Age | Commit message (Collapse) | Author | Files | Lines |
|
The signature of mr_config and the BSC implementation didn't
match and the compiler was warning about it:
osmo_bsc_api.c:530:2: warning: initialization from incompatible pointer type
.mr_config = bsc_mr_config,
^
osmo_bsc_api.c:530:2: warning: (near initialization for ‘bsc_handler.mr_config’)
Change the mr_config again and provide an implementation
that will set the ms and bts data structure. It would be
better to put the size outside of the IE but I am not going
to change it right now. It would also be nice to either move
the AMR setting into the "nitb" structure or have the msc
data be used _after_ the bts settings. This needs to be
cleaned up in the next step.
Manually verified by placing a MO call and checking that
both the channel mode modify and the mode modify request
contain the multi rate config with the rate mr config
(length two bytes, version 1, icmi==1, no start mode being
set).
|
|
This way a lot of if/else can just be killed by the caller deciding
which of the two instances to use.
I have copied both branches to new files, replace bts for ms in one
of them and ran diff on it. There is no difference.
|
|
|
|
|
|
Send a non-call related SS message for an active call indentified
by the CIC of that call. As an ugly hack the order of the SS
release and the invocation are changed. That was necessary for the
E71 on a TCH. The time between notify and release was just too short.
The right would be to wait for the returnResultLast but this would
involve keeping more local state. Let's see how far we get here. It
might be necessary to change the order in the other call sites as
well.
|
|
Timing advance is stored inside lchan structure, so it is removed from
arguments. This is useful, if other actions are required prior calling
rsl_chan_activate_lchan. (like deactivating PDCH first)
The "shifted TA value" that is required by BS11 is now calculated inside
rsl_chan_activate_lchan and not by each user.
[Rebased by Holger. So some hunks were skipped as the patch
depended on Jolly's HO code]
|
|
E1 based BTS use TRAU muxer to decode TRAU frames. After changing
channel from one timeslot to another (due to handover or assignment),
the TRAU muxer must be updated. The call reference of the call is
disconnected from the old channel and connected to the new channel.
|
|
bsc_api.c:417:3: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘unsigned int’ [-Wformat]
bsc_api.c: In function ‘handle_ass_fail’:
bsc_api.c:458:3: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘unsigned int’ [-Wformat]
db.c: In function ‘db_sync_subscriber’:
db.c:785:3: warning: format ‘%i’ expects argument of type ‘int’, but argument 8 has type ‘time_t’ [-Wformat]
osmo_msc.c: In function ‘msc_release_connection’:
osmo_msc.c:145:20: warning: unused variable ‘trans’ [-Wunused-variable]
smpp_smsc.c: In function ‘link_accept_cb’:
smpp_smsc.c:891:24: warning: assignment from incompatible pointer type [enabled by default]
smpp_smsc.c:271:1: warning: ‘esme_by_system_id’ defined but not used [-Wunused-function]
smpp_openbsc.c: In function ‘smpp_openbsc_init’:
smpp_openbsc.c:545:2: warning: implicit declaration of function ‘smpp_vty_init’ [-Wimplicit-function-declaration]
osmo_bsc_ctrl.c: In function ‘verify_bts_loc’:
osmo_bsc_ctrl.c:340:19: warning: variable ‘height’ set but not used [-Wunused-but-set-variable
smpp_mirror.c: In function ‘main’:
smpp_mirror.c:297:2: warning: implicit declaration of function ‘osmo_init_logging’ [-Wimplicit-function-declaration]
|
|
Handle the mr_config request and set the AMR multirate config for
the given MSC. Initialize the mr_config with the AMR5.9 default we
have been using until now.
|
|
Done with the semantic patch:
@rule1@
expression E;
expression F;
@@
- lchan_release(E, F, 1);
+ lchan_release(E, F, RSL_REL_LOCAL_END);
@rule2@
expression E;
expression F;
@@
- lchan_release(E, F, 0);
+ lchan_release(E, F, RSL_REL_NORMAL);
|
|
|
|
A function called this way should return 1 if it is compatible, so
something like "if (!chan_compat_with_mode())" will check if it is not
compatible.
|
|
While generally we should log troly unknown RR messages, we can simply
pass along RRLP messages (which aren't unknown!)
