Merge history from osmo-gsm-manuals.git

Change-Id: I298828d47ce86c13301f5ab245934fbcf8d8d2d3

13 files changed, 6034 insertions, 0 deletions

diff --git a/doc/manuals/Makefile b/doc/manuals/Makefile
new file mode 100644
index 000000000..0cd260d0e
--- /dev/null
+++ b/doc/manuals/Makefile
@@ -0,0 +1,10 @@
+TOPDIR = ..
+
+ASCIIDOC = osmonitb-usermanual.adoc
+ASCIIDOC_DEPS = chapters/*.adoc
+include $(TOPDIR)/build/Makefile.asciidoc.inc
+
+VTY_REFERENCE = osmonitb-vty-reference.xml
+include $(TOPDIR)/build/Makefile.vty-reference.inc
+
+include $(TOPDIR)/build/Makefile.common.inc
diff --git a/doc/manuals/chapters/bts-examples.adoc b/doc/manuals/chapters/bts-examples.adoc
new file mode 100644
index 000000000..b15fb9921
--- /dev/null
+++ b/doc/manuals/chapters/bts-examples.adoc
@@ -0,0 +1,281 @@
+[[bts-examples]]
+== OsmoNITB example configuration files
+
+The `openbsc/doc/examples/osmo-nitb` directory in the OpenBSC source
+tree contains a collection of example configuration files, sorted by BTS
+type.
+
+This chapter is illustrating some excerpts from those examples
+
+[[bts_example_bs11]]
+=== Example configuration for OsmoNITB with one dual-TRX BS-11
+
+.OsmoNITB with BS11, 2 TRX, no frequency hopping
+====
+
+----
+e1_input
+ e1_line 0 driver misdn
+network
+ network country code 1
+ mobile network code 1
+ short name OpenBSC
+ long name OpenBSC
+ timer t3101 10
+ timer t3113 60
+ bts 0
+  type bs11 <1>
+  band GSM900
+  cell_identity 1
+  location_area_code 1
+  training_sequence_code 7
+  base_station_id_code 63
+  oml e1 line 0 timeslot 1 sub-slot full <2>
+  oml e1 tei 25 <3>
+  trx 0
+   arfcn 121
+   max_power_red 0
+   rsl e1 line 0 timeslot 1 sub-slot full <4>
+   rsl e1 tei 1 <5>
+    timeslot 0
+     phys_chan_config CCCH+SDCCH4
+     e1 line 0 timeslot 1 sub-slot full
+    timeslot 1
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 2 sub-slot 1 <6>
+    timeslot 2
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 2 sub-slot 2
+    timeslot 3
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 2 sub-slot 3
+    timeslot 4
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 3 sub-slot 0
+    timeslot 5
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 3 sub-slot 1
+    timeslot 6
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 3 sub-slot 2
+    timeslot 7
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 3 sub-slot 3
+  trx 1
+   arfcn 123
+   max_power_red 0
+   rsl e1 line 0 timeslot 1 sub-slot full <4>
+   rsl e1 tei 2 <5>
+    timeslot 0
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 4 sub-slot 0 <6>
+    timeslot 1
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 4 sub-slot 1
+    timeslot 2
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 4 sub-slot 2
+    timeslot 3
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 4 sub-slot 3
+    timeslot 4
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 5 sub-slot 0
+    timeslot 5
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 5 sub-slot 1
+    timeslot 6
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 5 sub-slot 2
+    timeslot 7
+     phys_chan_config TCH/F
+     e1 line 0 timeslot 5 sub-slot 3
+----
+====
+
+<1> The BTS type must be set to __bs11__
+<2> The OML E1 timeslot needs to be identical with what was on the BTS side using LMT.
+<3> The OML TEI value needs to be identical with what was configured on the BTS side using LMT.
+<4> The RSL E1 timeslot can be identical for all TRX.
+<5> The RSL TEI values __must__ be different if multiple TRX share one E1 signalling timeslot.
+<6> The TCH all need to be allocated one 16k sub-slot on the E1
+
+[[bts_example_nbts]]
+=== Example configuration for OsmoNITB with one single-TRX nanoBTS
+
+.OsmoNITB with one single-TRX nanoBTS
+====
+
+----
+e1_input
+ e1_line 0 driver ipa <1>
+network
+ network country code 1
+ mobile network code 1
+ short name OpenBSC
+ long name OpenBSC
+ auth policy closed
+ location updating reject cause 13
+ encryption a5 0
+ neci 1
+ rrlp mode none
+ mm info 1
+ handover 0
+ bts 0
+  type nanobts <2>
+  band DCS1800 <3>
+  cell_identity 0
+  location_area_code 1
+  training_sequence_code 7
+  base_station_id_code 63
+  ms max power 15
+  cell reselection hysteresis 4
+  rxlev access min 0
+  channel allocator ascending
+  rach tx integer 9
+  rach max transmission 7
+  ip.access unit_id 1801 0 <4>
+  oml ip.access stream_id 255 line 0
+  gprs mode none
+  trx 0
+   rf_locked 0
+   arfcn 871 <5>
+   nominal power 23
+   max_power_red 20 <6>
+   rsl e1 tei 0
+    timeslot 0
+     phys_chan_config CCCH+SDCCH4
+    timeslot 1
+     phys_chan_config SDCCH8
+    timeslot 2
+     phys_chan_config TCH/F
+    timeslot 3
+     phys_chan_config TCH/F
+    timeslot 4
+     phys_chan_config TCH/F
+    timeslot 5
+     phys_chan_config TCH/F
+    timeslot 6
+     phys_chan_config TCH/F
+    timeslot 7
+     phys_chan_config TCH/F
+----
+====
+
+<1> You have to configure one virtual E1 line with the
+    IPA driver in order to use Abis/IP.  One e1_line is
+    sufficient for any number of A-bis/IP BTSs, there is no
+    limit like in physical E1 lines.
+<2> The BTS type must be set using `type nanobts`
+<3> The GSM band must be set according to the BTS hardware.
+<4> The IPA Unit ID parameter must be set to what has been configured on
+    the BTS side using the __BTS Manager__ or `ipaccess-config`.
+<5> The ARFCN of the BTS.
+<6> All known nanoBTS units have a nominal transmit power of 23 dBm.  If
+    a `max_power_red` of 20 (dB) is configured, the resulting output
+    power at the BTS Tx port is 23 - 20 = 3 dBm.
+
+[NOTE]
+====
+The `nominal_power` setting does __not__ influence the transmitted power
+to the BTS!  It is a setting by which the system administrator tells the
+BSC about the nominal output power of the BTS.  The BSC uses this as
+basis for calculations.
+====
+
+
+[[bts_example_nbts_multi]]
+=== Example configuration for OsmoNITB with multi-TRX nanoBTS
+
+.OsmoNITB configured for dual-TRX (stacked) nanoBTS
+====
+
+----
+e1_input
+ e1_line 0 driver ipa
+network
+ network country code 1
+ mobile network code 1
+ short name OpenBSC
+ long name OpenBSC
+ auth policy closed
+ location updating reject cause 13
+ encryption a5 0
+ neci 1
+ rrlp mode none
+ mm info 0
+ handover 0
+ bts 0
+  type nanobts
+  band DCS1800
+  cell_identity 0
+  location_area_code 1
+  training_sequence_code 7
+  base_station_id_code 63
+  ms max power 15
+  cell reselection hysteresis 4
+  rxlev access min 0
+  channel allocator ascending
+  rach tx integer 9
+  rach max transmission 7
+  ip.access unit_id 1800 0 <1>
+  oml ip.access stream_id 255 line 0
+  gprs mode none
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   max_power_red 0
+   rsl e1 tei 0
+    timeslot 0
+     phys_chan_config CCCH+SDCCH4
+    timeslot 1
+     phys_chan_config SDCCH8
+    timeslot 2
+     phys_chan_config TCH/F
+    timeslot 3
+     phys_chan_config TCH/F
+    timeslot 4
+     phys_chan_config TCH/F
+    timeslot 5
+     phys_chan_config TCH/F
+    timeslot 6
+     phys_chan_config TCH/F
+    timeslot 7
+     phys_chan_config TCH/F
+  trx 1
+   rf_locked 0
+   arfcn 873
+   nominal power 23
+   max_power_red 0
+   rsl e1 tei 0
+    timeslot 0
+     phys_chan_config SDCCH8
+    timeslot 1
+     phys_chan_config TCH/F
+    timeslot 2
+     phys_chan_config TCH/F
+    timeslot 3
+     phys_chan_config TCH/F
+    timeslot 4
+     phys_chan_config TCH/F
+    timeslot 5
+     phys_chan_config TCH/F
+    timeslot 6
+     phys_chan_config TCH/F
+    timeslot 7
+     phys_chan_config TCH/F
+----
+====
+
+<1> In this example, the IPA Unit ID is specified as `1800 0`. Thus, the
+    first nanoBTS unit (`trx 0`) needs to be configured to 1800/0/0 and
+    the second nanoBTS unit (`trx 1`) needs to be configured to 1800/0/1.
+    You can configure the BTS unit IDs using the `ipaccess-config`
+    utility included in OpenBSC.
+
+[NOTE]
+====
+For building a multi-TRX setup, you also need to connect the TIB cables
+between the two nanoBTS units, as well as the coaxial/RF AUX cabling.
+====
diff --git a/doc/manuals/chapters/control.adoc b/doc/manuals/chapters/control.adoc
new file mode 100644
index 000000000..db12bbb68
--- /dev/null
+++ b/doc/manuals/chapters/control.adoc
@@ -0,0 +1,57 @@
+[[control]]
+== Control interface
+
+The actual protocol is described in <<common-control-if>>, the variables
+common to all programs using it are described in <<ctrl_common_vars>>. The
+variables shared with OsmoBSC are described in corresponding section of
+OsmoBSC documentation.Here we describe variables specific to OsmoNITB.
+
+.Variables available over control interface
+[options="header",width="100%",cols="20%,5%,5%,50%,20%"]
+|===
+|Name|Access|Trap|Value|Comment
+|subscriber-modify-v1|WO|No|"<imsi>,<msisdn>,<alg>,<ki>"|See <<sub1>> for details.
+|subscriber-delete-v1|WO|No|"<imsi>"|See <<subdel>> for details.
+|subscriber-list-active-v1|RO|No||Return list of active subscribers.
+|===
+
+[[sub1]]
+=== subscriber-modify-v1
+
+Modify (or add if missing) subscriber entry with the give IMSI, MSISDN, Ki and
+algorithm (valid values are "none", "xor" and "comp128v1"). The subscriber is
+automatically marked as authorized.
+
+[[subdel]]
+=== subscriber-delete-v1
+
+Delete the subscriber with the given IMSI. Returns "Removed active subscriber"
+or "Removed" depending on the subscriber's use status.
+
+[[osmo-bsc_nat]]
+
+The following variables are only available over control interface of
+osmo-bsc_nat program.
+
+.Variables available over control interface of osmo-bsc_nat
+[options="header",width="100%",cols="20%,5%,5%,50%,20%"]
+|===
+|Name|Access|Trap|Value|Comment
+|net.0.bsc.N.*|RW|Yes|Arbitrary variable|Forward given command to BSC N control interface.
+|net.0.bsc_cfg.N.access-list-name|RW|No|"<name>"|Set/Get ACL for a given BSC N.
+|net.0.bsc_cfg.N.no-access-list-name|WO|No|Ignored|Remove ACL for a given BSC N.
+|net.0.add.allow.access-list.A|WO|No|"<regexp>"|See <<nacl>> for details.
+|net.0.save-configuration|WO|No|Ignored|Save current running config into file.
+|net.0.bsc.N.notification-rejection-v1|NA|Yes|"imsi=<imis>"|See <<narej>> for details.
+|===
+
+[[nacl]]
+=== allow.access-list
+
+Add given regular expression for matching IMSI(s) to allowed access list A.
+
+[[narej]]
+=== notification-rejection-v1
+
+This TRAP event notifies all connected clients about IMSI which was rejected by
+BSC N.
diff --git a/doc/manuals/chapters/hlr.adoc b/doc/manuals/chapters/hlr.adoc
new file mode 100644
index 000000000..8f2840a6e
--- /dev/null
+++ b/doc/manuals/chapters/hlr.adoc
@@ -0,0 +1,331 @@
+[[hlr]]
+== OsmoNITB HLR subsystem
+
+
+As OsmoNITB is a fully autonomous system, it also includes a
+minimal/simplistic HLR and AUC.  Compared to real GSM networks, it does
+not implement any of the external interfaces of a real HLR, such as the
+MAP/TCAP/SCCP protocol.  It can only be used inside the OsmoNITB.
+
+While functionally maintaining the subscriber database and
+authentication keys, it offers a much reduced feature set.  For example,
+it is not possible to configure bearer service permission lists, or
+BAOC.
+
+At this time, the only supported database back end for the OsmoNITB
+internal HLR/AUC is the file-based SQL database SQLite3.
+
+=== Authorization Policy
+
+Authorization determines how subscribers can access your network.  This
+is unrelated to authentication, which verifies the authenticity of SIM
+cards that register with the network.
+
+OsmoNITB supports three different authorization policies:
+
+closed::
+	This mode requires subscribers to have a record with their IMSI
+	in the HLR, and it requires that their status is set to
+	`authorized 1`
+	+
+	This reflects the most typical operation of GSM networks, where
+	subscribers have to obtain a SIM card issued by the operator.  At the
+	time the SIM gets issued, it is provisioned in the HLR to enable the
+	subscriber to use the services of the network.
+
+accept-all::
+	This policy accepts any and all subscribers that every try to
+	register to the network.  Non-existent subscribers are
+	automatically and dynamically created in the HLR, and they
+	immediately have full access to the network.  Any IMSI can
+	register, no matter what SIM card they are using in their
+	phones.
+	+
+	This mode is mostly useful for lab testing or for demonstrating
+	the lack of mutual authentication and the resulting security
+	problems in the GSM system.
+
+NOTE: As you do not know the Ki of dynamically created subscribers with
+SIM cards of unknown origin, you cannot use cryptographic authentication
+and/or encryption!
+
+CAUTION: Never run a network in accept-all mode, unless you know exactly
+what you are doing.  You are very likely causing service interruption to
+mobile phones in the coverage area of your BTSs, which is punishable
+under criminal law in most countries!
+
+token::
+	This method was created for special-purpose configurations at
+	certain events.  It tries to combine the benefits of automatic
+	enrollment with foreign IMSI while trying to prevent causing disruption
+	to phones that register to the network by accident.
+	+
+	This policy is currently not actively supported.
+
+The currently active policy can be selected using the
+`auth policy (closed|accept-all|token)` at the `network` configuration
+node of the VTY.
+
+=== Location Update Reject Cause
+
+When a 'Location Update Request' is to be rejected by the network (e.g.
+due to an unknown or unauthorized subscriber), the 'Location Update
+Reject' message will contain a 'Reject Cause'.
+
+You can configure the numeric value of that cause by means of the
+`location updating reject cause <2-111>` command at the network node.
+
+
+=== Querying information about a subscriber
+
+Information about a specific subscriber can be obtained from the HLR by
+issuing `show subscriber` command.
+
+For example, to display information about a subscriber with the IMSI
+602022080345046, you can use the following command:
+
+.Displaying information about a subscriber
+----
+OpenBSC> show subscriber imsi 602022080345046
+    ID: 1, Authorized: 1 <1>
+    Name: 'Frank'
+    Extension: 2342 <2>
+    LAC: 1/0x1 <3>
+    IMSI: 602022080345046
+    TMSI: 4DB8B4D8
+    Pending: 0
+    Use count: 1
+----
+
+<1> Whether or not the subscriber is authorized for access
+<2> OsmoNITB is often treated like a PBX, this is why phone numbers are called extensions
+<3> The Location Area Code (LAC) indicates where in the network the
+    subscriber has last performed a LOCATION UPDATE.  Detached subscribers
+    indicate a LAC of 0.
+
+Subscribers don't have to be identified/referenced by their IMSI, but
+they can also be identified by their extension (phone number), their
+TMSI as well as their internal database ID.   Example alternatives
+showing the same subscriber record are:
+----
+OpenBSC> show subscriber id 1
+----
+
+or
+
+----
+OpenBSC> show subscriber extension 2342
+----
+
+
+=== Enrolling a subscriber
+
+A subscriber can be added to the network in different ways:
+
+. authorizing an auto-generated subscriber
+. manually creating a subscriber using VTY commands
+. manually creating subscriber by insert into SQL database by external program
+
+==== Authorizing an auto-generated subscriber
+
+If the `subscriber-create-on-demand` configuration option is set in the `nitb`
+VTY config node, then OsmoNITB will automatically create a subscriber record
+for every IMSI that ever tries to perform a LOCATION UPDATE with the network.
+However, those subscriber records are marked as "not authorized", i.e.  they
+will not be able to use your network.
+
+You can latter on _authorize_ any such a subscriber using the `subscriber IMSI
+...  authorized 1` command at the VTY enable node.
+
+.Example: Authorizing an auto-generated subscriber
+----
+OpenBSC> enable
+OpenBSC# configure terminal
+OpenBSC(config)# nitb
+OpenBSC(config-nitb)# subscriber-create-on-demand <1>
+OpenBSC(config-nitb)# end
+OpenBSC# <2>
+OpenBSC# subscriber imsi 262420123456789 authorized 1 <3>
+----
+<1> We first ensure that `subscriber-create-on-demand` is active
+<2> At this time we ensure that the MS with IMSI 262420123456789 performs a
+    location update to our network, e.g. by powering up the associated phone
+    followed by manual operator selection
+<3> Here we authorize that ISMI
+
+The above method implies that you know the IMSI stored on the SIM card of the
+subscriber that you want to to authorize. Unfortunately there is no easy/standard
+way to obtain the IMSI on most phones.  If the phone has an AT-command
+interface, you may try `AT+CIMI`.  You can also read the IMSI off the SIM using
+a PC-attached smart card reader.
+
+NOTE: Contrary to classic GSM networks and for historic reasons, this behavior
+is the default behavior of OsmoNITB.  For production networks with a closed
+subscriber base, it is strongly recommended to use the `no
+subscriber-create-on-demand` option at the `nitb` VTY config node.
+
+==== Manually creating a subscriber from the VTY
+
+You can manually add a subscriber to the HLR by VTY commands.  To do so, yo
+will need to know at the minimum the IMSI of the subscriber.
+
+.Example: Create a new subscriber for IMSI 262429876543210
+----
+OpenBSC# subscriber create imsi 262429876543210
+    ID: 3, Authorized: 0 <1>
+    Extension: 22150 <2>
+    LAC: 0/0x0 <3>
+    IMSI: 262429876543210
+    Expiration Time: Thu, 01 Jan 1970 01:00:00 +0100
+    Paging: not paging Requests: 0
+    Use count: 1
+OpenBSC# subscriber imsi 262429876543210 authorized 1 <4>
+OpenBSC# subscriber imsi 262429876543210 extension 23234242 <5>
+OpenBSC# subscriber imsi 262429876543210 name Sub Scriber <6>
+OpenBSC# show subscriber imsi 262429876543210 <7>
+    ID: 3, Authorized: 1
+    Name: 'Sub Scriber'
+    Extension: 23234242
+    LAC: 0/0x0
+    IMSI: 262429876543210
+    Expiration Time: Thu, 01 Jan 1970 01:00:00 +0100
+    Paging: not paging Requests: 0
+    Use count: 1
+----
+<1> as you can see, a newly-created subscriber is not automatically authorized.
+    We will change this in the next step.
+<2> the NITB has automatically allocated a random 5-digit extension (MSISDN)
+<3> Location Area Code 0 means that this subscriber is currently not registered on the network
+<4> Authorize the subscriber
+<5> Change the extension (MSISDN) to 23234242 (optional)
+<6> Give the subscriber a human-readable name (optional)
+<7> Review the content of your new subscriber record
+
+NOTE: If you are running a network with A5 encryption enabled, you must also
+configure the secret key (Ki) of the SIM card in the HLR.
+
+You can change further properties on your just-created subscriber as explained
+in <<hlr-subscr-properties>>.
+
+==== Creating subscribers in the SQL database
+
+In most applications, the network operator issues his own SIM cards, and
+the subscriber records corresponding to each SIM will be pre-provisioned by
+direct insertion into the SQL database.  This is performed long before the
+SIM cards are issued towards the actual end-users.
+
+This can be done by a custom program, the SQL schema is visible from the
+`.schema` command on the sqlite3 command-line program, and there are several
+scripts included in the OpenBSC source code, written in both Python as well as
+Perl language.
+
+In case you are obtaining a starter kit with pre-provisioned SIM cards from
+sysmocom: They will ship with a HLR SQL database containing the subscriber
+records.
+
+==== Provisioning SIM cards
+
+In most applications, the operator obtains pre-provisioned SIM cards from a SIM
+card supplier.
+
+If you prefer to provision the SIM cards yourself, you can use the pySim
+tool available from http://cgit.osmocom.org/cgit/pysim/.  It has the
+ability to append the newly-provisioned SIM cards to an existing HLR
+database, please check its `--write-hlr` command line argument.
+
+
+[[hlr-subscr-properties]]
+=== Changing subscriber properties
+
+Once a subscriber exists in the HLR, his properties can be set
+interactively from the VTY.  Modifying subscriber properties requires
+the VTY to be in the privileged (`enable`) mode.
+
+All commands are single-line commands and always start with identifying
+the subscriber on which the operation shall be performed.  Such
+identification can be performed by
+
+* IMSI
+* TMSI
+* extension number
+* ID (internal identifier)
+
+
+==== Changing the subscriber phone number
+
+
+You can set the phone number of the subscriber with IMSI 602022080345046
+to 12345 by issuing the following VTY command from the enable node:
+
+.Changing the phone number of a subscriber
+----
+OpenBSC# subscriber imsi 602022080345046 extension 12345
+----
+
+
+==== Changing the subscriber name
+
+The subscriber name is an internal property of OsmoNITB.  The name will
+never be transmitted over the air interface or used by the GSM protocol.
+The sole purpose of the name is to make log output more intuitive, as
+human readers of log files tend to remember names easier than IMSIs or
+phone numbers.
+
+In order to set the name of subscriber with extension number 12345 to
+"Frank", you can issue the following command on the VTY enable node:
+`subscriber extension 12345 name Frank`
+
+The name may contain spaces and special characters.  You can verify the
+modified subscriber record by issuing the `show subscriber extension
+12345` command.
+
+
+==== Changing the authorization status
+
+As the HLR automatically adds records for all subscribers it sees, those
+that are actually permitted to use the network have to be authorized by
+setting the authorized property of the subscriber. 
+
+You can set the authorized property by issuing the following VTY command
+from the enable node:
+
+.Authorizing a subscriber
+----
+OpenBSC# subscriber extension 12345 authorized 1
+----
+
+Similarly, you can remove the authorized status from
+a subscriber by issuing the following command:
+
+.Un-authorizing a subscriber
+----
+OpenBSC# subscriber extension 12345 authorized 0
+----
+
+
+==== Changing the GSM authentication algorithm and Ki
+
+In order to perform cryptographic authentication of the subscriber, his
+Ki needs to be known to the HLR/AUC.  Furthermore, the authentication
+algorithm implemented on the SIM card (A3/A8) must match that of the
+algorithm configured in the HLR.
+
+Currently, OsmoNITB supports the following authentication algorithms:
+
