) in testPingPongConfiguration, the intention is to enter the /msc 0 node.
Drop prior entry of the 'network' node, which looks like an oversight. So
far the 'msc 0' caused an implicit 'exit' and thus worked, now fails.
*) Two instances following comments "# Check searching for outer node's
commands", which look like they are intended to check for this implicit-exit
behavior. This is obsolete, drop those parts of the tests.
Change-Id: I77931d6a09c42c443c6936000592f22a7fd06cab
|
|
Annotate this esme route, so we can use it to return -EINPROGRESS to
skip sending premature RP-ACK to the mobile station, in case we're
handling sms routes through SMPP.
Now that we have this information in place, we use it wherever possible
to avoid kludgy checks on sms->receiver.
sms_free() already releases references to this object, so we should be
fine with this.
Fixes: 4e5b90a594f9 ("libmsc: remove 'deferred' parameter in sms_route_mt_sms()")
Change-Id: Ib8a8fd9bbb0d3b6aff7931e4bacbea99d000e484
|
|
Handover attempt for power budget case should be performed every N SACCH frames,
where N = Power Budget Interval.
First measurement report with mr->nr = 0 was used for the first handover attempt
in this case, which is not correct, because first usable report should have
mr->nr = net->handover.pwr_interval-1.
Moreover using the first measurement report with mr->nr = 0 for handover attempt
could lead to unnecessary handover, because usually av_rxlev for first measurement report
from MS is worse than for following reports.
Change-Id: If7f54a4cb179eaa9e5eb147b9477633ac618e69e
|
|
According to 3GPP TS 44.018 §1.8 the "network shall never enable PBCCH
and PCCCH".
Change-Id: I319e71a4b0c682361529e9c21377398a826b934b
Related: OS#2400
|
|
When somebody kills the process, it's best to handle the signal
and to use the opportunity for some cleanup. We always did this
in the NITB on SIGINT, but never on SIGTERM. Let's change it.
Change-Id: Iea6804325a6575ceab5edfd28dd20249462f143b
|
|
This option was present in very early versions of the NITB, but
at least since 2011 it is no longer supported. It's still listed
in --help output, which is wrong.
Change-Id: I1d2cceb588ec5fb34ec5e2c05a7d8c93310bee88
|
|
Set the time on the status report to the time the message was delivered, as
this may not be the same as the time when we are delivering the report to the
originating MS.
Change-Id: I9056429d40bf02731f004b7833f1de45a0d1add8
|
|
Change-Id: I6ed923f5c60a8d64305f4b8e90d1362d6510e1c5
|
|
Change-Id: Ibe3c8bd353b3a178e26b0936f25b2e1959f9990c
|
|
libsmpp34 already converts received TLV integer values to native
endianess in libsmpp34_(un)pack.
Converting them again at receive time swaps the 2 bytes of
user_message_reference, then using a wrong value. As GSM03.40 spec
uses only 1 byte for the id, then only the high byte of the initial
value is used and eventually sent back to the ESME. Again, at that time,
htons() is not needed because libsmpp34 already handles that part.
See OS-#2429 for more details.
Change-Id: If748548a4a223e529a1110c89e483b599b406e8b
|
|
I already stumbled into 2 compilation environments which had Werror
enabled for -Wmaybe-uninitialized and the build failed, so let's
workaround this warning.
| smpp_openbsc.c: In function 'handle_smpp_submit':
| smpp_openbsc.c:216:9: error: 'sms_msg_len' may be used uninitialized in this function [-Werror=maybe-uninitialized]
| memcpy(sms->user_data, sms_msg, sms_msg_len);
| ^
| smpp_openbsc.c:100:15: note: 'sms_msg_len' was declared here
| unsigned int sms_msg_len;
| ^
| cc1: some warnings being treated as errors
Change-Id: I0901ddadb5f72e1585cb1797ac22c8ab95e83146
|
|
gsm_04_11.c sms_report_alloc()
Use the sms->text, not the sms->user_data to construct the report body.
This also prevents the potential output of non printable characters to
the log and or vty.
Change-Id: Id51bc9483ad6f52d6da74135605cfd12434c7c96
|
|
gsm_04_11.c: gsm340_gen_sms_status_report_tpdu()
When we construct the status report PDU, use sms->src
instead of sms->dst as the destination address
This way we tell the MS that the message was delivered
to the destination and not to itself.
This is relevant for phones that display a textual
representation of the delivery report.
Change-Id: I2d4f87ac777465de9bfb5a775a789a2691755ee9
|
|
Use new definitions in libsmpp34 to set the registered_delivery field
accordingly, as provided by I5b3afff1b3b77cccd949e0606914c7ac3ba6114c.
Moreover, do not set this header field to zero if status reports are
off, the deliver_t structure has been already zeroed so this not
required.
