Initial check-in.

5 files changed, 206 insertions, 0 deletions

diff --git a/op25/gr-op25_repeater/grc/CMakeLists.txt b/op25/gr-op25_repeater/grc/CMakeLists.txt
new file mode 100644
index 0000000..f0389b4
--- /dev/null
+++ b/op25/gr-op25_repeater/grc/CMakeLists.txt
@@ -0,0 +1,24 @@
+# Copyright 2011 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+install(FILES
+    op25_repeater_vocoder.xml
+    op25_repeater_gardner_costas_cc.xml
+    op25_repeater_p25_frame_assembler.xml
+    op25_repeater_fsk4_slicer_fb.xml DESTINATION share/gnuradio/grc/blocks
+)
diff --git a/op25/gr-op25_repeater/grc/op25_repeater_fsk4_slicer_fb.xml b/op25/gr-op25_repeater/grc/op25_repeater_fsk4_slicer_fb.xml
new file mode 100644
index 0000000..403e89e
--- /dev/null
+++ b/op25/gr-op25_repeater/grc/op25_repeater_fsk4_slicer_fb.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0"?>
+<block>
+  <name>fsk4_slicer_fb</name>
+  <key>op25_repeater_fsk4_slicer_fb</key>
+  <category>op25_repeater</category>
+  <import>import op25_repeater</import>
+  <make>op25_repeater.fsk4_slicer_fb($&slice_levels)</make>
+  <!-- Make one 'param' node for every Parameter you want settable from the GUI.
+       Sub-nodes:
+       * name
+       * key (makes the value accessible as $keyname, e.g. in the make node)
+       * type -->
+  <param>
+    <name>...</name>
+    <key>...</key>
+    <type>...</type>
+  </param>
+
+  <!-- Make one 'sink' node per input. Sub-nodes:
+       * name (an identifier for the GUI)
+       * type
+       * vlen
+       * optional (set to 1 for optional inputs) -->
+  <sink>
+    <name>in</name>
+    <type><!-- e.g. int, float, complex, byte, short, xxx_vector, ...--></type>
+  </sink>
+
+  <!-- Make one 'source' node per output. Sub-nodes:
+       * name (an identifier for the GUI)
+       * type
+       * vlen
+       * optional (set to 1 for optional inputs) -->
+  <source>
+    <name>out</name>
+    <type><!-- e.g. int, float, complex, byte, short, xxx_vector, ...--></type>
+  </source>
+</block>
diff --git a/op25/gr-op25_repeater/grc/op25_repeater_gardner_costas_cc.xml b/op25/gr-op25_repeater/grc/op25_repeater_gardner_costas_cc.xml
new file mode 100644
index 0000000..313ed4b
--- /dev/null
+++ b/op25/gr-op25_repeater/grc/op25_repeater_gardner_costas_cc.xml
@@ -0,0 +1,68 @@
+<?xml version="1.0"?>
+<block>
+  <name>gardner_costas_cc</name>
+  <key>op25_repeater_gardner_costas_cc</key>
+  <category>op25_repeater</category>
+  <import>import op25_repeater</import>
+  <make>op25_repeater.gardner_costas_cc($samples_per_symbol, $gain_mu, $gain_omega, $alpha, $beta, $max_freq, $min_freq)</make>
+  <!-- Make one 'param' node for every Parameter you want settable from the GUI.