+none:: No authentication is performed
+xor:: Authentication is performed using the XOR algorithm (for test/debugging purpose)
+comp128v1:: Authentication is performed according to the COMP128v1 algorithm 
+
+WARNING: None of the supported authentication algorithms are
+cryptographically very strong.  Development is proceeding to include
+support for stronger algorithms like GSM-MILENAGE.  Please contact
+sysmocom if you require strong authentication support.
+
+In order to configure a subscriber for COMP128v1 and to set his Ki, you
+can use the following VTY command from the enable node:
+
+.Configuring a subscriber for COMP128v1 and setting Ki
+----
+OpenBSC# subscriber extension 2342 a3a8 comp128v1 000102030405060708090a0b0c0d0e0f
+----
+
diff --git a/doc/manuals/chapters/net.adoc b/doc/manuals/chapters/net.adoc
new file mode 100644
index 000000000..455e1a6ab
--- /dev/null
+++ b/doc/manuals/chapters/net.adoc
@@ -0,0 +1,139 @@
+[[net]]
+== OsmoNITB Core Network Subsystem
+
+The OsmoNITB Core Network is a minimalistic implementation of the
+classic MSC/VLR/HLR/AUC/SMSC components.  None of the standardized core
+network protocols (such as SCCP/TCAP/MAP) are used, interfaces between
+VLR and HLR are simple function calls inside the same software package.
+
+OsmoNITB can thus provide autonomous voice and SMS services to its
+coverage area, but it cannot provide roaming interfaces to classic GSM
+operators.  To support this configuration, it is suggested to use the
+OsmoBSC variant of OpenBSC and interface it with a conventional MSC
+using A-over-IP protocol.
+
+If you have classic GSM network/operator background, many of the
+concepts used in OsmoNITB will appear foreign to you, as they are very
+unlike the conventional GSM networks that you have worked with.
+
+
+=== Configuring the Core Network
+
+Like everything else, the core network related parameters are configured
+using the VTY.  The respective parameters are underneath the
+`network` config node.
+
+You can get to that node by issuing the following commands:
+
+.Entering the config network node
+----
+OpenBSC> enable 
+OpenBSC# configure terminal 
+OpenBSC(config)# network 
+OpenBSC(config-net)#
+----
+
+A full reference to them can be found in the _OsmoNITB VTY reference
+manual_ <<vty-ref-osmonitb>>. This section will only introduce the most
+commonly used settings in detail.
+
+[TIP]
+====
+You can always use the `list` VTY command to get a list of all possible
+commands at the current node.
+====
+
+
+=== Configuring the MCC/MNC
+
+The key identities of every GSM PLMN is the MCC and MNC.  They are
+identical over the entire network.  In most cases, the MCC/MNC will be
+allocated to the operator by the respective local regulatory authority.
+For example, to set the MCC/MNC of 262-89, you may enter:
+
+.Configuring the MCC/MNC
+----
+OpenBSC(config-net)# network country code 262
+OpenBSC(config-net)# mobile network code 89
+----
+
+
+=== Configuring MM INFO
+
+The __MM INFO__ procedure can be used after a successful __LOCATION
+UPDATE__ in order to transmit the human-readable network name as well as
+local time zone information to the MS.
+
+By default, MM INFO is not active.  You can activate it, and set its
+configuration using the VTY.   An example is provided below.  
+
+.Configuring MM INFO
+----
+OpenBSC(config-net)# mm info 1
+OpenBSC(config-net)# short name OpenBSC
+OpenBSC(config-net)# long name OpenBSC
+----
+
+[NOTE]
+====
+Not all phone support the MM INFO procedure.  Unless they already are
+factory-programmed to contain the name for your MCC/MNC, then they will
+likely only provide a numeric display of the network name, such as
+__262-89__ or with the country code transformed into a letter, such as
+__D 89__.
+====
+
+The time information transmitted is determined by the local system time
+of the operating system on which OsmoNITB is running.  As BTSs attached
+to one OsmoNITB can reside in different time zones, it is possible to
+use the `timezone` command at each BTS node to set different time
+zone offsets in hours and quarter hours.
+
+
+=== Setting the NECI bit
+
+NECI (New Establishment Cause Indication) is an optional change of the
+definition for establishment cause in the RACH burst.  Among other
+things, in a network with NECI, a MS can explicitly indicate its TCH/H
+capability while asking for a dedicated radio channel.
+
+It is strongly recommended to use NECI.  You can do so by issuing the following command:
+.Enabling NECI
+----
+OpenBSC(config-net)# neci 1
+----
+
+
+=== Configuring Handover
+
+As opposed to cell re-selection in idle mode, handover refers to the
+explicit transfer of a MS dedicated channel from one radio channel to
+another.  This typically happens due to a MS moving from one cell to
+another while in an active call.
+
+OsmoNITB has a number of hand-over related parameters by which the
+hand-over algorithm can be tuned. Logically, those settings are settings
+of the BSC component, but for historic reasons, they are also configured
+under the __network__ VTY node.
+
+.Configuring Handover
+----
+OpenBSC(config-net)# handover 1
+OpenBSC(config-net)# handover window rxlev averaging 10
+OpenBSC(config-net)# handover window rxqual averaging 1
+OpenBSC(config-net)# handover window rxlev neighbor averaging 10
+OpenBSC(config-net)# handover power budget interval 6
+OpenBSC(config-net)# handover power budget hysteresis 3
+OpenBSC(config-net)# handover maximum distance 9999
+----
+
+[NOTE]
+====
+If you are receiving the following error message: 
+----
+OpenBSC(config-net)# handover 1
+% Cannot enable handover unless RTP Proxy mode is enabled by using the -P command line option
+----
+then you should do as indicated and make sure to start your `osmo-nitb` process using
+the `-P` command line option.
+====
diff --git a/doc/manuals/chapters/overview.adoc b/doc/manuals/chapters/overview.adoc
new file mode 100644
index 000000000..d161af3f9
--- /dev/null
+++ b/doc/manuals/chapters/overview.adoc
@@ -0,0 +1,196 @@
+[[overview]]
+== Overview
+
+This manual should help you getting started with OsmoNITB. It will cover
+aspects of configuring and running the OsmoNITB.
+
+[[intro_overview]]
+=== About OsmoNITB
+
+OsmoNITB is one particular version of the OpenBSC software suite.
+Unlike classic, distributed, hierarchical GSM networks, OsmoNITB
+implements all parts of a GSM Network (BSC, MSC, VLR, HLR, AUC, SMSC)
+__in the box__, i.e. in one element.
+
+The difference between classic GSM network architecture and the OsmoNITB
+based GSM network architecture is illustrated in <<fig-gsm-classic>> and
+<<fig-gsm-nitb>>.
+
+[[fig-gsm-classic]]
+.Classic GSM network architecture (simplified)
+[graphviz]
+----
+digraph G {
+	rankdir=LR;
+	MS0 [label="MS"]
+	MS1 [label="MS"]
+	MS2 [label="MS"]
+	MS3 [label="MS"]
+	BTS0 [label="BTS"]
+	BTS1 [label="BTS"]
+	MSC [label="MSC/VLR"]
+	HLR [label="HLR/AUC"]
+	MS0->BTS0 [label="Um"]
+	MS1->BTS0 [label="Um"]
+	MS2->BTS1 [label="Um"]
+	MS3->BTS1 [label="Um"]
+	BTS0->BSC [label="Abis"]
+	BTS1->BSC [label="Abis"]
+	BSC->MSC [label="A"]
+	MSC->HLR [label="C"]
+	MSC->EIR [label="F"]
+	MSC->SMSC
+}
+----
+
+[[fig-gsm-nitb]]
+.GSM system architecture using OsmoNITB
+[graphviz]
+----
+digraph G {
+	rankdir=LR;
+	MS0 [label="MS"]
+	MS1 [label="MS"]
+	MS2 [label="MS"]
+	MS3 [label="MS"]
+	BTS0 [label="BTS"]
+	BTS1 [label="BTS"]
+	MS0->BTS0 [label="Um"]
+	MS1->BTS0 [label="Um"]
+	MS2->BTS1 [label="Um"]
+	MS3->BTS1 [label="Um"]
+	BTS0->BSC [label="Abis"]
+	BTS1->BSC [label="Abis"]
+	subgraph cluster_nitb {
+		label = "OsmoNITB";
+		BSC
+		MSC [label="MSC/VLR"]
+		HLR [label="HLR/AUC"]
+		BSC->MSC [label="A"]
+		MSC->HLR [label="C"]
+		MSC->EIR [label="F"]
+		MSC->SMSC;
+	}
+}
+----
+
+
+=== Software Components
+
+OsmoNITB contains a variety of different software components, which
+we'll quickly describe in this section.
+
+==== A-bis Implementation
+
+OsmoNITB implements the ETSI/3GPP specified A-bis interface, including
+_3GPP TS 48.056_ <<3gpp-ts-48-056>> (LAPD), _3GPP TS 48.058_
+<<3gpp-ts-48-058>> (RSL) and 3GPP TS 52.021 <<3gpp-ts-52-021>> (OML). In
+addition, it supports a variety of vendor-specific extensions and
+dialects in order to communicate with BTSs from Siemens, Nokia,
+Ericsson, ip.access and sysmocom.
+
+For more information, see <<bts>> and <<bts-examples>>.
+
+
+==== BSC Implementation
+
+The BSC implementation covers the classic functionality of a GSM Base
+Station Controller, i.e.
+
+* configuring and bringing up BTSs with their TRXs and TSs
+* implementing the A-bis interface / protocols for signalling and actual
+  voice data (TRAU frames).
+* processing measurement results from the mobile stations in dedicated
+  mode, performing hand-over decision and execution.
+* Terminating the _3GPP TS 24.008_ <<3gpp-ts-24-008>> RR (Radio Resource)
+  sub-layer from the MS.
+
+For more information, see <<net>>, <<bts>> and <<bts-examples>>.
+
+
+==== HLR/AUC
+
+A minimalistic implementation of the subscriber database (HLR) and
+subscriber secret key storage (AUC).
+
+For more information, see <<hlr>>.
+
+
+==== SMSC
+
+A minimal store-and-forward server for SMS, supporting both MO and MT
+SMS service, as well as multi-part messages.
+
+The built-in SMSC also supports an external SMSC interface.  For more
+information, see <<smpp>>.
+
+
+==== MSC
+
+The MSC component of OsmoNITB implements the mobility management (MM)
+functions of the TS 04.08, as well as the optional security related
+procedures for cryptographic authentication and encryption.
+
+Furthermore, it can handle TS 04.08 Call Control (CC), either by use of
+an internal MNCC handler, or by use of an external MNCC agent.  For more
+information see <<mncc>>.
+
+
+==== TRAU mapper / E1 sub-channel muxer
+
+Unlike classic GSM networks, OsmoNITB does not perform any transcoding.
+Rather, a compatible codec is selected for both legs of a call, and
+codec frames are passed through transparently.  In order to achieve this
+with E1 based BTS, OsmoNITB contains a E1 sub-channel de- and
+re-multiplexer as well as a TRAU mapper that can map uplink to downlink
+frames and vice versa.
+
+
+==== RTP proxy
+
+BTS models implementing A-bis over IP don't use classic TRAU frames but
+typically transport the voice codec frames as RTP/UDP/IP protocol.
+OsmoNITB can either instruct the BTSs to send those voice streams
+directly to each other (BTS to BTS without any intermediary), or it can
+run an internal RTP proxy for passing frames from one BTS to another.
+
+.RTP flow without RTP proxy mode (default)
+[graphviz]
+----
+digraph G {
+	rankdir=LR;
+
+	MS0 [label="MS A"];
+	MS1 [label="MS B"];
+	BTS0 [label="BTS A"];
+	BTS1 [label="BTS B"];
+	NITB;
+
+	MS0 -> BTS0;
+	MS1 -> BTS1;
+	BTS0 -> NITB [label="Abis OML+RSL",dir=both];
+	BTS1 -> NITB [label="Abis OML+RSL",dir=both];
+	BTS0 -> BTS1 [label="RTP",dir=both]
+}
+----
+
+.RTP flow with RTP proxy mode
+[graphviz]
+----
+digraph G {
+	rankdir=LR;
+
+	MS0 [label="MS A"];
+	MS1 [label="MS B"];
+	BTS0 [label="BTS A"];
+	BTS1 [label="BTS B"];
+	NITB;
+
+	MS0 -> BTS0;
+	MS1 -> BTS1;
+	BTS0 -> NITB [label="Abis OML+RSL",dir=both];
+	BTS1 -> NITB [label="Abis OML+RSL",dir=both];
+	BTS0 -> NITB [label="RTP",dir=both]
+	BTS1 -> NITB [label="RTP",dir=both]
+}
+----
diff --git a/doc/manuals/chapters/running.adoc b/doc/manuals/chapters/running.adoc
new file mode 100644
index 000000000..406c41c19
--- /dev/null
+++ b/doc/manuals/chapters/running.adoc
@@ -0,0 +1,104 @@
+== Running OsmoNITB
+
+The OsmoNITB executable (`osmo-nitb`) offers the following command-line
+arguments:
+
+=== SYNOPSIS
+
+*osmo-nitb* [-h|-V] [-d 'DBGMASK'] [-D] [-c 'CONFIGFILE'] [-s] [-T] [-e 'LOGLEVEL'] [-l 'DATABASE'] [-a] [-P] [-m] [-C] [-r 'RFCTL']
+
+=== OPTIONS
+
+*-h, --help*::
+	Print a short help message about the supported options
+*-V, --version*::
+	Print the compile-time version number of the OsmoBTS program
+*-d, --debug 'DBGMASK','DBGLEVELS'*::
+	Set the log subsystems and levels for logging to stderr. This
+	has mostly been superseded by VTY-based logging configuration,
+	see <<logging>> for further information.
+*-D, --daemonize*::
+	Fork the process as a daemon into background.
+*-c, --config-file 'CONFIGFILE'*::
+	Specify the file and path name of the configuration file to be
+	used. If none is specified, use `openbsc.cfg` in the current
+	working directory.
+*-s, --disable-color*::
+	Disable colors for logging to stderr. This has mostly been
+	deprecated by VTY based logging configuration, see <<logging>>
+	for more information.
+*-T, --timestamp*::
+	Enable time-stamping of log messages to stderr. This has mostly
+	been deprecated by VTY based logging configuration, see
+	<<logging>> for more information.
+*-e, --log-level 'LOGLEVEL'*::
+	Set the global log level for logging to stderr. This has mostly
+	been deprecated by VTY based logging configuration, see
+	<<logging>> for more information.
+*-l, --database 'DATABASE'*::
+	Specify the file name of the SQLite3 database to use as HLR/AUC
+	storage
+*-a, --authorize-everyone*::
+	Authorize every subscriber to the network.  This corresponds to
+	the `auth-policy open` VTY configuration option.
+	+
+	WARNING:: This is dangerous as you may disrupt services to
+	subscribers that are not part of your network!  Don't use unless
+	you absolutely know what you're doing!
+*-P, --rtp-proxy*::
+	Enable the RTP proxy code inside OsmoNITB.  This will force all
+	voice RTP data to pass through OsmoNITB, rather than going
+	directly from BTS to MGW, or BTS to BTS.
+*-M, --mncc-sock-path*::
+	Enable the MNCC socket for an external MNCC handler. See
+	<<mncc>> for further information.
+*-m, --mncc-sock*::
+	Same as option -M (deprecated).
+*-C, --no-dbcounter*::
+	Disable the regular periodic synchronization of statistics
+	counters to the database.
+*-r, --rf-ctl 'RFCTL'*::
+	Offer a Unix domain socket for RF control at the path/filename
+	'RFCTL' in the file system.
+
+
+=== Multiple instances
+
+Running multiple instances of `osmo-nitb` is possible if all interfaces (VTY,
+OML) are separated using the appropriate configuration options. The IP based
+interfaces are binding to local host by default. In order to separate the
+processes, the user has to bind those services to specific but different
+IP addresses.
+
+The VTY and the control interface can be bound to IP addresses from the loopback
+address range.
+
+.Example: Binding VTY and control interface to a specific ip-address
+----
+line vty
+ bind 127.0.0.2
+ctrl
+ bind 127.0.0.2
+----
+
+The OML interface also needs to be separated by binding it to different IP
+addresses. Usually it is not possible to use addresses from the loopback
+address range here since the OML interface needs to be reachable by an external
+BTS. If only one ethernet interface is available, sub-devices with different IP
+addresses can be created.
+
+.Example: Binding OML to a specific IP address
+----
+e1_input
+ ipa bind 10.9.1.101
+----
+
+NOTE: Depending on the application, it is necessary to have different ARFCN,
+MCC, MNC and network name settings. It might also be necessary to point to
+different database and config files using command line options (see option
+-l and -c).
+
+NOTE: If an external MNCC handler is used, the user has to assign a different
+socket path to reach osmo-nitb instance using commandline option -M. If option
+-M is left out, the internal MNCC handler is used and no further configuration
+is required
diff --git a/doc/manuals/osmonitb-usermanual-docinfo.xml b/doc/manuals/osmonitb-usermanual-docinfo.xml
new file mode 100644
index 000000000..87d72da7e
--- /dev/null
+++ b/doc/manuals/osmonitb-usermanual-docinfo.xml
@@ -0,0 +1,66 @@
+<revhistory>
+  <revision>
+    <revnumber>1</revnumber>
+    <date>August 13, 2012</date>
+    <authorinitials>HF</authorinitials>
+    <revremark>
+      Initial version.
+    </revremark>
+  </revision>
+  <revision>
+    <revnumber>2</revnumber>
+    <date>February 2016</date>
+    <authorinitials>HW</authorinitials>
+    <revremark>
+      Conversion to asciidoc, removal of sysmoBTS specific parts.
+    </revremark>
+  </revision>
+</revhistory>
+
+<authorgroup>
+  <author>
+    <firstname>Holger</firstname>
+    <surname>Freyther</surname>
+    <email>hfreyther@sysmocom.de</email>
+    <authorinitials>HF</authorinitials>
+    <affiliation>
+      <shortaffil>sysmocom</shortaffil>
+      <orgname>sysmocom - s.f.m.c. GmbH</orgname>
+      <jobtitle>former Managing Director</jobtitle>
+    </affiliation>
+  </author>
+  <author>
+    <firstname>Harald</firstname>
+    <surname>Welte</surname>
+    <email>hwelte@sysmocom.de</email>
+    <authorinitials>HW</authorinitials>
+    <affiliation>
+      <shortaffil>sysmocom</shortaffil>
+      <orgname>sysmocom - s.f.m.c. GmbH</orgname>
+      <jobtitle>Managing Director</jobtitle>
+    </affiliation>
+  </author>
+</authorgroup>
+
+<copyright>
+  <year>2012-2016</year>
+  <holder>sysmocom - s.f.m.c. GmbH</holder>
+</copyright>
+
+<legalnotice>
+  <para>
+	Permission is granted to copy, distribute and/or modify this
+	document under the terms of the GNU Free Documentation License,
+	Version 1.3 or any later version published by the Free Software
+	Foundation; with the Invariant Sections being just 'Foreword',
+	'Acknowledgements' and 'Preface', with no Front-Cover Texts,
+	and no Back-Cover Texts.  A copy of the license is included in
+	the section entitled "GNU Free Documentation License".
+  </para>
+  <para>
+	The Asciidoc source code of this manual can be found at
+	<ulink url="http://git.osmocom.org/osmo-gsm-manuals/">
+		http://git.osmocom.org/osmo-gsm-manuals/
+	</ulink>
+  </para>
+</legalnotice>
diff --git a/doc/manuals/osmonitb-usermanual.adoc b/doc/manuals/osmonitb-usermanual.adoc
new file mode 100644
index 000000000..63d430a54
--- /dev/null
+++ b/doc/manuals/osmonitb-usermanual.adoc
@@ -0,0 +1,48 @@
+:gfdl-enabled:
+:program-name: OsmoNITB
+
+OsmoNITB User Manual
+====================
+Harald Welte <hwelte@sysmocom.de>
+
+
+include::../common/chapters/preface.adoc[]
+
+include::chapters/overview.adoc[]
+
+include::chapters/running.adoc[]
+
+include::chapters/control.adoc[]
+
+include::../common/chapters/vty.adoc[]
+
+include::../common/chapters/logging.adoc[]
+
+include::chapters/net.adoc[]
+
+include::../common/chapters/bsc.adoc[]
+
+include::../common/chapters/bts.adoc[]
+
+include::chapters/bts-examples.adoc[]
+
+include::chapters/hlr.adoc[]
+
+include::../common/chapters/smpp.adoc[]
+
+include::../common/chapters/mncc.adoc[]
+
+include::../common/chapters/control_if.adoc[]
+
+include::../common/chapters/cell-broadcast.adoc[]
+
+include::../common/chapters/abis.adoc[]
+
+include::../common/chapters/port_numbers.adoc[]
+
+include::../common/chapters/bibliography.adoc[]
+
+include::../common/chapters/glossary.adoc[]
+
+include::../common/chapters/gfdl.adoc[]
+
diff --git a/doc/manuals/osmonitb-vty-reference.xml b/doc/manuals/osmonitb-vty-reference.xml
new file mode 100644
index 000000000..140716517
--- /dev/null
+++ b/doc/manuals/osmonitb-vty-reference.xml
@@ -0,0 +1,44 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+  ex:ts=2:sw=42sts=2:et
+  -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+-->
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN"
+"http://docbook.org/xml/5.0/dtd/docbook.dtd" [
+<!ENTITY chapter-vty      SYSTEM      "../common/chapters/vty.xml" >
+<!ENTITY sections-vty     SYSTEM      "generated/docbook_vty.xml"  >
+]>
+
+<book>
+  <info>
+    <revhistory>
+        <revision>
+            <revnumber>v1</revnumber>
+            <date>13th August 2012</date>
+            <authorinitials>hf</authorinitials>
+            <revremark>Initial</revremark>
+        </revision>
+        <revision>
+            <revnumber>v2</revnumber>
+            <date>5th March 2014</date>
+            <authorinitials>hf</authorinitials>
+            <revremark>Update to match osmo-bsc version 0.13.0-305</revremark>
+        </revision>
+    </revhistory>
+
+    <title>OsmoNITB VTY Reference</title>
+
+    <copyright>
+      <year>2012-2014</year>
+    </copyright>
+
+    <legalnotice>
+      <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved.
+      </para>
+    </legalnotice>
+  </info>
+
+  <!-- Main chapters-->
+  &chapter-vty;
+</book>
+
diff --git a/doc/manuals/vty/bsc_vty_additions.xml b/doc/manuals/vty/bsc_vty_additions.xml
new file mode 100644
index 000000000..f62f8b1c0
--- /dev/null
+++ b/doc/manuals/vty/bsc_vty_additions.xml
@@ -0,0 +1,10 @@
+<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
+    <node id='config-msc'>
+      <description>This node allows to configure the MSC connection related
+      settings.</description>
+    </node>
+    <node id='config-bsc'>
+      <description>This node allows to configure the BSC connection related
+      settings.</description>
+    </node>
+</vtydoc>
diff --git a/doc/manuals/vty/nitb_vty_additions.xml b/doc/manuals/vty/nitb_vty_additions.xml
new file mode 100644
index 000000000..7ea60dce5
--- /dev/null
+++ b/doc/manuals/vty/nitb_vty_additions.xml
@@ -0,0 +1,24 @@
+<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
+    <node id='config-mncc-int'>
+      <child_of nodeid='config' />
+      <name>MNCC Internal Configuration</name>
+      <description>This node allows to configure the default codecs for
+      the internal call control handling.</description>
+    </node>
+    <node id='config-smpp'>
+      <child_of nodeid='config' />
+      <name>SMPP Configuration</name>
+      <description>This node allows to configure the SMPP interface
+	for interfacing with external SMS applications. This section
+	contains generic/common SMPP related configuration, and no
+	per-ESME specific parameters.</description>
+    </node>
+    <node id='config-smpp-esme'>
+      <child_of nodeid='config-smpp' />
+      <name>ESME Configuration</name>
+      <description>This node allows to configure one particular SMPP
+      ESME, which is an External SMS Entity such as a SMS based
+      application server.  You can define any number of ESME within
+      the SMPP node of the OsmoNITB VTY.</description>
+    </node>
+</vtydoc>
diff --git a/doc/manuals/vty/nitb_vty_reference.xml b/doc/manuals/vty/nitb_vty_reference.xml
new file mode 100644
index 000000000..2e30dd6ec
--- /dev/null
+++ b/doc/manuals/vty/nitb_vty_reference.xml
@@ -0,0 +1,4724 @@
+<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>

