Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
|
|
gcc does not really know the _NR_OF_ELEMENTS_IN_ENUM approach, add
the _NUM_GSM_BTS_TYPE to the handled cases.
gsm_data.c: In function ‘gsm_set_bts_type’:
gsm_data.c:349:2: warning: enumeration value ‘_NUM_GSM_BTS_TYPE’ not handled in switch [-Wswitch]
|
|
|
|
this uses vty_cmd_string_from_valstr() from _very_ recent libosmocore,
so you have to update the library, sorry.
|
|
so far, osmo-bts/sysmobts used to be entered as "sysmobts" type in the
configuration file. However, there are some differences in the
protocol/behaviour and we should reflect that by a new BTS plugin (with
lots of code reuse from the nanobts driver).
|
|
this is primarily needed on the BTS side, but we should also use it on
the BSC side and make the parameters VTY-configurable.
|
|
|
|
|
|
Rather than using openbsc internal data/functions, we now use only
internal and libosmocore-provided ones.
|
|
This timer will only be forwarded to BS11 and Ericsson Abis so far,
not to Nokia and ip.access BTS yet.
|
|
|
|
|
|
We now have a list of MSCs but in the code we will
try to access the MSC with the nr 0.
|
|
We want to have multiple MSCs but we also have some data
that is only present on a per BSC basis. Right now the
MSC data is not allocated with talloc, so we have some
change in the talloc contexts.
|
|
Assume nothing special needs to be done for the Nokia
*site hardware.
GCC warning:
gsm_data.c: In function ‘gsm_set_bts_type’:
gsm_data.c:342:2: warning: enumeration value ‘GSM_BTS_TYPE_NOKIA_SITE’ not handled in switch [-Wswitch]
|
|
gsm_data_shared.h includes e1_input.h of libosmo-abis, add the
LIBOSMOABIS_CFLAGS to Makefile.am, remove AM_LDFLAGS at the same
time as we only build .a archives.
|
|
|
|
In order to have the MNCC application reliably decide on the codec type,
it needs to know if we are running on a TCH/F or TCH/H. Thus, we pass
lchan_mode as a new parameter to the 'struct gsm_mncc'
|
|
Move the regexp parsing code from the NAT to libcommon as it will
be used by the NAT and BSC code. This also adds the #include <regex.h>
include to gsm_data. This header should be split up.
|
|
This is a big patch that ports openBSC over libosmo-abis.
Sorry, the changes that are included here are all dependent
of libosmo-abis, splitting them into smaller pieces would
leave the repository in some intermediate state, which is
not desired.
The main changes are:
- The directory libabis/ has been removed as it now lives in
libosmo-abis.
- new configuration file format for nanoBTS and HSL femto, we
need to define the virtual e1_line and attach it to the OML
link.
- all the existing BTS drivers (nanoBTS, hsl femto, Nokia site,
BS11 and rbs2000) now use the new libosmo-abis framework.
- use r232 input driver available in libosmo-abis for bs11_config.
- use ipa_msg_recv instead of old ipaccess_read_msg function.
- delete definition of gsm_e1_subslot and input_signal_data.
These structures now lives in libosmo-abis.
Most of this patch are deletions of libabis/ which has been
moved to libosmo-abis.
This patch also modifies openBSC to use all the new definitions
available in libosmocore and libosmo-abis. In order to do that,
we have replaced the following:
- DINP, DMI, DMIB and DMUX by their respective DL* correspondences.
- SS_GLOBAL by SS_L_GLOBAL
- SS_INPUT by SS_L_INPUT
- S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN
- SS_INPUT by SS_L_INPUT
- S_INP_* by S_L_INP_* sub-signals
- E1INP_NODE by L_E1INP_NODE vty node
This patch has been tested with:
- one nanoBTS
- the HSL femto with the examples available under libosmo-abis
- BS11 with both dahdi and misdn drivers.
|
|
This includes the MetroSite, but also other Nokia BTS models.
|
|
|
|
Reset the BTS MO State on BTS bootstrap. This way we will always
test the BTS disconnect/reconnect case of the BTS.