In real networks, the RRLP would probably not end up at the MSC, but
well, sometimes we don't care what real/classic networks do.
|
|
|
|
|
|
Call the channel by the right name.
|
|
In case the connection should not be created/accepted release
the channel by sending a RR Release and de-activating the
SACCH. Phones should deal better with that behavior.
|
|
In case the call handling starts on a TCH/H switch to a TCH/F
if fullrate is requested. Add a method that is used to determine
if the mode and current channel are compatible with each other.
|
|
RR Messages like STATUS, GPRS SUSPEND, HANDOVER COMPLETE/FAIL, ...
should be processed on the BSC side of things, not on the MSC side.
This is among other things required in preparation of intra-BSC
hand-over support in osmo-bsc.
|
|
This prevents osmo-bsc from sending RR messages to the MSC and rather
process them inside the BSC and turn them into BSSAP CM UPDATE.
|
|
The osmo-nitb application sometimes crashes because the BSC API
is doing an assignment underneath which is not handled by the code,
add dumy handlers to not crash, the right thing to do is to change
MNCC to have an assignment that can succeed/fail.
The keyword to look for is MNCC_LCHAN_MODIFY and mncc_sock should
wait for an ack/nack but right now the call just continues.
|
|
|
|
When gsm48_send_rr_ass_cmd() is being called to send the ASSIGNMENT
COMMAND, we need to use the propwer lchan->ms_power setting, not
some fixed magic "0x3" number.
Without this patch, every MS would transmit at a very high output power
fullowing an assignment command - more than what was set in the config
file with "ms max power"
|
|
In case of a nack the secondary_lchan will be NULLed but then the T10
timeout will attempt to release the channel and we will try to release
a NULL pointer.
Daniel witnessed this crash at the camp and added the NULL check at:
28d9ccbca0cb522c90f551cf4bf243acab7a1944, it is also the proper fix
given the _NAK handling.
|
|
Move it to one place so it is more easy to make changes to
that.
|
|
This patch modifies openBSC code to use msg->dst which stores the
pointer to the signalling link structure instead of the pointer to
the transceiver structure.
This patch prepares the introduction of libosmo-abis.
|
|
It is possible that MNCC sends a MNCC_LCHAN_MODIFY and
wants a channel mode that is not possible on the current
lchan, in that case a new channel is assigned. We now crash
as the osmo-nitb is not having an assignment complete handler,
add a NULL check.
|
|
|
|
Summary of changes:
s/signal_cbfn/osmo_signal_cbfn/g
s/register_signal_handler/osmo_signal_register_handler/g
s/unregister_signal_handler/osmo_signal_unregister_handler/g
s/dispatch_signal/osmo_signal_dispatch/g
|
|
Summary of changes:
s/struct timer_list/struct osmo_timer_list/g
s/bsc_add_timer/osmo_timer_add/g
s/bsc_schedule_timer/osmo_timer_schedule/g
s/bsc_del_timer/osmo_timer_del/g
s/bsc_timer_pending/osmo_timer_pending/g
s/bsc_nearest_timer/osmo_timers_nearest/g
s/bsc_prepare_timers/osmo_timers_prepare/g
s/bsc_update_timers/osmo_timers_update/g
s/bsc_timer_check/osmo_timers_check/g
|
|
This was done with sed on the files.
|
|
libosmogsm is a new library that is distributed in the libosmocore.
Now, openbsc depends on it. This patch gets openbsc with this
change.
This patch also rewrites all include path to the new
osmocom/[gsm|core]
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
|
|
... and make sure tests work again after restructuring
|