Change-Id: Ie78e17323796120f576b9c0e1bc5ccc32da8ee12
|
|
In 2015, Jacob moved/copied related functions to libosmocore, but
for some reason didn't remove the copies here. Let's follow-up on
that and remove duplicated code.
The libosmocore commit introducing osmo_apn_to_str() was
8114294bf29ac6e44822c0ae43d4b0819f11b022
Change-Id: I7315ffcbed8a54cca2056f313bb7783ad82d0ee9
|
|
We can only print libgtp pdp information if a library context is
attached to this pdp context. This is not always the case,
particuarly during some teardown scenarios.
Change-Id: Ia3184877f9709db65f5f93a98403f2ef5b04a8ca
|
|
When converting from GSM_PCHAN_PDCH, we should generate
a RSL channel number IE with the osmocom extension
RSL_CHAN_OSMO_PDCH rather than claiming it is a regular
TCH/F channel.
This is important as this function is used by
osmo-bts, too - and it decides which channel number IE is
put in the GSMTAP header for both GSMTAP tracing as well
as the GSMTAP based osmo-bts-virtual.
In order to avoid any unintended effect on libbsc,
we make sure to modify rsl_ipacc_pdch_activate() to
always use GSM_PCHAN_TCH_F in related RSL message.
Change-Id: Ie34219e64a6d89da4a79f2db8ec73d1909fb8280
|
|
In the PDP Context Create from SGSN to GGSN, we include information
about the RAN type (GERAN/UTRAN) and the Cell of the MS. This was
all hard-coded to GERAN, and wasn't updated when we added UTRAN
support to the SGSN.
Change-Id: I6c79e42c5e08b28fe8182555302a5505fbbaa313
|
|
Commit 575420637981828b64c1292ada015d7170b89390 introduced
OSMUX_STATE_NEGOTIATING to fix a race condition present in osmo-bsc_nat.
However, after this change osmo-bsc_mgcp cannot switch to
OSMUX_STATE_ACTIVATING anymore, which means during osmux_send_dummy time
it won't call osmux_enable_endpoint(), which in turn won't set endp type
to MGCP_OSMUX_BSC.
If MGCP_OSMUX_BSC is not set, uplink streams are sent using regular RTP
instead of Osmux not matter it is enabled in config or not.
Change-Id: Ibcb59aa1ca25408f82cc88c2d5b81177b5f276dc
|
|
moving this connection to another bts
In case of successful completion of handover gsm_subscriber_connection could be moved from one bts to another,
so connection link to bts should be replaced by link to bts, which owns new_lchan.
This bug was detected, because conn->bts->nr is used in call control log messages
and wrong number of bts was observed in these messages after handover.
Change-Id: Idc7dd412b7580c451e716b73ef7549826c60b0d9
|
|
Change-Id: Icb1e7cb15fe04642578f5292124ebc1eac9c9aa3
|
|
Fixes regression probably introduced in c696cc28.
For bts>0 logging doesn't show bts number correctly when printing lchan
identification string - it will always show it as "bts=0". The reason for
this is that the identification string is cached before bts->nr value is
set to a proper value.
This patch sets bts->nr as part of the first step of the bts structure
initialization, before caching happens thus making sure the cached
identification string is cached with the correct values.
Change-Id: I61c18a7f021fcb1ec00d34a745f4e3ab03416c2d
|
|
Replace magic numbers by esm_class definitions, which
have been added to latest libsmpp34 in Change-Id
I91afd8b462b8fd3b2c4c5b54f4eeb7ec5b730b65
Change-Id: I6c458690da60c8f3637680efbd718f6e8c6feb4c
|
|
submit_to_sms() now handles two TLVs, so find_tlv() is suboptiomal and
it can be removed, since it would result in two passes on the TLV list.
Use new smpp34_tlv_for_each() helper to iterate over the list of TLVs
that is available since I446929feed049d0411e1629ca263e2bc41f714cc.
Change-Id: I53a65164a6cc4abc6bf57d9a8dc275cf21c90222
|
|
The change-id I7276d356d805a83ebeec72b02c8563b7135ea0b6 added msg_ref to
the databse but forgot to remove the comment stating it's not being
stored.
Change-Id: I204f098c8f2a480405446113e2181b2c53700cf3
|
|
gsm340_gen_oa() returns a negative value if the output buffer that the
caller passes is too small, so we have to check the return value of this
function.
Fixes: CID 174178
Fixes: CID 174179
Change-Id: I47215d7d89771730a7f84efa8aeeb187a0911fdb
|
|
This patch adds support for GSM 03.40 in nitb mode.