+  <node id='Password'>

+  </node>

+  <node id='_1'>

+    <command id='show version'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='version' doc='Displays program version' />

+      </params>

+    </command>

+    <command id='show online-help'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='online-help' doc='Online help' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='enable'>

+      <params>

+        <param name='enable' doc='Turn on privileged mode command' />

+      </params>

+    </command>

+    <command id='terminal length &lt;0-512&gt;'>

+      <params>

+        <param name='terminal' doc='Set terminal line parameters' />

+        <param name='length' doc='Set number of lines on a screen' />

+        <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />

+      </params>

+    </command>

+    <command id='terminal no length'>

+      <params>

+        <param name='terminal' doc='Set terminal line parameters' />

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='length' doc='Set number of lines on a screen' />

+      </params>

+    </command>

+    <command id='echo .MESSAGE'>

+      <params>

+        <param name='echo' doc='Echo a message back to the vty' />

+        <param name='.MESSAGE' doc='The message to echo' />

+      </params>

+    </command>

+    <command id='who'>

+      <params>

+        <param name='who' doc='Display who is on vty' />

+      </params>

+    </command>

+    <command id='show history'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='history' doc='Display the session command history' />

+      </params>

+    </command>

+    <command id='show network'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='network' doc='Display information about a GSM NETWORK' />

+      </params>

+    </command>

+    <command id='show bts [&lt;0-255&gt;]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='bts' doc='Display information about a BTS' />

+        <param name='[&lt;0-255&gt;]' doc='BTS number' />

+      </params>

+    </command>

+    <command id='show trx [&lt;0-255&gt;] [&lt;0-255&gt;]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='trx' doc='Display information about a TRX' />

+        <param name='[&lt;0-255&gt;]' doc='BTS Number' />

+        <param name='[&lt;0-255&gt;]' doc='TRX Number' />

+      </params>

+    </command>

+    <command id='show timeslot [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='timeslot' doc='Display information about a TS' />

+        <param name='[&lt;0-255&gt;]' doc='BTS Number' />

+        <param name='[&lt;0-255&gt;]' doc='TRX Number' />

+        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />

+      </params>

+    </command>

+    <command id='show lchan [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;] [lchan_nr]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='lchan' doc='Display information about a logical channel' />

+        <param name='[&lt;0-255&gt;]' doc='BTS Number' />

+        <param name='[&lt;0-255&gt;]' doc='TRX Number' />

+        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />

+        <param name='[lchan_nr]' doc='Logical Channel Number' />

+      </params>

+    </command>

+    <command id='show lchan summary [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;] [lchan_nr]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='lchan' doc='Display information about a logical channel' />

+        <param name='summary' doc='Short summary' />

+        <param name='[&lt;0-255&gt;]' doc='BTS Number' />

+        <param name='[&lt;0-255&gt;]' doc='TRX Number' />

+        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />

+        <param name='[lchan_nr]' doc='Logical Channel Number' />

+      </params>

+    </command>

+    <command id='show paging [&lt;0-255&gt;]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='paging' doc='Display information about paging reuqests of a BTS' />

+        <param name='[&lt;0-255&gt;]' doc='BTS Number' />

+      </params>

+    </command>

+    <command id='show paging-group &lt;0-255&gt; IMSI'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='paging-group' doc='Display the paging group' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='IMSI' doc='IMSI' />

+      </params>

+    </command>

+    <command id='logging enable'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='enable' doc='Enables logging to this vty' />

+      </params>

+    </command>

+    <command id='logging disable'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='disable' doc='Disables logging to this vty' />

+      </params>

+    </command>

+    <command id='logging filter all (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='filter' doc='Filter log messages' />

+        <param name='all' doc='Do you want to log all messages?' />

+        <param name='0' doc='Only print messages matched by other filters' />

+        <param name='1' doc='Bypass filter and print all messages' />

+      </params>

+    </command>

+    <command id='logging color (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='color' doc='Configure color-printing for log messages' />

+        <param name='0' doc='Don&apos;t use color for printing messages' />

+        <param name='1' doc='Use color for printing messages' />

+      </params>

+    </command>

+    <command id='logging timestamp (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='timestamp' doc='Configure log message timestamping' />

+        <param name='0' doc='Don&apos;t prefix each log message' />

+        <param name='1' doc='Prefix each log message with current timestamp' />

+      </params>

+    </command>

+    <command id='logging print extended-timestamp (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='print' doc='Log output settings' />

+        <param name='extended-timestamp' doc='Configure log message timestamping' />

+        <param name='0' doc='Don&apos;t prefix each log message' />

+        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />

+      </params>

+    </command>

+    <command id='logging print category (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='print' doc='Log output settings' />

+        <param name='category' doc='Configure log message' />

+        <param name='0' doc='Don&apos;t prefix each log message' />

+        <param name='1' doc='Prefix each log message with category/subsystem name' />

+      </params>

+    </command>

+    <command id='logging set-log-mask MASK'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='set-log-mask' doc='Set the logmask of this logging target' />

+        <param name='MASK' doc='The logmask to use' />

+      </params>

+    </command>

+    <command id='logging set log mask MASK'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='set' doc='Decide which categories to output.' />

+        <param name='log' doc='Log commands' />

+        <param name='mask' doc='Mask commands' />

+        <param name='MASK' doc='The logmask to use' />

+      </params>

+    </command>

+    <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='level' doc='Set the log level for a specified category' />

+        <param name='all' doc='Global setting for all subsystems' />

+        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />

+        <param name='cc' doc='Layer3 Call Control (CC)' />

+        <param name='mm' doc='Layer3 Mobility Management (MM)' />

+        <param name='rr' doc='Layer3 Radio Resource (RR)' />

+        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />

+        <param name='nm' doc='A-bis Network Management / O&amp;M (NM/OML)' />

+        <param name='mncc' doc='MNCC API for Call Control application' />

+        <param name='pag' doc='Paging Subsystem' />

+        <param name='meas' doc='Radio Measurement Processing' />

+        <param name='sccp' doc='SCCP Protocol' />

+        <param name='msc' doc='Mobile Switching Center' />

+        <param name='mgcp' doc='Media Gateway Control Protocol' />

+        <param name='ho' doc='Hand-Over' />

+        <param name='db' doc='Database Layer' />

+        <param name='ref' doc='Reference Counting' />

+        <param name='gprs' doc='GPRS Packet Service' />

+        <param name='ns' doc='GPRS Network Service (NS)' />

+        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />

+        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />

+        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />

+        <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />

+        <param name='ctrl' doc='Control interface' />

+        <param name='smpp' doc='SMPP interface for external SMS apps' />

+        <param name='filter' doc='BSC/NAT IMSI based filtering' />

+        <param name='ranap' doc='Radio Access Network Application Part Protocol' />

+        <param name='sua' doc='SCCP User Adaptation Protocol' />

+        <param name='pcu' doc='PCU Interface' />

+        <param name='lglobal' doc='Library-internal global log family' />

+        <param name='llapd' doc='LAPD in libosmogsm' />

+        <param name='linp' doc='A-bis Intput Subsystem' />

+        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />

+        <param name='lmi' doc='A-bis Input Driver for Signalling' />

+        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />

+        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />

+        <param name='lctrl' doc='Control Interface' />

+        <param name='lgtp' doc='GPRS GTP library' />

+        <param name='lstats' doc='Statistics messages and logging' />

+        <param name='lgsup' doc='Generic Subscriber Update Protocol' />

+        <param name='loap' doc='Osmocom Authentication Protocol' />

+        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />

+        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />

+        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />

+        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />

+        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />

+        <param name='everything' doc='Don&apos;t use. It doesn&apos;t log anything' />

+        <param name='debug' doc='Log debug messages and higher levels' />

+        <param name='info' doc='Log informational messages and higher levels' />

+        <param name='notice' doc='Log noticeable messages and higher levels' />

+        <param name='error' doc='Log error messages and higher levels' />

+        <param name='fatal' doc='Log only fatal messages' />

+      </params>

+    </command>

+    <command id='show logging vty'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='logging' doc='Show current logging configuration' />

+        <param name='vty' doc='Show current logging configuration for this vty' />

+      </params>

+    </command>

+    <command id='show alarms'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='alarms' doc='Show current logging configuration' />

+      </params>

+    </command>

+    <command id='show stats'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='stats' doc='Show statistical values' />

+      </params>

+    </command>

+    <command id='show stats level (global|peer|subscriber)'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='stats' doc='Show statistical values' />

+        <param name='level' doc='Set the maximum group level' />

+        <param name='global' doc='Show global groups only' />

+        <param name='peer' doc='Show global and network peer related groups' />

+        <param name='subscriber' doc='Show global, peer, and subscriber groups' />

+      </params>

+    </command>

+    <command id='show asciidoc counters'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='asciidoc' doc='Asciidoc generation' />

+        <param name='counters' doc='Generate table of all registered counters' />

+      </params>

+    </command>

+    <command id='show e1_driver'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='e1_driver' doc='Display information about available E1 drivers' />

+      </params>

+    </command>

+    <command id='show e1_line [line_nr] [stats]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='e1_line' doc='Display information about a E1 line' />

+        <param name='[line_nr]' doc='E1 Line Number' />

+        <param name='[stats]' doc='Include statistics' />

+      </params>

+    </command>

+    <command id='show e1_timeslot [line_nr] [ts_nr]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='e1_timeslot' doc='Display information about a E1 timeslot' />

+        <param name='[line_nr]' doc='E1 Line Number' />

+        <param name='[ts_nr]' doc='E1 Timeslot Number' />

+      </params>

+    </command>

+    <command id='show fsm NAME'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='fsm' doc='Show information about finite state machines' />

+        <param name='NAME' doc='Display information about a single named finite state machine' />

+      </params>

+    </command>

+    <command id='show fsm all'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='fsm' doc='Show information about finite state machines' />

+        <param name='all' doc='Display a list of all registered finite state machines' />

+      </params>

+    </command>

+    <command id='show fsm-instances NAME'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='fsm-instances' doc='Show information about finite state machine instances' />

+        <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />

+      </params>

+    </command>

+    <command id='show fsm-instances all'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='fsm-instances' doc='Show information about finite state machine instances' />

+        <param name='all' doc='Display a list of all FSM instances of all finite state machine' />

+      </params>

+    </command>

+    <command id='show subscriber (extension|imsi|tmsi|id) ID'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+      </params>

+    </command>

+    <command id='show subscriber cache'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='subscriber' doc='Show information about subscribers' />

+        <param name='cache' doc='Display contents of subscriber cache' />

+      </params>

+    </command>

+    <command id='sms send pending'>

+      <params>

+        <param name='sms' doc='SMS related commands' />

+        <param name='send' doc='SMS Sending related commands' />

+        <param name='pending' doc='Send all pending SMS' />

+      </params>

+    </command>

+    <command id='subscriber create imsi ID'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='create' doc='Create new subscriber' />

+        <param name='imsi' doc='Identify the subscriber by his IMSI' />

+        <param name='ID' doc='Identifier for the subscriber' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='sms' doc='SMS Operations' />

+        <param name='sender' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='SENDER_ID' doc='Identifier for the subscriber' />

+        <param name='send' doc='Send SMS' />

+        <param name='.LINE' doc='Actual SMS Text' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID silent-sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='silent-sms' doc='Silent SMS Operations' />

+        <param name='sender' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='SENDER_ID' doc='Identifier for the subscriber' />

+        <param name='send' doc='Send SMS' />

+        <param name='.LINE' doc='Actual SMS Text' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/any|sdcch)'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='silent-call' doc='Silent call operation' />

+        <param name='start' doc='Start silent call' />

+        <param name='any' doc='Any channel' />

+        <param name='tch/f' doc='TCH/F channel' />

+        <param name='tch/any' doc='Any TCH channel' />

+        <param name='sdcch' doc='SDCCH channel' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID silent-call stop'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='silent-call' doc='Silent call operation' />

+        <param name='stop' doc='Stop silent call' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='ussd-notify' doc='Send a USSD notify to the subscriber' />

+        <param name='0' doc='Alerting Level 0' />

+        <param name='1' doc='Alerting Level 1' />

+        <param name='2' doc='Alerting Level 2' />

+        <param name='.TEXT' doc='Text of USSD message to send' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />

+        <param name='close-loop' doc='Close a TCH Loop inside the MS' />

+        <param name='a' doc='Loop Type A' />

+        <param name='b' doc='Loop Type B' />

+        <param name='c' doc='Loop Type C' />

+        <param name='d' doc='Loop Type D' />

+        <param name='e' doc='Loop Type E' />

+        <param name='f' doc='Loop Type F' />

+        <param name='i' doc='Loop Type I' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID ms-test open-loop'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />

+        <param name='open-loop' doc='Open a TCH Loop inside the MS' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID update'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='update' doc='Update the subscriber data from the dabase.' />

+      </params>

+    </command>

+    <command id='show statistics'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='statistics' doc='Display network statistics' />

+      </params>

+    </command>

+    <command id='show sms-queue'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='sms-queue' doc='Display SMSqueue statistics' />

+      </params>

+    </command>

+    <command id='logging filter imsi IMSI'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='filter' doc='Filter log messages' />

+        <param name='imsi' doc='Filter log messages by IMSI' />

+        <param name='IMSI' doc='IMSI to be used as filter' />

+      </params>

+    </command>

+    <command id='show smpp esme'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='smpp' doc='SMPP Interface' />

+        <param name='esme' doc='SMPP Extrenal SMS Entity' />

+      </params>

+    </command>

+  </node>

+  <node id='Password_2'>

+  </node>

+  <node id='_2'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='disable'>

+      <params>

+        <param name='disable' doc='Turn off privileged mode command' />

+      </params>

+    </command>

+    <command id='configure terminal'>

+      <params>

+        <param name='configure' doc='Configuration from vty interface' />

+        <param name='terminal' doc='Configuration terminal' />

+      </params>

+    </command>

+    <command id='copy running-config startup-config'>

+      <params>

+        <param name='copy' doc='Copy configuration' />

+        <param name='running-config' doc='Copy running config to... ' />

+        <param name='startup-config' doc='Copy running config to startup config (same as write file)' />

+      </params>

+    </command>

+    <command id='show startup-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='startup-config' doc='Contentes of startup configuration' />

+      </params>

+    </command>

+    <command id='show version'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='version' doc='Displays program version' />

+      </params>

+    </command>

+    <command id='show online-help'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='online-help' doc='Online help' />

+      </params>

+    </command>

+    <command id='terminal length &lt;0-512&gt;'>

+      <params>

+        <param name='terminal' doc='Set terminal line parameters' />

+        <param name='length' doc='Set number of lines on a screen' />

+        <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />

+      </params>

+    </command>

+    <command id='terminal no length'>

+      <params>

+        <param name='terminal' doc='Set terminal line parameters' />

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='length' doc='Set number of lines on a screen' />

+      </params>

+    </command>

+    <command id='echo .MESSAGE'>

+      <params>

+        <param name='echo' doc='Echo a message back to the vty' />

+        <param name='.MESSAGE' doc='The message to echo' />

+      </params>

+    </command>

+    <command id='who'>

+      <params>

+        <param name='who' doc='Display who is on vty' />

+      </params>

+    </command>

+    <command id='show history'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='history' doc='Display the session command history' />

+      </params>

+    </command>

+    <command id='terminal monitor'>

+      <params>

+        <param name='terminal' doc='Set terminal line parameters' />

+        <param name='monitor' doc='Copy debug output to the current terminal line' />

+      </params>

+    </command>

+    <command id='terminal no monitor'>

+      <params>

+        <param name='terminal' doc='Set terminal line parameters' />

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='monitor' doc='Copy debug output to the current terminal line' />

+      </params>

+    </command>

+    <command id='show network'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='network' doc='Display information about a GSM NETWORK' />

+      </params>

+    </command>

+    <command id='show bts [&lt;0-255&gt;]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='bts' doc='Display information about a BTS' />

+        <param name='[&lt;0-255&gt;]' doc='BTS number' />

+      </params>

+    </command>

+    <command id='show trx [&lt;0-255&gt;] [&lt;0-255&gt;]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='trx' doc='Display information about a TRX' />

+        <param name='[&lt;0-255&gt;]' doc='BTS Number' />

+        <param name='[&lt;0-255&gt;]' doc='TRX Number' />

+      </params>

+    </command>

+    <command id='show timeslot [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='timeslot' doc='Display information about a TS' />

+        <param name='[&lt;0-255&gt;]' doc='BTS Number' />

+        <param name='[&lt;0-255&gt;]' doc='TRX Number' />

+        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />

+      </params>

+    </command>

+    <command id='show lchan [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;] [lchan_nr]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='lchan' doc='Display information about a logical channel' />

+        <param name='[&lt;0-255&gt;]' doc='BTS Number' />

+        <param name='[&lt;0-255&gt;]' doc='TRX Number' />

+        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />

+        <param name='[lchan_nr]' doc='Logical Channel Number' />

+      </params>

+    </command>

+    <command id='show lchan summary [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;] [lchan_nr]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='lchan' doc='Display information about a logical channel' />

+        <param name='summary' doc='Short summary' />

+        <param name='[&lt;0-255&gt;]' doc='BTS Number' />

+        <param name='[&lt;0-255&gt;]' doc='TRX Number' />

+        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />

+        <param name='[lchan_nr]' doc='Logical Channel Number' />

+      </params>

+    </command>

+    <command id='show paging [&lt;0-255&gt;]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='paging' doc='Display information about paging reuqests of a BTS' />

+        <param name='[&lt;0-255&gt;]' doc='BTS Number' />

+      </params>

+    </command>

+    <command id='show paging-group &lt;0-255&gt; IMSI'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='paging-group' doc='Display the paging group' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='IMSI' doc='IMSI' />

+      </params>

+    </command>

+    <command id='logging enable'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='enable' doc='Enables logging to this vty' />

+      </params>

+    </command>

+    <command id='logging disable'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='disable' doc='Disables logging to this vty' />

+      </params>

+    </command>

+    <command id='logging filter all (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='filter' doc='Filter log messages' />

+        <param name='all' doc='Do you want to log all messages?' />

+        <param name='0' doc='Only print messages matched by other filters' />

+        <param name='1' doc='Bypass filter and print all messages' />

+      </params>

+    </command>

+    <command id='logging color (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='color' doc='Configure color-printing for log messages' />

+        <param name='0' doc='Don&apos;t use color for printing messages' />

+        <param name='1' doc='Use color for printing messages' />

+      </params>

+    </command>

+    <command id='logging timestamp (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='timestamp' doc='Configure log message timestamping' />

+        <param name='0' doc='Don&apos;t prefix each log message' />

+        <param name='1' doc='Prefix each log message with current timestamp' />

+      </params>

+    </command>

+    <command id='logging print extended-timestamp (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='print' doc='Log output settings' />

+        <param name='extended-timestamp' doc='Configure log message timestamping' />

+        <param name='0' doc='Don&apos;t prefix each log message' />

+        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />

+      </params>

+    </command>

+    <command id='logging print category (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='print' doc='Log output settings' />

+        <param name='category' doc='Configure log message' />

+        <param name='0' doc='Don&apos;t prefix each log message' />

+        <param name='1' doc='Prefix each log message with category/subsystem name' />

+      </params>

+    </command>

+    <command id='logging set-log-mask MASK'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='set-log-mask' doc='Set the logmask of this logging target' />

+        <param name='MASK' doc='The logmask to use' />

+      </params>

+    </command>

+    <command id='logging set log mask MASK'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='set' doc='Decide which categories to output.' />

+        <param name='log' doc='Log commands' />

+        <param name='mask' doc='Mask commands' />

+        <param name='MASK' doc='The logmask to use' />

+      </params>

+    </command>

+    <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='level' doc='Set the log level for a specified category' />

+        <param name='all' doc='Global setting for all subsystems' />

+        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />

+        <param name='cc' doc='Layer3 Call Control (CC)' />

+        <param name='mm' doc='Layer3 Mobility Management (MM)' />

+        <param name='rr' doc='Layer3 Radio Resource (RR)' />

+        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />

+        <param name='nm' doc='A-bis Network Management / O&amp;M (NM/OML)' />

+        <param name='mncc' doc='MNCC API for Call Control application' />

+        <param name='pag' doc='Paging Subsystem' />

+        <param name='meas' doc='Radio Measurement Processing' />

+        <param name='sccp' doc='SCCP Protocol' />

+        <param name='msc' doc='Mobile Switching Center' />

+        <param name='mgcp' doc='Media Gateway Control Protocol' />

+        <param name='ho' doc='Hand-Over' />

+        <param name='db' doc='Database Layer' />

+        <param name='ref' doc='Reference Counting' />

+        <param name='gprs' doc='GPRS Packet Service' />

+        <param name='ns' doc='GPRS Network Service (NS)' />

+        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />

+        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />

+        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />

+        <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />

+        <param name='ctrl' doc='Control interface' />

+        <param name='smpp' doc='SMPP interface for external SMS apps' />

+        <param name='filter' doc='BSC/NAT IMSI based filtering' />

+        <param name='ranap' doc='Radio Access Network Application Part Protocol' />

+        <param name='sua' doc='SCCP User Adaptation Protocol' />

+        <param name='pcu' doc='PCU Interface' />

+        <param name='lglobal' doc='Library-internal global log family' />

+        <param name='llapd' doc='LAPD in libosmogsm' />

+        <param name='linp' doc='A-bis Intput Subsystem' />

+        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />

+        <param name='lmi' doc='A-bis Input Driver for Signalling' />

+        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />

+        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />

+        <param name='lctrl' doc='Control Interface' />

+        <param name='lgtp' doc='GPRS GTP library' />

+        <param name='lstats' doc='Statistics messages and logging' />

+        <param name='lgsup' doc='Generic Subscriber Update Protocol' />

+        <param name='loap' doc='Osmocom Authentication Protocol' />

+        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />

+        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />

+        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />

+        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />

+        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />

+        <param name='everything' doc='Don&apos;t use. It doesn&apos;t log anything' />

+        <param name='debug' doc='Log debug messages and higher levels' />

+        <param name='info' doc='Log informational messages and higher levels' />

+        <param name='notice' doc='Log noticeable messages and higher levels' />

+        <param name='error' doc='Log error messages and higher levels' />

+        <param name='fatal' doc='Log only fatal messages' />

+      </params>

+    </command>

+    <command id='show logging vty'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='logging' doc='Show current logging configuration' />

+        <param name='vty' doc='Show current logging configuration for this vty' />

+      </params>

+    </command>

+    <command id='show alarms'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='alarms' doc='Show current logging configuration' />

+      </params>

+    </command>

+    <command id='show stats'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='stats' doc='Show statistical values' />

+      </params>

+    </command>

+    <command id='show stats level (global|peer|subscriber)'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='stats' doc='Show statistical values' />

+        <param name='level' doc='Set the maximum group level' />

+        <param name='global' doc='Show global groups only' />

+        <param name='peer' doc='Show global and network peer related groups' />

+        <param name='subscriber' doc='Show global, peer, and subscriber groups' />

+      </params>

+    </command>

+    <command id='show asciidoc counters'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='asciidoc' doc='Asciidoc generation' />

+        <param name='counters' doc='Generate table of all registered counters' />

+      </params>

+    </command>

+    <command id='drop bts connection &lt;0-65535&gt; (oml|rsl)'>

+      <params>

+        <param name='drop' doc='Debug/Simulation command to drop Abis/IP BTS' />

+        <param name='bts' doc='Debug/Simulation command to drop Abis/IP BTS' />

+        <param name='connection' doc='Debug/Simulation command to drop Abis/IP BTS' />

