################################################################################# # # config file for DMR BS TX # ################################################################################# # # DMR Encoder (C) Copyright 2017 Max H. Parke KA1RBI # # This file is part of OP25 # # This is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3, or (at your option) # any later version. # # This software is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this software; see the file COPYING. If not, write to # the Free Software Foundation, Inc., 51 Franklin Street, # Boston, MA 02110-1301, USA. ################################################################################# # # NOTE # # Everything in this file is doubled up due to the two slot TDMA. # # For example "en1" is for slot 1 and "en2" is for slot 2 # # Syntax is unforgiving - no whitespace allowed (outside of comments) # # ################################################################################# # # slot enable [1 bit: 0=disable; 1=enable] # - transmits voice sync when enabled, idle slot sync when disabled # - the GR block consumes input samples on both channels (whether or not enabled) # en1=1 en2=1 ################################################################################# # # color code [4 bits] # cc1=1 cc2=1 ################################################################################# # # Activity Update # - source: spec volume 2 para 7.1.3.2 # - specify the hashed address [8 bits] # - compressed destination address 1 and destination address 2 # - typically set to zero [?] # ts1=0 ts2=0 ################################################################################# # # Group Voice Channel User LC PDU # - source: spec volume 2 paragraph 7.1.1.1 # - the so/ga/sa (Service Options/[talk]Group Address/Source Address) # - values are specified in decimal [so: 8 bits; sa and ga: 24 bits] # - service options are typically set to zero [?] # so1=0 so2=0 ga1=1 ga2=311 sa1=1 sa2=1