aboutsummaryrefslogtreecommitdiffstats
path: root/openbsc/src/ipaccess/ipaccess-config.c
AgeCommit message (Collapse)AuthorFilesLines
2015-11-20Fix TSC/BSIC handling bug and remove bts->tscHarald Welte1-1/+1
This fixes a bug in the following circumstances: * BSIC is set to 0 in the config file * No TSC is explicitly specified at the BST level in the config file In this case, we ended up using BSIC=0 and TSC=7, as TSC=7 is our default initialization value. The TSC of the CCCH/BCCH must always be the BCC, which is the lower 3 bits of the BSIC. Having configuration options for both the BSIC _and_ the TSC at the BTS level therefore makes no sense, as it only adds ways in which users can configure non-oprational configurations. So we remove the bts->tsc member, and keep only the ts->tsc members that allow us to configure a timeslot-specific TSC that's different from the BTS TSC (= BCC).
2013-11-11ipa: Explain that one needs to get the IP address of the BTS as argumentHolger Hans Peter Freyther1-1/+1
2013-07-14ipaccess: Fix a resource leak in case the stat is failingHolger Hans Peter Freyther1-0/+1
Close the file when the stat is failing. Fixes: Coverity CID 1040711
2013-07-04ipaccess-config: Add missing break to parsing the -L optionHolger Hans Peter Freyther1-0/+1
Fixes: Coverity CID 1040738
2013-07-04ipaccess-config: Fix a resource leak in an error pathHolger Hans Peter Freyther1-0/+1
Fixes: Coverity CID 1040710, CID 1040711
2013-04-29ipaccess: Remove the ipaccess_gsmnet and assume there is a bsc_gsmnetHolger Hans Peter Freyther1-4/+4
Assume that there is a bsc_gsmnet and modify the ipaccess-config to provide this symbol. If a bsc_gsmmnet is not available when linked the linker will complain and fail. E.g. give an error like this: ../../src/libbsc/libbsc.a(bts_ipaccess_nanobts.o): In function `ipaccess_sign_link_up': src/libbsc/bts_ipaccess_nanobts.c:550: undefined reference to `bsc_gsmnet'
2011-08-19src: port openBSC over libosmo-abis0.9.15Pablo Neira Ayuso1-1/+89
This is a big patch that ports openBSC over libosmo-abis. Sorry, the changes that are included here are all dependent of libosmo-abis, splitting them into smaller pieces would leave the repository in some intermediate state, which is not desired. The main changes are: - The directory libabis/ has been removed as it now lives in libosmo-abis. - new configuration file format for nanoBTS and HSL femto, we need to define the virtual e1_line and attach it to the OML link. - all the existing BTS drivers (nanoBTS, hsl femto, Nokia site, BS11 and rbs2000) now use the new libosmo-abis framework. - use r232 input driver available in libosmo-abis for bs11_config. - use ipa_msg_recv instead of old ipaccess_read_msg function. - delete definition of gsm_e1_subslot and input_signal_data. These structures now lives in libosmo-abis. Most of this patch are deletions of libabis/ which has been moved to libosmo-abis. This patch also modifies openBSC to use all the new definitions available in libosmocore and libosmo-abis. In order to do that, we have replaced the following: - DINP, DMI, DMIB and DMUX by their respective DL* correspondences. - SS_GLOBAL by SS_L_GLOBAL - SS_INPUT by SS_L_INPUT - S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN - SS_INPUT by SS_L_INPUT - S_INP_* by S_L_INP_* sub-signals - E1INP_NODE by L_E1INP_NODE vty node This patch has been tested with: - one nanoBTS - the HSL femto with the examples available under libosmo-abis - BS11 with both dahdi and misdn drivers.
2011-06-05split gsm_data.c in gsm_data_shared.c and gsm_data.cHarald Welte1-2/+2
This facilitates the use of gsm_data.c from osmo-bts
2011-05-12misc: Use the osmo_init code for signals and loggingHolger Hans Peter Freyther1-9/+5
Use the libosmocore code to ignore certain signals by default (e.g. SIGHUP, SIGPIPE) and use the new code to create a default stderr logging target and initialize it properly.