MS GSM 03.40 SMSC
| |
| SMS-SUBMIT |
|--------------------------->|
| GSM 04.11 RP-ACK |
|<---------------------------|
| SMS-DELIVER |
|<---------------------------|
| GSM 04.11 RP-ACK |
|--------------------------->|
| SMS-STATUS-REPORT |
|<---------------------------|
| GSM 04.11 RP-ACK |
|--------------------------->|
| |
Change-Id: I5cc7bb4ebadde0940f44d10c3df34707b0615160
|
|
This patch adds gsm340_sms_send_status_report_tpdu() to build a
status-report. Moreover, set sms->report field if we see a SMPP
SUBMIT_SM with Delivery Acknowledgment esm_class, so this identifies
that this is a delivery report.
MS GSM 03.40 SMSC SMPP 3.4 ESME
| | |
| | SUBMIT-SM |
| | esm_class = Delivery Ack |
| |<-------------------------------|
| | SUBMIT-SM-RESP |
| |------------------------------->|
| | |
| SMS-STATUS-REPORT | |
|<----------------------------| |
| GSM 04.11 RP-ACK | |
|---------------------------->| |
| | |
There is a FIXME message in this patch, that I just copied from
gsm340_gen_sms_deliver_tpdu() since TP-MMS is not supported by OpenBSC.
Change-Id: Ib70e534840308ed315f7add440351e649de3f907
|
|
Simple patch to test the new status-report support code, remove previous
code before Delivery Acknowledgement support was in place. Use
LOGL_DEBUG for logging messages here as suggested by Neels and Harald.
Change-Id: I877e228d8e174430f700631edbf9955972da7892
|
|
SMPP DELIVER_SM messages with esm_class = Delivery Receipt need to send
this message reference (that the mobile phone allocates) to the ESME.
Thus, the ESME propagates it via SUBMIT_SM with esm_class = Delivery
Acknoledgment so that the SMSC sends the GSM 03.40 status-report to the
origin including this. Given this field is useful for status-reports, we
need to store it in the HLR database.
Moreover, we need a new field that specifies if the entry represents a
SMS status-report, to do the right handling from the gsm411_send_sms() -
such new handling comes in a follow up patch entitled "libmsc: handle
delivery ack via SMPP SUBMIT SM / send GSM 03.40 status report".
This patch includes the migration routines to the new database schema
revision 5, it's quite a bit of dbi boilerplate code - copied-pasted and
adapted.
Change-Id: I7276d356d805a83ebeec72b02c8563b7135ea0b6
|
|
If the mobile phone requests a status report via SMS, send a DELIVER_SM
with esm_class = Delivery Receipt to ESME to indicate that the SMS has
been already delivered to its destination.
MS GSM 03.40 SMSC SMPP 3.4 ESME
| | |
| SMS-DELIVER | |
|<----------------------------| |
| GSM 04.11 RP-ACK | |
|---------------------------->| |
| | DELIVER-SM |
| | esm_class = Delivery Receipt |
| |------------------------------->|
| | DELIVER-SM-RESP |
| |<-------------------------------|
| | |
This patch implements "Appendix B. Delivery Receipt Format" as specified
in the SMPP 3.4 specs. This string is conveyed in the SMS message as
data, and it is only meaningful to the ESME, for logging purposes. The
"submit date" and "done date" are not yet set, and other fields are just
sent with dummy values, so they are left to be finished as future work.
The new SMPP TLV tag TLVID_user_message_reference is added to the SMPP
messages inconditionally now since this information is required by
delivery-reports to associate the status-report with the original SMS.
Change-Id: Ic1a9023074bfa938099377980b6aff9b262fab2a
|
|
Useful to test the delivery receipt support. This TLV contains the
GSM03.40 message reference.
Change-Id: I1b0abaa7e06ffe1bd2242c70813d8b70e9fa954f
|
|
Just munch and log SMPP delivery receipts by now, don't mirror this, it
is going to break things in openbsc.
Follow up patch removes this and mirrors this SMPP message as a
SUBMIT_SM with esm_class = Delivery Acknowledgement.
Change-Id: I78e93bc4034679e238c8642ccf6a0e844b1d6d8b
|
|
To test delivery reports using this utility.
Change-Id: I0e477407531fdd4d906e53c9b5a48a79a239966f
|
|
So we just store 0 or 1 depending on what the mobile phone requests.
Change-Id: Idb7d5594219c0e458ccb561383a59604bc1a4201
|
|
Restore the sms status report request flag from SUBMIT_SM.
Change-Id: Iac05252253f8933a3875b4904599b7a225191a4b
|
|
Propagate the status report request field to the SMPP message through
the registered_delivery field, so the ESME knows that the mobile phone
is asking for explicit delivery acknowledgment is required. See SMPP 3.4
specs section 5.2.17.
Change-Id: I59af60fa89cd10ae973c5e122789e3e03e3728ee
|
|
Rationale: allows seeing all timer defaults at once by doing
OsmoBSC(config-net)# timer ?
Before, defaults are visible only by doing on each timer:
OsmoBSC(config-net)# timer t1234 <tab>
Change-Id: I8259234e5c62e058dde56d531071440bbab11462
|