+        <param name='&lt;0-65535&gt;' doc='BTS NR' />

+        <param name='oml' doc='Drop OML Connection' />

+        <param name='rsl' doc='Drop RSL Connection' />

+      </params>

+    </command>

+    <command id='restart-bts &lt;0-65535&gt;'>

+      <params>

+        <param name='restart-bts' doc='Restart ip.access nanoBTS through OML' />

+        <param name='&lt;0-65535&gt;' doc='BTS Number' />

+      </params>

+    </command>

+    <command id='bts &lt;0-255&gt; resend-system-information'>

+      <params>

+        <param name='bts' doc='BTS Specific Commands' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='resend-system-information' doc='Re-generate + re-send BCCH SYSTEM INFORMATION' />

+      </params>

+    </command>

+    <command id='bts &lt;0-255&gt; trx &lt;0-255&gt; timeslot &lt;0-7&gt; pdch (activate|deactivate)'>

+      <params>

+        <param name='bts' doc='BTS related commands' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='trx' doc='Transceiver' />

+        <param name='&lt;0-255&gt;' doc='Transceiver Number' />

+        <param name='timeslot' doc='TRX Timeslot' />

+        <param name='&lt;0-7&gt;' doc='Timeslot Number' />

+        <param name='pdch' doc='Packet Data Channel' />

+        <param name='activate' doc='Activate Dynamic PDCH/TCH (-&gt; PDCH mode)' />

+        <param name='deactivate' doc='Deactivate Dynamic PDCH/TCH (-&gt; TCH mode)' />

+      </params>

+    </command>

+    <command id='bts &lt;0-255&gt; trx &lt;0-255&gt; timeslot &lt;0-7&gt; sub-slot &lt;0-7&gt; (activate|deactivate) (hr|fr|efr|amr) [&lt;0-7&gt;]'>

+      <params>

+        <param name='bts' doc='BTS related commands' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='trx' doc='Transceiver' />

+        <param name='&lt;0-255&gt;' doc='Transceiver Number' />

+        <param name='timeslot' doc='TRX Timeslot' />

+        <param name='&lt;0-7&gt;' doc='Timeslot Number' />

+        <param name='sub-slot' doc='Sub-Slot Number' />

+        <param name='&lt;0-7&gt;' doc='Sub-Slot Number' />

+        <param name='activate' doc='Manual Channel Activation (e.g. for BER test)' />

+        <param name='deactivate' doc='Manual Channel Deactivation (e.g. for BER test)' />

+        <param name='hr' doc='Half-Rate v1' />

+        <param name='fr' doc='Full-Rate' />

+        <param name='efr' doc='Enhanced Full Rate' />

+        <param name='amr' doc='Adaptive Multi-Rate' />

+        <param name='[&lt;0-7&gt;]' doc='AMR Mode' />

+      </params>

+    </command>

+    <command id='bts &lt;0-255&gt; trx &lt;0-255&gt; timeslot &lt;0-7&gt; sub-slot &lt;0-7&gt; mdcx A.B.C.D &lt;0-65535&gt;'>

+      <params>

+        <param name='bts' doc='BTS related commands' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='trx' doc='Transceiver' />

+        <param name='&lt;0-255&gt;' doc='Transceiver Number' />

+        <param name='timeslot' doc='TRX Timeslot' />

+        <param name='&lt;0-7&gt;' doc='Timeslot Number' />

+        <param name='sub-slot' doc='Sub-Slot' />

+        <param name='&lt;0-7&gt;' doc='Sub-Slot Number' />

+        <param name='mdcx' doc='Modify RTP Connection' />

+        <param name='A.B.C.D' doc='MGW IP Address' />

+        <param name='&lt;0-65535&gt;' doc='MGW UDP Port' />

+      </params>

+    </command>

+    <command id='bts &lt;0-255&gt; smscb-command &lt;1-4&gt; HEXSTRING'>

+      <params>

+        <param name='bts' doc='BTS related commands' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='smscb-command' doc='SMS Cell Broadcast' />

+        <param name='&lt;1-4&gt;' doc='Last Valid Block' />

+        <param name='HEXSTRING' doc='Hex Encoded SMSCB message (up to 88 octets)' />

+      </params>

+    </command>

+    <command id='ctrl-interface generate-trap TRAP VALUE'>

+      <params>

+        <param name='ctrl-interface' doc='Commands related to the CTRL Interface' />

+        <param name='generate-trap' doc='Generate a TRAP for test purpose' />

+        <param name='TRAP' doc='Identity/Name of the TRAP variable' />

+        <param name='VALUE' doc='Value of the TRAP variable' />

+      </params>

+    </command>

+    <command id='bts &lt;0-255&gt; oml class (site-manager|bts|radio-carrier|baseband-transceiver|channel|adjc|handover|power-contorl|btse|rack|test|envabtse|bport|gprs-nse|gprs-cell|gprs-nsvc|siemenshw) instance &lt;0-255&gt; &lt;0-255&gt; &lt;0-255&gt;'>

+      <params>

+        <param name='bts' doc='BTS related commands' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='oml' doc='Manipulate the OML managed objects' />

+        <param name='class' doc='Object Class' />

+        <param name='site-manager' doc='Site Manager Object' />

+        <param name='bts' doc='BTS Object' />

+        <param name='radio-carrier' doc='Radio Carrier Object' />

+        <param name='baseband-transceiver' doc='Baseband Transceiver Object' />

+        <param name='channel' doc='Channel (Timeslot) Object' />

+        <param name='adjc' doc='Adjacent Object (Siemens)' />

+        <param name='handover' doc='Handover Object (Siemens)' />

+        <param name='power-contorl' doc='Power Control Object (Siemens)' />

+        <param name='btse' doc='BTSE Object (Siemens)' />

+        <param name='rack' doc='Rack Object (Siemens)' />

+        <param name='test' doc='Test Object (Siemens)' />

+        <param name='envabtse' doc='ENVABTSE Object (Siemens)' />

+        <param name='bport' doc='BPORT Object (Siemens)' />

+        <param name='gprs-nse' doc='GPRS NSE Object (ip.access/osmo-bts)' />

+        <param name='gprs-cell' doc='GPRS Cell Object (ip.acecss/osmo-bts)' />

+        <param name='gprs-nsvc' doc='GPRS NSVC Object (ip.acecss/osmo-bts)' />

+        <param name='siemenshw' doc='SIEMENSHW Object (Siemens)' />

+        <param name='instance' doc='Object Instance' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='&lt;0-255&gt;' doc='TRX Number' />

+        <param name='&lt;0-255&gt;' doc='TS Number' />

+      </params>

+    </command>

+    <command id='bts &lt;0-255&gt; oml class &lt;0-255&gt; instance &lt;0-255&gt; &lt;0-255&gt; &lt;0-255&gt;'>

+      <params>

+        <param name='bts' doc='BTS related commands' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='oml' doc='Manipulate the OML managed objects' />

+        <param name='class' doc='Object Class' />

+        <param name='&lt;0-255&gt;' doc='Object Class' />

+        <param name='instance' doc='Object Instance' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='&lt;0-255&gt;' doc='TRX Number' />

+        <param name='&lt;0-255&gt;' doc='TS Number' />

+      </params>

+    </command>

+    <command id='bts &lt;0-255&gt; om2000 class (trxc|ts|tf|is|con|dp|cf|tx|rx) &lt;0-255&gt; &lt;0-255&gt; &lt;0-255&gt;'>

+      <params>

+        <param name='bts' doc='BTS related commands' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='om2000' doc='Manipulate the OM2000 managed objects' />

+        <param name='class' doc='Object Class' />

+        <param name='trxc' doc='TRX Controller' />

+        <param name='ts' doc='Timeslot' />

+        <param name='tf' doc='Timing Function' />

+        <param name='is' doc='Interface Switch' />

+        <param name='con' doc='Abis Concentrator' />

+        <param name='dp' doc='Digital Path' />

+        <param name='cf' doc='Central Function' />

+        <param name='tx' doc='Transmitter' />

+        <param name='rx' doc='Receiver' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='&lt;0-255&gt;' doc='Associated SO Instance' />

+        <param name='&lt;0-255&gt;' doc='Instance Number' />

+      </params>

+    </command>

+    <command id='bts &lt;0-255&gt; om2000 class &lt;0-255&gt; &lt;0-255&gt; &lt;0-255&gt; &lt;0-255&gt;'>

+      <params>

+        <param name='bts' doc='BTS related commands' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='om2000' doc='Manipulate the OML managed objects' />

+        <param name='class' doc='Object Class' />

+        <param name='&lt;0-255&gt;' doc='Object Class' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+        <param name='&lt;0-255&gt;' doc='Associated SO Instance' />

+        <param name='&lt;0-255&gt;' doc='Instance Number' />

+      </params>

+    </command>

+    <command id='show e1_driver'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='e1_driver' doc='Display information about available E1 drivers' />

+      </params>

+    </command>

+    <command id='show e1_line [line_nr] [stats]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='e1_line' doc='Display information about a E1 line' />

+        <param name='[line_nr]' doc='E1 Line Number' />

+        <param name='[stats]' doc='Include statistics' />

+      </params>

+    </command>

+    <command id='show e1_timeslot [line_nr] [ts_nr]'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='e1_timeslot' doc='Display information about a E1 timeslot' />

+        <param name='[line_nr]' doc='E1 Line Number' />

+        <param name='[ts_nr]' doc='E1 Timeslot Number' />

+      </params>

+    </command>

+    <command id='show fsm NAME'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='fsm' doc='Show information about finite state machines' />

+        <param name='NAME' doc='Display information about a single named finite state machine' />

+      </params>

+    </command>

+    <command id='show fsm all'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='fsm' doc='Show information about finite state machines' />

+        <param name='all' doc='Display a list of all registered finite state machines' />

+      </params>

+    </command>

+    <command id='show fsm-instances NAME'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='fsm-instances' doc='Show information about finite state machine instances' />

+        <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />

+      </params>

+    </command>

+    <command id='show fsm-instances all'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='fsm-instances' doc='Show information about finite state machine instances' />

+        <param name='all' doc='Display a list of all FSM instances of all finite state machine' />

+      </params>

+    </command>

+    <command id='show subscriber (extension|imsi|tmsi|id) ID'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+      </params>

+    </command>

+    <command id='show subscriber cache'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='subscriber' doc='Show information about subscribers' />

+        <param name='cache' doc='Display contents of subscriber cache' />

+      </params>

+    </command>

+    <command id='sms send pending'>

+      <params>

+        <param name='sms' doc='SMS related commands' />

+        <param name='send' doc='SMS Sending related commands' />

+        <param name='pending' doc='Send all pending SMS' />

+      </params>

+    </command>

+    <command id='subscriber create imsi ID'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='create' doc='Create new subscriber' />

+        <param name='imsi' doc='Identify the subscriber by his IMSI' />

+        <param name='ID' doc='Identifier for the subscriber' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='sms' doc='SMS Operations' />

+        <param name='sender' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='SENDER_ID' doc='Identifier for the subscriber' />

+        <param name='send' doc='Send SMS' />

+        <param name='.LINE' doc='Actual SMS Text' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID silent-sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='silent-sms' doc='Silent SMS Operations' />

+        <param name='sender' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='SENDER_ID' doc='Identifier for the subscriber' />

+        <param name='send' doc='Send SMS' />

+        <param name='.LINE' doc='Actual SMS Text' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/any|sdcch)'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='silent-call' doc='Silent call operation' />

+        <param name='start' doc='Start silent call' />

+        <param name='any' doc='Any channel' />

+        <param name='tch/f' doc='TCH/F channel' />

+        <param name='tch/any' doc='Any TCH channel' />

+        <param name='sdcch' doc='SDCCH channel' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID silent-call stop'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='silent-call' doc='Silent call operation' />

+        <param name='stop' doc='Stop silent call' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='ussd-notify' doc='Send a USSD notify to the subscriber' />

+        <param name='0' doc='Alerting Level 0' />

+        <param name='1' doc='Alerting Level 1' />

+        <param name='2' doc='Alerting Level 2' />

+        <param name='.TEXT' doc='Text of USSD message to send' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />

+        <param name='close-loop' doc='Close a TCH Loop inside the MS' />

+        <param name='a' doc='Loop Type A' />

+        <param name='b' doc='Loop Type B' />

+        <param name='c' doc='Loop Type C' />

+        <param name='d' doc='Loop Type D' />

+        <param name='e' doc='Loop Type E' />

+        <param name='f' doc='Loop Type F' />

+        <param name='i' doc='Loop Type I' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID ms-test open-loop'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />

+        <param name='open-loop' doc='Open a TCH Loop inside the MS' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID update'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='update' doc='Update the subscriber data from the dabase.' />

+      </params>

+    </command>

+    <command id='show statistics'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='statistics' doc='Display network statistics' />

+      </params>

+    </command>

+    <command id='show sms-queue'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='sms-queue' doc='Display SMSqueue statistics' />

+      </params>

+    </command>

+    <command id='logging filter imsi IMSI'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='filter' doc='Filter log messages' />

+        <param name='imsi' doc='Filter log messages by IMSI' />

+        <param name='IMSI' doc='IMSI to be used as filter' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID delete'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='delete' doc='Delete subscriber in HLR' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID expire'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='expire' doc='Expire the subscriber Now' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID name .NAME'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='name' doc='Set the name of the subscriber' />

+        <param name='.NAME' doc='Name of the Subscriber' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID extension EXTENSION'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='extension' doc='Set the extension (phone number) of the subscriber' />

+        <param name='EXTENSION' doc='Extension (phone number)' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID authorized (0|1)'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='authorized' doc='(De-)Authorize subscriber in HLR' />

+        <param name='0' doc='Subscriber should NOT be authorized' />

+        <param name='1' doc='Subscriber should be authorized' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID a3a8 (none|xor|comp128v1) [KI]'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='a3a8' doc='Set a3a8 parameters for the subscriber' />

+        <param name='none' doc='Use No A3A8 algorithm' />

+        <param name='xor' doc='Use XOR algorithm' />

+        <param name='comp128v1' doc='Use COMP128v1 algorithm' />

+        <param name='[KI]' doc='Encryption Key Ki' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID handover BTS_NR'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='handover' doc='Handover the active connection' />

+        <param name='BTS_NR' doc='Number of the BTS to handover to' />

+      </params>

+    </command>

+    <command id='subscriber purge-inactive'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='purge-inactive' doc='Purge subscribers with a zero use count.' />

+      </params>

+    </command>

+    <command id='sms-queue trigger'>

+      <params>

+        <param name='sms-queue' doc='SMS Queue' />

+        <param name='trigger' doc='Trigger sending messages' />

+      </params>

+    </command>

+    <command id='sms-queue max-pending &lt;1-500&gt;'>

+      <params>

+        <param name='sms-queue' doc='SMS Queue' />

+        <param name='max-pending' doc='SMS to deliver in parallel' />

+        <param name='&lt;1-500&gt;' doc='Amount' />

+      </params>

+    </command>

+    <command id='sms-queue clear'>

+      <params>

+        <param name='sms-queue' doc='SMS Queue' />

+        <param name='clear' doc='Clear the queue of pending SMS' />

+      </params>

+    </command>

+    <command id='sms-queue max-failure &lt;1-500&gt;'>

+      <params>

+        <param name='sms-queue' doc='SMS Queue' />

+        <param name='max-failure' doc='Maximum amount of delivery failures' />

+        <param name='&lt;1-500&gt;' doc='Amount' />

+      </params>

+    </command>

+    <command id='subscriber (extension|imsi|tmsi|id) ID sms pending-send'>

+      <params>

+        <param name='subscriber' doc='Operations on a Subscriber' />

+        <param name='extension' doc='Identify subscriber by extension (phone number)' />

+        <param name='imsi' doc='Identify subscriber by IMSI' />

+        <param name='tmsi' doc='Identify subscriber by TMSI' />

+        <param name='id' doc='Identify subscriber by database ID' />

+        <param name='ID' doc='Identifier for the subscriber' />

+        <param name='sms' doc='SMS Operations' />

+        <param name='pending-send' doc='Send pending SMS' />

+      </params>

+    </command>

+    <command id='meas-feed scenario NAME'>

+      <params>

+        <param name='meas-feed' doc='Measurement export related' />

+        <param name='scenario' doc='scenario' />

+        <param name='NAME' doc='Name up to 31 characters included in report' />

+      </params>

+    </command>

+    <command id='show smpp esme'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='smpp' doc='SMPP Interface' />

+        <param name='esme' doc='SMPP Extrenal SMS Entity' />

+      </params>

+    </command>

+  </node>

+  <node id='config'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='hostname WORD'>

+      <params>

+        <param name='hostname' doc='Set system&apos;s network name' />

+        <param name='WORD' doc='This system&apos;s network name' />

+      </params>

+    </command>

+    <command id='no hostname [HOSTNAME]'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='hostname' doc='Reset system&apos;s network name' />

+        <param name='[HOSTNAME]' doc='Host name of this router' />

+      </params>

+    </command>

+    <command id='password (8|) WORD'>

+      <params>

+        <param name='password' doc='Assign the terminal connection password' />

+        <param name='8' doc='Specifies a HIDDEN password will follow' />

+        <param name='' doc='dummy string ' />

+        <param name='WORD' doc='The HIDDEN line password string' />

+      </params>

+    </command>

+    <command id='password LINE'>

+      <params>

+        <param name='password' doc='Assign the terminal connection password' />

+        <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />

+      </params>

+    </command>

+    <command id='enable password (8|) WORD'>

+      <params>

+        <param name='enable' doc='Modify enable password parameters' />

+        <param name='password' doc='Assign the privileged level password' />

+        <param name='8' doc='Specifies a HIDDEN password will follow' />

+        <param name='' doc='dummy string ' />

+        <param name='WORD' doc='The HIDDEN &apos;enable&apos; password string' />

+      </params>

+    </command>

+    <command id='enable password LINE'>

+      <params>

+        <param name='enable' doc='Modify enable password parameters' />

+        <param name='password' doc='Assign the privileged level password' />

+        <param name='LINE' doc='The UNENCRYPTED (cleartext) &apos;enable&apos; password' />

+      </params>

+    </command>

+    <command id='no enable password'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='enable' doc='Modify enable password parameters' />

+        <param name='password' doc='Assign the privileged level password' />

+      </params>

+    </command>

+    <command id='banner motd default'>

+      <params>

+        <param name='banner' doc='Set banner string' />

+        <param name='motd' doc='Strings for motd' />

+        <param name='default' doc='Default string' />

+      </params>

+    </command>

+    <command id='banner motd file [FILE]'>

+      <params>

+        <param name='banner' doc='Set banner' />

+        <param name='motd' doc='Banner for motd' />

+        <param name='file' doc='Banner from a file' />

+        <param name='[FILE]' doc='Filename' />

+      </params>

+    </command>

+    <command id='no banner motd'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='banner' doc='Set banner string' />

+        <param name='motd' doc='Strings for motd' />

+      </params>

+    </command>

+    <command id='service terminal-length &lt;0-512&gt;'>

+      <params>

+        <param name='service' doc='Set up miscellaneous service' />

+        <param name='terminal-length' doc='System wide terminal length configuration' />

+        <param name='&lt;0-512&gt;' doc='Number of lines of VTY (0 means no line control)' />

+      </params>

+    </command>

+    <command id='no service terminal-length [&lt;0-512&gt;]'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='service' doc='Set up miscellaneous service' />

+        <param name='terminal-length' doc='System wide terminal length configuration' />

+        <param name='[&lt;0-512&gt;]' doc='Number of lines of VTY (0 means no line control)' />

+      </params>

+    </command>

+    <command id='line vty'>

+      <params>

+        <param name='line' doc='Configure a terminal line' />

+        <param name='vty' doc='Virtual terminal' />

+      </params>

+    </command>

+    <command id='service advanced-vty'>

+      <params>

+        <param name='service' doc='Set up miscellaneous service' />

+        <param name='advanced-vty' doc='Enable advanced mode vty interface' />

+      </params>

+    </command>

+    <command id='no service advanced-vty'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='service' doc='Set up miscellaneous service' />

+        <param name='advanced-vty' doc='Enable advanced mode vty interface' />

+      </params>

+    </command>

+    <command id='show history'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='history' doc='Display the session command history' />

+      </params>

+    </command>

+    <command id='network'>

+      <params>

+        <param name='network' doc='Configure the GSM network' />

+      </params>

+    </command>

+    <command id='log stderr'>

+      <params>

+        <param name='log' doc='Configure logging sub-system' />

+        <param name='stderr' doc='Logging via STDERR of the process' />

+      </params>

+    </command>

+    <command id='no log stderr'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='log' doc='Configure logging sub-system' />

+        <param name='stderr' doc='Logging via STDERR of the process' />

+      </params>

+    </command>

+    <command id='log file .FILENAME'>

+      <params>

+        <param name='log' doc='Configure logging sub-system' />

+        <param name='file' doc='Logging to text file' />

+        <param name='.FILENAME' doc='Filename' />

+      </params>

+    </command>

+    <command id='no log file .FILENAME'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='log' doc='Configure logging sub-system' />

+        <param name='file' doc='Logging to text file' />

+        <param name='.FILENAME' doc='Filename' />

+      </params>

+    </command>

+    <command id='log alarms &lt;2-32700&gt;'>

+      <params>

+        <param name='log' doc='Configure logging sub-system' />

+        <param name='alarms' doc='Logging alarms to osmo_strrb' />

+        <param name='&lt;2-32700&gt;' doc='Maximum number of messages to log' />

+      </params>

+    </command>

+    <command id='no log alarms'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='log' doc='Configure logging sub-system' />

+        <param name='alarms' doc='Logging alarms to osmo_strrb' />

+      </params>

+    </command>

+    <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>

+      <params>

+        <param name='log' doc='Configure logging sub-system' />

+        <param name='syslog' doc='Logging via syslog' />

+        <param name='authpriv' doc='Security/authorization messages facility' />

+        <param name='cron' doc='Clock daemon (cron/at) facility' />

+        <param name='daemon' doc='General system daemon facility' />

+        <param name='ftp' doc='Ftp daemon facility' />

+        <param name='lpr' doc='Line printer facility' />

+        <param name='mail' doc='Mail facility' />

+        <param name='news' doc='News facility' />

+        <param name='user' doc='Generic facility' />

+        <param name='uucp' doc='UUCP facility' />

+      </params>

+    </command>

+    <command id='log syslog local &lt;0-7&gt;'>

+      <params>

+        <param name='log' doc='Configure logging sub-system' />

+        <param name='syslog' doc='Logging via syslog' />

+        <param name='local' doc='Syslog LOCAL facility' />

+        <param name='&lt;0-7&gt;' doc='Local facility number' />

+      </params>

+    </command>

+    <command id='no log syslog'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='log' doc='Configure logging sub-system' />

+        <param name='syslog' doc='Logging via syslog' />

+      </params>

+    </command>

+    <command id='log gsmtap [HOSTNAME]'>

+      <params>

+        <param name='log' doc='Configure logging sub-system' />

+        <param name='gsmtap' doc='Logging via GSMTAP' />

+        <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />

+      </params>

+    </command>

+    <command id='stats reporter statsd'>

+      <params>

+        <param name='stats' doc='Configure stats sub-system' />

+        <param name='reporter' doc='Configure a stats reporter' />

+        <param name='statsd' doc='Report to a STATSD server' />

+      </params>

+    </command>

+    <command id='no stats reporter statsd'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='stats' doc='Configure stats sub-system' />

+        <param name='reporter' doc='Configure a stats reporter' />

+        <param name='statsd' doc='Report to a STATSD server' />

+      </params>

+    </command>

+    <command id='stats reporter log'>

+      <params>

+        <param name='stats' doc='Configure stats sub-system' />

+        <param name='reporter' doc='Configure a stats reporter' />

+        <param name='log' doc='Report to the logger' />

+      </params>

+    </command>

+    <command id='no stats reporter log'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='stats' doc='Configure stats sub-system' />