2011-05-07src: use namespace prefix osmo_* for misc utilsPablo Neira Ayuso1-1/+1
Summary of changes: s/bcd2char/osmo_bcd2char/g s/char2bcd/osmo_char2bcd/g s/hexparse/osmo_hexparse/g s/hexdump/osmo_hexdump/g s/hexdump_nospc/osmo_hexdump_nospc/g s/ubit_dump/osmo_ubit_dump/g s/static_assert/osmo_static_assert/g
2011-05-06src: use namespace prefix osmo_signal*Pablo Neira Ayuso1-2/+2
Summary of changes: s/signal_cbfn/osmo_signal_cbfn/g s/register_signal_handler/osmo_signal_register_handler/g s/unregister_signal_handler/osmo_signal_unregister_handler/g s/dispatch_signal/osmo_signal_dispatch/g
2011-05-06src: use namespace prefix osmo_fd* and osmo_select*Pablo Neira Ayuso1-1/+1
Summary of changes: s/struct bsc_fd/struct osmo_fd/g s/bsc_register_fd/osmo_fd_register/g s/bsc_unregister_fd/osmo_fd_unregister/g s/bsc_select_main/osmo_select_main/g
2011-04-18misc: Remove sys/types.h includes from the filesHolger Hans Peter Freyther1-1/+0
These are not needed any more. We used them for u_int types but we now use uint which comes from stdint.h
2011-04-18misc: Move from u_int to uint types of stdint.hHolger Hans Peter Freyther1-12/+12
This was done with sed on the files.
2011-04-11ipaccess-config: Allow to invoke tests by names.Holger Hans Peter Freyther1-1/+45
Allow to invoke tests by name.
2011-04-11ipaccess-config: Add option to list possible NVRAM settingsHolger Hans Peter Freyther1-1/+24
We can handle NVRAM settings via names but there is no way to discover these names. This commits adds the unusual -H option to show these values.
2011-04-11ipaccess-config: Allow to automatically loop a testHolger Hans Peter Freyther1-9/+15
This makes the commented out code an option that might or might not work reliable.
2011-03-23src: use new library libosmogsm and new path to headers in libosmocorePablo Neira Ayuso1-3/+3
libosmogsm is a new library that is distributed in the libosmocore. Now, openbsc depends on it. This patch gets openbsc with this change. This patch also rewrites all include path to the new osmocom/[gsm|core] Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
2011-02-11[BSC] Move the BTS-type specific code from bcs_init.c to bts_*.cHarald Welte1-27/+15
bsc_init.c was a big mess even only for two supported BTS models, so before adding more BTS types, this needs a cleanup. All the BTS specific code from bsc_init.c has now moved into bts_{siemens_bs11,ipaccess_nanobts}.c This has required that input_event() and nm_state_event() get both converted to proper libosmocore signals instead of referencing external symbols.
2011-01-01License change: We are now AGPLv3+ instead of GPLv2+Harald Welte1-6/+5
The reason for this is quite simple: We want to make sure anyone running a customized version of OpenBSC to operate a network will have to release all custom modifiations to the source code.
2010-12-21ts Make the e1inp_ts delay configurableHolger Hans Peter Freyther1-0/+2
Currently the nanoBTS bootstrap code requires a high delay otherwise we are not bringing the device up properly. Changing the init code turns out harder than it seems like. So this is a workaround for that to allow a high speed RSL/OML connection after the bringup. The line driver can have a default TS delay. It is set to the current default for the nanoBTS and the BS11. For the ipaccess case we will set the delay lower for the RSL connection and inside the ipaccess-config we can set it low right away to have fast firmware flashing and such.
2010-10-06misc: Once again go from "On Waves" to "On-Waves"..Holger Hans Peter Freyther1-1/+1
Try to get the company name of our sponsor right...
2010-07-30ipaccess-config: Don't dump the Rxlevel statisticsHarald Welte1-2/+2
2010-07-30ipaccess-config: Terminate program after running BCCH INFO testHarald Welte1-1/+5
2010-07-30ipaccess-config: Add option to disable color in log outputHarald Welte1-1/+5
2010-07-22[ipaccess-config] fix bugs in generating the PHYSICAL CONFIG attributeHarald Welte1-3/+3
... while asking the BTS to perform tests for us. The length of the ARFCN whitelist is the actual length in bytes, not the number of 16bit ARFCN numbers. Also, implement a limit, either by rxlevel or by number of ARFCN that should end up in the whitelist.
2010-07-22[ipaccess-config] make sure the ARFCN Whitelist EIE is built correctlyHarald Welte1-2/+2
2010-07-22ipaccess-config/network-listen updateHarald Welte1-7/+49
* transition through cycles of NWL tests
2010-07-22ipaccess-config / network listen: ordered list of RxLevelsHarald Welte1-2/+9
Use libosmocore 'rxlev_stat' module to generate an ordered list of ARFCN's, sorted by RxLev while performing test nr. 64
2010-07-22move ip.access netowrk listen (NWL) to network_listen.cHarald Welte1-80/+16
Also, we now re-start the network listen test after it has finished, so if you run a test from ipaccess-find, the test will get re-started and re-started all the time.
