Age | Commit message (Collapse) | Author | Files | Lines |
|
I saw the old copy of the "Appendix J" code too late and I have
discovered some quirks and I am more familar with my implementation.
Most noticable 'w' only needs to be as big as the input arfcn but
requires the 'w' to be initialized. The power_of_2 implementation
differs as well (mine matches the output of wirehsark).
The f0 could be chosen in a better way but right now picking
the lower bound is the easiest. It is not clear if to use
modulo if the range is chosen in the middle. This can be improved
in the future. Right now I have no bit fiddling for range128, 256
and 1024 as I was running out of time.
|
|
This also removes the dependency to osmo_sock() inside libcommon and
replaces it with osmo_sock_* from libosmocore
|
|
|
|
In order to have the MNCC application reliably decide on the codec type,
it needs to know if we are running on a TCH/F or TCH/H. Thus, we pass
lchan_mode as a new parameter to the 'struct gsm_mncc'
|
|
|
|
|
|
This is a big patch that ports openBSC over libosmo-abis.
Sorry, the changes that are included here are all dependent
of libosmo-abis, splitting them into smaller pieces would
leave the repository in some intermediate state, which is
not desired.
The main changes are:
- The directory libabis/ has been removed as it now lives in
libosmo-abis.
- new configuration file format for nanoBTS and HSL femto, we
need to define the virtual e1_line and attach it to the OML
link.
- all the existing BTS drivers (nanoBTS, hsl femto, Nokia site,
BS11 and rbs2000) now use the new libosmo-abis framework.
- use r232 input driver available in libosmo-abis for bs11_config.
- use ipa_msg_recv instead of old ipaccess_read_msg function.
- delete definition of gsm_e1_subslot and input_signal_data.
These structures now lives in libosmo-abis.
Most of this patch are deletions of libabis/ which has been
moved to libosmo-abis.
This patch also modifies openBSC to use all the new definitions
available in libosmocore and libosmo-abis. In order to do that,
we have replaced the following:
- DINP, DMI, DMIB and DMUX by their respective DL* correspondences.
- SS_GLOBAL by SS_L_GLOBAL
- SS_INPUT by SS_L_INPUT
- S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN
- SS_INPUT by SS_L_INPUT
- S_INP_* by S_L_INP_* sub-signals
- E1INP_NODE by L_E1INP_NODE vty node
This patch has been tested with:
- one nanoBTS
- the HSL femto with the examples available under libosmo-abis
- BS11 with both dahdi and misdn drivers.
|
|
gsm_data.h is the part that contains BSC-specific data, whereas
gsm_data_shared.h is now shareda with osmo-bts
|
|
The daemons set up nanoBTS and HSL femto sockets by default, ie. the
three sockets to support these two drivers are open even if we have
no BTS of that kind.
This patch enables on-demand socket creation, ie. we only enable them
if we have one BTS at least that requires it.
I added two new attributes to the gsm_bts object, they are:
* the start() function includes the code that we need to run to start
the BTS. This new function contains the socket creation in the
particular case of nanoBTS and HSL femto.
* the started boolean, which is used to know if we have already
started the BTS, ie. we have already invoked start().
Note that, I have splitted the bts_model_*_init() function into two
functions, the _init() functions that register the BTS driver
and the _start() functions that start BTS driver on-demand.
While I was at it, I added several changes/cleanups to this patch:
* Group all bts_model_*_init() calls into one function bts_init(),
which is called in the initialization path of osmo-nitb and
osmo-bsc.
* Add openbsc/bss.h that contains the declaration of
bsc_bootstrap_network, bsc_shutdown_net and bts_init.
* Add missing e1inp_init() in osmo-bsc.
* Fix missing declaration of hsl_setup in openbsc/e1_input.h
|
|
|
|
The SMSqueue will be responsible of sending to the user. It will
do so in a loop and will also try not to overload the BTS. This
means the throughput of SMS will be limited.
|
|
The grace code will decide if a given connection is allowed to
be made or if it is going to be rejected. For active connections
it is going to send a USSD message.
|
|
|
|
common_vty.c was including bsc_nat.h which tried to
get the sccp/sccp_types.h which is not required to be
installed. Move all structs using/embedding SCCP structures
into the bsc_nat_sccp.h and include. This should fix
the compilation.
|
|
Also, we now re-start the network listen test after it has finished,
so if you run a test from ipaccess-find, the test will get re-started
and re-started all the time.
|
|
|
|
This adds the unix domain socket rf control protocol into
the new subdirectory.
|
|
|
|
|
|
Doh !
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
|
|
|
|
|
|
|
|
|
|
Currently vty_interface.c is used for the BSC config, in case of
the MGCP Gateway or the BSC Nat process these logging commands are
not available. Move the commands to a new vty_interface_cmds.c file
to allow to share basic commands across different programs.
|
|
The 08.08 API will interface with the internal BSC code and it is
the boundary between MSC and BSC. So nothing that calls the BSC
functionality should know about lchan or such.
|
|
Conflicts:
openbsc/include/openbsc/Makefile.am
openbsc/src/Makefile.am
|
|
In separation of using the MGCP parsing in another context, refactor
the code to operate on a struct mgcp_config, split out the vty code
from the mgcp_protocol.c, and move the callbacks into the mgcp code.
There should be no functional changes.
|
|
* use pkg-config from openbsc to find header and library
* move sms and timer tests to libosmocore itself
* ensure "make distcheck" works on both packages
|
|
|
|
The msgb class is using the debug framework and needs to be able
to output data. We would need a way to add custom areas or to have
the struct of areas outside of the default debug.c... but this can
happen at a later point.
|
|
|
|
This has the advantage that counters can be added all over the code
very easily, while having only one routine that stores all of the
current counter values to the database. The counters are synced
every 60 seconds, providing relatively fine grained statistics
about the network usage as time passes by.
|
|
|
|
|
|
Mention the two new header files, do not list isdnsync twice
|
|
|
|
Add some missing header files
|
|
A caller can call rll_establish(lchan, link_id) and a callback to the GSM RLL
code. He will get called back if the RLL link is established or receives some
error message, or the establishment times out.
We need this for proper SMS implementation, where we need to restablish a SAPI3
RLL link before transmitting the actual CP-DATA messages.
|
|
Up until now, we only supported direct RTP streams between ip.access BTS.
With this commit, the user can specify '-P' to the command line to enable
a RTP/RTCP proxy inside OpenBSC. The nanoBTS will then send all their voice
data to OpenBSC, which will relay it to the respective destination BTS (which
can be the same BTS).
The default behaviour remains unchanged. Without '-P' on the command line,
RTP/RTCP is exchanged directly.
|
|
|