+        <param name='reporter' doc='Configure a stats reporter' />

+        <param name='log' doc='Report to the logger' />

+      </params>

+    </command>

+    <command id='stats interval &lt;1-65535&gt;'>

+      <params>

+        <param name='stats' doc='Configure stats sub-system' />

+        <param name='interval' doc='Set the reporting interval' />

+        <param name='&lt;1-65535&gt;' doc='Interval in seconds' />

+      </params>

+    </command>

+    <command id='e1_input'>

+      <params>

+        <param name='e1_input' doc='Configure E1/T1/J1 TDM input' />

+      </params>

+    </command>

+    <command id='mncc-int'>

+      <params>

+        <param name='mncc-int' doc='Configure internal MNCC handler' />

+      </params>

+    </command>

+    <command id='nitb'>

+      <params>

+        <param name='nitb' doc='Configure NITB options' />

+      </params>

+    </command>

+    <command id='ctrl'>

+      <params>

+        <param name='ctrl' doc='Configure the Control Interface' />

+      </params>

+    </command>

+    <command id='smpp'>

+      <params>

+        <param name='smpp' doc='Configure SMPP SMS Interface' />

+      </params>

+    </command>

+  </node>

+  <node id='config-log'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='logging filter all (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='filter' doc='Filter log messages' />

+        <param name='all' doc='Do you want to log all messages?' />

+        <param name='0' doc='Only print messages matched by other filters' />

+        <param name='1' doc='Bypass filter and print all messages' />

+      </params>

+    </command>

+    <command id='logging color (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='color' doc='Configure color-printing for log messages' />

+        <param name='0' doc='Don&apos;t use color for printing messages' />

+        <param name='1' doc='Use color for printing messages' />

+      </params>

+    </command>

+    <command id='logging timestamp (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='timestamp' doc='Configure log message timestamping' />

+        <param name='0' doc='Don&apos;t prefix each log message' />

+        <param name='1' doc='Prefix each log message with current timestamp' />

+      </params>

+    </command>

+    <command id='logging print extended-timestamp (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='print' doc='Log output settings' />

+        <param name='extended-timestamp' doc='Configure log message timestamping' />

+        <param name='0' doc='Don&apos;t prefix each log message' />

+        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />

+      </params>

+    </command>

+    <command id='logging print category (0|1)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='print' doc='Log output settings' />

+        <param name='category' doc='Configure log message' />

+        <param name='0' doc='Don&apos;t prefix each log message' />

+        <param name='1' doc='Prefix each log message with category/subsystem name' />

+      </params>

+    </command>

+    <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='level' doc='Set the log level for a specified category' />

+        <param name='all' doc='Global setting for all subsystems' />

+        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />

+        <param name='cc' doc='Layer3 Call Control (CC)' />

+        <param name='mm' doc='Layer3 Mobility Management (MM)' />

+        <param name='rr' doc='Layer3 Radio Resource (RR)' />

+        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />

+        <param name='nm' doc='A-bis Network Management / O&amp;M (NM/OML)' />

+        <param name='mncc' doc='MNCC API for Call Control application' />

+        <param name='pag' doc='Paging Subsystem' />

+        <param name='meas' doc='Radio Measurement Processing' />

+        <param name='sccp' doc='SCCP Protocol' />

+        <param name='msc' doc='Mobile Switching Center' />

+        <param name='mgcp' doc='Media Gateway Control Protocol' />

+        <param name='ho' doc='Hand-Over' />

+        <param name='db' doc='Database Layer' />

+        <param name='ref' doc='Reference Counting' />

+        <param name='gprs' doc='GPRS Packet Service' />

+        <param name='ns' doc='GPRS Network Service (NS)' />

+        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />

+        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />

+        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />

+        <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />

+        <param name='ctrl' doc='Control interface' />

+        <param name='smpp' doc='SMPP interface for external SMS apps' />

+        <param name='filter' doc='BSC/NAT IMSI based filtering' />

+        <param name='ranap' doc='Radio Access Network Application Part Protocol' />

+        <param name='sua' doc='SCCP User Adaptation Protocol' />

+        <param name='pcu' doc='PCU Interface' />

+        <param name='lglobal' doc='Library-internal global log family' />

+        <param name='llapd' doc='LAPD in libosmogsm' />

+        <param name='linp' doc='A-bis Intput Subsystem' />

+        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />

+        <param name='lmi' doc='A-bis Input Driver for Signalling' />

+        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />

+        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />

+        <param name='lctrl' doc='Control Interface' />

+        <param name='lgtp' doc='GPRS GTP library' />

+        <param name='lstats' doc='Statistics messages and logging' />

+        <param name='lgsup' doc='Generic Subscriber Update Protocol' />

+        <param name='loap' doc='Osmocom Authentication Protocol' />

+        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />

+        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />

+        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />

+        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />

+        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />

+        <param name='everything' doc='Don&apos;t use. It doesn&apos;t log anything' />

+        <param name='debug' doc='Log debug messages and higher levels' />

+        <param name='info' doc='Log informational messages and higher levels' />

+        <param name='notice' doc='Log noticeable messages and higher levels' />

+        <param name='error' doc='Log error messages and higher levels' />

+        <param name='fatal' doc='Log only fatal messages' />

+      </params>

+    </command>

+    <command id='logging level sms (everything|debug|info|notice|error|fatal)'>

+      <params>

+        <param name='logging' doc='.HIDDEN' />

+        <param name='level' doc='Obsolete' />

+        <param name='sms' doc='Obsolete' />

+        <param name='everything' doc='Obsolete' />

+        <param name='debug' doc='Obsolete' />

+        <param name='info' doc='Obsolete' />

+        <param name='notice' doc='Obsolete' />

+        <param name='error' doc='Obsolete' />

+        <param name='fatal' doc='Obsolete' />

+      </params>

+    </command>

+    <command id='logging filter imsi IMSI'>

+      <params>

+        <param name='logging' doc='Configure log message to this terminal' />

+        <param name='filter' doc='Filter log messages' />

+        <param name='imsi' doc='Filter log messages by IMSI' />

+        <param name='IMSI' doc='IMSI to be used as filter' />

+      </params>

+    </command>

+  </node>

+  <node id='config-stats'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='local-ip ADDR'>

+      <params>

+        <param name='local-ip' doc='Set the IP address to which we bind locally' />

+        <param name='ADDR' doc='IP Address' />

+      </params>

+    </command>

+    <command id='no local-ip'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='local-ip' doc='Set the IP address to which we bind locally' />

+      </params>

+    </command>

+    <command id='remote-ip ADDR'>

+      <params>

+        <param name='remote-ip' doc='Set the remote IP address to which we connect' />

+        <param name='ADDR' doc='IP Address' />

+      </params>

+    </command>

+    <command id='remote-port &lt;1-65535&gt;'>

+      <params>

+        <param name='remote-port' doc='Set the remote port to which we connect' />

+        <param name='&lt;1-65535&gt;' doc='Remote port number' />

+      </params>

+    </command>

+    <command id='mtu &lt;100-65535&gt;'>

+      <params>

+        <param name='mtu' doc='Set the maximum packet size' />

+        <param name='&lt;100-65535&gt;' doc='Size in byte' />

+      </params>

+    </command>

+    <command id='no mtu'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='mtu' doc='Set the maximum packet size' />

+      </params>

+    </command>

+    <command id='prefix PREFIX'>

+      <params>

+        <param name='prefix' doc='Set the item name prefix' />

+        <param name='PREFIX' doc='The prefix string' />

+      </params>

+    </command>

+    <command id='no prefix'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='prefix' doc='Set the item name prefix' />

+      </params>

+    </command>

+    <command id='level (global|peer|subscriber)'>

+      <params>

+        <param name='level' doc='Set the maximum group level' />

+        <param name='global' doc='Report global groups only' />

+        <param name='peer' doc='Report global and network peer related groups' />

+        <param name='subscriber' doc='Report global, peer, and subscriber groups' />

+      </params>

+    </command>

+    <command id='enable'>

+      <params>

+        <param name='enable' doc='Enable the reporter' />

+      </params>

+    </command>

+    <command id='disable'>

+      <params>

+        <param name='disable' doc='Disable the reporter' />

+      </params>

+    </command>

+  </node>

+  <node id='config-line'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='login'>

+      <params>

+        <param name='login' doc='Enable password checking' />

+      </params>

+    </command>

+    <command id='no login'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='login' doc='Enable password checking' />

+      </params>

+    </command>

+    <command id='bind A.B.C.D'>

+      <params>

+        <param name='bind' doc='Accept VTY telnet connections on local interface' />

+        <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />

+      </params>

+    </command>

+  </node>

+  <node id='config-e1_input'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='e1_line &lt;0-255&gt; driver (misdn|misdn_lapd|dahdi|ipa|unixsocket)'>

+      <params>

+        <param name='e1_line' doc='Configure E1/T1/J1 Line' />

+        <param name='&lt;0-255&gt;' doc='Line Number' />

+        <param name='driver' doc='Set driver for this line' />

+        <param name='misdn' doc='mISDN supported E1 Card (kernel LAPD)' />

+        <param name='misdn_lapd' doc='mISDN supported E1 Card (userspace LAPD)' />

+        <param name='dahdi' doc='DAHDI supported E1/T1/J1 Card' />

+        <param name='ipa' doc='IPA TCP/IP input' />

+        <param name='unixsocket' doc='HSL TCP/IP input' />

+      </params>

+    </command>

+    <command id='e1_line &lt;0-255&gt; port &lt;0-255&gt;'>

+      <params>

+        <param name='e1_line' doc='Configure E1/T1/J1 Line' />

+        <param name='&lt;0-255&gt;' doc='Line Number' />

+        <param name='port' doc='Set physical port/span/card number' />

+        <param name='&lt;0-255&gt;' doc='E1/T1 Port/Span/Card number' />

+      </params>

+    </command>

+    <command id='e1_line &lt;0-255&gt; socket .SOCKET'>

+      <params>

+        <param name='e1_line' doc='Configure E1/T1/J1 Line' />

+        <param name='&lt;0-255&gt;' doc='Line Number' />

+        <param name='socket' doc='Set socket path for unixsocket' />

+        <param name='.SOCKET' doc='socket path' />

+      </params>

+    </command>

+    <command id='e1_line &lt;0-255&gt; name .LINE'>

+      <params>

+        <param name='e1_line' doc='Configure E1/T1/J1 Line' />

+        <param name='&lt;0-255&gt;' doc='Line Number' />

+        <param name='name' doc='Set name for this line' />

+        <param name='.LINE' doc='Human readable name' />

+      </params>

+    </command>

+    <command id='e1_line &lt;0-255&gt; keepalive'>

+      <params>

+        <param name='e1_line' doc='Configure E1/T1/J1 Line' />

+        <param name='&lt;0-255&gt;' doc='Line Number' />

+        <param name='keepalive' doc='Enable keep-alive probing' />

+      </params>

+    </command>

+    <command id='e1_line &lt;0-255&gt; keepalive &lt;1-300&gt; &lt;1-20&gt; &lt;1-300&gt;'>

+      <params>

+        <param name='e1_line' doc='Configure E1/T1/J1 Line' />

+        <param name='&lt;0-255&gt;' doc='Line Number' />

+        <param name='keepalive' doc='Enable keep-alive probing' />

+        <param name='&lt;1-300&gt;' doc='Idle interval in seconds before probes are sent' />

+        <param name='&lt;1-20&gt;' doc='Number of probes to sent' />

+        <param name='&lt;1-300&gt;' doc='Delay between probe packets in seconds' />

+      </params>

+    </command>

+    <command id='no e1_line &lt;0-255&gt; keepalive'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='e1_line' doc='Configure E1/T1/J1 Line' />

+        <param name='&lt;0-255&gt;' doc='Line Number' />

+        <param name='keepalive' doc='Enable keep-alive probing' />

+      </params>

+    </command>

+    <command id='ipa bind A.B.C.D'>

+      <params>

+        <param name='ipa' doc='ipa driver config' />

+        <param name='bind' doc='Set ipa local bind address' />

+        <param name='A.B.C.D' doc='Listen on this IP address (default 0.0.0.0)' />

+      </params>

+    </command>

+  </node>

+  <node id='config-ctrl'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='bind A.B.C.D'>

+      <params>

+        <param name='bind' doc='Set bind address to listen for Control connections' />

+        <param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' />

+      </params>

+    </command>

+  </node>

+  <node id='config-net'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='network country code &lt;1-999&gt;'>

+      <params>

+        <param name='network' doc='Set the GSM network country code' />

+        <param name='country' doc='Country commands' />

+        <param name='code' doc='Code commands' />

+        <param name='&lt;1-999&gt;' doc='Network Country Code to use' />

+      </params>

+    </command>

+    <command id='mobile network code &lt;0-999&gt;'>

+      <params>

+        <param name='mobile' doc='Set the GSM mobile network code' />

+        <param name='network' doc='Network Commands' />

+        <param name='code' doc='Code commands' />

+        <param name='&lt;0-999&gt;' doc='Mobile Network Code to use' />

+      </params>

+    </command>

+    <command id='short name NAME'>

+      <params>

+        <param name='short' doc='Set the short GSM network name' />

+        <param name='name' doc='Name Commands' />

+        <param name='NAME' doc='Name to use' />

+      </params>

+    </command>

+    <command id='long name NAME'>

+      <params>

+        <param name='long' doc='Set the long GSM network name' />

+        <param name='name' doc='Name Commands' />

+        <param name='NAME' doc='Name to use' />

+      </params>

+    </command>

+    <command id='auth policy (closed|accept-all|regexp|token)'>

+      <params>

+        <param name='auth' doc='Authentication (not cryptographic)' />

+        <param name='policy' doc='Set the GSM network authentication policy' />

+        <param name='closed' doc='Require the MS to be activated in HLR' />

+        <param name='accept-all' doc='Accept all MS, whether in HLR or not' />

+        <param name='regexp' doc='Use regular expression for IMSI authorization decision' />

+        <param name='token' doc='Use SMS-token based authentication' />

+      </params>

+    </command>

+    <command id='authorized-regexp REGEXP'>

+      <params>

+        <param name='authorized-regexp' doc='Set regexp for IMSI which will be used for authorization decision' />

+        <param name='REGEXP' doc='Regular expression, IMSIs matching it are allowed to use the network' />

+      </params>

+    </command>

+    <command id='location updating reject cause &lt;2-111&gt;'>

+      <params>

+        <param name='location' doc='Set the reject cause of location updating reject' />

+        <param name='updating' doc='Set the reject cause of location updating reject' />

+        <param name='reject' doc='Set the reject cause of location updating reject' />

+        <param name='cause' doc='Set the reject cause of location updating reject' />

+        <param name='&lt;2-111&gt;' doc='Cause Value as Per GSM TS 04.08' />

+      </params>

+    </command>

+    <command id='encryption a5 (0|1|2|3)'>

+      <params>

+        <param name='encryption' doc='Encryption options' />

+        <param name='a5' doc='A5 encryption' />

+        <param name='0' doc='A5/0: No encryption' />

+        <param name='1' doc='A5/1: Encryption' />

+        <param name='2' doc='A5/2: Export-grade Encryption' />

+        <param name='3' doc='A5/3: &apos;New&apos; Secure Encryption' />

+      </params>

+    </command>

+    <command id='rrlp mode (none|ms-based|ms-preferred|ass-preferred)'>

+      <params>

+        <param name='rrlp' doc='Radio Resource Location Protocol' />

+        <param name='mode' doc='Set the Radio Resource Location Protocol Mode' />

+        <param name='none' doc='Don&apos;t send RRLP request' />

+        <param name='ms-based' doc='Request MS-based location' />

+        <param name='ms-preferred' doc='Request any location, prefer MS-based' />

+        <param name='ass-preferred' doc='Request any location, prefer MS-assisted' />

+      </params>

+    </command>

+    <command id='mm info (0|1)'>

+      <params>

+        <param name='mm' doc='Mobility Management' />

+        <param name='info' doc='Send MM INFO after LOC UPD ACCEPT' />

+        <param name='0' doc='Disable' />

+        <param name='1' doc='Enable' />

+      </params>

+    </command>

+    <command id='subscriber-keep-in-ram (0|1)'>

+      <params>

+        <param name='subscriber-keep-in-ram' doc='Keep unused subscribers in RAM.' />

+        <param name='0' doc='Delete unused subscribers' />

+        <param name='1' doc='Keep unused subscribers' />

+      </params>

+    </command>

+    <command id='timezone &lt;-19-19&gt; (0|15|30|45)'>

+      <params>

+        <param name='timezone' doc='Set the Timezone Offset of the network' />

+        <param name='&lt;-19-19&gt;' doc='Timezone offset (hours)' />

+        <param name='0' doc='Timezone offset (00 minutes)' />

+        <param name='15' doc='Timezone offset (15 minutes)' />

+        <param name='30' doc='Timezone offset (30 minutes)' />

+        <param name='45' doc='Timezone offset (45 minutes)' />

+      </params>

+    </command>

+    <command id='timezone &lt;-19-19&gt; (0|15|30|45) &lt;0-2&gt;'>

+      <params>

+        <param name='timezone' doc='Set the Timezone Offset of the network' />

+        <param name='&lt;-19-19&gt;' doc='Timezone offset (hours)' />

+        <param name='0' doc='Timezone offset (00 minutes)' />

+        <param name='15' doc='Timezone offset (15 minutes)' />

+        <param name='30' doc='Timezone offset (30 minutes)' />

+        <param name='45' doc='Timezone offset (45 minutes)' />

+        <param name='&lt;0-2&gt;' doc='DST offset (hours)' />

+      </params>

+    </command>

+    <command id='no timezone'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='timezone' doc='Disable network timezone override, use system tz' />

+      </params>

+    </command>

+    <command id='dyn_ts_allow_tch_f (0|1)'>

+      <params>

+        <param name='dyn_ts_allow_tch_f' doc='Allow or disallow allocating TCH/F on TCH_F_TCH_H_PDCH timeslots' />

+        <param name='0' doc='Disallow TCH/F on TCH_F_TCH_H_PDCH (default)' />

+        <param name='1' doc='Allow TCH/F on TCH_F_TCH_H_PDCH' />

+      </params>

+    </command>

+    <command id='neci (0|1)'>

+      <params>

+        <param name='neci' doc='New Establish Cause Indication' />

+        <param name='0' doc='Don&apos;t set the NECI bit' />

+        <param name='1' doc='Set the NECI bit' />

+      </params>

+    </command>

+    <command id='handover (0|1)'>

+      <params>

+        <param name='handover' doc='Handover Options' />

+        <param name='0' doc='Don&apos;t perform in-call handover' />

+        <param name='1' doc='Perform in-call handover' />

+      </params>

+    </command>

+    <command id='handover window rxlev averaging &lt;1-10&gt;'>

+      <params>

+        <param name='handover' doc='Handover Options' />

+        <param name='window' doc='Measurement Window' />

+        <param name='rxlev' doc='Received Level Averaging' />

+        <param name='averaging' doc='How many RxLev measurements are used for averaging' />

+        <param name='&lt;1-10&gt;' doc='Amount to use for Averaging' />

+      </params>

+    </command>

+    <command id='handover window rxqual averaging &lt;1-10&gt;'>

+      <params>

+        <param name='handover' doc='Handover Options' />

+        <param name='window' doc='Measurement Window' />

+        <param name='rxqual' doc='Received Quality Averaging' />

+        <param name='averaging' doc='How many RxQual measurements are used for averaging' />

+        <param name='&lt;1-10&gt;' doc='Amount to use for Averaging' />

+      </params>

+    </command>

+    <command id='handover window rxlev neighbor averaging &lt;1-10&gt;'>

+      <params>

+        <param name='handover' doc='Handover Options' />

+        <param name='window' doc='Measurement Window' />

+        <param name='rxlev' doc='Received Level Averaging' />

+        <param name='neighbor' doc='Neighbor' />

+        <param name='averaging' doc='How many RxQual measurements are used for averaging' />

+        <param name='&lt;1-10&gt;' doc='Amount to use for Averaging' />

+      </params>

+    </command>

+    <command id='handover power budget interval &lt;1-99&gt;'>

+      <params>

+        <param name='handover' doc='Handover Options' />

+        <param name='power' doc='Power Budget' />

+        <param name='budget' doc='How often to check if we have a better cell (SACCH frames)' />

+        <param name='interval' doc='Interval' />

+        <param name='&lt;1-99&gt;' doc='Number' />

+      </params>

+    </command>

+    <command id='handover power budget hysteresis &lt;0-999&gt;'>

+      <params>

+        <param name='handover' doc='Handover Options' />

+        <param name='power' doc='Power Budget' />

+        <param name='budget' doc='How many dB does a neighbor to be stronger to become a HO candidate' />

+        <param name='hysteresis' doc='Hysteresis' />

+        <param name='&lt;0-999&gt;' doc='Number' />

+      </params>

+    </command>

+    <command id='handover maximum distance &lt;0-9999&gt;'>

+      <params>

+        <param name='handover' doc='Handover Options' />

+        <param name='maximum' doc='How big is the maximum timing advance before HO is forced' />

+        <param name='distance' doc='Distance' />

+        <param name='&lt;0-9999&gt;' doc='Number' />

+      </params>

+    </command>

+    <command id='timer t3101 (default|&lt;1-65535&gt;)'>

+      <params>

+        <param name='timer' doc='Configure GSM Timers' />

+        <param name='t3101' doc='Set the timeout value for IMMEDIATE ASSIGNMENT (default: 10 seconds)' />

+        <param name='default' doc='Set to default timer value (10 seconds)' />

+        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />

+      </params>

+    </command>

+    <command id='timer t3103 (default|&lt;1-65535&gt;)'>

+      <params>

+        <param name='timer' doc='Configure GSM Timers' />

+        <param name='t3103' doc='Set the timeout value for HANDOVER (default: 5 seconds)' />

+        <param name='default' doc='Set to default timer value (5 seconds)' />

+        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />

+      </params>

+    </command>

+    <command id='timer t3105 (default|&lt;1-65535&gt;)'>

+      <params>

+        <param name='timer' doc='Configure GSM Timers' />

+        <param name='t3105' doc='Set the timer for repetition of PHYSICAL INFORMATION (default: 100 seconds)' />

+        <param name='default' doc='Set to default timer value (100 seconds)' />

+        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />

+      </params>

+    </command>

+    <command id='timer t3107 (default|&lt;1-65535&gt;)'>

+      <params>

+        <param name='timer' doc='Configure GSM Timers' />

+        <param name='t3107' doc='Currently not used (default: 5 seconds)' />

+        <param name='default' doc='Set to default timer value (5 seconds)' />

+        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />

+      </params>

+    </command>

+    <command id='timer t3109 (default|&lt;1-65535&gt;)'>

+      <params>

+        <param name='timer' doc='Configure GSM Timers' />

+        <param name='t3109' doc='Set the RSL SACCH deactivation timeout (default: 19 seconds)' />

+        <param name='default' doc='Set to default timer value (19 seconds)' />

+        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />

+      </params>

+    </command>

+    <command id='timer t3111 (default|&lt;1-65535&gt;)'>

+      <params>

+        <param name='timer' doc='Configure GSM Timers' />

+        <param name='t3111' doc='Set the RSL timeout to wait before releasing the RF Channel (default: 2 seconds)' />

+        <param name='default' doc='Set to default timer value (2 seconds)' />

+        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />

+      </params>

+    </command>

+    <command id='timer t3113 (default|&lt;1-65535&gt;)'>

+      <params>

+        <param name='timer' doc='Configure GSM Timers' />

+        <param name='t3113' doc='Set the time to try paging a subscriber (default: 60 seconds)' />