Do not reset the administrative state of objects. The BSC might
have set these and wants to maintain them across disconnect/
reconnect. Right now this is true for the TRX state.
|
|
When we loose the A-bis link, we should properly re-set the
administrative, operational and availability state of all MOs
|
|
... this way osmo-bts can use them
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This facilitates the use of gsm_data.c from osmo-bts
|
|
This allows us to configure a TSC for each timeslot, not just one globally for
the entire BTS.
|
|
... as a common wrapper around nm_attr and nm_state
|
|
Thanks to Holger for noticing this.
|
|
The daemons set up nanoBTS and HSL femto sockets by default, ie. the
three sockets to support these two drivers are open even if we have
no BTS of that kind.
This patch enables on-demand socket creation, ie. we only enable them
if we have one BTS at least that requires it.
I added two new attributes to the gsm_bts object, they are:
* the start() function includes the code that we need to run to start
the BTS. This new function contains the socket creation in the
particular case of nanoBTS and HSL femto.
* the started boolean, which is used to know if we have already
started the BTS, ie. we have already invoked start().
Note that, I have splitted the bts_model_*_init() function into two
functions, the _init() functions that register the BTS driver
and the _start() functions that start BTS driver on-demand.
While I was at it, I added several changes/cleanups to this patch:
* Group all bts_model_*_init() calls into one function bts_init(),
which is called in the initialization path of osmo-nitb and
osmo-bsc.
* Add openbsc/bss.h that contains the declaration of
bsc_bootstrap_network, bsc_shutdown_net and bts_init.
* Add missing e1inp_init() in osmo-bsc.
* Fix missing declaration of hsl_setup in openbsc/e1_input.h
|
|
Summary of changes:
s/struct counter/struct osmo_counter/g
s/counter_inc/osmo_counter_inc/g
s/counter_get/osmo_counter_get/g
s/counter_reset/osmo_counter_reset/g
s/counter_alloc/osmo_counter_alloc/g
s/counter_free/osmo_counter_free
|
|
Summary of changes:
s/struct bsc_fd/struct osmo_fd/g
s/bsc_register_fd/osmo_fd_register/g
s/bsc_unregister_fd/osmo_fd_unregister/g
s/bsc_select_main/osmo_select_main/g
|
|
Introduce a paging group that a BSC can refer to and is used
during the LAC lookup. This way paging can be flooded through
the network and just filtered at the last element in the core.
|
|
Be able to configure a list of destinations (duplicates allowed)
that will be tried in a round robin fashion. The change is in
the bsc_msc_connection to operate on a list. We achieve the
round robin nature with the same trick used in the paging code
to delete and append the current entry. The nat code was updated
to compile but one can only configure one destination.
|
|
|
|
These are not needed any more. We used them for u_int
types but we now use uint which comes from stdint.h
|
|
This was done with sed on the files.
|
|
This patch extends the make_sock() prototype so you can fully set
the fields priv_nr and data of the bsc_fd structure.
This is the first step to get rid of the internal make_sock()
implementation that ipaccess-proxy uses.
This patch includes a minor cleanup to pass INADDR_ANY instead
of zero, if you do not want to bind the socket to one specific
address.
|
|
The VTY code calls the write function for nodes in the order of
registration of the node and not in terms of hierachy of nodes. This
means that the e1_input code is written before the MSC node that
was the child of the network. Make the MSC_NODE a direct descendant
of the CONFIG_NODE and avoid this issue.
|
|
libosmogsm is a new library that is distributed in the libosmocore.
Now, openbsc depends on it. This patch gets openbsc with this
change.
This patch also rewrites all include path to the new
osmocom/[gsm|core]
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
|
|
|
|
The HSL Femtocell seems to be a poor man implementation of the
ip.access Abis/IP protocol, but cutting corners wherever possible.
We try to workaround those corners wherever possible...
|
|
... and make sure tests work again after restructuring
|