2010-06-28[ipaccess-config] Better way to set/unset NVRAM attributesHarald Welte1-3/+57
there are now human-readable names so you can do something like ipaccess-config -U dhcp-enabled -S static-ip -S static-gw 192.168.100.120 to unset DHCP and to set static IP and gateway attributes.
2010-06-28[ipaccess-config] Enable setting of static IP address / netmask / gatewayHarald Welte1-43/+126
However, the 'static IP address' NVRAM flags are not yet set correctly
2010-06-28[ipaccess-config] use msgb to make use of various tlv put functionsHarald Welte1-29/+30
This looks so much better than the *cur++ type code. Also, we now terminate ipaccess-config once the NV flags or Unit ID have been set, not just for the OML IP address.
2010-05-31ipaccess-config: More verbose help messageHarald Welte1-9/+9
2010-05-14ipaccess-config: Silence compiler warning.Holger Hans Peter Freyther1-0/+2
2010-05-13ipaccess: Make sure flashing of the secondary BTS is workingHolger Hans Peter Freyther1-5/+5
Use the TRX throughout the flash process.
2010-05-13sw_load: Specify the trx_nr for the software loadHolger Hans Peter Freyther1-1/+1
For the multi TRX setup we will need to specify the right trx->nr to be able to flash the BTS. For the BS11 case we are ignoring the additional argument.
2010-05-13ipaccess: Send the reset to the BASEBAND_TRANSC and supply TRXHolger Hans Peter Freyther1-8/+7
Send the IPA Restart to a given BTS/TRX, change the signal callbacks to carry the trx instead of the BTS so we have an easy access to the right TRX and change the ipaccess-config to use that TRX. This is fixing the restart with a multi TRX setup. Even if we have the msg->trx, use the gsm_bts_trx_by_nr and get the TRX from the fom header. This is because the OpenBSC and the BTS numbering might not match for the multi TRX case.
2010-05-13ipaccess: Refactor... unite some codeHolger Hans Peter Freyther1-11/+11
2010-05-13ipaccess: Use the right trx when performing the testHolger Hans Peter Freyther1-1/+1
2010-05-13ipaccess: Use the current TRX to set the OML address.Holger Hans Peter Freyther1-1/+1
2010-05-13ipaccess: Wait for the BASEBAND_TRANSCEIVER and then bootstrap OMLHolger Hans Peter Freyther1-17/+16
Currently we are connecting to the BTS and once the OML is established we are bootstrapping the OML. This does not work for a multi TRX setup as we will need to use a trx_nr != 0 for it. Change the code to wait for a message (in this case NM OC_BASEBAND_TRANSC) to detect the trx_nr used by the BTS and then use that TRX to bootstrap the network. I have tested setting the unit id on a single and multi trx system for the first and second trx.
2010-05-13abis: Pass the abis_om_obj_inst in the nm_state_event..Holger Hans Peter Freyther1-1/+2
2010-05-12[ipaccess] Attempt to fix setting unit ids with a multi trx setupHolger Hans Peter Freyther1-3/+12
Add a --trx/-t NR option to set the TRX nr to be used when calling set unit id and NVRAM. This was not tested and might or might not work.
2010-03-26move log/debug codebase to libosmocoreHarald Welte1-8/+8
The logging/debugging code is generic enough to move it into libosmocore while keeping OpenBSC specific definitions in openbsc itself. This commit uses the logging support present in libosmocore-0.1.2, you will have to update your library to this version.
2010-03-24ipa: Make it possible to specify -w and -f in any orderHolger Hans Peter Freyther1-3/+9
Currently one has to put -w in front of -f to really write the firmware file to disk. Change the config handling to first take all parameters and then execute on them. This means -f can now be used with any other parameter.
2010-03-22ipa-firmware: Fix the write out of the firmware partsHolger Hans Peter Freyther1-1/+1
Use the start address inside the header entry, the start is relative to the surrounding SDP record which is located in our base offset, when writing it out also ignore four bytes of something (crc?).
2010-03-22ipa-firmware: Write the firmware parts to a fileHolger Hans Peter Freyther1-5/+59
The first non working version to dump the content of the sdp to the terminal..
2010-03-22ipa-firmware: Warn/Exit when the required ids can not be found.Holger Hans Peter Freyther1-5/+13
2010-02-20split 'libosmocore' from openbsc codebaseHarald Welte1-3/+4
This library is intended to collect all generic/common funcitionality of all Osmocom.org projects, including OpenBSC but also OsmocomBB The library currently includes the following modules: bitvec, comp128, gsm_utils, msgb, select, signal, statistics, talloc, timer, tlv_parse, linuxlist msgb allocation error debugging had to be temporarily disabled as it depends on 'debug.c' functionality which at the moment remains in OpenBSC
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-22 13:22:25 +0000