+        <param name='default' doc='Set to default timer value (60 seconds)' />

+        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />

+      </params>

+    </command>

+    <command id='timer t3115 (default|&lt;1-65535&gt;)'>

+      <params>

+        <param name='timer' doc='Configure GSM Timers' />

+        <param name='t3115' doc='Currently not used (default: 10 seconds)' />

+        <param name='default' doc='Set to default timer value (10 seconds)' />

+        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />

+      </params>

+    </command>

+    <command id='timer t3117 (default|&lt;1-65535&gt;)'>

+      <params>

+        <param name='timer' doc='Configure GSM Timers' />

+        <param name='t3117' doc='Currently not used (default: 10 seconds)' />

+        <param name='default' doc='Set to default timer value (10 seconds)' />

+        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />

+      </params>

+    </command>

+    <command id='timer t3119 (default|&lt;1-65535&gt;)'>

+      <params>

+        <param name='timer' doc='Configure GSM Timers' />

+        <param name='t3119' doc='Currently not used (default: 10 seconds)' />

+        <param name='default' doc='Set to default timer value (10 seconds)' />

+        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />

+      </params>

+    </command>

+    <command id='timer t3122 (default|&lt;1-65535&gt;)'>

+      <params>

+        <param name='timer' doc='Configure GSM Timers' />

+        <param name='t3122' doc='Waiting time (seconds) after IMM ASS REJECT (default: 10 seconds)' />

+        <param name='default' doc='Set to default timer value (10 seconds)' />

+        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />

+      </params>

+    </command>

+    <command id='timer t3141 (default|&lt;1-65535&gt;)'>

+      <params>

+        <param name='timer' doc='Configure GSM Timers' />

+        <param name='t3141' doc='Currently not used (default: 10 seconds)' />

+        <param name='default' doc='Set to default timer value (10 seconds)' />

+        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />

+      </params>

+    </command>

+    <command id='dtx-used (0|1)'>

+      <params>

+        <param name='dtx-used' doc='.HIDDEN' />

+        <param name='0' doc='Obsolete' />

+        <param name='1' doc='Obsolete' />

+      </params>

+    </command>

+    <command id='paging any use tch (0|1)'>

+      <params>

+        <param name='paging' doc='Assign a TCH when receiving a Paging Any request' />

+        <param name='any' doc='Any Channel' />

+        <param name='use' doc='Use' />

+        <param name='tch' doc='TCH' />

+        <param name='0' doc='Do not use TCH for Paging Request Any' />

+        <param name='1' doc='Do use TCH for Paging Request Any' />

+      </params>

+    </command>

+    <command id='bts &lt;0-255&gt;'>

+      <params>

+        <param name='bts' doc='Select a BTS to configure' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+      </params>

+    </command>

+  </node>

+  <node id='config-net-bts'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='type (unknown|bs11|nanobts|rbs2000|nokia_site|sysmobts)'>

+      <params>

+        <param name='type' doc='BTS Vendor/Type' />

+        <param name='unknown' doc='Unknown BTS Type' />

+        <param name='bs11' doc='Siemens BTS (BS-11 or compatible)' />

+        <param name='nanobts' doc='ip.access nanoBTS or compatible' />

+        <param name='rbs2000' doc='Ericsson RBS2000 Series' />

+        <param name='nokia_site' doc='Nokia {Metro,Ultra,In}Site' />

+        <param name='sysmobts' doc='sysmocom sysmoBTS' />

+      </params>

+    </command>

+    <command id='description .TEXT'>

+      <params>

+        <param name='description' doc='Save human-readable description of the object' />

+        <param name='.TEXT' doc='Text until the end of the line' />

+      </params>

+    </command>

+    <command id='no description'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='description' doc='Remove description of the object' />

+      </params>

+    </command>

+    <command id='band BAND'>

+      <params>

+        <param name='band' doc='Set the frequency band of this BTS' />

+        <param name='BAND' doc='Frequency band' />

+      </params>

+    </command>

+    <command id='cell_identity &lt;0-65535&gt;'>

+      <params>

+        <param name='cell_identity' doc='Set the Cell identity of this BTS' />

+        <param name='&lt;0-65535&gt;' doc='Cell Identity' />

+      </params>

+    </command>

+    <command id='dtx uplink [force]'>

+      <params>

+        <param name='dtx' doc='Configure discontinuous transmission' />

+        <param name='uplink' doc='Enable Uplink DTX for this BTS' />

+        <param name='[force]' doc='MS &apos;shall&apos; use DTXu instead of &apos;may&apos; use (might not be supported by older phones).' />

+      </params>

+    </command>

+    <command id='dtx downlink'>

+      <params>

+        <param name='dtx' doc='Configure discontinuous transmission' />

+        <param name='downlink' doc='Enable Downlink DTX for this BTS' />

+      </params>

+    </command>

+    <command id='no dtx uplink'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='dtx' doc='Configure discontinuous transmission' />

+        <param name='uplink' doc='Disable Uplink DTX for this BTS' />

+      </params>

+    </command>

+    <command id='no dtx downlink'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='dtx' doc='Configure discontinuous transmission' />

+        <param name='downlink' doc='Disable Downlink DTX for this BTS' />

+      </params>

+    </command>

+    <command id='location_area_code &lt;0-65535&gt;'>

+      <params>

+        <param name='location_area_code' doc='Set the Location Area Code (LAC) of this BTS' />

+        <param name='&lt;0-65535&gt;' doc='LAC' />

+      </params>

+    </command>

+    <command id='training_sequence_code &lt;0-7&gt;'>

+      <params>

+        <param name='training_sequence_code' doc='Set the Training Sequence Code (TSC) of this BTS' />

+        <param name='&lt;0-7&gt;' doc='TSC' />

+      </params>

+    </command>

+    <command id='base_station_id_code &lt;0-63&gt;'>

+      <params>

+        <param name='base_station_id_code' doc='Set the Base Station Identity Code (BSIC) of this BTS' />

+        <param name='&lt;0-63&gt;' doc='BSIC of this BTS' />

+      </params>

+    </command>

+    <command id='ip.access unit_id &lt;0-65534&gt; &lt;0-255&gt;'>

+      <params>

+        <param name='ip.access' doc='Abis/IP specific options' />

+        <param name='unit_id' doc='Set the IPA BTS Unit ID' />

+        <param name='&lt;0-65534&gt;' doc='Unit ID (Site)' />

+        <param name='&lt;0-255&gt;' doc='Unit ID (BTS)' />

+      </params>

+    </command>

+    <command id='ip.access rsl-ip A.B.C.D'>

+      <params>

+        <param name='ip.access' doc='Abis/IP specific options' />

+        <param name='rsl-ip' doc='Set the IPA RSL IP Address of the BSC' />

+        <param name='A.B.C.D' doc='Destination IP address for RSL connection' />

+      </params>

+    </command>

+    <command id='nokia_site skip-reset (0|1)'>

+      <params>

+        <param name='nokia_site' doc='Nokia *Site related commands' />

+        <param name='skip-reset' doc='Skip the reset step during bootstrap process of this BTS' />

+        <param name='0' doc='Do NOT skip the reset' />

+        <param name='1' doc='Skip the reset' />

+      </params>

+    </command>

+    <command id='nokia_site no-local-rel-conf (0|1)'>

+      <params>

+        <param name='nokia_site' doc='Nokia *Site related commands' />

+        <param name='no-local-rel-conf' doc='Do not wait for RELease CONFirm message when releasing channel locally' />

+        <param name='0' doc='Wait for RELease CONFirm' />

+        <param name='1' doc='Do not wait for RELease CONFirm' />

+      </params>

+    </command>

+    <command id='nokia_site bts-reset-timer  &lt;15-100&gt;'>

+      <params>

+        <param name='nokia_site' doc='Nokia *Site related commands' />

+        <param name='bts-reset-timer' doc='The amount of time (in sec.) between BTS_RESET is sent,' />

+        <param name='&lt;15-100&gt;' doc='and the BTS is being bootstrapped.' />

+      </params>

+    </command>

+    <command id='oml ip.access stream_id &lt;0-255&gt; line E1_LINE'>

+      <params>

+        <param name='oml' doc='Organization &amp; Maintenance Link' />

+        <param name='ip.access' doc='A-bis/IP Specific Options' />

+        <param name='stream_id' doc='Set the ip.access Stream ID of the OML link of this BTS' />

+        <param name='&lt;0-255&gt;' doc='Stream Identifier' />

+        <param name='line' doc='Virtual E1 Line Number' />

+        <param name='E1_LINE' doc='Virtual E1 Line Number' />

+      </params>

+    </command>

+    <command id='oml e1 line E1_LINE timeslot &lt;1-31&gt; sub-slot (0|1|2|3|full)'>

+      <params>

+        <param name='oml' doc='Organization &amp; Maintenance Link' />

+        <param name='e1' doc='OML E1/T1 Configuration' />

+        <param name='line' doc='E1/T1 line number to be used for OML' />

+        <param name='E1_LINE' doc='E1/T1 line number to be used for OML' />

+        <param name='timeslot' doc='E1/T1 timeslot to be used for OML' />

+        <param name='&lt;1-31&gt;' doc='E1/T1 timeslot to be used for OML' />

+        <param name='sub-slot' doc='E1/T1 sub-slot to be used for OML' />

+        <param name='0' doc='Use E1/T1 sub-slot 0' />

+        <param name='1' doc='Use E1/T1 sub-slot 1' />

+        <param name='2' doc='Use E1/T1 sub-slot 2' />

+        <param name='3' doc='Use E1/T1 sub-slot 3' />

+        <param name='full' doc='Use full E1 slot 3' />

+      </params>

+    </command>

+    <command id='oml e1 tei &lt;0-63&gt;'>

+      <params>

+        <param name='oml' doc='Organization &amp; Maintenance Link' />

+        <param name='e1' doc='OML E1/T1 Configuration' />

+        <param name='tei' doc='Set the TEI to be used for OML' />

+        <param name='&lt;0-63&gt;' doc='TEI Number' />

+      </params>

+    </command>

+    <command id='channel allocator (ascending|descending)'>

+      <params>

+        <param name='channel' doc='Channnel Allocator' />

+        <param name='allocator' doc='Channel Allocator' />

+        <param name='ascending' doc='Allocate Timeslots and Transceivers in ascending order' />

+        <param name='descending' doc='Allocate Timeslots and Transceivers in descending order' />

+      </params>

+    </command>

+    <command id='rach tx integer &lt;0-15&gt;'>

+      <params>

+        <param name='rach' doc='Random Access Control Channel' />

+        <param name='tx' doc='Set the raw tx integer value in RACH Control parameters IE' />

+        <param name='integer' doc='Set the raw tx integer value in RACH Control parameters IE' />

+        <param name='&lt;0-15&gt;' doc='Raw tx integer value in RACH Control parameters IE' />

+      </params>

+    </command>

+    <command id='rach max transmission (1|2|4|7)'>

+      <params>

+        <param name='rach' doc='Random Access Control Channel' />

+        <param name='max' doc='Set the maximum number of RACH burst transmissions' />

+        <param name='transmission' doc='Set the maximum number of RACH burst transmissions' />

+        <param name='1' doc='Maximum number of 1 RACH burst transmissions' />

+        <param name='2' doc='Maximum number of 2 RACH burst transmissions' />

+        <param name='4' doc='Maximum number of 4 RACH burst transmissions' />

+        <param name='7' doc='Maximum number of 7 RACH burst transmissions' />

+      </params>

+    </command>

+    <command id='channel-descrption attach (0|1)'>

+      <params>

+        <param name='channel-descrption' doc='Channel Description' />

+        <param name='attach' doc='Set if attachment is required' />

+        <param name='0' doc='Attachment is NOT required' />

+        <param name='1' doc='Attachment is required (standard)' />

+      </params>

+    </command>

+    <command id='channel-descrption bs-pa-mfrms &lt;2-9&gt;'>

+      <params>

+        <param name='channel-descrption' doc='Channel Description' />

+        <param name='bs-pa-mfrms' doc='Set number of multiframe periods for paging groups' />

+        <param name='&lt;2-9&gt;' doc='Number of multiframe periods for paging groups' />

+      </params>

+    </command>

+    <command id='channel-descrption bs-ag-blks-res &lt;0-7&gt;'>

+      <params>

+        <param name='channel-descrption' doc='Channel Description' />

+        <param name='bs-ag-blks-res' doc='Set number of blocks reserved for access grant' />

+        <param name='&lt;0-7&gt;' doc='Number of blocks reserved for access grant' />

+      </params>

+    </command>

+    <command id='rach nm busy threshold &lt;0-255&gt;'>

+      <params>

+        <param name='rach' doc='Random Access Control Channel' />

+        <param name='nm' doc='Network Management' />

+        <param name='busy' doc='Set the NM Busy Threshold' />

+        <param name='threshold' doc='Set the NM Busy Threshold' />

+        <param name='&lt;0-255&gt;' doc='NM Busy Threshold in dB' />

+      </params>

+    </command>

+    <command id='rach nm load average &lt;0-65535&gt;'>

+      <params>

+        <param name='rach' doc='Random Access Control Channel' />

+        <param name='nm' doc='Network Management' />

+        <param name='load' doc='Set the NM Loadaverage Slots value' />

+        <param name='average' doc='Set the NM Loadaverage Slots value' />

+        <param name='&lt;0-65535&gt;' doc='NM Loadaverage Slots value' />

+      </params>

+    </command>

+    <command id='cell barred (0|1)'>

+      <params>

+        <param name='cell' doc='Should this cell be barred from access?' />

+        <param name='barred' doc='Should this cell be barred from access?' />

+        <param name='0' doc='Cell should NOT be barred' />

+        <param name='1' doc='Cell should be barred' />

+      </params>

+    </command>

+    <command id='rach emergency call allowed (0|1)'>

+      <params>

+        <param name='rach' doc='Random Access Control Channel' />

+        <param name='emergency' doc='Should this cell allow emergency calls?' />

+        <param name='call' doc='Should this cell allow emergency calls?' />

+        <param name='allowed' doc='Should this cell allow emergency calls?' />

+        <param name='0' doc='Do NOT allow emergency calls' />

+        <param name='1' doc='Allow emergency calls' />

+      </params>

+    </command>

+    <command id='rach access-control-class (0|1|2|3|4|5|6|7|8|9|11|12|13|14|15) (barred|allowed)'>

+      <params>

+        <param name='rach' doc='Random Access Control Channel' />

+        <param name='access-control-class' doc='Set access control class' />

+        <param name='0' doc='Access control class 0' />

+        <param name='1' doc='Access control class 1' />

+        <param name='2' doc='Access control class 2' />

+        <param name='3' doc='Access control class 3' />

+        <param name='4' doc='Access control class 4' />

+        <param name='5' doc='Access control class 5' />

+        <param name='6' doc='Access control class 6' />

+        <param name='7' doc='Access control class 7' />

+        <param name='8' doc='Access control class 8' />

+        <param name='9' doc='Access control class 9' />

+        <param name='11' doc='Access control class 11 for PLMN use' />

+        <param name='12' doc='Access control class 12 for security services' />

+        <param name='13' doc='Access control class 13 for public utilities (e.g. water/gas suppliers)' />

+        <param name='14' doc='Access control class 14 for emergency services' />

+        <param name='15' doc='Access control class 15 for PLMN staff' />

+        <param name='barred' doc='barred to use access control class' />

+        <param name='allowed' doc='allowed to use access control class' />

+      </params>

+    </command>

+    <command id='ms max power &lt;0-40&gt;'>

+      <params>

+        <param name='ms' doc='MS Options' />

+        <param name='max' doc='Maximum transmit power of the MS' />

+        <param name='power' doc='Maximum transmit power of the MS' />

+        <param name='&lt;0-40&gt;' doc='Maximum transmit power of the MS in dBm' />

+      </params>

+    </command>

+    <command id='periodic location update &lt;6-1530&gt;'>

+      <params>

+        <param name='periodic' doc='Periodic Location Updating Interval' />

+        <param name='location' doc='Periodic Location Updating Interval' />

+        <param name='update' doc='Periodic Location Updating Interval' />

+        <param name='&lt;6-1530&gt;' doc='Periodic Location Updating Interval in Minutes' />

+      </params>

+    </command>

+    <command id='no periodic location update'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='periodic' doc='Periodic Location Updating Interval' />

+        <param name='location' doc='Periodic Location Updating Interval' />

+        <param name='update' doc='Periodic Location Updating Interval' />

+      </params>

+    </command>

+    <command id='cell reselection hysteresis &lt;0-14&gt;'>

+      <params>

+        <param name='cell' doc='Cell Parameters' />

+        <param name='reselection' doc='Cell re-selection parameters' />

+        <param name='hysteresis' doc='Cell Re-Selection Hysteresis in dB' />

+        <param name='&lt;0-14&gt;' doc='Cell Re-Selection Hysteresis in dB' />

+      </params>

+    </command>

+    <command id='rxlev access min &lt;0-63&gt;'>

+      <params>

+        <param name='rxlev' doc='Minimum RxLev needed for cell access' />

+        <param name='access' doc='Minimum RxLev needed for cell access' />

+        <param name='min' doc='Minimum RxLev needed for cell access' />

+        <param name='&lt;0-63&gt;' doc='Minimum RxLev needed for cell access (better than -110dBm)' />

+      </params>

+    </command>

+    <command id='cell bar qualify (0|1)'>

+      <params>

+        <param name='cell' doc='Cell Parameters' />

+        <param name='bar' doc='Cell Bar Qualify' />

+        <param name='qualify' doc='Cell Bar Qualify' />

+        <param name='0' doc='Set CBQ to 0' />

+        <param name='1' doc='Set CBQ to 1' />

+      </params>

+    </command>

+    <command id='cell reselection offset &lt;0-126&gt;'>

+      <params>

+        <param name='cell' doc='Cell Parameters' />

+        <param name='reselection' doc='Cell Re-Selection Parameters' />

+        <param name='offset' doc='Cell Re-Selection Offset (CRO) in dB' />

+        <param name='&lt;0-126&gt;' doc='Cell Re-Selection Offset (CRO) in dB' />

+      </params>

+    </command>

+    <command id='temporary offset &lt;0-60&gt;'>

+      <params>

+        <param name='temporary' doc='Cell selection temporary negative offset' />

+        <param name='offset' doc='Cell selection temporary negative offset' />

+        <param name='&lt;0-60&gt;' doc='Cell selection temporary negative offset in dB' />

+      </params>

+    </command>

+    <command id='temporary offset infinite'>

+      <params>

+        <param name='temporary' doc='Cell selection temporary negative offset' />

+        <param name='offset' doc='Cell selection temporary negative offset' />

+        <param name='infinite' doc='Sets cell selection temporary negative offset to infinity' />

+      </params>

+    </command>

+    <command id='penalty time &lt;20-620&gt;'>

+      <params>

+        <param name='penalty' doc='Cell selection penalty time' />

+        <param name='time' doc='Cell selection penalty time' />

+        <param name='&lt;20-620&gt;' doc='Cell selection penalty time in seconds (by 20s increments)' />

+      </params>

+    </command>

+    <command id='penalty time reserved'>

+      <params>

+        <param name='penalty' doc='Cell selection penalty time' />

+        <param name='time' doc='Cell selection penalty time' />

+        <param name='reserved' doc='Set cell selection penalty time to reserved value 31, (indicate that CELL_RESELECT_OFFSET is subtracted from C2 and TEMPORARY_OFFSET is ignored)' />

+      </params>

+    </command>

+    <command id='radio-link-timeout &lt;4-64&gt;'>

+      <params>

+        <param name='radio-link-timeout' doc='Radio link timeout criterion (BTS side)' />

+        <param name='&lt;4-64&gt;' doc='Radio link timeout value (lost SACCH block)' />

+      </params>

+    </command>

+    <command id='radio-link-timeout infinite'>

+      <params>

+        <param name='radio-link-timeout' doc='Radio link timeout criterion (BTS side)' />

+        <param name='infinite' doc='Infinite Radio link timeout value (use only for BTS RF testing)' />

+      </params>

+    </command>

+    <command id='gprs mode (none|gprs|egprs)'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='mode' doc='GPRS Mode for this BTS' />

+        <param name='none' doc='GPRS Disabled on this BTS' />

+        <param name='gprs' doc='GPRS Enabled on this BTS' />

+        <param name='egprs' doc='EGPRS (EDGE) Enabled on this BTS' />

+      </params>

+    </command>

+    <command id='gprs 11bit_rach_support_for_egprs (0|1)'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='11bit_rach_support_for_egprs' doc='11 bit RACH options' />

+        <param name='0' doc='Disable 11 bit RACH for EGPRS' />

+        <param name='1' doc='Enable 11 bit RACH for EGPRS' />

+      </params>

+    </command>

+    <command id='gprs ns timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries) &lt;0-255&gt;'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='ns' doc='Network Service' />

+        <param name='timer' doc='Network Service Timer' />

+        <param name='tns-block' doc='(un)blocking Timer (Tns-block) timeout' />

+        <param name='tns-block-retries' doc='(un)blocking Timer (Tns-block) number of retries' />

+        <param name='tns-reset' doc='Reset Timer (Tns-reset) timeout' />

+        <param name='tns-reset-retries' doc='Reset Timer (Tns-reset) number of retries' />

+        <param name='tns-test' doc='Test Timer (Tns-test) timeout' />

+        <param name='tns-alive' doc='Alive Timer (Tns-alive) timeout' />

+        <param name='tns-alive-retries' doc='Alive Timer (Tns-alive) number of retries' />

+        <param name='&lt;0-255&gt;' doc='Timer Value' />

+      </params>

+    </command>

+    <command id='gprs routing area &lt;0-255&gt;'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='routing' doc='GPRS Routing Area Code' />

+        <param name='area' doc='GPRS Routing Area Code' />

+        <param name='&lt;0-255&gt;' doc='GPRS Routing Area Code' />

+      </params>

+    </command>

+    <command id='gprs network-control-order (nc0|nc1|nc2)'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='network-control-order' doc='GPRS Network Control Order' />

+        <param name='nc0' doc='MS controlled cell re-selection, no measurement reporting' />

+        <param name='nc1' doc='MS controlled cell re-selection, MS sends measurement reports' />

+        <param name='nc2' doc='Network controlled cell re-selection, MS sends measurement reports' />

+      </params>

+    </command>

+    <command id='gprs control-ack-type-rach'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='control-ack-type-rach' doc='Set GPRS Control Ack Type for PACKET CONTROL ACKNOWLEDGMENT message to four access bursts format instead of default RLC/MAC control block' />

+      </params>

+    </command>

+    <command id='no gprs control-ack-type-rach'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='control-ack-type-rach' doc='Set GPRS Control Ack Type for PACKET CONTROL ACKNOWLEDGMENT message to four access bursts format instead of default RLC/MAC control block' />

+      </params>

+    </command>

+    <command id='gprs cell bvci &lt;2-65535&gt;'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='cell' doc='GPRS Cell Settings' />

+        <param name='bvci' doc='GPRS BSSGP VC Identifier' />

+        <param name='&lt;2-65535&gt;' doc='GPRS BSSGP VC Identifier' />

+      </params>

+    </command>

+    <command id='gprs cell timer (blocking-timer|blocking-retries|unblocking-retries|reset-timer|reset-retries|suspend-timer|suspend-retries|resume-timer|resume-retries|capability-update-timer|capability-update-retries) &lt;0-255&gt;'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='cell' doc='Cell / BSSGP' />

+        <param name='timer' doc='Cell/BSSGP Timer' />

+        <param name='blocking-timer' doc='Tbvc-block timeout' />

+        <param name='blocking-retries' doc='Tbvc-block retries' />

+        <param name='unblocking-retries' doc='Tbvc-unblock retries' />

+        <param name='reset-timer' doc='Tbvcc-reset timeout' />

+        <param name='reset-retries' doc='Tbvc-reset retries' />

+        <param name='suspend-timer' doc='Tbvc-suspend timeout' />

+        <param name='suspend-retries' doc='Tbvc-suspend retries' />

+        <param name='resume-timer' doc='Tbvc-resume timeout' />

+        <param name='resume-retries' doc='Tbvc-resume retries' />

+        <param name='capability-update-timer' doc='Tbvc-capa-update timeout' />

+        <param name='capability-update-retries' doc='Tbvc-capa-update retries' />

