Age | Commit message (Collapse) | Author | Files | Lines |
|
This fixes a bug in the following circumstances:
* BSIC is set to 0 in the config file
* No TSC is explicitly specified at the BST level in the config file
In this case, we ended up using BSIC=0 and TSC=7, as TSC=7 is our
default initialization value.
The TSC of the CCCH/BCCH must always be the BCC, which is the lower 3
bits of the BSIC. Having configuration options for both the BSIC _and_
the TSC at the BTS level therefore makes no sense, as it only adds ways
in which users can configure non-oprational configurations. So we
remove the bts->tsc member, and keep only the ts->tsc members that allow
us to configure a timeslot-specific TSC that's different from the BTS
TSC (= BCC).
|
|
|
|
Close the file when the stat is failing.
Fixes: Coverity CID 1040711
|
|
Fixes: Coverity CID 1040738
|
|
Fixes: Coverity CID 1040710, CID 1040711
|
|
Assume that there is a bsc_gsmnet and modify the ipaccess-config to
provide this symbol. If a bsc_gsmmnet is not available when linked
the linker will complain and fail.
E.g. give an error like this:
../../src/libbsc/libbsc.a(bts_ipaccess_nanobts.o): In function `ipaccess_sign_link_up':
src/libbsc/bts_ipaccess_nanobts.c:550: undefined reference to `bsc_gsmnet'
|
|
This is a big patch that ports openBSC over libosmo-abis.
Sorry, the changes that are included here are all dependent
of libosmo-abis, splitting them into smaller pieces would
leave the repository in some intermediate state, which is
not desired.
The main changes are:
- The directory libabis/ has been removed as it now lives in
libosmo-abis.
- new configuration file format for nanoBTS and HSL femto, we
need to define the virtual e1_line and attach it to the OML
link.
- all the existing BTS drivers (nanoBTS, hsl femto, Nokia site,
BS11 and rbs2000) now use the new libosmo-abis framework.
- use r232 input driver available in libosmo-abis for bs11_config.
- use ipa_msg_recv instead of old ipaccess_read_msg function.
- delete definition of gsm_e1_subslot and input_signal_data.
These structures now lives in libosmo-abis.
Most of this patch are deletions of libabis/ which has been
moved to libosmo-abis.
This patch also modifies openBSC to use all the new definitions
available in libosmocore and libosmo-abis. In order to do that,
we have replaced the following:
- DINP, DMI, DMIB and DMUX by their respective DL* correspondences.
- SS_GLOBAL by SS_L_GLOBAL
- SS_INPUT by SS_L_INPUT
- S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN
- SS_INPUT by SS_L_INPUT
- S_INP_* by S_L_INP_* sub-signals
- E1INP_NODE by L_E1INP_NODE vty node
This patch has been tested with:
- one nanoBTS
- the HSL femto with the examples available under libosmo-abis
- BS11 with both dahdi and misdn drivers.
|
|
This facilitates the use of gsm_data.c from osmo-bts
|
|
Use the libosmocore code to ignore certain signals by
default (e.g. SIGHUP, SIGPIPE) and use the new code to
create a default stderr logging target and initialize
it properly.
|
|
Summary of changes:
s/bcd2char/osmo_bcd2char/g
s/char2bcd/osmo_char2bcd/g
s/hexparse/osmo_hexparse/g
s/hexdump/osmo_hexdump/g
s/hexdump_nospc/osmo_hexdump_nospc/g
s/ubit_dump/osmo_ubit_dump/g
s/static_assert/osmo_static_assert/g
|
|
Summary of changes:
s/signal_cbfn/osmo_signal_cbfn/g
s/register_signal_handler/osmo_signal_register_handler/g
s/unregister_signal_handler/osmo_signal_unregister_handler/g
s/dispatch_signal/osmo_signal_dispatch/g
|
|
Summary of changes:
s/struct bsc_fd/struct osmo_fd/g
s/bsc_register_fd/osmo_fd_register/g
s/bsc_unregister_fd/osmo_fd_unregister/g
s/bsc_select_main/osmo_select_main/g
|
|
These are not needed any more. We used them for u_int
types but we now use uint which comes from stdint.h
|
|
This was done with sed on the files.
|
|
Allow to invoke tests by name.
|
|
We can handle NVRAM settings via names but there is no way
to discover these names. This commits adds the unusual -H
option to show these values.
|
|
This makes the commented out code an option that might
or might not work reliable.
|
|
libosmogsm is a new library that is distributed in the libosmocore.