+       Sub-nodes:
+       * name
+       * key (makes the value accessible as $keyname, e.g. in the make node)
+       * type -->
+  <param>
+    <name>Samples Per Symbol</name>
+    <key>samples_per_symbol</key>
+    <type>float</type>
+  </param>
+  <param>
+    <name>Gain Mu</name>
+    <key>gain_mu</key>
+    <type>float</type>
+  </param>
+  <param>
+    <name>Gain Omega</name>
+    <key>gain_omega</key>
+    <type>float</type>
+  </param>
+  <param>
+    <name>Alpha</name>
+    <key>alpha</key>
+    <type>float</type>
+  </param>
+  <param>
+    <name>Beta</name>
+    <key>beta</key>
+    <type>float</type>
+  </param>
+  <param>
+    <name>Maximum Frequency</name>
+    <key>max_freq</key>
+    <type>float</type>
+  </param>
+  <param>
+    <name>Mininum Frequency</name>
+    <key>min_freq</key>
+    <type>float</type>
+  </param>
+
+  <!-- Make one 'sink' node per input. Sub-nodes:
+       * name (an identifier for the GUI)
+       * type
+       * vlen
+       * optional (set to 1 for optional inputs) -->
+  <sink>
+    <name>in</name>
+    <type>complex</type>
+  </sink>
+
+  <!-- Make one 'source' node per output. Sub-nodes:
+       * name (an identifier for the GUI)
+       * type
+       * vlen
+       * optional (set to 1 for optional inputs) -->
+  <source>
+    <name>out</name>
+    <type>complex</type>
+  </source>
+</block>
diff --git a/op25/gr-op25_repeater/grc/op25_repeater_p25_frame_assembler.xml b/op25/gr-op25_repeater/grc/op25_repeater_p25_frame_assembler.xml
new file mode 100644
index 0000000..bbff967
--- /dev/null
+++ b/op25/gr-op25_repeater/grc/op25_repeater_p25_frame_assembler.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0"?>
+<block>
+  <name>p25_frame_assembler</name>
+  <key>op25_repeater_p25_frame_assembler</key>
+  <category>op25_repeater</category>
+  <import>import op25_repeater</import>
+  <make>op25_repeater.p25_frame_assembler($udp_host, $port, $debug, $do_imbe, $do_output, $do_msgq, $queue)</make>
+  <!-- Make one 'param' node for every Parameter you want settable from the GUI.
+       Sub-nodes:
+       * name
+       * key (makes the value accessible as $keyname, e.g. in the make node)
+       * type -->
+  <param>
+    <name>...</name>
+    <key>...</key>
+    <type>...</type>
+  </param>
+
+  <!-- Make one 'sink' node per input. Sub-nodes:
+       * name (an identifier for the GUI)
+       * type
+       * vlen
+       * optional (set to 1 for optional inputs) -->
+  <sink>
+    <name>in</name>
+    <type><!-- e.g. int, float, complex, byte, short, xxx_vector, ...--></type>
+  </sink>
+
+  <!-- Make one 'source' node per output. Sub-nodes:
+       * name (an identifier for the GUI)
+       * type
+       * vlen
+       * optional (set to 1 for optional inputs) -->
+  <source>
+    <name>out</name>
+    <type><!-- e.g. int, float, complex, byte, short, xxx_vector, ...--></type>
+  </source>
+</block>
diff --git a/op25/gr-op25_repeater/grc/op25_repeater_vocoder.xml b/op25/gr-op25_repeater/grc/op25_repeater_vocoder.xml
new file mode 100644
index 0000000..9a31cd5
--- /dev/null
+++ b/op25/gr-op25_repeater/grc/op25_repeater_vocoder.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0"?>
+<block>
+  <name>vocoder</name>
+  <key>op25_repeater_vocoder</key>
+  <category>op25_repeater</category>
+  <import>import op25_repeater</import>
+  <make>op25_repeater.vocoder($encode_flag, $verbose_flag, $stretch_amt, $udp_host, $udp_port, $raw_vectors_flag)</make>
+  <!-- Make one 'param' node for every Parameter you want settable from the GUI.
+       Sub-nodes:
+       * name
+       * key (makes the value accessible as $keyname, e.g. in the make node)
+       * type -->
+  <param>
+    <name>...</name>
+    <key>...</key>
+    <type>...</type>
+  </param>
+
+  <!-- Make one 'sink' node per input. Sub-nodes:
+       * name (an identifier for the GUI)
+       * type
+       * vlen
+       * optional (set to 1 for optional inputs) -->
+  <sink>
+    <name>in</name>
+    <type><!-- e.g. int, float, complex, byte, short, xxx_vector, ...--></type>
+  </sink>
+
+  <!-- Make one 'source' node per output. Sub-nodes:
+       * name (an identifier for the GUI)
+       * type
+       * vlen
+       * optional (set to 1 for optional inputs) -->
+  <source>
+    <name>out</name>
+    <type><!-- e.g. int, float, complex, byte, short, xxx_vector, ...--></type>
+  </source>
+</block>