+        <param name='&lt;0-255&gt;' doc='Timer Value' />

+      </params>

+    </command>

+    <command id='gprs nsei &lt;0-65535&gt;'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='nsei' doc='GPRS NS Entity Identifier' />

+        <param name='&lt;0-65535&gt;' doc='GPRS NS Entity Identifier' />

+      </params>

+    </command>

+    <command id='gprs nsvc &lt;0-1&gt; nsvci &lt;0-65535&gt;'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' />

+        <param name='&lt;0-1&gt;' doc='NSVC Logical Number' />

+        <param name='nsvci' doc='NS Virtual Connection Identifier' />

+        <param name='&lt;0-65535&gt;' doc='GPRS NS VC Identifier' />

+      </params>

+    </command>

+    <command id='gprs nsvc &lt;0-1&gt; local udp port &lt;0-65535&gt;'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' />

+        <param name='&lt;0-1&gt;' doc='NSVC Logical Number' />

+        <param name='local' doc='GPRS NS Local UDP Port' />

+        <param name='udp' doc='GPRS NS Local UDP Port' />

+        <param name='port' doc='GPRS NS Local UDP Port' />

+        <param name='&lt;0-65535&gt;' doc='GPRS NS Local UDP Port Number' />

+      </params>

+    </command>

+    <command id='gprs nsvc &lt;0-1&gt; remote udp port &lt;0-65535&gt;'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' />

+        <param name='&lt;0-1&gt;' doc='NSVC Logical Number' />

+        <param name='remote' doc='GPRS NS Remote UDP Port' />

+        <param name='udp' doc='GPRS NS Remote UDP Port' />

+        <param name='port' doc='GPRS NS Remote UDP Port' />

+        <param name='&lt;0-65535&gt;' doc='GPRS NS Remote UDP Port Number' />

+      </params>

+    </command>

+    <command id='gprs nsvc &lt;0-1&gt; remote ip A.B.C.D'>

+      <params>

+        <param name='gprs' doc='GPRS Packet Network' />

+        <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' />

+        <param name='&lt;0-1&gt;' doc='NSVC Logical Number' />

+        <param name='remote' doc='GPRS NS Remote IP Address' />

+        <param name='ip' doc='GPRS NS Remote IP Address' />

+        <param name='A.B.C.D' doc='GPRS NS Remote IP Address' />

+      </params>

+    </command>

+    <command id='paging free &lt;-1-1024&gt;'>

+      <params>

+        <param name='paging' doc='Paging options' />

+        <param name='free' doc='Only page when having a certain amount of free slots' />

+        <param name='&lt;-1-1024&gt;' doc='amount of required free paging slots. -1 to disable' />

+      </params>

+    </command>

+    <command id='system-information (1|2|3|4|5|6|7|8|9|10|13|16|17|18|19|20|2bis|2ter|2quater|5bis|5ter) mode (static|computed)'>

+      <params>

+        <param name='system-information' doc='System Information Messages' />

+        <param name='1' doc='System Information Type 1' />

+        <param name='2' doc='System Information Type 2' />

+        <param name='3' doc='System Information Type 3' />

+        <param name='4' doc='System Information Type 4' />

+        <param name='5' doc='System Information Type 5' />

+        <param name='6' doc='System Information Type 6' />

+        <param name='7' doc='System Information Type 7' />

+        <param name='8' doc='System Information Type 8' />

+        <param name='9' doc='System Information Type 9' />

+        <param name='10' doc='System Information Type 10' />

+        <param name='13' doc='System Information Type 13' />

+        <param name='16' doc='System Information Type 16' />

+        <param name='17' doc='System Information Type 17' />

+        <param name='18' doc='System Information Type 18' />

+        <param name='19' doc='System Information Type 19' />

+        <param name='20' doc='System Information Type 20' />

+        <param name='2bis' doc='System Information Type 2bis' />

+        <param name='2ter' doc='System Information Type 2ter' />

+        <param name='2quater' doc='System Information Type 2quater' />

+        <param name='5bis' doc='System Information Type 5bis' />

+        <param name='5ter' doc='System Information Type 5ter' />

+        <param name='mode' doc='System Information Mode' />

+        <param name='static' doc='Static user-specified' />

+        <param name='computed' doc='Dynamic, BSC-computed' />

+      </params>

+    </command>

+    <command id='system-information (1|2|3|4|5|6|7|8|9|10|13|16|17|18|19|20|2bis|2ter|2quater|5bis|5ter) static HEXSTRING'>

+      <params>

+        <param name='system-information' doc='System Information Messages' />

+        <param name='1' doc='System Information Type 1' />

+        <param name='2' doc='System Information Type 2' />

+        <param name='3' doc='System Information Type 3' />

+        <param name='4' doc='System Information Type 4' />

+        <param name='5' doc='System Information Type 5' />

+        <param name='6' doc='System Information Type 6' />

+        <param name='7' doc='System Information Type 7' />

+        <param name='8' doc='System Information Type 8' />

+        <param name='9' doc='System Information Type 9' />

+        <param name='10' doc='System Information Type 10' />

+        <param name='13' doc='System Information Type 13' />

+        <param name='16' doc='System Information Type 16' />

+        <param name='17' doc='System Information Type 17' />

+        <param name='18' doc='System Information Type 18' />

+        <param name='19' doc='System Information Type 19' />

+        <param name='20' doc='System Information Type 20' />

+        <param name='2bis' doc='System Information Type 2bis' />

+        <param name='2ter' doc='System Information Type 2ter' />

+        <param name='2quater' doc='System Information Type 2quater' />

+        <param name='5bis' doc='System Information Type 5bis' />

+        <param name='5ter' doc='System Information Type 5ter' />

+        <param name='static' doc='Static System Information filling' />

+        <param name='HEXSTRING' doc='Static user-specified SI content in HEX notation' />

+      </params>

+    </command>

+    <command id='early-classmark-sending (allowed|forbidden)'>

+      <params>

+        <param name='early-classmark-sending' doc='Early Classmark Sending' />

+        <param name='allowed' doc='Early Classmark Sending is allowed' />

+        <param name='forbidden' doc='Early Classmark Sending is forbidden' />

+      </params>

+    </command>

+    <command id='neighbor-list mode (automatic|manual|manual-si5)'>

+      <params>

+        <param name='neighbor-list' doc='Neighbor List' />

+        <param name='mode' doc='Mode of Neighbor List generation' />

+        <param name='automatic' doc='Automatically from all BTS in this OpenBSC' />

+        <param name='manual' doc='Manual' />

+        <param name='manual-si5' doc='Manual with different lists for SI2 and SI5' />

+      </params>

+    </command>

+    <command id='neighbor-list (add|del) arfcn &lt;0-1023&gt;'>

+      <params>

+        <param name='neighbor-list' doc='Neighbor List' />

+        <param name='add' doc='Add to manual neighbor list' />

+        <param name='del' doc='Delete from manual neighbor list' />

+        <param name='arfcn' doc='ARFCN of neighbor' />

+        <param name='&lt;0-1023&gt;' doc='ARFCN of neighbor' />

+      </params>

+    </command>

+    <command id='si5 neighbor-list (add|del) arfcn &lt;0-1023&gt;'>

+      <params>

+        <param name='si5' doc='SI5 Neighbor List' />

+        <param name='neighbor-list' doc='SI5 Neighbor List' />

+        <param name='add' doc='Add to manual SI5 neighbor list' />

+        <param name='del' doc='Delete from SI5 manual neighbor list' />

+        <param name='arfcn' doc='ARFCN of neighbor' />

+        <param name='&lt;0-1023&gt;' doc='ARFCN of neighbor' />

+      </params>

+    </command>

+    <command id='si2quater neighbor-list add earfcn &lt;0-65535&gt; thresh-hi &lt;0-31&gt; thresh-lo &lt;0-32&gt; prio &lt;0-8&gt; qrxlv &lt;0-32&gt; meas &lt;0-8&gt;'>

+      <params>

+        <param name='si2quater' doc='SI2quater Neighbor List' />

+        <param name='neighbor-list' doc='SI2quater Neighbor List' />

+        <param name='add' doc='Add to manual SI2quater neighbor list' />

+        <param name='earfcn' doc='EARFCN of neighbor' />

+        <param name='&lt;0-65535&gt;' doc='EARFCN of neighbor' />

+        <param name='thresh-hi' doc='threshold high bits' />

+        <param name='&lt;0-31&gt;' doc='threshold high bits' />

+        <param name='thresh-lo' doc='threshold low bits' />

+        <param name='&lt;0-32&gt;' doc='threshold low bits (32 means NA)' />

+        <param name='prio' doc='priority' />

+        <param name='&lt;0-8&gt;' doc='priority (8 means NA)' />

+        <param name='qrxlv' doc='QRXLEVMIN' />

+        <param name='&lt;0-32&gt;' doc='QRXLEVMIN (32 means NA)' />

+        <param name='meas' doc='measurement bandwidth' />

+        <param name='&lt;0-8&gt;' doc='measurement bandwidth (8 means NA)' />

+      </params>

+    </command>

+    <command id='si2quater neighbor-list del earfcn &lt;0-65535&gt;'>

+      <params>

+        <param name='si2quater' doc='SI2quater Neighbor List' />

+        <param name='neighbor-list' doc='SI2quater Neighbor List' />

+        <param name='del' doc='Delete from SI2quater manual neighbor list' />

+        <param name='earfcn' doc='EARFCN of neighbor' />

+        <param name='&lt;0-65535&gt;' doc='EARFCN' />

+      </params>

+    </command>

+    <command id='si2quater neighbor-list add uarfcn &lt;0-16383&gt; &lt;0-511&gt; &lt;0-1&gt;'>

+      <params>

+        <param name='si2quater' doc='SI2quater Neighbor List' />

+        <param name='neighbor-list' doc='SI2quater Neighbor List' />

+        <param name='add' doc='Add to manual SI2quater neighbor list' />

+        <param name='uarfcn' doc='UARFCN of neighbor' />

+        <param name='&lt;0-16383&gt;' doc='UARFCN of neighbor' />

+        <param name='&lt;0-511&gt;' doc='scrambling code' />

+        <param name='&lt;0-1&gt;' doc='diversity bit' />

+      </params>

+    </command>

+    <command id='si2quater neighbor-list del uarfcn &lt;0-16383&gt; &lt;0-511&gt;'>

+      <params>

+        <param name='si2quater' doc='SI2quater Neighbor List' />

+        <param name='neighbor-list' doc='SI2quater Neighbor List' />

+        <param name='del' doc='Delete from SI2quater manual neighbor list' />

+        <param name='uarfcn' doc='UARFCN of neighbor' />

+        <param name='&lt;0-16383&gt;' doc='UARFCN' />

+        <param name='&lt;0-511&gt;' doc='scrambling code' />

+      </params>

+    </command>

+    <command id='rf-lock-exclude'>

+      <params>

+        <param name='rf-lock-exclude' doc='Exclude this BTS from the global RF Lock' />

+      </params>

+    </command>

+    <command id='no rf-lock-exclude'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='rf-lock-exclude' doc='Exclude this BTS from the global RF Lock' />

+      </params>

+    </command>

+    <command id='force-combined-si'>

+      <params>

+        <param name='force-combined-si' doc='Force the generation of a single SI (no ter/bis)' />

+      </params>

+    </command>

+    <command id='no force-combined-si'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='force-combined-si' doc='Force the generation of a single SI (no ter/bis)' />

+      </params>

+    </command>

+    <command id='codec-support fr'>

+      <params>

+        <param name='codec-support' doc='Codec Support settings' />

+        <param name='fr' doc='Fullrate' />

+      </params>

+    </command>

+    <command id='codec-support fr (hr|efr|amr)'>

+      <params>

+        <param name='codec-support' doc='Codec Support settings' />

+        <param name='fr' doc='Fullrate' />

+        <param name='hr' doc='Half Rate' />

+        <param name='efr' doc='Enhanced Full Rate' />

+        <param name='amr' doc='Adaptive Multirate' />

+      </params>

+    </command>

+    <command id='codec-support fr (hr|efr|amr) (hr|efr|amr)'>

+      <params>

+        <param name='codec-support' doc='Codec Support settings' />

+        <param name='fr' doc='Fullrate' />

+        <param name='hr' doc='Half Rate' />

+        <param name='efr' doc='Enhanced Full Rate' />

+        <param name='amr' doc='Adaptive Multirate' />

+        <param name='hr' doc='Half Rate' />

+        <param name='efr' doc='Enhanced Full Rate' />

+        <param name='amr' doc='Adaptive Multirate' />

+      </params>

+    </command>

+    <command id='codec-support fr (hr|efr|amr) (hr|efr|amr) (hr|efr|amr)'>

+      <params>

+        <param name='codec-support' doc='Codec Support settings' />

+        <param name='fr' doc='Fullrate' />

+        <param name='hr' doc='Half Rate' />

+        <param name='efr' doc='Enhanced Full Rate' />

+        <param name='amr' doc='Adaptive Multirate' />

+        <param name='hr' doc='Half Rate' />

+        <param name='efr' doc='Enhanced Full Rate' />

+        <param name='amr' doc='Adaptive Multirate' />

+        <param name='hr' doc='Half Rate' />

+        <param name='efr' doc='Enhanced Full Rate' />

+        <param name='amr' doc='Adaptive Multirate' />

+      </params>

+    </command>

+    <command id='codec-support fr (hr|efr|amr) (hr|efr|amr) (hr|efr|amr) (hr|efr|amr)'>

+      <params>

+        <param name='codec-support' doc='Codec Support settings' />

+        <param name='fr' doc='Fullrate' />

+        <param name='hr' doc='Half Rate' />

+        <param name='efr' doc='Enhanced Full Rate' />

+        <param name='amr' doc='Adaptive Multirate' />

+        <param name='hr' doc='Half Rate' />

+        <param name='efr' doc='Enhanced Full Rate' />

+        <param name='amr' doc='Adaptive Multirate' />

+        <param name='hr' doc='Half Rate' />

+        <param name='efr' doc='Enhanced Full Rate' />

+        <param name='amr' doc='Adaptive Multirate' />

+        <param name='hr' doc='Half Rate' />

+        <param name='efr' doc='Enhanced Full Rate' />

+        <param name='amr' doc='Adaptive Multirate' />

+      </params>

+    </command>

+    <command id='depends-on-bts &lt;0-255&gt;'>

+      <params>

+        <param name='depends-on-bts' doc='This BTS can only be started if another one is up' />

+        <param name='&lt;0-255&gt;' doc='BTS Number' />

+      </params>

+    </command>

+    <command id='depeneds-on-bts &lt;0-255&gt;'>

+      <params>

+        <param name='depeneds-on-bts' doc='Negate a command or set its defaults' />

+        <param name='&lt;0-255&gt;' doc='This BTS can only be started if another one is up' />

+      </params>

+    </command>

+    <command id='amr tch-f modes (0|1|2|3|4|5|6|7)'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-f' doc='Full Rate' />

+        <param name='modes' doc='Codec modes to use with AMR codec' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='6' doc='10,2k' />

+        <param name='7' doc='12,2k' />

+      </params>

+    </command>

+    <command id='amr tch-f modes (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7)'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-f' doc='Full Rate' />

+        <param name='modes' doc='Codec modes to use with AMR codec' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='6' doc='10,2k' />

+        <param name='7' doc='12,2k' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='6' doc='10,2k' />

+        <param name='7' doc='12,2k' />

+      </params>

+    </command>

+    <command id='amr tch-f modes (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7)'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-f' doc='Full Rate' />

+        <param name='modes' doc='Codec modes to use with AMR codec' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='6' doc='10,2k' />

+        <param name='7' doc='12,2k' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='6' doc='10,2k' />

+        <param name='7' doc='12,2k' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='6' doc='10,2k' />

+        <param name='7' doc='12,2k' />

+      </params>

+    </command>

+    <command id='amr tch-f modes (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7)'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-f' doc='Full Rate' />

+        <param name='modes' doc='Codec modes to use with AMR codec' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='6' doc='10,2k' />

+        <param name='7' doc='12,2k' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='6' doc='10,2k' />

+        <param name='7' doc='12,2k' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='6' doc='10,2k' />

+        <param name='7' doc='12,2k' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='6' doc='10,2k' />

+        <param name='7' doc='12,2k' />

+      </params>

+    </command>

+    <command id='amr tch-f threshold (ms|bts) &lt;0-63&gt;'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-f' doc='Full Rate' />

+        <param name='threshold' doc='AMR threshold between codecs' />

+        <param name='ms' doc='MS side' />

+        <param name='bts' doc='BTS side' />

+        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />

+      </params>

+    </command>

+    <command id='amr tch-f threshold (ms|bts) &lt;0-63&gt; &lt;0-63&gt;'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-f' doc='Full Rate' />

+        <param name='threshold' doc='AMR threshold between codecs' />

+        <param name='ms' doc='MS side' />

+        <param name='bts' doc='BTS side' />

+        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />

+        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />

+      </params>

+    </command>

+    <command id='amr tch-f threshold (ms|bts) &lt;0-63&gt; &lt;0-63&gt; &lt;0-63&gt;'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-f' doc='Full Rate' />

+        <param name='threshold' doc='AMR threshold between codecs' />

+        <param name='ms' doc='MS side' />

+        <param name='bts' doc='BTS side' />

+        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />

+        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />

+        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />

+      </params>

+    </command>

+    <command id='amr tch-f hysteresis (ms|bts) &lt;0-15&gt;'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-f' doc='Full Rate' />

+        <param name='hysteresis' doc='AMR hysteresis between codecs' />

+        <param name='ms' doc='MS side' />

+        <param name='bts' doc='BTS side' />

+        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />

+      </params>

+    </command>

+    <command id='amr tch-f hysteresis (ms|bts) &lt;0-15&gt; &lt;0-15&gt;'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-f' doc='Full Rate' />

+        <param name='hysteresis' doc='AMR hysteresis between codecs' />

+        <param name='ms' doc='MS side' />

+        <param name='bts' doc='BTS side' />

+        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />

+        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />

+      </params>

+    </command>

+    <command id='amr tch-f hysteresis (ms|bts) &lt;0-15&gt; &lt;0-15&gt; &lt;0-15&gt;'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-f' doc='Full Rate' />

+        <param name='hysteresis' doc='AMR hysteresis between codecs' />

+        <param name='ms' doc='MS side' />

+        <param name='bts' doc='BTS side' />

+        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />

+        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />

+        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />

+      </params>

+    </command>

+    <command id='amr tch-f start-mode (auto|1|2|3|4)'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-f' doc='Full Rate' />

+        <param name='start-mode' doc='Initial codec to use with AMR' />

+        <param name='auto' doc='Automatically' />

+        <param name='1' doc='First codec' />

+        <param name='2' doc='Second codec' />

+        <param name='3' doc='Third codec' />

+        <param name='4' doc='Fourth codec' />

+      </params>

+    </command>

+    <command id='amr tch-h modes (0|1|2|3|4|5)'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-h' doc='Half Rate' />

+        <param name='modes' doc='Codec modes to use with AMR codec' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+      </params>

+    </command>

+    <command id='amr tch-h modes (0|1|2|3|4|5) (0|1|2|3|4|5)'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-h' doc='Half Rate' />

+        <param name='modes' doc='Codec modes to use with AMR codec' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+      </params>

+    </command>

+    <command id='amr tch-h modes (0|1|2|3|4|5) (0|1|2|3|4|5) (0|1|2|3|4|5)'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-h' doc='Half Rate' />

+        <param name='modes' doc='Codec modes to use with AMR codec' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+      </params>

+    </command>

+    <command id='amr tch-h modes (0|1|2|3|4|5) (0|1|2|3|4|5) (0|1|2|3|4|5) (0|1|2|3|4|5)'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-h' doc='Half Rate' />

+        <param name='modes' doc='Codec modes to use with AMR codec' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+        <param name='0' doc='4,75k' />

+        <param name='1' doc='5,15k' />

+        <param name='2' doc='5,90k' />

+        <param name='3' doc='6,70k' />

+        <param name='4' doc='7,40k' />

+        <param name='5' doc='7,95k' />

+      </params>

+    </command>

+    <command id='amr tch-h threshold (ms|bts) &lt;0-63&gt;'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-h' doc='Half Rate' />

+        <param name='threshold' doc='AMR threshold between codecs' />

+        <param name='ms' doc='MS side' />

+        <param name='bts' doc='BTS side' />

+        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />

+      </params>

+    </command>

+    <command id='amr tch-h threshold (ms|bts) &lt;0-63&gt; &lt;0-63&gt;'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-h' doc='Half Rate' />

+        <param name='threshold' doc='AMR threshold between codecs' />

+        <param name='ms' doc='MS side' />

+        <param name='bts' doc='BTS side' />

+        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />

+        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />

+      </params>

+    </command>

+    <command id='amr tch-h threshold (ms|bts) &lt;0-63&gt; &lt;0-63&gt; &lt;0-63&gt;'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-h' doc='Half Rate' />

+        <param name='threshold' doc='AMR threshold between codecs' />

+        <param name='ms' doc='MS side' />

+        <param name='bts' doc='BTS side' />

+        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />

+        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />

+        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />

+      </params>

+    </command>

+    <command id='amr tch-h hysteresis (ms|bts) &lt;0-15&gt;'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-h' doc='Half Rate' />

+        <param name='hysteresis' doc='AMR hysteresis between codecs' />

+        <param name='ms' doc='MS side' />

+        <param name='bts' doc='BTS side' />

+        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />

+      </params>

+    </command>

+    <command id='amr tch-h hysteresis (ms|bts) &lt;0-15&gt; &lt;0-15&gt;'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-h' doc='Half Rate' />

+        <param name='hysteresis' doc='AMR hysteresis between codecs' />

+        <param name='ms' doc='MS side' />

+        <param name='bts' doc='BTS side' />

+        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />

+        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />

+      </params>

+    </command>

+    <command id='amr tch-h hysteresis (ms|bts) &lt;0-15&gt; &lt;0-15&gt; &lt;0-15&gt;'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-h' doc='Half Rate' />

+        <param name='hysteresis' doc='AMR hysteresis between codecs' />

+        <param name='ms' doc='MS side' />

+        <param name='bts' doc='BTS side' />

+        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />

+        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />

+        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />

+      </params>

+    </command>

+    <command id='amr tch-h start-mode (auto|1|2|3|4)'>

+      <params>

+        <param name='amr' doc='Adaptive Multi Rate settings' />

+        <param name='tch-h' doc='Half Rate' />

+        <param name='start-mode' doc='Initial codec to use with AMR' />

+        <param name='auto' doc='Automatically' />

+        <param name='1' doc='First codec' />

+        <param name='2' doc='Second codec' />

+        <param name='3' doc='Third codec' />

+        <param name='4' doc='Fourth codec' />

+      </params>

+    </command>

+    <command id='pcu-socket PATH'>

+      <params>

+        <param name='pcu-socket' doc='PCU Socket Path for using OsmoPCU co-located with BSC (legacy BTS)' />

+        <param name='PATH' doc='Path in the file system for the unix-domain PCU socket' />

+      </params>

+    </command>

+    <command id='trx &lt;0-255&gt;'>

+      <params>

+        <param name='trx' doc='Radio Transceiver' />

+        <param name='&lt;0-255&gt;' doc='Select a TRX to configure' />

+      </params>

+    </command>

+    <command id='is-connection-list (add|del) &lt;0-2047&gt; &lt;0-2047&gt; &lt;0-255&gt;'>

+      <params>

+        <param name='is-connection-list' doc='Interface Switch Connection List' />