Now, openbsc depends on it. This patch gets openbsc with this
change.
This patch also rewrites all include path to the new
osmocom/[gsm|core]
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
|
|
bsc_init.c was a big mess even only for two supported BTS models,
so before adding more BTS types, this needs a cleanup.
All the BTS specific code from bsc_init.c has now moved into
bts_{siemens_bs11,ipaccess_nanobts}.c
This has required that input_event() and nm_state_event() get both
converted to proper libosmocore signals instead of referencing external
symbols.
|
|
The reason for this is quite simple: We want to make sure anyone
running a customized version of OpenBSC to operate a network will
have to release all custom modifiations to the source code.
|
|
Currently the nanoBTS bootstrap code requires a high delay
otherwise we are not bringing the device up properly. Changing
the init code turns out harder than it seems like. So this is
a workaround for that to allow a high speed RSL/OML connection
after the bringup.
The line driver can have a default TS delay. It is set to the
current default for the nanoBTS and the BS11. For the ipaccess
case we will set the delay lower for the RSL connection and
inside the ipaccess-config we can set it low right away to
have fast firmware flashing and such.
|
|
Try to get the company name of our sponsor right...
|
|
|
|
|
|
|
|
... while asking the BTS to perform tests for us. The length of the
ARFCN whitelist is the actual length in bytes, not the number of 16bit
ARFCN numbers.
Also, implement a limit, either by rxlevel or by number of ARFCN
that should end up in the whitelist.
|
|
|
|
* transition through cycles of NWL tests
|
|
Use libosmocore 'rxlev_stat' module to generate an ordered list
of ARFCN's, sorted by RxLev while performing test nr. 64
|
|
Also, we now re-start the network listen test after it has finished,
so if you run a test from ipaccess-find, the test will get re-started
and re-started all the time.
|
|
there are now human-readable names so you can do something like
ipaccess-config -U dhcp-enabled -S static-ip -S static-gw 192.168.100.120
to unset DHCP and to set static IP and gateway attributes.
|
|
However, the 'static IP address' NVRAM flags are not yet set correctly
|
|
This looks so much better than the *cur++ type code.
Also, we now terminate ipaccess-config once the NV flags or Unit ID have
been set, not just for the OML IP address.
|
|
|
|
|
|
Use the TRX throughout the flash process.
|
|
For the multi TRX setup we will need to specify the right trx->nr
to be able to flash the BTS. For the BS11 case we are ignoring the
additional argument.
|
|
Send the IPA Restart to a given BTS/TRX, change the signal callbacks
to carry the trx instead of the BTS so we have an easy access to the
right TRX and change the ipaccess-config to use that TRX. This is
fixing the restart with a multi TRX setup.
Even if we have the msg->trx, use the gsm_bts_trx_by_nr and get
the TRX from the fom header. This is because the OpenBSC and the
BTS numbering might not match for the multi TRX case.
|
|
|
|
|
|
|
|
Currently we are connecting to the BTS and once the OML is established
we are bootstrapping the OML. This does not work for a multi TRX setup
as we will need to use a trx_nr != 0 for it.
Change the code to wait for a message (in this case NM OC_BASEBAND_TRANSC)
to detect the trx_nr used by the BTS and then use that TRX to bootstrap
the network.
I have tested setting the unit id on a single and multi trx system for
the first and second trx.
|
|
|
|
Add a --trx/-t NR option to set the TRX nr to be used when calling
set unit id and NVRAM. This was not tested and might or might not
work.
|
|
The logging/debugging code is generic enough to move it into libosmocore
while keeping OpenBSC specific definitions in openbsc itself.
This commit uses the logging support present in libosmocore-0.1.2,
you will have to update your library to this version.
|
|
Currently one has to put -w in front of -f to really write the
firmware file to disk. Change the config handling to first take
all parameters and then execute on them. This means -f can now
be used with any other parameter.
|
|
Use the start address inside the header entry, the start is relative
to the surrounding SDP record which is located in our base offset, when
writing it out also ignore four bytes of something (crc?).
|
|
The first non working version to dump the content of the sdp
to the terminal..
|
|
|
|
This library is intended to collect all generic/common funcitionality
of all Osmocom.org projects, including OpenBSC but also OsmocomBB
The library currently includes the following modules:
bitvec, comp128, gsm_utils, msgb, select, signal, statistics, talloc, timer,
tlv_parse, linuxlist
msgb allocation error debugging had to be temporarily disabled as it depends on
'debug.c' functionality which at the moment remains in OpenBSC
|