+        <param name='add' doc='Add to IS list' />

+        <param name='del' doc='Delete from IS list' />

+        <param name='&lt;0-2047&gt;' doc='ICP1' />

+        <param name='&lt;0-2047&gt;' doc='ICP2' />

+        <param name='&lt;0-255&gt;' doc='Contiguity Index' />

+      </params>

+    </command>

+    <command id='abis-lower-transport (single-timeslot|super-channel)'>

+      <params>

+        <param name='abis-lower-transport' doc='Configure thee Abis Lower Transport' />

+        <param name='single-timeslot' doc='Single Timeslot (classic Abis)' />

+        <param name='super-channel' doc='SuperChannel (Packet Abis)' />

+      </params>

+    </command>

+    <command id='con-connection-group &lt;1-31&gt;'>

+      <params>

+        <param name='con-connection-group' doc='Configure a CON (Concentrator) Connection Group' />

+        <param name='&lt;1-31&gt;' doc='CON Connection Group Number' />

+      </params>

+    </command>

+    <command id='del-connection-group &lt;1-31&gt;'>

+      <params>

+        <param name='del-connection-group' doc='Delete a CON (Concentrator) Connection Group' />

+        <param name='&lt;1-31&gt;' doc='CON Connection Group Number' />

+      </params>

+    </command>

+  </node>

+  <node id='config-net-bts-trx'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='arfcn &lt;0-1023&gt;'>

+      <params>

+        <param name='arfcn' doc='Set the ARFCN for this TRX' />

+        <param name='&lt;0-1023&gt;' doc='Absolute Radio Frequency Channel Number' />

+      </params>

+    </command>

+    <command id='description .TEXT'>

+      <params>

+        <param name='description' doc='Save human-readable description of the object' />

+        <param name='.TEXT' doc='Text until the end of the line' />

+      </params>

+    </command>

+    <command id='no description'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='description' doc='Remove description of the object' />

+      </params>

+    </command>

+    <command id='nominal power &lt;0-100&gt;'>

+      <params>

+        <param name='nominal' doc='Nominal TRX RF Power in dBm' />

+        <param name='power' doc='Nominal TRX RF Power in dBm' />

+        <param name='&lt;0-100&gt;' doc='Nominal TRX RF Power in dBm' />

+      </params>

+    </command>

+    <command id='max_power_red &lt;0-100&gt;'>

+      <params>

+        <param name='max_power_red' doc='Reduction of maximum BS RF Power (relative to nominal power)' />

+        <param name='&lt;0-100&gt;' doc='Reduction of maximum BS RF Power in dB' />

+      </params>

+    </command>

+    <command id='rsl e1 line E1_LINE timeslot &lt;1-31&gt; sub-slot (0|1|2|3|full)'>

+      <params>

+        <param name='rsl' doc='RSL Parameters' />

+        <param name='e1' doc='E1/T1 interface to be used for RSL' />

+        <param name='line' doc='E1/T1 interface to be used for RSL' />

+        <param name='E1_LINE' doc='E1/T1 Line Number to be used for RSL' />

+        <param name='timeslot' doc='E1/T1 Timeslot to be used for RSL' />

+        <param name='&lt;1-31&gt;' doc='E1/T1 Timeslot to be used for RSL' />

+        <param name='sub-slot' doc='E1/T1 Sub-slot to be used for RSL' />

+        <param name='0' doc='E1/T1 Sub-slot 0 is to be used for RSL' />

+        <param name='1' doc='E1/T1 Sub-slot 1 is to be used for RSL' />

+        <param name='2' doc='E1/T1 Sub-slot 2 is to be used for RSL' />

+        <param name='3' doc='E1/T1 Sub-slot 3 is to be used for RSL' />

+        <param name='full' doc='E1/T1 full timeslot is to be used for RSL' />

+      </params>

+    </command>

+    <command id='rsl e1 tei &lt;0-63&gt;'>

+      <params>

+        <param name='rsl' doc='RSL Parameters' />

+        <param name='e1' doc='Set the TEI to be used for RSL' />

+        <param name='tei' doc='Set the TEI to be used for RSL' />

+        <param name='&lt;0-63&gt;' doc='TEI to be used for RSL' />

+      </params>

+    </command>

+    <command id='rf_locked (0|1)'>

+      <params>

+        <param name='rf_locked' doc='Set or unset the RF Locking (Turn off RF of the TRX)' />

+        <param name='0' doc='TRX is NOT RF locked (active)' />

+        <param name='1' doc='TRX is RF locked (turned off)' />

+      </params>

+    </command>

+    <command id='timeslot &lt;0-7&gt;'>

+      <params>

+        <param name='timeslot' doc='Select a Timeslot to configure' />

+        <param name='&lt;0-7&gt;' doc='Timeslot number' />

+      </params>

+    </command>

+  </node>

+  <node id='config-net-bts-trx-ts'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='phys_chan_config (none|ccch|ccch+sdcch4|tch/f|tch/h|sdcch8|pdch|tch/f_pdch|unknown|ccch+sdcch4+cbch|sdcch8+cbch|tch/f_tch/h_pdch)'>

+      <params>

+        <param name='phys_chan_config' doc='Physical Channel Combination' />

+        <param name='none' doc='Physical Channel not configured' />

+        <param name='ccch' doc='FCCH + SCH + BCCH + CCCH (Comb. IV)' />

+        <param name='ccch+sdcch4' doc='FCCH + SCH + BCCH + CCCH + 4 SDCCH + 2 SACCH (Comb. V)' />

+        <param name='tch/f' doc='TCH/F + FACCH/F + SACCH (Comb. I)' />

+        <param name='tch/h' doc='2 TCH/H + 2 FACCH/H + 2 SACCH (Comb. II)' />

+        <param name='sdcch8' doc='8 SDCCH + 4 SACCH (Comb. VII)' />

+        <param name='pdch' doc='Packet Data Channel for GPRS/EDGE' />

+        <param name='tch/f_pdch' doc='Dynamic TCH/F or GPRS PDCH' />

+        <param name='unknown' doc='Unknown / Unsupported channel combination' />

+        <param name='ccch+sdcch4+cbch' doc='FCCH + SCH + BCCH + CCCH + CBCH + 3 SDCCH + 2 SACCH (Comb. V)' />

+        <param name='sdcch8+cbch' doc='7 SDCCH + 4 SACCH + CBCH (Comb. VII)' />

+        <param name='tch/f_tch/h_pdch' doc='Dynamic TCH/F or TCH/H or GPRS PDCH' />

+      </params>

+    </command>

+    <command id='phys_chan_config PCHAN'>

+      <params>

+        <param name='phys_chan_config' doc='Physical Channel configuration (TCH/SDCCH/...)' />

+        <param name='PCHAN' doc='Physical Channel' />

+      </params>

+    </command>

+    <command id='training_sequence_code &lt;0-7&gt;'>

+      <params>

+        <param name='training_sequence_code' doc='Training Sequence Code of the Timeslot' />

+        <param name='&lt;0-7&gt;' doc='TSC' />

+      </params>

+    </command>

+    <command id='hopping enabled (0|1)'>

+      <params>

+        <param name='hopping' doc='Configure frequency hopping' />

+        <param name='enabled' doc='Enable or disable frequency hopping' />

+        <param name='0' doc='Disable frequency hopping' />

+        <param name='1' doc='Enable frequency hopping' />

+      </params>

+    </command>

+    <command id='hopping sequence-number &lt;0-63&gt;'>

+      <params>

+        <param name='hopping' doc='Configure frequency hopping' />

+        <param name='sequence-number' doc='Which hopping sequence to use for this channel' />

+        <param name='&lt;0-63&gt;' doc='Hopping Sequence Number (HSN)' />

+      </params>

+    </command>

+    <command id='hopping maio &lt;0-63&gt;'>

+      <params>

+        <param name='hopping' doc='Configure frequency hopping' />

+        <param name='maio' doc='Which hopping MAIO to use for this channel' />

+        <param name='&lt;0-63&gt;' doc='Mobile Allocation Index Offset (MAIO)' />

+      </params>

+    </command>

+    <command id='hopping arfcn add &lt;0-1023&gt;'>

+      <params>

+        <param name='hopping' doc='Configure frequency hopping' />

+        <param name='arfcn' doc='Configure hopping ARFCN list' />

+        <param name='add' doc='Add an entry to the hopping ARFCN list' />

+        <param name='&lt;0-1023&gt;' doc='ARFCN' />

+      </params>

+    </command>

+    <command id='hopping arfcn del &lt;0-1023&gt;'>

+      <params>

+        <param name='hopping' doc='Configure frequency hopping' />

+        <param name='arfcn' doc='Configure hopping ARFCN list' />

+        <param name='del' doc='Delete an entry to the hopping ARFCN list' />

+        <param name='&lt;0-1023&gt;' doc='ARFCN' />

+      </params>

+    </command>

+    <command id='e1 line E1_LINE timeslot &lt;1-31&gt; sub-slot (0|1|2|3|full)'>

+      <params>

+        <param name='e1' doc='E1/T1 channel connected to this on-air timeslot' />

+        <param name='line' doc='E1/T1 channel connected to this on-air timeslot' />

+        <param name='E1_LINE' doc='E1/T1 line connected to this on-air timeslot' />

+        <param name='timeslot' doc='E1/T1 timeslot connected to this on-air timeslot' />

+        <param name='&lt;1-31&gt;' doc='E1/T1 timeslot connected to this on-air timeslot' />

+        <param name='sub-slot' doc='E1/T1 sub-slot connected to this on-air timeslot' />

+        <param name='0' doc='E1/T1 sub-slot 0 connected to this on-air timeslot' />

+        <param name='1' doc='E1/T1 sub-slot 1 connected to this on-air timeslot' />

+        <param name='2' doc='E1/T1 sub-slot 2 connected to this on-air timeslot' />

+        <param name='3' doc='E1/T1 sub-slot 3 connected to this on-air timeslot' />

+        <param name='full' doc='Full E1/T1 timeslot connected to this on-air timeslot' />

+      </params>

+    </command>

+  </node>

+  <node id='oml'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='change-adm-state (locked|unlocked|shutdown|null)'>

+      <params>

+        <param name='change-adm-state' doc='Change the Administrative State' />

+        <param name='locked' doc='Locked' />

+        <param name='unlocked' doc='Unlocked' />

+        <param name='shutdown' doc='Shutdown' />

+        <param name='null' doc='NULL' />

+      </params>

+    </command>

+    <command id='opstart'>

+      <params>

+        <param name='opstart' doc='Send an OPSTART message to the object' />

+      </params>

+    </command>

+  </node>

+  <node id='om2k'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='reset-command'>

+      <params>

+        <param name='reset-command' doc='Reset the MO' />

+      </params>

+    </command>

+    <command id='start-request'>

+      <params>

+        <param name='start-request' doc='Start the MO' />

+      </params>

+    </command>

+    <command id='status-request'>

+      <params>

+        <param name='status-request' doc='Get the MO Status' />

+      </params>

+    </command>

+    <command id='connect-command'>

+      <params>

+        <param name='connect-command' doc='Connect the MO' />

+      </params>

+    </command>

+    <command id='disconnect-command'>

+      <params>

+        <param name='disconnect-command' doc='Disconnect the MO' />

+      </params>

+    </command>

+    <command id='enable-request'>

+      <params>

+        <param name='enable-request' doc='Enable the MO' />

+      </params>

+    </command>

+    <command id='disable-request'>

+      <params>

+        <param name='disable-request' doc='Disable the MO' />

+      </params>

+    </command>

+    <command id='operational-info &lt;0-1&gt;'>

+      <params>

+        <param name='operational-info' doc='Set operational information' />

+        <param name='&lt;0-1&gt;' doc='Set operational info to 0 or 1' />

+      </params>

+    </command>

+    <command id='test-request'>

+      <params>

+        <param name='test-request' doc='Test the MO' />

+      </params>

+    </command>

+    <command id='capabilities-request'>

+      <params>

+        <param name='capabilities-request' doc='Request MO capabilities' />

+      </params>

+    </command>

+    <command id='configuration-request'>

+      <params>

+        <param name='configuration-request' doc='Send the configuration request for current MO' />

+      </params>

+    </command>

+  </node>

+  <node id='om2k-con-group'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='con-path (add|del) &lt;0-2047&gt; &lt;0-255&gt; deconcentrated &lt;0-63&gt;'>

+      <params>

+        <param name='con-path' doc='CON Path (In/Out)' />

+        <param name='add' doc='Add CON Path to Concentration Group' />

+        <param name='del' doc='Delete CON Path from Concentration Group' />

+        <param name='&lt;0-2047&gt;' doc='CON Conection Point' />

+        <param name='&lt;0-255&gt;' doc='Contiguity Index' />

+        <param name='deconcentrated' doc='De-concentrated in/outlet' />

+        <param name='&lt;0-63&gt;' doc='TEI Value' />

+      </params>

+    </command>

+    <command id='con-path (add|del) &lt;0-2047&gt; &lt;0-255&gt; concentrated &lt;1-16&gt;'>

+      <params>

+        <param name='con-path' doc='CON Path (In/Out)' />

+        <param name='add' doc='Add CON Path to Concentration Group' />

+        <param name='del' doc='Delete CON Path from Concentration Group' />

+        <param name='&lt;0-2047&gt;' doc='CON Conection Point' />

+        <param name='&lt;0-255&gt;' doc='Contiguity Index' />

+        <param name='concentrated' doc='Concentrated in/outlet' />

+        <param name='&lt;1-16&gt;' doc='Tag Number' />

+      </params>

+    </command>

+  </node>

+  <node id='config-mncc-int'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='default-codec tch-f (fr|efr|amr)'>

+      <params>

+        <param name='default-codec' doc='Set default codec' />

+        <param name='tch-f' doc='Codec for TCH/F' />

+        <param name='fr' doc='Full-Rate' />

+        <param name='efr' doc='Enhanced Full-Rate' />

+        <param name='amr' doc='Adaptive Multi-Rate' />

+      </params>

+    </command>

+    <command id='default-codec tch-h (hr|amr)'>

+      <params>

+        <param name='default-codec' doc='Set default codec' />

+        <param name='tch-h' doc='Codec for TCH/H' />

+        <param name='hr' doc='Half-Rate' />

+        <param name='amr' doc='Adaptive Multi-Rate' />

+      </params>

+    </command>

+    <command id='meas-feed destination ADDR &lt;0-65535&gt;'>

+      <params>

+        <param name='meas-feed' doc='Measurement export related' />

+        <param name='destination' doc='destination' />

+        <param name='ADDR' doc='address or hostname' />

+        <param name='&lt;0-65535&gt;' doc='port number' />

+      </params>

+    </command>

+    <command id='meas-feed scenario NAME'>

+      <params>

+        <param name='meas-feed' doc='Measurement export related' />

+        <param name='scenario' doc='scenario' />

+        <param name='NAME' doc='Name up to 31 characters included in report' />

+      </params>

+    </command>

+  </node>

+  <node id='config-nitb'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='subscriber-create-on-demand [no-extension]'>

+      <params>

+        <param name='subscriber-create-on-demand' doc='Make a new record when a subscriber is first seen.' />

+        <param name='[no-extension]' doc='Do not automatically assign extension to created subscribers' />

+      </params>

+    </command>

+    <command id='subscriber-create-on-demand random &lt;1-9999999999&gt; &lt;2-9999999999&gt;'>

+      <params>

+        <param name='subscriber-create-on-demand' doc='Set random parameters for a new record when a subscriber is first seen.' />

+        <param name='random' doc='Set random parameters for a new record when a subscriber is first seen.' />

+        <param name='&lt;1-9999999999&gt;' doc='Minimum for subscriber extension' />

+        <param name='&lt;2-9999999999&gt;' doc='Maximum for subscriber extension' />

+      </params>

+    </command>

+    <command id='no subscriber-create-on-demand'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='subscriber-create-on-demand' doc='Make a new record when a subscriber is first seen.' />

+      </params>

+    </command>

+    <command id='assign-tmsi'>

+      <params>

+        <param name='assign-tmsi' doc='Assign TMSI during Location Updating.' />

+      </params>

+    </command>

+    <command id='no assign-tmsi'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='assign-tmsi' doc='Assign TMSI during Location Updating.' />

+      </params>

+    </command>

+  </node>

+  <node id='config-smpp'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='smpp-first'>

+      <params>

+        <param name='smpp-first' doc='Try SMPP routes before the subscriber DB' />

+      </params>

+    </command>

+    <command id='no smpp-first'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='smpp-first' doc='Try SMPP before routes before the subscriber DB' />

+      </params>

+    </command>

+    <command id='local-tcp-port &lt;1-65535&gt;'>

+      <params>

+        <param name='local-tcp-port' doc='Set the local TCP port on which we listen for SMPP' />

+        <param name='&lt;1-65535&gt;' doc='TCP port number' />

+      </params>

+    </command>

+    <command id='local-tcp-ip A.B.C.D &lt;1-65535&gt;'>

+      <params>

+        <param name='local-tcp-ip' doc='Set the local IP address and TCP port on which we listen for SMPP' />

+        <param name='A.B.C.D' doc='Local IP address' />

+        <param name='&lt;1-65535&gt;' doc='TCP port number' />

+      </params>

+    </command>

+    <command id='system-id ID'>

+      <params>

+        <param name='system-id' doc='Set the System ID of this SMSC' />

+        <param name='ID' doc='Alphanumeric SMSC System ID' />

+      </params>

+    </command>

+    <command id='policy (accept-all|closed)'>

+      <params>

+        <param name='policy' doc='Set the authentication policy of this SMSC' />

+        <param name='accept-all' doc='Accept all SMPP connections independeint of system ID / passwd' />

+        <param name='closed' doc='Accept only SMPP connections from ESMEs explicitly configured' />

+      </params>

+    </command>

+    <command id='esme NAME'>

+      <params>

+        <param name='esme' doc='Configure a particular ESME' />

+        <param name='NAME' doc='Alphanumeric System ID of the ESME to be configured' />

+      </params>

+    </command>

+    <command id='no esme NAME'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='esme' doc='Remove ESME configuration' />

+        <param name='NAME' doc='Alphanumeric System ID of the ESME to be removed' />

+      </params>

+    </command>

+  </node>

+  <node id='config-smpp-esme'>

+    <command id='help'>

+      <params>

+        <param name='help' doc='Description of the interactive help system' />

+      </params>

+    </command>

+    <command id='list'>

+      <params>

+        <param name='list' doc='Print command list' />

+      </params>

+    </command>

+    <command id='write terminal'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='terminal' doc='Write to terminal' />

+      </params>

+    </command>

+    <command id='write file'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='file' doc='Write to configuration file' />

+      </params>

+    </command>

+    <command id='write memory'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+        <param name='memory' doc='Write configuration to the file (same as write file)' />

+      </params>

+    </command>

+    <command id='write'>

+      <params>

+        <param name='write' doc='Write running configuration to memory, network, or terminal' />

+      </params>

+    </command>

+    <command id='show running-config'>

+      <params>

+        <param name='show' doc='Show running system information' />

+        <param name='running-config' doc='running configuration' />

+      </params>

+    </command>

+    <command id='exit'>

+      <params>

+        <param name='exit' doc='Exit current mode and down to previous mode' />

+      </params>

+    </command>

+    <command id='end'>

+      <params>

+        <param name='end' doc='End current mode and change to enable mode.' />

+      </params>

+    </command>

+    <command id='password PASSWORD'>

+      <params>

+        <param name='password' doc='Set the password for this ESME' />

+        <param name='PASSWORD' doc='Alphanumeric password string' />

+      </params>

+    </command>

+    <command id='no password'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='password' doc='Remove the password for this ESME' />

+      </params>

+    </command>

+    <command id='route prefix (unknown|international|national|network|subscriber|alpha|abbrev) (unknown|isdn|x121|f69|e212|national|private|ermes|ip|wap) PREFIX'>

+      <params>

+        <param name='route' doc='Configure a route for MO-SMS to be sent to this ESME' />

+        <param name='prefix' doc='Prefix-match route' />

+        <param name='unknown' doc='Unknown type-of-number' />

+        <param name='international' doc='International type-of-number' />

+        <param name='national' doc='National type-of-number' />

+        <param name='network' doc='Network specific type-of-number' />

+        <param name='subscriber' doc='Subscriber type-of-number' />

+        <param name='alpha' doc='Alphanumeric type-of-number' />

+        <param name='abbrev' doc='Abbreviated type-of-number' />

+        <param name='unknown' doc='Unknown numbering plan' />

+        <param name='isdn' doc='ISDN (E.164) numbering plan' />

+        <param name='x121' doc='X.121 numbering plan' />

+        <param name='f69' doc='F.69 numbering plan' />

+        <param name='e212' doc='E.212 numbering plan' />

+        <param name='national' doc='National numbering plan' />

+        <param name='private' doc='Private numbering plan' />

+        <param name='ermes' doc='ERMES numbering plan' />

+        <param name='ip' doc='IP numbering plan' />

+        <param name='wap' doc='WAP numbeing plan' />

+        <param name='PREFIX' doc='Destination number prefix' />

+      </params>

+    </command>

+    <command id='no route prefix (unknown|international|national|network|subscriber|alpha|abbrev) (unknown|isdn|x121|f69|e212|national|private|ermes|ip|wap) PREFIX'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='route' doc='Configure a route for MO-SMS to be sent to this ESME' />

+        <param name='prefix' doc='Prefix-match route' />

+        <param name='unknown' doc='Unknown type-of-number' />

+        <param name='international' doc='International type-of-number' />

+        <param name='national' doc='National type-of-number' />

+        <param name='network' doc='Network specific type-of-number' />

+        <param name='subscriber' doc='Subscriber type-of-number' />

+        <param name='alpha' doc='Alphanumeric type-of-number' />

+        <param name='abbrev' doc='Abbreviated type-of-number' />

+        <param name='unknown' doc='Unknown numbering plan' />

+        <param name='isdn' doc='ISDN (E.164) numbering plan' />

+        <param name='x121' doc='X.121 numbering plan' />

+        <param name='f69' doc='F.69 numbering plan' />

+        <param name='e212' doc='E.212 numbering plan' />

+        <param name='national' doc='National numbering plan' />

+        <param name='private' doc='Private numbering plan' />

+        <param name='ermes' doc='ERMES numbering plan' />

+        <param name='ip' doc='IP numbering plan' />

+        <param name='wap' doc='WAP numbeing plan' />

+        <param name='PREFIX' doc='Destination number prefix' />

+      </params>

+    </command>

+    <command id='default-route'>

+      <params>

+        <param name='default-route' doc='Set this ESME as default-route for all SMS to unknown destinations' />

+      </params>

+    </command>

+    <command id='no default-route'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='default-route' doc='Remove this ESME as default-route for all SMS to unknown destinations' />

+      </params>

+    </command>

+    <command id='deliver-src-imsi'>

+      <params>

+        <param name='deliver-src-imsi' doc='Enable the use of IMSI as source address in DELIVER' />

+      </params>

+    </command>

+    <command id='no deliver-src-imsi'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='deliver-src-imsi' doc='Disable the use of IMSI as source address in DELIVER' />

+      </params>

+    </command>

+    <command id='osmocom-extensions'>

+      <params>

+        <param name='osmocom-extensions' doc='Enable the use of Osmocom SMPP Extensions for this ESME' />

+      </params>

+    </command>

+    <command id='no osmocom-extensions'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='osmocom-extensions' doc='Disable the use of Osmocom SMPP Extensions for this ESME' />

+      </params>

+    </command>

+    <command id='dcs-transparent'>

+      <params>

+        <param name='dcs-transparent' doc='Enable the transparent pass-through of TP-DCS to SMPP DataCoding' />

+      </params>

+    </command>

+    <command id='no dcs-transparent'>

+      <params>

+        <param name='no' doc='Negate a command or set its defaults' />

+        <param name='dcs-transparent' doc='Disable the transparent pass-through of TP-DCS to SMPP DataCoding' />

+      </params>

+    </command>

+  </node>

+</vtydoc>
\ No newline at end of file